ASA using only the IPS?

Similar Questions

• Any possibility using only the built-in GPU?

  Mac OS X 10.11.6

  MacBook Pro(Retina,15 ",2015 mid)

  With graphics cards AMD one dedicated

  I wonder if it is possible to use only the GPU integrated while playing games. Cause I discovered that some games are no need to use the AMD GPU, but it is automatically switched to the dedicated GPU and drains the battery.

  Hope there is a solution for this problem. Thank you!

  It is somehow a conditional scenario suggested in this article

  on how to make some graphics settings may remain in service, here:

  • Set performance on MacBook Pro - Apple Support chart

  • MacBook Pro: how determine what GPU is in use - Apple Support

  {These links seem to show older versions of material your model}.

  Don't know if there is a way hidden within the system to change the default to

  stay on the one you want to be the first choice; Maybe in the command 'terminal '?

  In any case...

  Good luck in this case!

• 6 sending to an iphone video to youtube (source UTube's cell phone) to a mountain BIKE if there is NO wi - fi, which uses only the airport.

  Cans an iphone 6 send video phone to an ATV if No. wi - fi exists, that uses only the airport.

  Unless both the phone and the ATV are connected to a WiFi network no.  If you want to watch content from an iPhone connected via cell phone on a TV purchase a lightning of Apple to the HDMI adapter and forget about wifi and Apple TV.

  Use AirPlay to stream content from your iPhone, iPad or iPod touch - Apple Support Wireless

• Re: Is it possible to completely recover VistaOS using only the recovery DVDs?

  Hidden WinRE partition has been deleted by mistake, but I still have the original recovery DVD for my A200.
  Is it possible to completely recover VistaOS without the WinRE partition, using only the recovery DVDs?

  Of course.
  The Toshiba Recovery CD is designed to recover the laptop.
  Using the recovery CD you will get factory settings.

  But note; the Toshiba Recovery CD format the whole HARD drive and erases the HARD drive partitions.

  Welcome them

• OfficeJet 4630: 4630 can print grayscale using only the black cartridge?

  I have purchased a printer 4630 and want to use it like I did my old PSC1350 - using only the black cartridge for all printing. I can't find any setting of grey for the 4630 that will allow for this. With the 1350, the grayscale setting would prevent any color ink cartridges is used, an unnecessary expense for printing in black on white paper.

  If there is no setting on the 4630 grey scale, can I be sure that black ink is used only for printing without color?

  Hello @clif9710!
  
  Thanks for posting on the HP Forums!

  Your printer Officejet 4630 should be able to print in gray scale and the options should be in the window of the printer printing preferences.  I was able to locate a document regarding the changing settings in windows 7 print.

  If you do not get the options to print in gray scale you will need to uninstall the HP software, including the old software, restart the computer and re-install the HP Officejet 4630 software again.

  To uninstall the software HP click here: uninstall the HP software

  To download the HP software, click here: driver and software Officejet 4630

  Another good thing about the Officejet 4630 is that it allows to print mode single cartridge.  cartridges for your printer built in print heads which means that it requires no 2 print cartridges.  If you never use the Tricolor cartridge or you are planning on printing in black, you can remove the Tricolor cartridge, put the cap of the cartridge down and close the lid.  The printer should now say "mode single cartridge printing.  Once the printer is closed upwards, you can send your print job and it will print using only the black cartridge one!

  Thanks again for posting on the forums of HP and post back and let me know how it goes!

• The rebel sl1 is adjustable to use only the Center focus point?

  The rebel sl1 is adjustable to use only the Center focus point?

  I've never used one, but I'm sure you can.  Judging by the images I found on a Google search looking for the button in the top right rear, it looks like a rectangle with a sign in there.  Which will allow you to select your focus points.

• By using only the keyboard, how can I create an email using Outlook Express, have the files of "painting" in the body of the email

  original title: only the keyboard

  By using only the keyboard, how can I create an email using Outlook Express, have the files of 'paint' in the body of the email, also registered another Web page?

  Hi r. Gull,.

  You can view using Outlook Express keyboard shortcuts, documented in:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/mail_hotkeys.mspx?mfr=true

  I hope this helps.

• How to insert Unicode characters (such as arrows) using only the keyboard in any app? EnableHexNumpad is always required in Windows 7?

  Windows Help explains how to use the character map to copy or drag special characters in Unicode-aware applications. In Vista, it was possible (but heavy) to insert special characters using the keyboard with the method known as Alt-plus, which has only first need to add EnableHexNumpad to the registry *.

  y at - it an easier way to insert Unicode characters using only the keyboard newly available in Windows 7? Adds EnableHexNumpad to the still of registry required to use the Alt-Plus mode? Other tips to quickly characters insert Unicode in taking applications support Unicode?

  * Register instructions: Add a new string [REG_SZ] named EnableHexNumpad and a value of 1 in HKEY_Current_User/Control Panel/Input Method

  Have you tried UnicodeInput? It is a small program that allows you to enter Windows Unicode characters via the keyboard. Works with practically all the applications that I tested. I use it on Vista, so I can't guarantee it will work also on 7...

