ASA with different failover module IPS

Similar Questions

• How is used to monitor two ASA (active/stby) with modules IPS Cisco MARCH?

  Hello

  The two ASA with IPS modules are in Active mode / standby. When I try to add both the two IP (active / standby) in MARCH, the MARCH will complain of duplicate names.

  How set up in MARCH to monitor the ASA with IPS with topology standby active?

  Thank you!

  Hello

  The fundamental problem with this scenario is that you have modules able non-basculement in a tipping chassis - think of the pair of failover ASA as a device and modules IPS as two completely separate devices.

  Then, as we have already mentioned, add only the ASA elementary school. (High school will never be passing traffic in standby mode so it is not really necessary in MARCH) Then, with the first IPS module you can add it as a module of ASA or as a standalone device (MARCH doesn't care). With the second module IPS, the only option is to add it as a separate unit anyway.

  In a failover scenario of the SAA swap IP but SPI considering you'll ever messages from ASA active you will get messages from the intellectual property of these two IPS depending on whether you are in the ASA active at the time.

  Remember that you must manually reproduce all IPS configuration whenever you make a change.

  HTH

  Andrew.

• Cisco ASA with the power of fire vs Cisco IPS Appliance

  Hello

  Question: is there the functional differences between an ASA with the feature of firepower enabled and power of fire IPS appliances 'pure' (e.g. 7000 and 8000 series IPS Modules)?

  Thank you very much!

  Kind regards

  David

  Hello team,

  The same features except hardware bypass and another should trhougputs. Of course the flow rate will be high for hardwrae devices and it also has the ability to bypass equipment. Apart from that URL and all other filtering the same characteristics.

  Rate of good will if this post helps you.

  Concerning
  Jetsy

• New deployment with the ASA and AIP - SSM module

  Hi guys and girls,

  I think to deploy an ASA with IPS module AIP - SSM to my perimeter. I'm going to use / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-margin : 0 ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} Cisco IPS Manager Express (IME) to monitor the IP addresses to monitor the ASA. I have no plans on deploying a device IDS.

  Question: The IME is designed to send notices to the subject of threats? What are some of the configurations in your network? (Just prick with the last question.)

  THX...

  IME is designed only for IPS monitor (whether it be IPS appliance, module AIP - SSM on ASA or other module IPS). IME is not able on the control of ASA.

  EMI can provide advice by email about events which are fires on the IPS, while the IPS itself cannot. EMI may also keep all the events triggered by the IPS, while SPI buffer is small enough, that so if you have huge demonstrations, the buffer gets replaced pretty quickly.

  Here is more information about IME, if you are interested:

  http://www.Cisco.com/en/us/products/ps9610/index.html

• e-Learning courses with different modules

  Hello!

  How can I create an e-Learning course (1 project) with different modules. I use Adobe Captivate 9.

  Thank you!

  Yes, in an LMS.

  I think I found a solution using Adobe Multi mode of SCO.

  Thank you!

• ASA with fire 5555 x Installation/Configuration/full features enablment

  Dear,

  I had a lot of confusion about the ASA with the power of fire all the new features, upgrade, changes made me lost.

  Can someone describes the steps to install the ASA with firepower and upgrade its image & package and the license application. (configuration of the box from scratch).

  What is the best practice for the installation of ASA with firepower in a network?

  TAMÁS is our license what are the features will be important for me, if I want to do a total security. And how about internet proxy I think of ending my TMG Web proxy and use this ASA. I want to use the devices to its full occupancy and all the features that I needed to be activated if necessary.

  How to deal with WLC and the wireless network (which is the best practice for ASA with the firepower and WLC

  Yes maybe that's a lot, but I think many inspiring answers will knock at least with redirection to another topic or some brilliant ideas.

  Kind regards

  Christel

  @mishaal-thabet

  There is a Quick Start Guide to ASA with module power of fire services here:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/SFR/firepo...

  In addition, to configure your policies of Management Center of firepower to make the most effective module, I recommend the Cisco Live presentation by 2015: "BRKSEC-2018 migration ASA IPS and CX to firepower." You don't have to worry about the title, it's a good overview for most use cases.

