Aspire switch 10 fails to turn on

Similar Questions

• Acer Aspire switch 11, how to turn off the click left tap?

  Well, starting the touchpad already has the feature where you click on it, it records the left click of the mouse each time you do. There is absolutely no need "tap to the left of the mouse" option, it is completely redundant and very annoying.

  Try this:http://windows.microsoft.com/en-us/windows-8/touchpad

• Aspire Switch 10 does not light: 10 Windows Installer failure problem or coincidence?

  Greetings! I have an Aspire Switch 10 originally running Windows 8.1 32-bit with Bing, which is a little less than a year. I had not used for several months, so in the course of a few days had been the installation updates which have been missed, while it was not in use. Yesterday, the update of Windows 10 presented, I ran the utility, which determines whether the system can be updated and then decides to go, despite some reservations about it based on horror stories that others have shared with me. But I thought that the relatively 'new' OS on it mitigate the risk to some extent. Maybe not so much. I'm not a professional computer, but have done enough hardware and DIY software over the past 20 years that I thought I might give this a go with limited risk, but in hindsight should have been more careful because the operating system is rather an essential component of the computer.

  Download was fine, and the installation started and was about 19% when I had to leave unexpectedly for a few hours, so I don't know what happened during this time, or when the installation has stagnated. I went back to a completely black screen and a unit that does not turn on no matter what I try. I spent several hours last night looking and try different ideas on how to at least get it lights up, while I might try some of the other patches. No luck at all.

  I thought I had created a recovery file, but I can't find a flash drive with one, if my memory fails me on creating a file of recovery, or lost it. Anyway, since I can't get the unit running, I'm not sure he would do any good if I had one in hand or bought an Acer.

  The camera has a little less than 3 weeks left on the hub of the manufacturer and is subsequently under an extended warranty from Costco. However, the extended warranty does not cover problems caused by software or applications, so if it is a problem that was probably caused by the installation of Windows 10, I'm stuck with a brick or will continue to try to fix it myself or find a computer local store who might be able to help without the cost more than what I paid for it originally.

  All the advice, assistance, are welcome. Thanks in advance!

  Here's an update on my problem. This morning, I had a live chat with a support of Acer person. After a last-ditch effort to revive my machine from me, the conclusion was what I thought: the BONES disappeared. Fortunately, because the model is one that supports Acer for Windows 10 and my machine is still under warranty, the repair (original reinstallation of the operating system) will be covered by the warranty. The downside is that there is no local service center, so it needs to be shipped to Texas.

  Needless to say I'm going to stick with the original OS as soon as I get it back.

• Brightness of the display on battery walk brighter. Acer Aspire switch Alpha 12 SA5-271 - Q 55, 6

  Acer Aspire switch Alpha 12 SA5-271 - Q 55, 6

  I am running the latest version of windows 10.  I noticed that when the Tablet is a stack when I opened a window, like a file Explorer, the screen will brighten up about 3 to 4 more brilliant after the opening stages of the window.  Turning off automatic mitigation does not affect this.  He disobeys on battery.  Any ideas?

  Thank you

  Catherine

  IIRC the last version of Windows gradually reduces the brightness of the screen when it is on battery. Opening a window to bring it to normal, how it will start again dimming.

• Acer Aspire switch 10 - Boot USB / Windows 8.1 installation of USB

  Hello
  I recently bought Switch 10. As it has only 32 GB SSD cut into 24 GB of windows and 8 GB partition for recovery, I tried to merge these partition to get rid of the recovery and have only a single partition SSD. Longbstory short, I failed and got a blue screen, then a restart and now I have this:
  http://i.imgur.com/NmAkhgO.jpg

  I have Windows 8.1 the official site of Microsoft, I have orginal CDkey (not OEM Acer's). The version I downloaded is a 32/64-bit Installer (I think, but it can be 32-bit only)
  I tried to configure the BIOS by myself, but it always puts me the blue screen of windows (with error 0000225).
  I provided the BIOS with the default settings screens: http://imgur.com/a/jtyN2

  I prepared the USB stick to a .iso image with a program called Rufus, GPT partitioning system.

