Assign the page file (.vmem) VM a specific file and folder name.

Similar Questions

• File and folder name format

  What is the correct file and the name format for photos and folders files. Use "-", "_", "." when separating the names? And how many characters are allowed in Photoshop or Lightroom?

  What is the correct file and the name format for photos and folders files

  Any name in your operating system should work.

  Use '-', '_', '. '.

  There is no problem to use the dash or underscore. I have never tried creating a file name with a period in it (except for the file extension), so I don't know.

  And how many characters are allowed in Photoshop or Lightroom?

  Yet once again, this is controlled by your operating system. What is legal in your operating system should work.

  Which brings a question side... most people don't much worry about the details of the file and the file naming... There are ways to organize, using keywords and other metadata in Lightroom, where these questions about the file and the file naming disappear... Add as many keywords as you had huge and similar legends long with all kinds of special characters, this isn't a problem. Using the folder and file names as organization tool has some limitations.

• size of the page file and the hibernation Windows 7

  I've recently updated the RAM in my computer to 16 GB.  I noticed that my pagefile.sys is now 15.9 GB and file hiberfil.sys is 12.0 GB.  I do not hibernate.  My computer has two physical hard drives (essentially a disk OS/program and a data reader).   What is the amount appropriate for the page on the operating system drive file size and is at - there a way to remove or reduce the size of the hiberfil.sys file?  I plan on migration of my OS drive to an SSD in the near future and wish to reduce the footprint of these two files for migration.

  Thanks for any advice.

  Check your power option settings

  and http://www.howtogeek.com/howto/15140/what-is-hiberfil.sys-and-how-do-i-delete-it/

  Allow victory to manage the size of page file

  What size ssd you plan on buying?

• Two hard drives - what to set the page file to?

  I have two hard drives, Windows is installed on C:, what should I set my page of the settings file for better performance? Hard drive space is not a problem, I have a 250 GB and a 1 TB drive, both are less than half full. I have 3.25 GB of RAM DDR2.

  I heard move the swap file on a second hard drive is beneficial, because the OS files and the page file could be consulted at the same time. Defining a very large page file or file page on both drives will hurt performance? What is a variable size compared to a matter of constant size?

  It shouldn't be noticeable performance difference if the swap file is bigger than "necessary".

  If your system can it take into account, it is considered generally to be a performance advantage to put the file on a different physical disk than the operating system is installed, provided the other player does not see many IO already.

  By using a constant size / fixed can eliminate fragmentation of the file page that can occur if it is sized dynamically.

  If you anticipate relying heavily on the swap file, maybe reconsider and add more RAM to the system, if possible, or upgrade to a 64-bit computer and the operating system that is able to handle more RAM.

• Where is the page files?

  I am running Vista Home premium. I want to reduce the size of my partition of my boot c: drive. I want to find my page files and move them to another drive and then reduce the size of the partition.

  Where are they?

  How can I see them?

  How can I move them?

  Hello

  The page file (Pagefile.sys) is a hidden file on your hard drive that Windows Vista uses as if it were a memory (RAM). The file exchange and physical memory is the virtual memory. By default, Windows stores the paging file on the boot partition (the partition that contains the operating system and its support files). The default paging file size is equal to 1.5 times the total RAM. However, this default configuration is perhaps not optimal in all cases. This article describes how to configure the paging file for optimization of the system and recovery.

  You can follow the steps in the link given by bob.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-7-set-to-no-page-file-and-i-cannot-change/992de6a8-bec2-4E74-b6d9-d418a7f5cda0?TM=1367819685901

  Alternatively, you can follow the steps to move the paging files.