  It can be found here:

  https://www.ciscolive.com/online/connect/sessionDetail.WW?SESSION_ID=836...

  The WLC interact with the ASA directly but the placement of your controller and you use anchor and host controllers can play in your ASA interface design (i.e. comments in an area controllers demilitarized). Other than that, Wireless subnets are just part of the variable "$HOME_NET" located on the module of firepower.

  I hope this helps.

• Cisco asa 5585 syslog options for ips?

  We have CISCO ASA 5585 with a separate module for the IPS, I want to know what are the options for configuring syslog? Its almost impossible to find; and there are some forums on the internet that says cisco ips store the logs in native format / owner and cannot be exported.

  Please provide details

  Thank you.

  Click on the following link

  https://supportforums.Cisco.com/document/47881/SDEE-and-IPS

• What are different between the IPS and AIP - SSC and AIP - SSM?

  Dear all,

  I'm not clear about the IPS, AIP - SSC and AIP - SSM module which are different?

  Then, when we can use IP addresses?

  When we use the AIP - SSC?

  When we can use AIP - SSM?

  Thus, a different IPS and AIP - SSC and AIP - SSM material or the same material?

  Best regards

  Rechard

  AIP - SSM is an IPS Firewall ASA module.

  IPS is available in different flavors:

  -Device of the IPS 4200 series

  AIP - SSM - module IPS Firewall ASA

  -IDSM2 - IPS module on 6500 series switch

  AIM - IPS - map IPS on router IOS

  Please rate and mark post useful.

• Deployment of a program to clients with different hardware

  Hi all

  I have a general problem with the customers with different hardware. I would appreciate any advice on the subject.

  For example, I have two clients with two different cameras. I wrote a module-oriented camera the camera parent object and children Camera1 and camera2, so that the same logic works for both cameras. I want to deploy the program to clients, but so he could work for two clients, I need to install the drivers of the two cameras at two customers. Is there a way to keep the object oriented and modular code without installing all the drivers of material possible to all customers?

  In the case of two cameras, this isn't a big deal, but my program is more complicated than that and it will interface with dozens of spectrometers, cameras and scanners. I don't want to install each client drivers for all configurations possible. Is there a way to get around this?

  Thank you

  Danielle

  Another alternative would be to use a plugin architecture for your specific items to the customer. Create a Setup program for your application and a camera specific driver for the plugin. Each plugin will be specific to a type of camera-specific and includes the appropriate drivers. Of course this requires your customers to use 2 installers but only the appropriate drivers will be installed. You might be able to pack as a single installer that runs the camera installation after the installation of the application program. Your actual installer would all compatible drivers, but the user will be prompted for which device they use.

• use different JADs to deploy a COD with different properties

  I've never had different JADs to work for the Web site deployment.

  This is the problem, I use getAppProperty MIDLET to get a property.

  I create a file myMidlet.COD with myMidlet.jad which has a property of the HOST.

  I have ten different JADs with different HOST property on a Web site for

  a myMidlet.COD that will be deployed. The midelt deploys nicely on the Blackberry

  but the HOST is the same as that used to build cod. They gave me a code snippet and

  added some debug statements to see what this thing of Module

  public class mybbProperty {}
  CodeModuleGroup [] allGroups;
  CodeModuleGroup myGroup = null;
  String moduleName;
  Boolean flag = true;

  public void mybbProperty() {}
  }

  public void init() {}
  versForm.debugtext += '\n init';

  AllGroups [CodeModuleGroup] is CodeModuleGroupManager.loadAll ();.
  versForm.debugtext += "\ngroup;
  moduleName = ApplicationDescriptor.currentApplicationDescriptor () .getModuleName ();
  versForm.debugtext mode += "\n" + moduleName;   Note ModuleName is correct and is "myMidlet".

  for (int i = 0; i)< allgroups.length;="" i++)="">
  versForm.debugtext += "\n"+allGroups[i].getFriendlyName ();

