Ask the grave service failed when the owner of the object is not system

Similar Questions

• Outlook 2002/Windows error message 7: can't open this item. The object is not valid.

  I recently bought a new computer (eMachine ET1831-05) with Windows 7 installed at the factory.  I installed Outlook 2002.  My old computer died & I have been unable to export my calendar, contacts, etc., so I'll have to enter everything manually in my new.

  When I save a calendar appointment is periodic (for example a birthday) I'm unable to open the appointment.  When I try, I get a message - cannot open this item.  The object is not valid. If I set an appointment that recurs not , everything works fine.

  Any suggestions?

  Thanks in advance!

  Windows Update has nothing to do with your questions.

  Please post here instead: http://social.answers.microsoft.com/Forums/en-US/outlookcontact/threads

  THX

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• will never be an update where you can erase a background object of an image without clear photo behind the object and have the result as if the object was not always on the picture in the first place.

  Will never be an update where you can erase a background object of an image without clear photo behind the object and have the result as if the object was not always on the picture in the first place.

  I guess this feature without doubt not will be part of Lightroom because of the non-destructive nature publishing. Is that programs like Photoshop are for. But I don't speak for Adobe, because I do not work for them, and I did not all understand what are their plans for the future.

• The user profile Service Service failed when connecting: Windows 7, SBS2011

  Hello

  I've been looking for an answer for the last day and hoping someone can point me in the right direction. I've seen many posts on this problem, but none of them seem to be the same as the situation that I am, if I missed an I'm sorry.
  We have just installed 4 PC with W7 (previous W7 machines there have been no problems) when I try to log on to the domain with one account other than admin I get the message
  "The Service user profile Service does not logon, user profile can not be added"
  These are brand new machines and have not been connected with any account other than the administrator, so there is no .bak in the registry file, etc.
  I checked the accounts by logging in on another pc of W7 'ok' and that's fine.
  Thanks in advance for any help / advice
  Ronnie01

  Hello

  Thank you for contacting Microsoft Community.

  First of all, connect the PC to the workgroup, configure the user account, restart it and try to connect back to the field.

  Response if the issue is not resolved.

• asking the viewdefinition statement works, asking the view do not

  Hello

  I have a problem with a query on a view. This application works well for three years with 11.2.0.2.0. After upgrading to V 11.2.0.4.0 n data were returned as well.

  Problem is the Where Clause. I want data normally read for a month, but the WhereClause is shaped, it is also possible to read over several months

  == > 1.  Where t.fiscper > = '2015010' and t.fiscper, '2015011' == > data for October: no data

  == > 2.  Where t.fiscper = '2015010' == > data for October to approx. 90 s

  If I run the SQL query that defines the view, the two WhereClauses offer resultdata, asking the view only version 2 WhereClause Gets the result data.

  Is this a bug?

  Thank you

  Dirk

  Here is the statement defining the view (unfortunately, no repetitive for you), to test demand it inludes the wherclause: AND AG.fiscper > '2015010' AND AG.fiscper = < '2015011'

  -CREATE OR REPLACE VIEW VW_LISA_SGA_PRODUKTION AS

  SELECT Alles.Datenart

  Alles.fiscper

  Alles.fiscper Einsatz_Buper

  Alles.basis_kunde

  lc.schrottart_guss AS schrottart

  Alles.Leg_nr

  Alles.Chargen_Band_ID

  Alles.Ausbringung

  Alles.Einsatz

  Alles.Anz_Stcke_Produktion

  Alles.Anz_Stcke_Einsatz

  Of

  (

  Select 'Chargen SGA_Produktion' Datenart

  AG.fiscper

  EG.fiscper Einsatz_Buper

  AG.basis_kunde

  AG. Leg_nr

  AG. Chargen_Band_ID

  Sum (AG.) Weight) as Ausbringung

  Sum (((EG. Weight / KS. Anz_Barren_Pro_Charge) * AG. (Sterile)) as employment

  Sum (AG.) Sterile) as Anz_Stcke_Produktion

  Sum (AG.) Sterile) as Anz_Stcke_Einsatz

  Of

  (

  -Outputmaterial

  Select t.fiscper

  t.basis_kunde

  t.Leg_nr

  t.Chargen_Band_ID

  Sum (t.menge) as weight

  count (*) Barren

  of vw_Lisa t

  where t.Anlage in (1150, 1250, 1350, 1255)

  and (t.Bewegungsart = 9310 or t.Bewegungsart = 9320) - Ausbringung

  T.fiscper group,

  t.basis_kunde,

  t.Leg_nr,

  t.Chargen_Band_ID

  ) AG,

  (

  -Inputmaterial

  Select t.fiscper

  t.Chargen_Band_ID

  SUM (t.menge) as weight

  count (*) Anzahl

  of vw_Lisa t

  where t.matnr like '% MN011 '.

  and t.Referenz_Beleg_ID like '% P4 '.

  and (t.Bewegungsart = 9330 or t.Bewegungsart = 9340) - Einsätze

  T.fiscper group, t.Chargen_Band_ID

  ) FOR EXAMPLE,.