  Then I changed the BIOS settings to allow non-secure startup and boot from USB HDD first, and when you start, I hit F12. But I still get that: http://imgur.com/yE48diG

  -What would I do? Be able to start Windows 8.1 installator, clear all partitions on SSD and make sure that you have a 32GB with windows.
  -What I need? Help, because I can not boot from USB and run Windows 8.1 installator.

  I found the solution, everything works fine.

  To do this, you must keep two things in mind:

  1. you may not use Microsoft official .iso for the USB program - it does create a bootable USB stick for UEFI bios, the official downloader for Windows have the ability to create USB bootable .iso downloaded, but it is not able to do.

  You must create bootable ISO using software of Rufus (type simpy rufus in google or LINK), then all you have to do is to make sure that you have selected GPT partition scheme for your bootable usb key and the FAT32 file system.

  2. the most improtant thing which is our Acer Aspire Switch 10 supports ONLY 32-bit Windows, just all the instalators Windows that contains the version 64 bits are wrong. Conclusion is simple, you need only 32 bits instalator, the 32-bit/64-bit custom works (like only instalation of 64-bit that is obvious)

  Hope this has helped.

• Acer Aspire switch 10 - stuck at splash screen (Acer logo)

  Hello. My Aspire Switch won't start. It always hangs at the initial home screen with the Acer logo and the circle of rotation. Circle continues to run forever (I have a switch to turn it off). It worked fine for about a month, but one day I had this problem. I tried to start it without dock and SD card, but it did not help. Does anyone know what I can try to do?

  My version is SW5-012-11 K 1 NT. L72ER.004 (64 GB, model FHD), bios 1.06.

  I just my Tablet repair service. They replaced the whole motherboard.

  The topic can be closed.

• How to reset to the default values for Acer Aspire Switch 10

  I bought the Acer Aspire Switch 10 SW5-012-16GW removable 2 in 1 windows mobile touchscreen (64 GB) 8.1 the 30/11/201 of the Amazon.

  After two days, I couldn't not on the internet due to some errors of proxy server. I also noticed there were many installed junkies.

  So, I would have a complete cleaning to reset to the factory settings. Much would appreciate if someone can show me the steps. Amazon box did not come with any CD system.

  Thank you very much!

  The hard drive on startup recovery
  1. turn on your computer, and then press Alt> + F10> during startup. A
  will appear asking you to choose the configuration of the keyboard.
  2. several options are now presented. Click on Troubleshooting.
  3. click on refresh your PC or reset your PC.

  Note
  "Refresh your PC" allows you to restore your computer to the default factory
  condition with intact files. 'Reset your PC' removes completely all your files
  and resets your computer to factory settings

  Or you can use the Acer erecovery from windows software, just press the logo keys windows + s, then type acer erecovery, start it and choose your option.

  I suggest you do the USB recovery media, this will help you a lot in the worst cases.

• Acer aspire switch 10F / I don't see hard drive

  Hi, today I got a new acer aspire switch 10F. I live in Poland, but I bought the acer in the United Kingdom.

  So I turn on the acer and I see acer have 10 windows. I check 'This PC' and I do not see a HARD 500 G 0.o disk, only 32GB. I thought I have a version without the HARD drive, but have all versions. The keyboard/dock is heavy, so I think that hdd is in the keyboard, but windows can't see HDD.

  This is screen printing:

  

  In disk management.

  Maybe I don't have some drivers?

  Please help than kyou

  Hello

  Yes, yours is not equipped with a HARD drive. Last year, I have evaluated a similar model (only 32 GB mem) and have not found the dock Ko was very heavy. The message, in my view, that it comes to USB ports (e.g. plugged USB flash drive).

