Aspire VN7 - 591G - what wireless driver?

Title says all TBH. I have the Aspire VN7 - 591G, with a qualcomm-atheros qca61x4 but I can not know what model it is.

The two drivers seem to work, the NFA344 can be better / more stable.

Acer care has no State which are card, that it is and pilots of the site;

Driver Atheros Wireless LAN (Liteon NFA222) 10.0.0.318 49.2 MB 2015-09-08
Driver Atheros Wireless LAN (NFA222 HAI) 10.0.0.318 49.2 MB 2015/09/07
Driver Atheros Wireless LAN (NFA344 HAI) 68.4 MB 12.0.0.102 2015/09/07
Driver Atheros Wireless LAN (NFA222) 10.0.0.318 49.2 MB 2015/07/21
Driver Atheros Wireless LAN (NFA344) 12.0.0.102 68.4 MB 2015/07/21

Ideas of how to know without cracking the case open?

Hello

Maybe with theportable version HWINFO (no install).

Tags: Acer Laptops

Similar Questions

  • Problems with Acer Aspire VN7 - 591G. Not enough memory to update to windows 10

    Hi, I have trouble upgrading to Windows 10. End of 2015 Aspire VN7 591G.

    My C drive seems to be complete, but I only have Windows 8.1 saved in this folder. Try to upgrade to Windows 10 hours (connection terrible broadband) before finally quitting and the message "not enough space on the destination drive. I am totally confused and frustrated - C drive has only 8.33 GB free of 44.7 GB. I have just installed Windows 8.1, I deleted all the bloatware and other programs/applications irrational yet it seems fair to decrease on a daily basis. I already had to do a clean install, as drive C became complete.

    All the solutions in terms of 'dummy' simple? Thank you

    First of all, do not forget to create recovery media, then you can always go back to stock windows OS installation.

    http://Acer--UK.custhelp.com/app/answers/detail/A_ID/26286/~/create-a-Acer-factory-default-backup-in...

    Since you have a slow connection, I suggest that allows you to create a bootable media using download from microsoft also, so you don't need to download windows 10 update each time.

    read here:

    http://community.Acer.com/T5/knowledge-base/Windows-10-installation-recovery-media-creation-and-use/...

    a 8 GB USB flash drive is necessary

    I suggest you do a cleaning of the HARD drive too, probably, you have files of windows upgrade spare failed 10:

    Windows logo key
    type
    Disk Cleanup
    Click Disk Cleanup
    Click on clean up system files
    Let scanner
    then check the files you want to delete, it is safe to do so
    in the end, press ok and let it wipe the HARD drive for you

    After disk cleanup, check to see if the 10 windows temporary folders are still there:

    http://www.thewindowsclub.com/delete-Windows-BT-WS-folders-Windows-10

  • Acer Aspire VN7 - 591G trackpad not recognized

    Hello

    I am the owner of a laptop Acer Aspire VN7 - 591G Black Edition.  Today, at the start, my trackpad is more responded to my touch or clicks.  First of all, I pressed Fn + F7 to see if I had just accidentally turned off, but it wasn't the case.  I plugged an external mouse on the USB port to my laptop to navigate and once in the Device Manager, found that my trackpad is not listed under mice and other pointing devices.

    In addition, under mouse properties, my trackpad does not appear.  Mouse compatible HID is the external mouse I currently use.

    I'm not sure how to solve this problem.  If anyone has any ideas that could help, it would be greatly appreciated

    In addition, I guess I should mention that I'm running Windows 10 months and not had any problems until today.

  • Adding an SSD for Acer Aspire VN7 - 591G - 70RT (need help)

    Hello

    I have an addition an Acer Aspire VN7-591 G-70RT with a slow 5400 RPM 1 TB WD Blue that creates a bottleneck in my laptop.

    I checked on Crucial to see if there are compatible SSD for my laptop which recommended:

    MX200 crucial m2 Type 2280 (Single Sided) 250 GB internal SSD

    I was wondering, do anyone know if this information is correct? I was having mixed information online, 250 GB wouldn't cut my storage needs, if I could only get a 2.5 SSD "so my intention is to have an SSD 250 installed and my 1 TB HARD drive.

    Also, if the SSD was not the main drive would I still see the benefits of installing games who him? As in would be the existing WD blue always be causing a bottleneck?

    Any help with this would be appreciated!

    I have the device works now, I installed the MX200 Crucial m2 250G without any problem. Here's how.

