Different footer on the first page and last page

Similar Questions

• Different presentation between the first page and following pages within a section

  Hello
  
  I met a requirement as follows:
  
  The report prints some information to order. Each command is a section, including the header and the lines. For a section, there may be several pages (if the number of lines is good enough). It is necessary that, on the first page of each section, it prints all order information in the header of the report and for the next page, it displays only the sequence number in the header of the report.
  
  It seems necessary different presentation between the first page and the following pages. Has anyone required even like that? Any advice will be useful.
  
  Thank you
  Clark

  Do you use a for-each@section to get the different sections?

  In this case use "Different first Page" in the "Page layout".

  Published by: amri on July 13, 2010 15:34

• Header/footer for the first page only

  Hi all

  Is it possible to have headers/footers with option, first page only? The current options are

  • Not first
  • Only in the last
  • Not last
  • Back only
  • In front only

  Is it possible to have 'first only?

  We use Documaker Studio 12.3. Thank you.

  I think that if you want a header, footer on the first page only, which means that you should not use the copy on overflow attribute. Then those who would only be on this first page.

• Display different header in the first page

  I display a table in the header (not a header header but MS word identified as something above <? start: body? > tag) rtf model. This table has 3 rows, I need to display one of these lines in the first page and not in the other pages.

  I have not found any method on the questioning of the page number. So, I used a flag in the following way: (in this case, text with red color denotes an RTF). Here's what my RTF file looks like:

  Header 1	Header 2	Header 3
  init_field	This is the line to be included on all pages
  if_field	This line should not be indicated on the first page.	end_if change_variable

  <? Start: body? >

  other stuff

  <? end body? >

  Where,

  init_field

  <? If: (xdoxslt:get_variable($_XDOCTX,'FLAG')! = 'NONFIRST')? > <? xdoxslt:set_variable($_XDOCTX,'FLAG','FIRST')? > <? end if? >

  if_field

  <? If: (xdoxslt:get_variable($_XDOCTX,'FLAG')) = 'FIRST'? >

  end_if

  <? end if? >

  change_variable

  <? xdoxslt:set_variable($_XDOCTX,'FLAG','NONFIRST')? >

  BUT I still see all the rows in all the pages. It seems that the value of the "FLAG" variable is not preserved between pages. For me, it seems, header is generated once and same header is used in all pages

  Don't know if this is exactly what you are looking for, but why not just place the second line which must be on the first page only after the

  Header 1	Header 2	Header 3
  init_field	This is the line to be included on all pages

  if_field

  This line should not be indicated on the first page.

  end_if change_variable

  other stuff

• Extract the first name and last names of a string

  Hello people,
  I am trying to extract the last name, first name, first name and initial of some names of students for a report. I have some success with the first name and the first names, but have some difficulty to come with the other two. I use Oracle 9i and would like to come with the SQL.
  
  Script to create the table:
  

  create table grad_student_tb
  (student_id varchar2(3) primary key,
   salutation varchar2(4),
   student_name   varchar2(60));

  Script to insert records into the table:
  

  Insert into GRAD_STUDENT_TB (STUDENT_ID,SALUTATION,STUDENT_NAME) values ('001','Mr','Adams,Robert Murphy');
  Insert into GRAD_STUDENT_TB (STUDENT_ID,SALUTATION,STUDENT_NAME) values ('002','Mr','Green,Eric Craig');
  Insert into GRAD_STUDENT_TB (STUDENT_ID,SALUTATION,STUDENT_NAME) values ('003','Miss','Brown,Jennifer William H');
  Insert into GRAD_STUDENT_TB (STUDENT_ID,SALUTATION,STUDENT_NAME) values ('004','Mr','Adams,Michael William H');
  Insert into GRAD_STUDENT_TB (STUDENT_ID,SALUTATION,STUDENT_NAME) values ('005','Miss','White,Snow');

  Here's what I would like on my report:
  

  Student ID   First Middle Name    Last Name   First Name   Initial
  ==================================================================
  001          Robert Murphy        Adams       Robert       M
  002          Eric Craig           Green       Eric         C
  003          Jennifer William H   Brown       Jennifer     W
  004          Michael William H    Adams       Michael      W
  005          Snow                 White       Snow

  Currently my SQL looks like this:
  

  select student_id,
         SUBSTR(student_name, INSTR(student_name,',')+1, LENGTH(student_name)) first_middle_name,
         SUBSTR(student_name,1, INSTR(student_name,',')-1) last_name
  from   grad_student_tb;

  Output:
  

  STUDENT_ID FIRST_MIDDLE_NAME                                            LAST_NAME                                                    
  ---------- ------------------------------------------------------------ ------------------------------------------------------------ 
  001        Robert Murphy                                                Adams                                                        
  002        Eric Craig                                                   Green                                                        
  003        Jennifer William H                                           Brown                                                        

  I need to come up with the first name and initial of the students.
  