  If (allGroups [i] .getFriendlyName () .equals ("myMidlet")) {}
  versForm.debugtext += "\n"+allGroups[i].getFriendlyName ();
  versForm.debugtext += "' \n * found"; "
  for (Enumeration e = allGroups [i] .getModules ();)
  e.hasMoreElements () {}
  versForm.debugtext += "\n *"+ e.nextElement (); "
  }
  myGroup = allGroups [i];
  break;
  }
  for (Enumeration e = allGroups [i] .getModules ();)
  e.hasMoreElements () {}
  versForm.debugtext += "\n *"+ e.nextElement (); "
  //            }

  If (allGroups [i] .containsModule (moduleName)) {}
  myGroup = allGroups [i];
  break;
  }
  }
  versForm.debugtext += "\n end";

  }

  public String getAppProperty (String name) {}
  If (flag)
  init();
  flag = false;
  versForm.debugtext += "\n getAppProp"+ name;
  If (MyGroup is nothing)
  Returns a null value.
  Return myGroup.getProperty (name);
  }
  }

  I use the function mybbProperty.getAppProperty ("AppMyHost");

  I noticed that the getFriendlyName() is the name of my Application, so I use it and

  print information. Did I get this

  mybbProperty mybb = new mybbProperty();

  String s = mybb.getAppProperty ("AppMyHOST");

  myMidlet

  * Found

  * myMidlet-3

  * myMidlet-2

  * myMidlet-1

  of course, which returns null. So how do JAD another properties which was used to deploy the

  App for Blackberry. In Nokia its pretty simple use MIDlet getAppProperty() you need a jad and jar for

  deploy it.

  In any case, I don't know which module to get. The JAD I used to deploy the cod was called green.jad

  so I have no idea why myMidlet is important. I wouldn't see green.jad somewhere?

  Anyway, I would appreciate any code that does this correctly.

  Please see this thread on this issue.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=10&query.ID=5227#...

• ASA with firepower and Licensing Service

  Hello

  If I buy an ASA with the power of Fire Service (e.g. 5516-X) should which licenses I buy?

  I understand that I need to order a license for the Service of firepower. E.g. IPS, URLS, and AMP.

  Should I order a license management FireSIGHT, too? The centre of mandatory FireSIGHT management? This license is necessary?

  Concerning

  You will need the license of control (CTRL). It is free and automatically included with any package of power of fire SKU (i.e. ASA5516-FPWR-K9).

  Then you must add the IPS, URLS or AMP (or combination of both) services in term 1, 3 or 5 years.

  FireSIGHT Management Center is not required for entry-level (5506, 5508 or 5516) models. It is optional on those you can use the entry firesight level integrated in ASDM for the model.

  For all other models, it is necessary. If you manage more than a simple ASA (even an HA pair) it is recommended even for the entry level models that you will be so power sync policies through them all.

• ASA 5512 different route by VPN Group (VRF as feature?)

  Hello

  Here's what I'm trying to do.  I have a Nexus 7000 with several of the VRF, simplicity lets call it A VRF, VRF B, VRF C. VRF A simulates a network of management and VRF B and C are customer environments.  VRF B and C VRF will be overlap of intellectual property.  I have a 5512 ASA I use VPN in the environment, it also provides internet access for applications that run in A VRF, (VRF B and C do not require internet access).  What I want to do is to implement three different access VPN on the SAA even, where some users will have VPN 1 group policy and have access to the VRF has, but should not have access to the VRF B or C, same VPN 2 should have access to the VRF B and 3 C VRF VPN.

  My original intent was to configure the ASA with 0/0 to internet Gig, Gig 0/1 A VRF and then Gig 0/2 sub interfaced so 0/2.10 is 10.10.10.1 in VLAN 101 that connects VRF B, 0/2.11 concert would be 10.10.10.1 in 102 VLAN that connects to VRF C.  However, better than I can tell ASA 5512 is not aware of VRF (or is it just a separate license, I would need?) and as such, it is not possible.

  Next similar reflection, but instad configure as 0/2.10 is 10.10.10.1 in VLAN 101 that connects VRF B, 0/2.11 concert would be 10.10.11.1 in 102 VLAN that connects to VRF C. However, I throw it here, issues as the VPN 2 and 3 need access to devices with the same IP address, which is even better I can tell, the ASA is not able to make Policy based routing.