  (

  -Division

  Select CB.fiscper, CB. Chargen_Band_ID, CB. Anz_Barren_Pro_Charge, KB.basis_kunde, Ko. Anz_Barren_Pro_Kunde

  Of

  (

  Select t.fiscper

  t.Chargen_Band_ID

  , count (*) as Anz_Barren_Pro_Charge

  of vw_Lisa t

  where t.Anlage in (1150, 1250, 1350, 1255)

  and (t.Bewegungsart = 9310 or t.Bewegungsart = 9320) - Ausbringung

  T.fiscper group, t.Chargen_Band_ID

  ) CB, - ChargenBarren

  (

  Select t.fiscper

  t.Chargen_Band_ID

  t.basis_kunde

  , count (*) as Anz_Barren_Pro_Kunde

  of vw_Lisa t

  where t.Anlage in (1150, 1250, 1350, 1255)

  and (t.Bewegungsart = 9310 or t.Bewegungsart = 9320) - Ausbringung

  T.fiscper group

  t.Chargen_Band_ID

  t.basis_kunde

  ) KB - Kundenbarren

  where CB. Chargen_Band_ID = KB. Chargen_Band_ID

  and CB.fiscper = KB.fiscper

  order of CB.fiscper, CB. Chargen_Band_ID, KB.basis_kunde

  ) KS

  where AG. Chargen_Band_ID = KS. Chargen_Band_ID

  and AG.fiscper = KS.fiscper

  and AG.basis_kunde = KS.basis_kunde

  and AG. Chargen_Band_ID = EG. Chargen_Band_ID

  AND AG.fiscper = EG.fiscper

  AND AG.fiscper > = '2015010'

  AND AG.fiscper < '2015011'

  AG.fiscper group

  EG.fiscper

  AG.basis_kunde

  AG. Leg_nr

  AG. Chargen_Band_ID

  ) Alles,.

  LC LISA_Config - contains a line!   avoids a constant in the selection list

  WHERE lc.aktiv = 'J '.

  -> > results in 90 seconds

  Select *.

  of VW_LISA_SGA_PRODUKTION t

  WHERE t.fiscper > = '2015010'

  AND t.fiscper < '2015011'

  -> > don't resultdata

  Everything is OK now.

  What has been done:

  -reconstruction of all the clues, removing all the clues, recreate, no result, responsetimes had bad up to 1500 seconds, but any where clause worked

  (Where t.fiscper > = '2015010' and t.fiscper)<  '2015011' ="" up="" to="" 15500="" seconds,   ="" where="" t.fiscper='2015010'   ="" 2="" seconds="">

  -leave off the table, fill it with the same data-online narrowed to max 500 seconds of response time

  The solution: these two SYSTEM parameters setting to false:

  the '_optimizer_squ_bottomup' value = FALSE;

  the '_optimizer_use_feedback' value = FALSE;

  Where t.fiscper > = '2015010' and t.fiscper <  '2015011'  ="=">data for October: no data is ==> 2.  Where t.fiscper = '2015010'

  Only the definition as session settings does not work!

• Action Script gets ignored when the object is not Visible

  I spent days trying to get help for that so I'll seriously be happy if someone has the answer.
  I have a simple drag and drop of the game user drop off items in a bag and they disappear obtaining or losing points as they.
  
  THE PROBLEM!
  Is not a little funny flash where it does not update the variable "score" (action is not all the script) because the object no longer exists! I tried to do without making objects disappear when dropped on the bag and updates the score normally.
  
  Someone at - there a way around this? I thought I'd put as a button that checks all the visible objects and establishes points in this way but I do not know where to start on this.
  