  Any help is greatly appreciated!
  
  Thank you
  
  Published by: Roxyrollers on August 18, 2011 12:53

  Assuming that each name is exactly the same format

  SQL> ed
  Wrote file afiedt.buf
  
    1  select student_id,
    2         SUBSTR(student_name,
    3                INSTR(student_name,',')+1,
    4                LENGTH(student_name)-INSTR(student_name,' ')) first_name,
    5         SUBSTR(student_name,
    6                INSTR(student_name,' ')+1) middle_name,
    7         SUBSTR(student_name,
    8                INSTR(student_name,' ')+1,
    9                1) middle_initial,
   10         SUBSTR(student_name,1, INSTR(student_name,',')-1) last_name
   11* from   grad_student_tb
  SQL> /
  
  STU FIRST_NAME      MIDDLE_NAME          MIDDL LAST_NAME
  --- --------------- -------------------- ----- ---------------
  001 Robert          Murphy               M     Adams
  002 Eric            Craig                C     Green
  003 Jennifer        William H            W     Brown
  

  In general, of course, analysis names as it is much more complicated because you have to deal with the family as "la Hoya" names that contain spaces and cannot easily be distinguished from someone with several names.

  Justin

• SEPARATE THE FIRST NAME AND LAST NAME

  How to separate the first and last name? the first name is always first.
  
  With the help of 10g,.
  

  select (Tim Tebow) from dual

  Not an easy task.

  Sir Nicholas Mimsy Porpington
  John Jacob Jingleheimer Schmidt
  Dear

• Footer text on the first Page only

  Hi all
  I need assistance with the addition of the text on the first page of my .rtf in the footer only. I searched the forum and I have not found exactly what I'm trying to implement. There is a wire that has

   <?start@first-page:body?>footer text <?end body?>

  but once this syntax is added, I get an error message. My end user want that the text on the first page of the footer, the model may be one of many pages once presented as a preview. Any information or help is appreciated.

  You can use different first page option in ms word, then you will get a single footer on the first page.

  go to your header or footer double click then you go in the upper msword option another first page check only option so that you can get the footer that you need.

  http://winrichman.blogspot.com/2008/08/different-page-header-and-footer.html

• Create a header ONLY on the first page

  How can I create a document that has only a header on the first page? I tried everything, including Page breaks, which don't work. All I want is to create a fundamental part of the "header" where a logo only appears at the top of the first page and does not appear on any other page but I can't figure out how. I use Microsoft Office 2010 on Windows 7. Help!

  Select different 'First Page' option, and all customizations made to the header/footer on the first page will then apply and not on all subsequent pages.

• LaserJet CP1025: Printing pink spots on the first page of all documents Word and PDF but not Excel etc.

  This printer has had very little use again, last September. This problem started about 2 weeks ago. It affects Word, PDF files and print from Chrome.

  Excel, Publisher and Notepad all print correctly. It affects only the first page of the documentation. Printing multiple one after another - first page only of each doc is assigned along the right edge together about 1 inch wide.

  My office programs are on my school's network. No other users have the same problem and impression on my inkjet at home is fine. My solution is to add a blank page at the beginning of Word documents.

  It seems that it is only this printer is affected, but I do not understand why some programs are affectd but not others.

  Ideas would be welcome.

  Hi @Fortwilliam,

  I see that you are having problems printing applications, the first page has pink spots on the right side of the page. I want to help you.

  It's certainly an issue that you are experiencing. Since it is not done this with all applications. So I don't think it is a hardware problem, but related software.

  Make sure that you are logged on as an administrator and try to print again.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. http://www.hp.com/go/tools > using HP diagnostic tools for printers under Windows HP.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you're still having problems, I uninstall and reinstall the latest version of the printer software, just to rule out a software conflict or the printer driver is damaged. Full Feature software and driver.

  If you appreciate my efforts, please click on the button below the thumbs up.

  If there is anything else I can help you, let me know. Thank you.