  You can find it at http://www.fileformat.info/tool/unicodeinput/unicodeinput.zip .

  Kind regards

• Can I use my Lenovo 3000 N500 without a battery using only the AC adapter?

  Hi just ask if I can use my Lenovo 3000 N500 without the battery using only the AC adapter on? Because I use it almost 24 hours. Thank you...

  Hello leo_joel,

  Yes, you can use it without battery.

  But I would recommend that it is glued to, cause the powermanager will load automatically for the health of the battery.

  Also it s quiet possible, that your won´t system running at full capacity, if the battery is glued on.

• Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

  Hi, I need to download the acrobat PDF after registration and cc payment, I get the new which is not available for mac ist... How can I solve this problem... I use only the mac...

  If you had bought subscription Acrobat Standard / stand-alone product , you need to cancel the subscription / order and re - register / re - order subscription Acrobat Pro DC / stand-alone product.

• Is it possible to create a PDF file using only the pages of an existing PDF?

  Is it possible to create a PDF file using only the pages of an existing PDF?

  Hi drdanger,

  There is a way, and it requires Acrobat. You need Acrobat to extract pages from a PDF. You are welcome to try free for 30 days, Acrobat, if you haven't already. See www.adobe.com/products/acrobat.html for more information.

  If Acrobat, you choose extract in the Pages of the Toolbox pane, then specify which pages you want to extract. These pages are extracted to a new PDF file, which then you name and save it.

  Best,

  Sara

• Use only the IP address of operation EBS

  Dear all,
  
  I have a question, can I use only the IP address of operation EBS?
  Instead of host configuration.
  
  Thanks in adv,
  Jackie

  I have a question, can I use only the IP address of operation EBS?
  Instead of host configuration.

  Non - Oracle EBS uses the hostname in all the files of configuration and IP address only is not hardcoded in the files (except in some tables). So, you must always have a good hostname. Domainname in your hosts file.

  Thank you
  Hussein

• ASA 5510 using only the GB interfaces

  I am looking for should I use a 5510 to activate two interfaces for VPN connections broadband from only a few sites. Our 5505 s (I have dozens) can not manage speeds of more than 100 MB and I have now a few FIOS beyond that--150 to 300mpbs.  I want a 5510 basis who needs to manage a few voice / data sites and just use two interfaces. A basic 5510 allow 2 gigabytes or just ports FE interfaces?  I have to be able to use 2 GB interfaces and no one else. I don't know that the 5510 will probably support the same QOS settings that I use on the 5505 s... I just need more speed interface so that I'm not bottlenecking data (I know I could use several 5505 s and extend the charges but is not how I want to do it for other reasons). Thank you

  Hello

  To my knowledge the ASA5510 supports 2 x 1 Gbps interfaces when you the Security license for the SAA. The basic license counts 100Mbps interfaces.

  Take a look at this document for more information on licensing above

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp190732

  Its a document from the 8.2 version but its still even to 9.x on the license requirement more security get the 2 x 1 Gbps interfaces

  The documentation for ASA5500 series promises an 300Mbps for the ASA5510 model flow, but I guess that's a value of location. In the most recent document, two values of max flow max and Multiprotocol are given.

  Here's a link to the document

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80285492.PDF

  -Jouni

• All Cisco ASA 5510 have the IPS modules

  I am new to the use of Cisco Networking products. I gave me a mission to determine if our company 5510 and 5505 IPS/IDS. In doing my research I discoververed 5505 have no IPS/IDS, but you can buy a card and 5510 have modules IPS/IDS. How can I determine whether my 5510 modue (s) IPS/IDS

  only the new x (but not the 5585) ASAs have software modules. There on the 5505 and 5510 hw modules. But first, you must bring your ASA-access in the order. You can try different browsers, but also make sure that your Java is up to date.

  Sent by Cisco Support technique iPad App

• How do I change computer to use only the black cartridge for print on PSC 950 h

  I'm having a problem with my hp psc 950 printer - when I try to copy something it gives me an error to support code on enter to align cartridges-i do this and it is not always copy - how can I change the printer to use only black ink, the color cartridge is probably more good, I just changed black ink and I really don't need the color in my copies - all solutions would be greatly appreciated

  Thank you

  Hi yalulu,

  I understand that you do not use the black cartridge only. I find the features page and the manual for the PSC 950 but did not find that I was looking for. I would suggest trying to use the printer in mode single cartridge, but I am not sure if the printer supports this feature, that's what I was looking for.

  Try out both cartridges, then put in black only. If this does not work, the only other suggestion I have is to replace the color cartridge.

  You can use the below document to troubleshoot color cartridge, select the document that best describes the issue, or take a look at the same time. You can find these useful.

  • Mistakes print cartridge
  • HP 15, 17, 23, 41, 45 and 78, printing unit is not detecting Due cartridge to white, waxy Substance on cartridge Contacts

  I hope this helps to solve the problem you are experiencing.