  Here is the code I put on each object...
  
  on {(press)
  StartDrag("");
  }
  
  on (release) {}
  If (_droptarget == 'Bag') {}
  setProperty (root.rangerssocks, _visible, 0);
  score = score + 1
  }
  on the other
  {
  StopDrag();
  }
  }
  
  
  

  Make sure that the score is a level _root variable and update that way. as you now, score is on the dragged item so it's a question of importance. in frame 1 of the movie root, add

  score = 0; (at the beginning that initializes your score to 0)

  then press the buttons make a
  _root.score += 1;

• Error: The objects do not have merge correctly

  Hi all
  
  I am in 10.1.3.4.2, what I've done is to check the MUD RPD, connected to the database and a newly added column in the database for the salesfact table imported from the RPD.
  
  Presented this column layer MDB by dropping the column toward the salesfact LTS. Then the presentation layer.
  
  Now when I tried to merge my local changes, it gave me an error message saying "Suite of objects has not merge correctly.
  I checked the RPD and saw that, after the merger, the LTS mapping to the physical column disappeared.
  
  What could be the reason for this. I had create a column in the table salesfact MDB layer and not drag - move the column. I want to know what wrong? and what is the solution for this? Is this a bug?
  
  Any help would be appreciated.
  
  Thank you
  Ronny

  Hello

  Please do it this way,

  Offline mode:

  Take the copy of the RPD in your local system, and then try to add the column to Phylayer then slide to MDB layer and drag the presentation layer.

  then try to save the RPD and deploy again and restart the bi services and remove the cache too.

  Note: I have also been facing same problem some time back, I followed above method it works very well for me.

  Hope this helps
  Thank you
  Satya

• The text of the e-mail under the column of the object does not match the selection

  When I get to my Inbox and select an e-mail to open the middle box and the text box below do not match the selection in the object column. This has occurred recently and only on my laptop. My office works fine. The central area and the text matching, this email has been deleted but the text won't just change and go. I'm going on a trip tomorrow, and if I can't fix this, I won't be able to open emails with possible solutions. I'll see answers but can't open them.

  right click on the folder, select Properties, and then on the button repair.

• How to get rid of "Web Page Message" indicating the object does not support this property or method.

  After I log on my computer, I get the following pop up message "Message on the Web Page" - "object does not support this property or method." He continues to pop everytime I try to do something

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Align the object does not support the text properly?

  When I vertically align a line of text and a rectangle, it is not well centered visually. I have "Use Preview Bounds" lit.

  This screenshot, the two blue squares are the same size. Illustrator obviously think it is mathematically focused., but it is not visually. What is Illustrator evaluating in the line of text that made this mistake of centering (there is no descenders)?

  Tips for fast fix visually centered text in a box?

  

  Navarro,

  You can:

  (1) tick Edit > preferences > General > use overview of limits;

  (2) select the Type and the effect > path > describe the object.

  Which will reduce the Bounding Box to the real limits of the letters and keep the editable Type.

  Don't forget to uncheck the Edit > Preferences > General > use limits Preview until you get a reverse problem.

• Captivate 7 slides adio times, but drag the objects are not

  I make a slide with a picture and then I used a Smart Board to annotate this picture to explain in my presentation.  To put these handwritten annotations in, I just copied and pasted on the slide.  Then I did a recording of voice for this slide and aligned all the notes ink to appear at the appropriate time in the recording.  However, when I saw the slide, the recordsets, but annotations are not.  I do not have a game bar, but in the upper corner of the preview, there are controls to navigate through the project.  When I hit the game to the top here when the slide is displayed, then the objects appear when they should.  What could cause this and how can I solve this problem?  Thank you!

  My hunch is correct. You have a form button (first Smartshape from the bottom) that is a break almost at the beginning of the slide, I don't see that it is already inactive after 0, 1 sec. This means that the sound will start playing, since the clip begins to 0secs, and objects in the stack under the form button will show, but then slide the breaks. Why did you choose a suspension to 0.1secs point?

• duplicate the names of the objects, but not?

  Hello, Cp5.5

  I am appointing some of my objects using logical names so I can keep track of everything.  For some objects, I get a mixed message of name "...". is a reserved keyword or is already assigned to another element. "That is not the case now.

  When I originally started this project, I went a bit sideways with how I built and have since taken over my senses.  Originally, I had 6 slides that were essentially duplicates of each other and I condensed the 6 slides in 1.  This particular object is a chart that I'm trying to scen2_3_backoff name (which means "scenario 2, slide 3, back office person ').  Initially, I had an object with the same name but once I changed tactics on the build, this object and slide on that it was are both deleted.

  I cleared the cache but no change.  There is * much * advanced actions on my slides and copy to a new empty project is not an option.  The library shows me using only this image 4 times and I checked that the name is not used in 4 cases.  Checked variables and advanced actions and I have a duplicate here either.

  Any suggestions on how to empty the old names of objects I no longer use?