• How to customize the pagination so that the first page (which is actually a cover sheet) is ignored and the second page is numbered on page 1?

  I'm working on the creation of a document that will be printed and bound as a book with comb-binding.

  The cover of the book is the first page of my PDF document. Because this first page is the cover, I don't want that it counted as a page for purposes of pagination. Basically, I want to configure so that paging starts with '1', but it starts from the second page of my PDF document.

  I'm using Acrobat 8 Pro. I've been fiddling with the menu of the header/footer page, but so far without success. Any help is greatly appreciated, thank you!

  Well, after having thought about it some, more I realized that there is a simple way around this!

  1 remove the cover page of my document

  2. Add a page numbering

  3 Add again the front page and do not update the footer

  I was driving myself crazy trying to find a way to do it!

• Only show the first page of the chapters and expandable pages

  I just downloaded a book and its showing only the first page of a large number of chapters. When I arrived at the end of the first chapter (if it is still in the right order) he repeated the same page several times. From there, the next 4 chapters were only the first page of each chapter. Is it possible to fix this? What is the cause? I closed iBooks repeatedly, I restarted my phone several times, whenever it is the same.

  Have you tried to delete the book and it redownloading via the bought? If it's that the same are all recent comments mentioning the same problem? If it's a recent purchase, you could contact iTunes Support: http://reportaproblem.apple.com

• Windows fax and scan only saves the first page

  When I use the windows fax and scan pages to analyze. You can get an overview of all the multiple pages scanned, but what emailing or save you then cannot see the first page.

  Hello

  If you're using a scanner with a charger of documents and Windows Fax and Scan, you can scan multiple pages into a single file of scanning to the TIFF (.tif) file format. For more information, see:

  
  Scan a document or photo with Windows Fax and Scan
  http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan 

  If you use Windows Fax and Scan and a flat bed scanner, you can scan multiple images to separate files probably. Not all scanners flat have this ability, so you may need to contact the manufacturer of the scanner to get a driver so that your scanner flat may offer this option.

  Reference:

  Scanning: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/scanning-frequently-asked-questions 

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Denial of world App because of icon and app stuck on the first page

  I recently submitted my application for approval, but I got the same problems of feedback twice now:

  -After the installation of your application on BlackBerry Z10, Q10, Z30, there is the icon of the application is / mark questions. If you use our Eclipse plugin, please check your BlackBerry_App_Descriptor.xml file and make sure that you correctly specify your custom application icon
  -When typing your app, application pasted on the first page. Please make sure that your app work correctly.

  I have included a custom icon specified in the configuration file with the .

  I have also run the application on my device dev-alpha with no problems. The screenshot that I received the first time in support of BB showed no bar to future Action to exit the splash screen; However, when I run the app on my dev-alpha device I am able to see the action bar and navigate to my three monitors.

  Someone else has experience this problem?

  There is no such thing as all my code to inspect at github

  Thanks in advance for the help.

  Hello

  What version of OS are you running on your device?

  The action bar is probably due to an outdated version of bbUI.js be used. Currently using:
  https://github.com/InnovateorDieOnline/Bote/BLOB/master/index.html#L11

  Which is: bbUI VERSION: 0.9.6.15

  So that the most recent:
  https://github.com/BlackBerry/bbUI.js/BLOB/master/pkg/BB10/BBUI-min.js

  Is actually: bbUI BB10 version: 0.9.6.889

  There are a number of BBUI updates that were needed to support future versions of 10.1 and 10.2. Probably an update to your library BBUI is necessary.

  Regarding the app icon, I don't know exactly. If you are ready to send me your record of BAR ([email protected]), I can verify that the config.xml file / BAR descriptor are configured correctly.

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.

• New Windows 7 pro machine always prints the first page in a direction, but all other pages are printed in a different orientation

  We bought a new PC for one of our employees that is running Windows 7 Pro 64 bit. We have several printers throughout our office area. There are three printers that this person will print to the two Ricoh printstations and a Brother Laser printer. Any printer that employee uses printers still print the first page, a focus on the next page and all other pages in the other direction. The first page is always printed in the opposite direction of whatever orientation has been selected.

  If it has a four page document and select landscape as the orientation, the first page prints in portrait orientation while the other three pages will be printed in landscape. She can go back and print the document again and all four pages will be printed in the right direction. This happens no matter which printer she uses, as well as any program (Word 2010, Excel, Adobe, web pages, etc...). Any suggestions?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.