    WEAR AN ANTI STATIC BAND:

    Step 1) remove all the screws on the underside of the laptop

    Step 2) use spudger or credit GENTLY lift a gap between the keyboard and the base, then use the credit card to slide slowly into the space to jump open clips, NOT FORCE.

    Step 3) (OPTIONAL) remove the keyboard connectors by moving clip and gently remove the cable from the Jack. However the HARD drive slipped in for me without necessary to detach.

    Step 4) unplug original WD HDD blue reversing the clip and disconnect the cable

    Step 5) close laptop together and boot with Windows 10 USB install

    Step 6) install windows on new SSD (for me windows automatically activated via the BIOS/UEFI) if it doesn't happen for you, simply re-attatch the original HARD disk.

    Step 7) if the activation is successful, again set HARD drive and original format. I have kept all the original ACER RECOVERY and Partitions (Healthy) in case I need to restore factory default, but formatted primary partition.

  • Aspire VN7 - 591G which of the following is my wifi card?

    I have an Acer VN7 - 591 G-77FH. I wonder which of the following is my card of fi wi so the update, because I can not connect pc via wi fi

    In addition, what are the Mini Port WAN?

    The good driver wireless Acer VN7 - 591 G-77FH is:

    (NFA344) wireless LAN driver

  • Aspire VN7 - 591G Wifi AP mode on windows 10 x 64

    I've updated the driver to the latest version (12.0.0.102), but still hosted network is not supported on Windows x 64 10. Any suggestions?

    Driver: Qualcomm Atheros QCA61x4 Wireless Network adapt
    Seller: Qualcomm, Atheros Communications Inc.
    Provider: Qualcomm, Atheros Communications Inc.
    Date: 24/06/2015
    Version: 12.0.0.102
    INF file: C:\WINDOWS\INF\oem9.inf
    Files: total 4
    C:\WINDOWS\system32\DRIVERS\Qcamain10x64.sys
    C:\WINDOWS\system32\DRIVERS\qca61x4_1_1_2.bin
    C:\WINDOWS\system32\DRIVERS\eeprom_ar6320_2p1_NFA344i.bin
    C:\WINDOWS\system32\DRIVERS\vwifibus.sys
    Type: Wi - Fi Native Driver
    Radio types supported: 802. 11B 802. 11 a 802.11 g, 802.11ac 802.11n
    FIPS 140-2 mode supported: Yes
    802.11W protection of management framework supported: Yes
    Hosted network supported: No.
    Authentication and cipher supported in infrastructure mode:
    Open any
    Open WEP 40 bit
    Open WEP 104 bits
    WEP open
    WPA-Enterprise TKIP
    WPA-Personal TKIP
    WPA2-Enterprise TKIP
    TKIP-WPA2-Personal
    Defined provider TKIP
    WPA2-Enterprise provider defined
    Defined provider defined provider
    CCMP WPA-Enterprise
    CCMP WPA-Personal
    WPA2-Enterprise CCMP
    Defined provider CCMP
    WPA2-Enterprise provider defined
    Defined provider defined provider
    Defined provider CCMP
    Defined provider CCMP
    WPA2-Personal CCMP
    Defined provider defined provider
    Supported wireless display: Yes (graphics driver: Yes, the pilot Wi - Fi: Yes)

    Thanks to Asakazeis now resolved. Simply install the version 11.0.0.373 for Windows 8.1x64 and everything works smoothly.

  • Aspire VN7 - 591G Black Edition overheating!

    Hi guys, I've had this laptop for a month now and I have been concerned with it for some reason and is that when games with put 100% on battery and plugged power management (Turbo Boost on) temperatures to the laptop trigger for 95 to 98 degrees after a few minutes of gameplay (Star Wars Battlefront, Heroes of The Storm and so on). So my concern is that finally the processor or other parts can jump cause these temperatures are enough * beep * high in my opinion... I looked on the net and people say they have the same problem... My question is are these normal temperatures and are the parties strong enough to protect the laptop, blow up "so to speak... Can some1 please give me a solution to reduce the heat without cool pad or rotating turbo off boost cause when I turn it off games become rly lag... My specs are:

    NVIDIA GeForce GTX960m

    8 GB Ram

    Intel I5 - 4210:

    8.1 Windows 64-bit

    Hello

    Yes, the temperatures are normal for the operation. Very demanding applications can increase the temperature at these levels. You don't have to worry because the processor T junction is about 100 degrees. So usually at 95 degrees, the processor will start to Butterfly (ditto for the GPU, but at lower temperature), which means that it will reduce its speed to not reach the junction temperature T. In the games the limitation, you can see it by the fact that the frame rate drops to a lower value.