  Sorry, Andy, but it seems that Captivate has a persistent memory, once you have used a label, you can not use it again. Very annoying and I work on it many times myself. I'm trying to solve and then adding underscore more.

  Lilybiri

• The objects will not matter because of invalid names

  I'm working with a new installation of Oracle, and BI.
  
  I work to fill the SPR using the administration tool and I'm trying to import metadata.
  
  I am able to select the Data Source, and then select the Types of metadata and then various databases and the list of tables in the data source view. When I select a table to import, you receive an error "some objects have not been imported due to invalid names:", then it displays the used tnsname description. There is no error code or number. This happens regardless of which table choose to import.
  
  What 'names' is he hesitated on?
  
  The only quirk I see is the HOST variable in the tnsname which is "R395 - 03.r395.local. Is this the problem or is it something else?

  Hello

  I ran into this issue today (11 G R2 64 bit Windows 2003) and I solved it by following the instructions in the post below to copy the tnsnames.ora file in my {BI home} \network\admin directory:

  Re: Unable to connect to the database of the OBIEE 11g improved SPR

  Note: Before running the error I had used the entire string in my tnsnames file for my name of data source (solution #2) when configuring the connection to the administration of BI tool referenced in the above thread. This allowed me to connect properly to my data source, but then I came across the 'names' invalid error when you try to import tables into my new storage space. Solution #1 in the thread above has solved the problem and I was able to import all of my tables in the repository without error. I suspect the "incorrect names" question has to do with the name of data source ("R395 - 03.r395.local') you used in the BI administration tool.

  For your convenience, the two solutions of the post above are referenced below:

  1. copy your tnsnames.ora {Oracle_BI1} \network\admin directory & {oracle_common} \network\admin directory (only the first is necessary because it is the ORACLE_HOME)

  2. or instead of the source tnsnames.ora entry, use the full expanded tnsnames as shown below

  (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 172.16.66.173)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl)))

  I hope this helps. .

  John

• Aging of 7 error buckets report ARXAGMW REP-1212 body of the object is not locked

  Hello
  
  I'm customizing standard AR aging 7 buckets account report (ARXAGMW).
  I just need to add 2 fields, I added successfully.
  But the report output format is not print correctly.
  I mean if there are 4 columns custname, custno, endcustname and endcustno.
  
  It prints the output as
  
  custName custno endcustname endcustno
  ABC communications Inc. 1234 communicatio abc 1234
  XYZ communications Inc. 5678 pqr communicatio 9657
  
  but I want to print with full name (endcustname) than the way in which it is printing for custname.
  
  Itried to increase the width of the report to 300 and try to run the report, but I get the error message.
  I tried with standard report also by increasing the width but the same error.
  
  Is could someone please tell me when increase us the width of the report what else I should change.
  
  The error is
  REP-1212: 'Body' object is not fully locked in its purpose includes "P_REPORTING_ENTITY_NAME".
  
  
  Thank you
  Malla

  Hello

  "Do not allow" means? You get an error?

  Is that the same model used by this program at the same time? I guess the report type is text.

  If report type is bitmap, size the size of the page in the "exécution Options" field as "PAGESIZE = x" and present the report again.

  Note: 297522.1 - how to investigate printing problems and work to resolve?
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=297522.1

  Kind regards
  Hussein

• the objects were not successfully generated

  Hi all
  when applying patch 8444110 , I got error below and select Yes to continue.
  Please tell us what it takes after apply this hotfix. and where to find the cause of this error.
  
  Thanks in advance.
  Kind regards
  
  
  
  
  Error in the path 8444110 #.
  The following Oracle Forms objects have not generated successfully:
  
  forms of AP / us APXHOLDS.fmx
  forms of AP / us APXINWKB.fmx
  forms of AP / us APXIWALL.fmx
  forms of AP / us APXPAWKB.fmx
  forms of AP / us APXSUMDS.fmx
  forms of AP / us APXPWALL.fmx
  forms of AP / us APXPMTCH.fmx
  forms of AP / us APXSUMPS.fmx
  
  An error occurred during the generation of the Oracle Forms files.
  Continue as if it was successful [No.]: Yes
  
  Connecting to applications... Successfully connected.

  Hello

  I select 'all' before had your answer, and now it would sometimes take to generate all.

  It should be OK to select all files. However, it should be sufficient to select the forms listed above only.

  the worker log files were very useful.

  Fix you the error?

  Make sure you have no invalid items in the database and you have followed all the steps in the patch README file and applied all the patches of pre - req.

  Kind regards
  Hussein