ASM different label in v$ asm_disk. Path and v$ asm_disk.NAME

Similar Questions

• Impossible to delete the "cannot find the specified file. Be sure to only specify the path and the correct name?

  For sum reason my computer just started to do the following when I try and delete a file or move a file from one place to the other.

  I am the administrator and the file is there.

  Failed to remove "" cannot find the specified file. Be sure to only specify the path name and filre coeerct.

  Help!

  Perry

  Hi KAD Rebar,.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. Are you having similar problem with all the files you are trying to move or remove it from the computer?
  4. You have security software installed on the computer?

  Method 1

  See the link below and run the Fixit tool available, check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

   

  Method 2

  If the previous step fails, then I suggest that you start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• I am trying to copy pictures to a memory stick and I get: cant create or replace file.can't find the specified file.make you specify the path and the correct name.

  That's what im I get. I had a momory stick which I just plugged and it worked. What is new, what I have to do something special? Thank you very much

  Hello

  Are you able to copy or move files or folders in the hard drive?

  Step 1: Run the fix it tool in the following article and check.

  Diagnose and repair Windows files and folders problems automatically
  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Step 2: If the memory stick is empty then you can try to format and then search for the question.

  Here's how:

  1. right click on the memory stick and select format.
  2. click on the Start button.

• Save as a Script with the path and the preset name

  Hello

  LiveCycle version: 8.2.1.4029.1.523496

  The purpose of the script that I have is to save the livecycle form in a predefined directory and using the values to a text field in the name of the file.

  The script is placed in an output on a field event using javascript as follows:

  this.saveAs ("/ c/Forms/Template/Leave Application"+ Applicants_Name.rawValue".pdf" ");

  The script does not work.

  Can someone please learn about some fixed my script?

  Any help will be most appreciated.

  The only way for a SaveAs is so confident at the level of the Script files.

  Create a javascript (Config.js) file in the Javascripts directory (usually C:\Program Files\Adobe\ Acrobat x.0\Acrobat\Javascripts, where x = the version of Acrobat you have installed).  In the .js file, put something like

  SaveAs Function1

  var mySaveDoc = {app.trustedFunction (function (doc)}

  app.beginPriv ();

  var myPath = "/ c/temp /" + "WhateverNameYouLike" + ".pdf";

  saveAs is the only privileged code that should be placed

  with beginPriv/endPriv

  doc.saveAs ({cPath: myPath,})

  bCopy: true,

  ({bPromptToOverwrite: false});

  app.endPriv ();

  });

  Call the function as event.target.mySaveDoc (event.target); the use of javascript in a mouse, an event for a button.

  I hope this helps.

• Is it possible to define the name of the path and inside the MSI log file

  Is it possible to define the name of the path and inside the MSI log file, so that it should not be set from the command line.  This way just race the msi causes always a logfile in a specific path and the file name?

  Read the following article and see if it helps.  In my view, it is possible to use InstallShield, but I'm not sure.  It's just a little out of my League. http://www.flexerasoftware.com/webdocuments/PDF/msi_writing_to_the_log_file.pdf.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to get the path or the file name of getChild

  Hey everyone, good day!

  Is - anyone here know how to get the path or the file name of an object inserted into the scene?

  Here's the scenario:

  I am developing a flash application, which allows the user to insert background to the scene to help her browse and select using the FileReference in flash. I inserted some image the user successfully choose, but what I'm trying to make, is that if the user clicks on save, the background image it has chosen will be copied to a different folder on the web (file upload). So I need to know the path and the file name of the background image.

  Here is my AS3 code:

  for (var i: uint = 0; i < container.numChildren; i ++) {}
  trace ('\t|\t' + i +'. \t name:' + container.getChildAt (i) .name + "\t type:" + typeof (container.getChildAt (i)) + "\t" + container.getChildAt (i));
  }

  ------------------------------------------------------------------------------------------ -----

  Here is the message trace of the code above:

  |     0 name: instance120 type: object [object Loader]

  ------------------------------------------------------------------------------------------ --------

  Any help here? I thank in advance.

  The Loader class has a property contentLoaderInfo (an instance of the class LoaderInfo) that contains information, that you are probably after, including the url of the content that has been loaded...

  Loader.contentLoaderInfo.url

• LR CC: How can you add labels 'ABC' to multiple slides and how to apply the different transition and pan / zoom to select slides?

  I want to add different labels to most of the slides.  The 'ABC' option adds the same label to all slides with includes date shot and camera settings that I don't want.   I also want to control the slides have pan / zoom.  Seems to be something pretty basic that I'm missing?

  1. by clicking on [ABC] creates the text box.  By clicking on the menu dropdown determines what appears in the box.

  (and you can create multiple text boxes with different information!)

  "Custom text" will appear the same on each slide. The other choice pull metadata each individual slide - "Filename", "Caption", etc.

  The dialog box "Edit...". "you can create a combination of metadata to display in a box.

  In the dialog box "Edit...". "Alternatively, you can create something like this, where the text {Custom} is the same before the {file name}... etc.

  

  

   

  2 pan/Zoom is a feature very poor slide show-it is fixed and will apply to all slides without any possibility of control. Better to leave off...

• I have an object that follows a path and I want another object is placed in a different position, but follow the same exact path?

  I have an object that follows a path and I want another object is placed in a different position, but follow the same exact path? I NEED HELP!

  Easy: Copy and paste images keys, then select all the keyframes in the layer followed and drag them to the left.