• Aspire Switch 10 (SW5-011-18R3) Bluetooth pairs and disconnects

  I have an Aspire Switch 10 (SW5-011-18R3) with Bluetooth connectivity question.

  Already updated BIOS 1.06 and all windows updates of fact. Pairs of Bluetooth with other units and then disconnects after 15 seconds.

  I have exchanged the Tablet for another brand new and same problem again.

  Someone at - it one Aspire Switch 10 (SW5-011-18R3) with a similar problem?

  I'm just checking if this is a widespread problem with the Aspire Switch 10 (SW5-011-18R3)

  or extreme bad luck with 2 units I got.

  Think about it, someone at - he sucks a 10(SW5-011-18R3) switch with a fonctioning fully Bluetooth?

  Your last post made me think about the problem in a different way and I did some more poking in the system.

  My goal was simple, being able to transfer files from one phone or another Tablet at the Aspire, and it was the problem because the connection was not the transfer did not follow.

  I found the way to do it and also discovered that there may be some kind of problem of firmware or software with the device, but it can still be done.

  Solution:

  -Bluetooth must be turned on

  -Pair of devices (matching initiated from Aspire), connection will not remain, but it does not matter

  -Go to the office

  -Right click on icon (taskbar) Bluetooth and get the Ribbon options

  --Select receive a file in the menu (new Panel opens)

  -And send your file from your other device on the Aspire

  Now, normally when you send a file to the Aspire, the Aspire should normally give you an alert that another device tries to connect or try to transfer a file, but it doesn't (even with the bluetooth settings correctly configured for notifications).

  If essantially, unless you call system by opening this Panel "to receive the file", the simple system refuses all incoming traffic and does not give you an alert to authorize the transfer. It starts the transfer, but disconnects because there is no authorisation. Open the file 'receive' is used the permission and can proceed with the transfer.

  Thank you for your contributions and especially for the last one which made me think the problem from a different angle.

• Acer aspire switch 10 no boot device

  Hello, I am working on an Acer Aspire Switch 10 2 in 1 (there so no usb port and no cd drive) when I turn it on it flashes Acer logo for a second and then jump to "No boot device" with an image of a hard drive and a magnifying glass. This was not the case before. I could get for the recovery and trying, but it did not work. Now it seems that when I go in the settings of UEFI, boot order options have nothing other than IPV4 and peripheral USB for possible boot options.

  On information in the BIOS, you can find any reference to the members of the SSD?

  If this isn't the case, it is probably a hardware failure.

• L750 satellite fails to turn on

  I had one laptop L750 but it fails to turn on.

  Yesterday Toshiba task bar invites & ask me to the bios update, I tried twice and does not have both.
  Then I liquidated to the bottom of the laptop.

  And now, I tried to turn it on the first time after the update has failed.
  But he remains silent. Only the a/c LED and battery light is on.

  I tried to plug and unplug the adapter, but it still does not.

  Please give some advice, thanks a lot...

  Hello

  When you start your laptop, press F2 and enter the BIOS settings. If you can do this BIOS setting to default and try to start it again.
  When the same thing happen again try it please use F8 at startup. You can enter advanced startup options?

  Also, check if you have access to the recovery image and if installation of HARD drive recovery is possible?
  Check please - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  You will find a step by step explanation how to do this.

• Questions about the Acer Aspire Switch 10 guarantee

  Hello

  I am very interested and very probably going to go ahead with a purchase of the Acer Aspire Switch 10 but I have a few questions. As the device is not currently available in Australia my plan is either:

  (A) choose one of these devices to the top when I visited the United States in two weeks

  Or

  (B) order now (of the United States) and delivered it here, so it comes at the time wherever I'm back from my trip.

