Error: The objects do not have merge correctly

Similar Questions

• Windows Installer service is stopped 3 error "the system does not have the specified path.

  Original title: Windows Installer Service is stopped

  When I try to start the windows service install, I get: Windows could not start the Windows Installer Service on local computer.
  Misconception # 3 "the system does not have the specified path.

  Hello

  Try the methods below and check if the problem persists.

  Method 1:

  I suggest that you follow the steps under the heading Windows Installer issues in the link below to fix the problem.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2:

  You can also try running a Scan SFC (System File Checker):
  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

   

• Backup and restore error "the system does not have the specified path. (0 x 80070003) »

  Original title: Backup and restore SkyDrive errors

  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My Documents. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My music. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My photos. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\WINDOWS\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem in videos C:\WINDOWS\System32\config\systemprofile\SkyDrive\My backup file. Error: (System does not find the specified path. (0 x 80070003))

  The above folders/files have been written not the system image.

  For my mistakes, I uninstalled skydrive and deleted the shortcut created in the bookmarks and folders moved to another location remove skydrive folder and re-run the backup and restore tool.

  Then everything worked well for me.

  Saved once installed skydrive...

• (CSCService) offline files service fails with the error "the system does not have the specified path.

  I have Win7 both 64-bit systems upgraded to Win7 pro in a domain environment (Windows 2003 server).

  Both systems fail to start (CSCService) offline files service with error "error 3: the system cannot find the path specified."
  Best I can tell, it is related to the upgrade process, but so far am unable to identify a work around.
  Someone at - it recommendations?
  Thanks in advance!

  Since it is a new installation, the best way to solve this problem would just reinstall Windows.

  The community forum is more oriented to home users where the Technet forum is aimed more at business users. Due to potential complications with a domain environment, it is why you have been asked to create a new post.

  Here is the link to the Windows 7 IT Pro forum:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• Windows search service couldn't start. The system does not have the specified path. How can I fix it?

  I'm having a problem where IE takes up to five minutes for a web page.   I see the mistake of follow up in the event viewer:

  Log name: System
  Source: Service Control Manager
  Date: 14/08/2012 21:14:10
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Owner-PC

  Description:
  The research service Windows could not start because of the following error:
  The system does not have the specified path.

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event ">"
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      391647
     
     
      System
      Owner-PC
     
   
   
      Windows Search
      %%d Ko
   
  

  When I run the program Microsoft FixIt Center I get 3 error messages that do not reach the difficulty.

  ---------------------------------------------------------------------------------------------------------

  (1) Windows Search is crashing or not fixed failing

  Windows Search crashes or breaks down after that that she has started.  In addition, an event ID 7042, 100 or 1000 is logged in the Windows event log, or the Windows Search Service is not running.

  (2) search Windows does not start and gives an error message no fixed

  Windows Search does not search results show and there is an error at startup.  A 3024 or event ID 1006 is logged in the Windows event log, or the Windows Search Service is not running.

  (3) Windows search shows no results not fixed

  Windows Search shows no results.  In addition, an event ID 7040 is logged in the Windows event log, or the Windows Search service is not running.

  ---------------------------------------------------------------------------------------------------------

  Someone at - it solutions?  Oh, I'm running Vista 32 Home SP2

  Thank you

  Hello

  Did you change to the computer?

  I suggest you to see the links and check.

  The problems with the search

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

• I have a HTML5 form that sends a null (%) if the user does not have a choice. It works fine, but I get an error of W3c on the value of '% '. Is there another way to send a NULL value?

  I have an HTML5 form that allows the user to select 1 of 6 provinces of Costa Rica. If they do not select a Province, I use php code to send a NULL value and the other selections research of the form looking for all Provinces. If they choose a province, we are looking for database records that are found in this province.  Currently I use the value = '%' as the selected value if the user does not have a choice. It works and looks in all provinces, but I get an error of W3c checking on the value = '% '. Y at - it another way to send a NULL value. PS: I have the same problem on the following form which allows you to select the Business category. The page is http://www.yellowpagescr.com

  Here is a copy of the code. The RED line works but gets a W3c issue error of the test page. :

  < form = class "navbar-form Center navigation bar" role = "Search" action = "#searchresults" method = "get" name = "selectterms" id = "selectterms" title = "" >

  < select name = "province" autofocus class = 'copyright' title = "Click to select a Province (optional)" >

  < option value = '%' selected = "selected" > all Provinces < / option >

  < option value = "alajuela" > Alajuela < / option >

  < option value = "cartago" > Cartago < / option >

  < option value = "Guanacaste" selected > Guanacaste < / option >

  < option value = "heredia" > Heredia < / option >

  < option value = "Limon" > Limon < / option >

  < option value = "Puntarenas" > Puntarenas < / option >

  < option value = "San Jose" > San Jose < / option >

  < option value = "Other" > other < / option >

  < / select >

  The correct way.