    There are a few suggestions for temperature reduction. Try a cooling pad, change the thermal paste, use software to adjust the fan speed according to the use.

    As I said several times, I change thermal paste, it has improved a lot, but not as you think. I mean the processor is able to run at higher speeds before that begins to throttle, but is still around 95 degrees when I'm doing intensive tasks or stress tests.

  • Aspire VN7 - 591G win 10 clean install - coolboost and lack of dustdefender

    Hi guys could you help me please?

    I did clean Windows 10 installation on my laptop and I can not see in my Acer Quick Access - CoolBoost and DustDefender functions. I've updated the Acer one quick access and Acer power management, but still nothing. :-(

    Any ideas please? I really want to CoolBoost cool my CPU all in game. Thank you.

    Here's someone else with a different model to which it is missing... and I don't think they set up own.

    IM wondering if the latest BIOS has changed anything to ensure the best speed of the fan (cooling)?  It gets hot?

    http://community.Acer.com/T5/V-and-VN-series/CoolBoost-thermal-missing-from-Acer-quick-access/m-p/37...

  • Wireless driver for my Aspire 4810TG

    Hi, I reset my computer to factory settings by Acer Recovery Manager, which worked perfectly after the removal of some distributions additional linux and grub, etc.. But I was unfortunately a bit too fast at cleaning my new installation and I was able to remove the wireless driver which I CAN'T find. Then, someone knows where I can get the right driver for my Aspire 4810TG (No. wireless P4LJ0), whether a link where I can download the driver THAT I should choose to 'Browse my computer for drivers' or it-option? I tried the obvious options, like driver Acer support downloads and other driver pages and chose the most obvious "go, but none are just...." If it is possible I would not reset my computer again... It would be great if anyone out there has had the answer! Thank you, Daniel

    Is your wifi adapter:

    Intel Centrino Advanced-N 6205

    Try this (100% trusted site):

    http://www.station-drivers.com/index.php/downloads/func-startdown/934/

    You can try to install the drivers manually, the navigation in this folder:

    intel_wireless_17.12.0.5 \Win7Plus\Win64\Drivers\Win7

  • When will it all drivers for laptop Aspire VN7 - 791G (G-74RK VN7 - 791)?

    I want to know when it will be all THE drivers available for my laptop Aspire VN7 - 791-G, they being developed to treat?

    mozilla343 wrote:

    I need driver LAN, touchpad, bluetooth, wireless and are hope which will apply acer also earn 10, I mean fast access, launch and power management. And why the BIOS has hidden settings? I really hate this. Please download as soon as possible.

    In most cases, 8/8.1 drivers are fully functional in 10. Install and check.

  • Hi, install SSD on Acer Aspire VN7 - 591 G-70RT and setting for the primary boot device?

    Hello

    I have an Acer Aspire VN7 - 591 G-70RT that came with a Western Digital blue 5400 RPM HARD drive which is limitation of my performance of laptops. I contacted Acer recently to ask for upgrades that might be made and they confirmed that I could build an SSD 256 GB and up to 16 GB of ram.

    I bought an SSD now and install, but I wanted to ask how I could continue on the definition of the SSD as my main drive.

    At this point, I guess I could install the SSD, then select it as primary boot device in the BIOS by pressing F2, and then install windows 10 via my USB. If this should be good to reboot or the existence of windows on my current HARD drive causes a conflict?

    Thank you

    I have the device works now and here's what I did.

    WEAR AN ANTI STATIC BAND:

    Step 1) remove all the screws on the underside of the laptop

    Step 2) use spudger or credit GENTLY lift a gap between the keyboard and the base, then use the credit card to slide slowly into the space to jump open clips, NOT FORCE.

    Step 3) (OPTIONAL) remove the keyboard connectors by moving clip and gently remove the cable from the Jack. However the HARD drive slipped in for me without necessary to detach.

    Step 4) unplug original WD HDD blue reversing the clip and disconnect the cable

    Step 5) close laptop together and boot with Windows 10 USB install

    Step 6) install windows on new SSD (for me windows automatically activated via the BIOS/UEFI) if it doesn't happen for you, simply re-attatch the original HARD disk.

    Step 7) if the activation is successful, again set HARD drive and original format. I have kept all the original ACER RECOVERY and Partitions (Healthy) in case I need to restore factory default, but formatted primary partition.

  • BSOD no error checking for does not aspire VN7 - 792G

    Hello world

    I got my aspire VN7 - 792G (v17 nitro Black edition) since November 2015 and since last week, I was doing some odd BSOD bugcheck (0x000001d3) without errors. Using BlueScreenView I noticed that the error came from QCAMainx64.