  So my main question is, as I have seen many different people having the same problem here with no apparent difficulty, if I made the purchase would I covered by warranty? I think that one would see me covered by the guarantee of international travelers, but it is not very clear. The second option would be local warranty (United States), is that correct? So if I had a problem I have to send it to the United States (at my expense)? Or should it be mentioned here in Australia? And finally, if a problem arises here, local service center (located in Sydney) acer would be able to solve the problem or find a replacement model, even if I have to pay a fee?

  Thanks for the help, I am completely impressed with the device for what it is, I don't want to be stuck with a dud and know I am not covered by the warranty after I come back home (Australia) or when it arrives.

  A traveler warranty Acer is designed so that if you buy a product, then travel outside your country up to 90 days, you can get service while you travel. Because you live in Australia and be buying abroad and return home, that you would classify not as a traveller in good faith. You can read all of the terms and conditions in http://www.acer.com/worldwide/support/itw.htm.

  The warranty for a product purchased in the United States would need to be repaired in the United States. Unfortunately, you would be responsible for the shipping of the product to the United States for repair, and we can only ship to an address in the United States, so you have to send it to someone in the States who may transmit the packet.

  Regarding if the deposit of Australian repair can repair the product, it would be up to their discression regarding if an ITW applies and if they are able to get the parts of the system. It is recommended that any warranty service needed on a purchased product, to be in the country of the initial sale.

• Aspire Switch 10 keyboard problem

  Hello. I have problems with my brand new Acer Aspire Switch 10.

  I just unboxed it - it sounds great - but unfortunately there is a problem with the keyboard. When I press on to ' or 'g', I get ' gs, similarly ' t ' and '4', 'y' and 'w', ' 6 "and 3" and more annoyingly "v" and "right arrow".» I'm typing this message on an external keyboard!, which works very well.

  Is there something I can do to try to resolve the problem, or I am looking at a return

  Replacement keyboard works very well.

• How can I type the characters printed in green on the keyboard of Acer aspire switch 10?

  My (Northern) keyboard on my Acer Aspire switch 10 has some characters printed in green. This includes the backslash character I need desperately. However, I can't find any information in the manual or elsewhere about access (type) these characters. Help, please!

  I tried now. With the help of the button Fn-type only the characters printed in blue. The backslash is printed in green, as is the Danish æ and 0-slash (o). Explaining the problem to my wife, she wanted to give it a go. And to my surprise it resolved in less than a minute. I had missed that the backslash WAS ALSO printed in white on the same key as + and? so, to be able to type it, all I have to do is pressed the Alt - Gr key pressing this key. Stupid of me to do not see it the first time around.

  Getting back to the question initial on the characters printed in green, I came to the conclusion that it is "conversion" of the keyboard in a Danish provision of individual countries by specifying this keyboard layout in Windows settings. Similarly, there are a few characters printed in red. I assume these are Norwegians.

  This type of complexity, that's what you get when manufacturers want to reduce country-variants for as little as possible, I guess.

  So all is well here

  For reference, I enclose a picture of my keyboard

  

• Acer aspire switch v10 wifi problem.

  Hello

  I'm sorry if this has been asked before but I looked and that you can not see this problem.

  My friend got an Acer Aspire switch V10 from the EA Store with mobile internet, but want to connect Wifi too when shes at home.

  The problem is that there is no option for Wifi everywhere where I can see. My laptop Windows 10 in the Notifications Panel and the subnet in the settings. But these are not? How to connect to a Wifi network?

  Thanks for any help you can give and, hopefully, im missing not only something

  Welly

  It is possible that it is, for some reason, got the wireless off. There is a press of button (Fn - F3 on this laptop, may vary on the switch) which enables / disables wifi on and outside. In addition, you can toggle the wifi device in network and sharing Center, go to edit the card settings. If it does not then it is possible that the driver is corrupted or missing, open the Device Manager and look for whatever it is reported as a problem. Finally, it is possible, that there is a hardware problem in which case it will not show anywhere. This requires a trip to the repair depot.