  More complex: use expressions - Motionscript.com trails of the creation

• How to specify "device = true/false" what URL's path and querystring

  e.g. http://myserver.com/path/my.php?id=xxxxxx&name=xxxxxxxI have been read many examples on the addition of "device = true/false" or "interface = wifi" based in the current connection service. But all these examples assume that doesn't URL {t have path or from a query string:}

  for example http://myserver.com;device=true

  I need access to a server where the resources are way and I set up via QueryString

  for example http://myserver.com/path/my.php?id=xxxxxx&name=xxxxxxx

  I've been adds "device = true" at the end of the URL and at the end of the hostname

  for example http://myserver.com/path/my.php?id=xxxxxx&name=xxxxxxx;device=true

  for example http://myserver.com;device=true/path/my.php?id=xxxxxx&name=xxxxxxx

  and none of these works. Is it possible to specify when the URL path and use querystring

  I'm working with JDE Plugin 4.5, Ecliipse 3.4 for Curve 8310 and 9000 "BOLD"

  Thank you

  f

  You always add the connection at the end of the full URL string, regardless of what contains the URL.

  The connection string is stripped by the treatment of Blackberry so that your host be confused by it.  The connectin string is used by the BlackBerry to determine what BlackBerry connection path will be used for the connection.

  BTW, this is '; '. deviceside = true/false", not"peripheral", which could explain part of your problem.

  I think this article explains all the possible connection strings:

  What - in different ways to establish an HTTP connection or socket

  Article number: DB-00396

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  For more information, I recommend the section required reading of this thread:

  http://supportforums.BlackBerry.com/T5/Java-development/connecting-your-BlackBerry-http-and-socket-c...

• Display of different labels for a single attribute of VO

  Hi all

  IM using Jdeveloper 11.1.1.7.1.

  Here's the issue I'm facing:

  IM using a LOV in my user interface that creates its own table of query and the results inside a popup as expected. I need to change the labels one of the attributes used here.

  The question I have is the attribute that requires modification is used elsewhere too and he needs a different label in the user interface.

  What is the best way to do it?

  I planned to make a copy of the attribute in the VO, (only changing the value of the label) but it worked only for label search term that the criteria query view uses 'EO. Attribute' instead of the alias. In other words, that it always retrieves the first label attribute that appears in the VO.

  Ive tried to change the bind variable label used in the query - don't see any change.

  Thanks in advance,

  David

  Hello

  label are not specific instance so you use different definitions of VO and replace the label at the level of the VO for the attribute

  Frank

• Need a developer for the script: distribute symbols on a path and rotate

  Hi all

  I need an Illustrator script to distribute a collection of different symbols on a trace. The symbols must be distributed from the beginning at the end of the path and separated by a proportional space between them. In addition, each symbol should be turned pointing to an object "look."

  Please look at the picture as an attachment for more information.

  

  Any help will be appreciated. I know that nobody is here to develop scripts for free so let's talk

  @carlostelemaco

  I am happy.

  But the script "Divide (length)" works for each segment.

  So it is not usable for the purpose which divides all the way having different lengths of segments.

  I wrote a script to process 1 and 2.

  However, it is a little rough implementation for now.

  Please try this.

  http://shspage.com/aijs/af_distributeOnThePath.zip

  @W_J_T, @pixxxel schubser, @CarlosCanto

  Thank you. Let's have fun with the script!

  

• Portal access path and office producer path

  Hi all
  
  I try to get the portal path and the desktop path to the consumer when a portlet is consumed in the backup file of the portlet on the producer. I created the remote portlet in portal administration console, so I do not have a file of backup on the consumer side, and then I guess it is not possible to use the IPC or transfer of custom data to pass this information to the producer.
  
  The portlet must have different behavior depending on which office it is instantiated.
  
  Any help would be appreciated.
  
  Thanks in advance.

  Hello Leandro,

  Additional data seem not to be in this getMarkup application, so the problem must lie somewhere on the consumer. Are you sure that your interceptor turns on the consumer side? You must configure interceptors to loaded by the consumer, for each life cycle.

  Kevin

• Different footer on the first page and last page

  Hello
  I try to display continue on the first page and average pages and Total amount on the last page on a multipage PO. I can view the page of different footer for the first page and last page, but the pages means is not a footer. What to do if possible. There are so many threads here, but not one gives exact measurements.
  
  
  first page header footer
  
  Add a Page break
  2nd foot header
  
  Add the Section break = > Next Page
  <? start@last-page-first:body? > <? end body? >
  last page footer
  
  
  Help, please
  
  Thank you

  Did you miss this?

  http://winrichman.blogspot.com/search/label/different%20page%20header
  http://winrichman.blogspot.com/search/label/element%20in%20header
  http://winrichman.blogspot.com/search/label/diff%20header

• I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and the communication

  I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and communication with our teachers.plz it back... .hope you will do

  Nothing has been deleted. Perhaps if you explain better what it is you are looking for, a person might be able to help. You mean maybe predictive text? All these settings are in settings > general > keyboard.

• Why do I get different results for the same resolution but different boxes of Windows, Windows 7 and XP

  I use an .exe on two different windows boxes, in Windows 7 and XP.  I put both for resolution 1024 x 768.

  Win 7 (old laptop and Dell desktop computer) I have a large application to watch.  On the WIn XP boxes all fonts to big.  It doesn't make sense for me as all PC's have the same resolution.

  Has anyone go through this before?

  System for XP and Vista/Win7 fonts are different.

  See

  http://forums.NI.com/T5/LabVIEW/elements-have-moved-when-opening-VI-with-F3-patch/m-p/1054817

  http://forums.NI.com/T5/LabVIEW/what-can-affect-the-size-of-a-front-panel-object-between/m-p/1058607...

  http://forums.NI.com/T5/LabVIEW/font-size-on-Windows-7-with-LabVIEW-2009/m-p/1055114/highlight/true#...

  and several other similar topics.