    This happened last week and so I did a system restore and then updated my drivers wireless at 11.0.0.471. I've also updated my Nvidia drivers to the latest version in the case who had problems.

    I did a sfc scannow which gave rise to no error, I did a check of windows memory which gave rise to no problem and a disk check which resulted without any problem.

    The strangest thing was that the BSOD is produced especially when my laptop was being called in the upper left corner. But after a week of no BSOD they now returned at random moments.

    The first BSOD happened on cdrom.sys and netio.sys (also 0x000001d3) and then 2 other BSOD's happened (one while doing a system restore point) and the other so I just browsing youtube, which happened on the QCAMainx64 again.

    I left the Netherlands in Dubai and I left my receipt to the Netherlands, so I only have a scan of my warranty paper and ordering the product emails to prove that the laptop is mine. I was not able to repair yet because I need my laptop for work as well.

    I'll add my minidump files to this post. If anyone knows anything I might have missed or which is better I can do to avoid BSOD.

    I am running Windows 8.1. It seems that, on the acer site, that I can not download more updates to driver for windows 8.1 because they offer only win 10. And I'd rather not updated for windows 10 in all.

    Thank you for your time.

    http://www.filedropper.com/desktop_27

    Try to update the driver with this version:

    http://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=FileInfo&ID=2011&lang...

    Click Download, double-click the auto unpacking package and look for a configuration or install the file.

    Web site is 100% reliable.

    have an update on nvidia drivers too:

    http://www.GeForce.com/drivers/results/99508

  • WiFi problem with Aspire VN7 - 791.

    Hello

    I have a problem with my Acer Aspire VN7-791.

    I reinstalled Windows 8.1 and I have some problems with the wireless card.

    I first tried to install the drivers I found on the Web site, and none of them could do work (the system still did not recognize the wifi card)

    Then I tried to install the driver from the official site and with this one:

    http://www.killernetworking.com/support/driver-downloads/standard-drivers

    The system has detected the wifi card and now I can see the SSID of the network around me.

    But when I tried to connect to my network, I couln t, I have one "can" do not connect to the network. Windows.

    I have a dual boot Linux and it works fine, I see the networks around me and I can connect to mine.

    My wireless card is a "Qualcomm Atheros QCA61x4 Wireless Network Adapter".

    However, I can still use the functionality of network hosted the wifi card, if this information could help.

    Also, for some reason, I can't use the Acer care center, he said that my PC is not supported.

    Thanks in advance for your help and sorry for my bad English.

    Go to control panel, programs and features and uninstall the wifi. Make sure that there is no other wifi of the installed drivers. Restart and install the latest driver for wifi Acer.

    As a last resort, book your personal date and do a cover of the plant.

  • Aspire 6930 update hardware wireless card?

    Please indicate on what wireless card I should buy an upgrade? Reason and detail as follows:

    I'm happy with my 6930 but my ISP has indicated that my WiFi (Intel(r) wifi Link 5100 AGN) card is not suitable to receive the wireless download 100mbs (although the specification of 5100 seems to advise that it is capable of "n" standard).

    I am a resident using the Virgin Media Internet service provider, which has just improved my download speed broadband 60mbs to 100mbs to the United Kingdom. My PC is an Acer Aspire 6930 Lap Top - running Windows 8.1 64 - bit adapter card Intel(r) wifi Link 5100 AGN.

    On ethernet I get the full 100mbs, but the wireless receive only 60mbs (exactly the same as before the upgrade)!

    Virgin support staff have reviewed my system and concluded that the wireless card is the problem remotely. Have you contacted support Intel who advise I have contact Acer support for details of what card I need?

    So my question is "what card to buy?

    Hi Jack

    A result I think - all kinds!

    Your link provided was an older driver than I was using already, but it prompted me to search the site of Intel once again and see if there was something else.

    I found the following:

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3062&DwnldID=23492&ProductFamily=wire...

    This seems to work much better and speedtest.net confirms that I read now about 75mbs - not quite the 100mbs on ethernet, but a significant improvement.

    I'll stick with that for now.

    Please accept my grateful thanks for your time, expertise and patience on this one - you're a star.

    Kind regards

    David

  • Pavilion Dv4000: Windows 7 wireless driver help!

    Guys, I really need your figureing helps it to...

    My friends machine needed some TLC... so I formatted and reinstalled the Windows 7 operating system.

    I went to the HP support for pilots page and there are only drivers XP Win.

    In "Device Manager", it shows the following drivers requiring.