  Is there another way to do this? Is there something that I am on?
  I need to make sure that the 2A VPN users can access services available in the VRF B, they should not have the ability to access (intentionally or not) services on VRF A or C, nor the users VPN 1 or 3.

  I have also a 5585 ASA w / context multi license, I can then creates a context by VRF (that I have), I then interfaces in each correct the VRF-related context.  However, I do not think that I can terminate VPN here, best I can tell when in multi-contexte mode you can not have VPN license.

  Your research led you to conclude correctly that the ASA is neither compatible with VRF nor can it be based on routing strategies. Also, you cannot terminate remote access VPN on an ASA multi-contexte.

  Doing what you ask a single AAS is a bit problematic. If you had a unique internal addresses, the subinterfaces would work fine.

  Because it looks like you have a virtualization infrastructure, have you considered using the low cost ASAv? You could run multiple instances, one per VRF. Everyone knows only the public address space and its respective assocated VRF.

• NATting even address public ip with two periods of internal investigation with different ports

  Hi people,

  Can I use the same public IP for two internal investigation periods different with different ports and I can even user public IP for two periods of different internal investigation with the same ports

  static (inside, outside) tcp 115.248.153.252 192.168.22.19 6303 6303 netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 http 192.168.22.19 http netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 http 192.168.22.20 http netmask 255.255.255.255

  static (inside, outside) 115.248.153.252 tcp https 192.168.22.20 https netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 192.168.22.21 6303 6303 netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 http 192.168.22.22 http netmask 255.255.255.255

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

  No, you cannot use the same public ip address NAT on two internal IP address different using the same port.

  static (inside, outside) tcp 115.248.153.252 192.168.22.19 6303 6303 netmask 255.255.255.255

  static (inside, outside) tcp 115.248.153.252 192.168.22.21 6303 6303 netmask 255.255.255.255

  For the static PAT 2 above for example, when traffic is coming to 115.248.153.252 IDE oucederomsurlesecondport 6303, ASA would not know if NAT it back to 192.168.22.19 or 192.168.22.21, because both use the same port.

• DMVPN with dynamic failover HSRP/IPSEC

  "DMVPN with dynamic failover HSRP/IPSEC."

  Hi all. Is this possible? When you use a direct IPSEC LAN to LAN, you have a card encryption and when you secure the card encryption at the source of the tunnel interface, you configure "' crypto map redundancy with State '."

  The DMVPN does not use encryption card, sound by using an IPSEC profile with protection of tunnel. How you configure stateful with HSRP IPSEC in this situation?

  We're heading for a double cloud dmvpn topology with 2 heads dmvpn geographically separate. I want that every network head to have a redundancy HSRP, which can be done fairly easily. But I also want State IPSEC to be replicated for all security associations IPSEC do not fall in the case of a failover. Is it possible in this scenario and how?

  Thanks a lot as always.

  Hello again ;-)

  There are currently no plan at the moment (that I know) to mix with State redundancy and anythign with protection of tunnel.

  Frankly it is best to create redundancy in DMVPN termination on both turntable and relying on routing protocols - which I am sure you aware of so I won't bore you with details.

  That said, my personal observation is - if you want a failover go to ASA, when you have routers, you have all these wonderful tools like VTI/GRE for IPsec that mix well with routing protocols, and MUCH MUCH more. It is very often to change some timers for routing protocol driven "failover" happen very quickly.

  Marcin

• Is it possible to create a subscription with different options for blog, newsletter, product announcements, training, etc.?

  I would like to create a registration page for my Muse site with different subscription choices, but I don't know if it's possible or, if this is how I build. Any ideas?

  Hello

  This is possible since the end of the hosting platform. If you are using Business Catalyst to host your website, you can use events, campaign of subscriptions module, attach the subscriptions etc. of the area.

  You can create events/announcements on end of BC and then add the module in the Muse page which on post will show the modules on the page.

  Thank you

  Sanjit