  " value =" " " selected disabled> - optional Province.

  Nancy O.

• Outlook 2002/Windows error message 7: can't open this item. The object is not valid.

  I recently bought a new computer (eMachine ET1831-05) with Windows 7 installed at the factory.  I installed Outlook 2002.  My old computer died & I have been unable to export my calendar, contacts, etc., so I'll have to enter everything manually in my new.

  When I save a calendar appointment is periodic (for example a birthday) I'm unable to open the appointment.  When I try, I get a message - cannot open this item.  The object is not valid. If I set an appointment that recurs not , everything works fine.

  Any suggestions?

  Thanks in advance!

  Windows Update has nothing to do with your questions.

  Please post here instead: http://social.answers.microsoft.com/Forums/en-US/outlookcontact/threads

  THX

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• I get that for Windows Server 2003 is no longer supported the KBs on these issues do not have a correction action.

  I get that for Windows Server 2003 is no longer supported the KBs on these issues do not have a correction action. My network is disconnected, so the automatic update is not an option but I always receive as a vulnerability on the scans. How can I obtain the latest CRL to mitigate these vulnerabilities.

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• error "the application could not restart correctly 0xc000001d. Click OK to close the Clik.

  Hello!!! I have a problem.  I have windows7 64 bit, download cc 2015 first and I can not open. I see error "the application was not properly restart 0xc000001d.» Click OK to close the Clik"I feel the same with After Effects.  I have installed and uninstalled several times and tried different computers and I feel the same way. Anyone know what it can be? Thank you

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• will never be an update where you can erase a background object of an image without clear photo behind the object and have the result as if the object was not always on the picture in the first place.

  Will never be an update where you can erase a background object of an image without clear photo behind the object and have the result as if the object was not always on the picture in the first place.

  I guess this feature without doubt not will be part of Lightroom because of the non-destructive nature publishing. Is that programs like Photoshop are for. But I don't speak for Adobe, because I do not work for them, and I did not all understand what are their plans for the future.

• I can not connect on DPS App Builder. This error occurs: ERROR this account does not have permission to access the App generator. Learn more about how to fix this.

  I can not connect on DPS App Builder. This error occurs: ERROR this account does not have permission to access the App generator. Learn more about how to fix this.

  Then you need to either:

  (1) sign up for cloud creative then you can build a simple edition approx. attention however: this approach will no longer valid as of May 1, when we withdraw support for a unique creative cloud and unique edition apps are only on devices iPad.

  (2) sign up for a full license of DPS. You can request information on prices using Adobe | Request for consultation.

  Neil

• BIOS update failed: the process does not have this system. The process of the utility is not complete.

  I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.

  Here is my BIOS information.

  "Manage 0 x 0031, DMI type 0, 24 bytes.
  BIOS information
  Seller: LENOVO
  Version: JBET54WW (1.19)
  Release date: 06/11/2015
  Address: 0xE0000

  Runtime size: 128 kB
  ROM size: 16384 KB
  Features:
  PCI is supported
  PNP is supported
  BIOS is extensible
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  ACPI is supported
  Legacy USB is supported
  BIOS boot specification is supported
  Targeted content distribution is supported
  UEFI is supported
  BIOS version: 1.19
  Firmware revision: 1.2 "

  What could you suggest to get the update disc to recognize my system?

  I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.

  I hope this helps someone stuck in a similar situation.

• Cannot read Psychonauts off Steam error - the game could not create the Direct3d device. Please make sure your video drivers are installed properly

  Original title: Running Win7 on Bootcamp. Error: The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I try to play Psychonauts out of steam. I am currently running Windows 7 via Bootcamp on my MacBook Pro 13-inch mid-2010. When I try to run the game, I get the message:

  The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I tried to update DirectX, and I tried to download the Nvidia drivers associated with my laptop model. How can I solve this problem?

  Thanks again for the help.

  I'm not familiar with Apple but I found this:

  http://support.Apple.com/downloads/#NVIDIA

  Except that it is what I have from NVIDIA:

  http://www.nvidia.com/object/notebook_drivers.html

  Previously, only the original beta for mobile graphics drivers were available on the NVIDIA site with manufacturers having full control and ownership of the final version.