    Mass storage controller
    Multimedia Audio Controller
    Network controller
    Video controller

    The problem...

    I simply can't the wireless to work for love nor money!

    I downloaded and installed (a) different drivers for the wireless device. When they have been installed successfully, I'm supposed to be able to see a network to connect to diffuse all SSID wireless & Pick-up. I could not make it work! It worked once then stopped working again after it restarts as if this isn't retatining the driver for the wireless card. its really weird!

    Performed troubleshooting.

    • Downloaded the drivers for the wireless card and run them in compatibility mode (Win XP SP3) & installed.
    • Rebooted the machine. and the Wi - fi icon beside the clock has a red x through it, as it that the device is not enabled.
    • verified that the wifi was enabled. (what it was)
    • check that the pilot has been allowed within 'Device Manager' (it's still) drivers Displaying the "Intel 2200BG.
    • but still the Wifi symbol in the taskbar shows Red Cross or disabled marker on it.
    • Tried to install other Wifi drivers for the device of Intel 2200BG from other sites, including Intel. Restart, charges the driver installation (after removing the previous version) still nothing! same thing!
    • Tried to use the Intel utility to find the update and install the Wireless driver. (again same result).

    It seems that Windows 7 accepts the driver Intel Pro / Wireless 2200BG, but somehow somewhere to turn off the device in Windows 7.  How does it can disable a device but see that the device is installed and works unless you are a doubtful driver?

    Somehow, I managed to make it work for a while and connected to my wireless router. not a problem, then once the machine has been rebooted im at square one again!

    thinking that might be something wrong with the registry systems or material etc... I then

    • Formatted the hard drive again for the 2nd time.
    • Re-installed the card WiFi on the laptop, checked the connections were seated correctly
    • re-installed the operating system Windows 7 again.
    • before applying any other drivers on the system I tried to reinstall the driver from the HP website (just to remove it may be a conflict driver with another thing. yet once always the same thing.

      I spent hours on it now... and im at the point where I'm ready to run my friends laptop out the window and get extremely violent with her! I never met this before all the time, I played with computers. so I need someone to point out where im going wrong here. It's seriously making me crazy!

      I have attached a picture of this post, I hope that's clear enough for you to see that bar Wi - Fi symbol and the pilot agreed to "Device Manager".

      If anyone knows what drivers I can use for the rest of the devices, Audio, video (especially video and Wifi) and mass storage device would be much appreciated. There is still plenty of life in the old courbine of a machine and will make my boyfriend a good turn.
    • Someone please enlighten us on that until I lose the will to live!
    • Thanks in advance.

      Street

    You are the very welcome.

    I see that the multimedia audio controller device has been installed and that means you should have sound there.

    I already give you the driver for the mass storage controller (this is the card reader).

    Yes this is useful.

    The graphics in this model is not quite able to market Vista or W7.  Quite capable, I mean he can't run Windows Aero.

    There is that one driver in the world that has any chance of working for the graphics, it's this one... After installing this driver, you will be able to change the screen resolution and graphics acceleration is enabled.

    You must install it manually.

    Download and run this driver.  You will probably get an error not supported operating system.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=447304 & swItemId = ob_47264_1 & swEnvOid = 2096

    Conclusion of any windows error.

    Go to Device Manager and click on the video controller requiring driver.

    Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

    This file will be located in C:\SWSetup\sp34749.

    Make sure that the include subfolders is selected, and the driver should install.

    Reboot and the graphics should work just fine, but not Aero.

Maybe you are looking for

  • Battery pro iPad factory

    I just bought the new ipad 9.7 pro and it comes with 10% plant load. Is this normal? I know that most devices equipped with 50-80%. Should I be worried? Maybe an oil change battery so that it was stored?

  • Satellite L350D - overheated, motherboard fade

    HelloI have a laptop Toshiba Satellite L350D, I got a year ago when it overheated and stopped. It would not start, and I sent it to a technician of will be checked. According to the technician he had overheated and the motherboard is melted. It was o

  • Cannot pick up devices via Bluetooth

    MY iPad does not pick up the devices via Bluetooth

  • Requires a Type not loadable

    Unfortunately, I can't share the code, but here's my situation. I have 2 dll VB.NET. The first is DLL refers to the second. Then in TestStand 2010 SP1, I have a step in the Action that calls a method in the first DLL that returns a type of the second

  • I get the following error in Outlook Express when using SSL

    "You are connected to the server using a security certificate that could not be verified." The certificate CN name does not match the passed value. You want to continue using this server? » Y/N If I say 'Yes', everything works fine, I can receive and