  1. Log the computer as an administrator.
  2. Click Startand then click Control Panel.
  3. Click performance and Maintenanceand then click System.
  4. Click on the Advanced tab, and then, under performance, click settings.
  5. Click the Advanced tab, and then under virtual memory, click change.
  6. In the drive [Volume label] list, click one drive other than the one on which Windows is installed (Windows is usually installed on the drive C). Under Total paging of the size of file for all drives, note the value that is displayed next to recommended.
  7. Click custom size, and type the value recommended in the initial size (MB) box.
  8. Type the maximum size that you want to allow for paging in the size maximum (MB) , and then click set.
  9. In the drive [Volume label] box, click the drive on which Windows is installed (usually drive C), and then use one of the following steps:
     • If you don't want a swap to disk file, click No paging file, and then click set. A message similar to the following message is displayed:

  If the pagefile on volume C: has an initial size of less than 126 megabytes, then the system may not be able to create a debugging information file if a STOP error occurs.
  Continue anyway?

  Click Yes.

  1. • If you want to keep the minimum size of the file on the drive, click custom size, and type a value that is equal or greater than the amount of RAM in the computer in the initial size (MB) box. Type the same value in the box size maximum (MB) , and then click set.
  2. The following message appears:

  The changes you did ask you to restart your computer before they can take effect.

  Click OK, click OK, click OK, and then click Yes when you are prompted to restart the computer.

  Hope it helps you to solve the problem.

• Try to calculate the size of the PAGE file

  This is an academic exercise. I am trying to determine why my PAGE file size is what it is. Currently, he is registered to 28,000,331 bytes. (He's alone). Here are the facts:

  3 dense dimensions, stored members are 17 * 20 * 5, for a total of 1,700 * 8 = 13 600 bytes.

  The actual maximum blocks are 19 800. The maximum reported are 24 750.

  I have disabled compression for ease of calculation.

  There is only 1 block no missing.

  I use SER60 as my guide in the section estimate disk and the memory required. However, when I use the planned calculation:

  Number of blocks * (size of data block expanded + 72 bytes)

  I don't get anywhere near the number of bytes listed for the PAG file. I realize that I am not to mention the rest of the database files and do not know if this calculation is only for the PAG files or all files. I am not very interested in the size of the entire database, just the file PAG. So my questions are:

  1. is the calculation provided for all files or just the file PAG?

  2. If the answer to 1 is Yes, is there a separate calculation, that I can use to determine the size of the PAGE file only?

  Take a look at NUMBLOCKSTOEXTEND in the technical reference on Essbase.  We had a long conversation that addressed this issue on Network54 recently: http://www.network54.com/Forum/58296/thread/1374608752/11-1-2-2+Fragmentation

  Short answer is that Essbase allocates file space .pag in 2048-block pieces, which is the default value of NUMBLOCKSTOEXTEND 11.1.2.2.  Calculate how many blocks (including header block 72 bytes) integrate 28,000,331 bytes and you will see that this is almost exactly 2048.

  With compression on it more difficult (for me, at least) to understand how Essbase arrives with the size of the average disk blocks to use as the size on the disk with compression on is not constant.

• Unlock the file and folder attribute does not work in LV 2012

  Hello

  I use unlock attribute to unlock a file (defined in the specification to build installer-> settings of the Source file-> file and folder attributes). This Setup program installs the application in Program Files (Win7 x 64) and when the application is started it creates a file in the folder "unlocked". I've used it several times with LV 2011, but it does not work with LV 2012 (the folder is not unlocked)? An example for LV 2012 (without installation) is fixed, the same example works if I build with LV 2011.

  I received an email from support TODAY:

  "As we have it, I analyzed the behavior you described ' unlock folders and files not working not. '"
  The error could be reproduced. It was also successfully detected and documented.
  The development team is working on this and the next update may have already solved this problem. »

  I hope that this will soon be :-).

• I have a lot of activity of page file and page faults with 2.5 GB of RAM memory

  Hello

  I tried to find the reason for the slow performance on my pc and the limiting factor seems to be the activity of page file and errors of memory page. It is Win XP sp 3 with 2.5 GB of RAM and a processor 2.8 GHz (core). The task manager has never really shown a problem, memory use was rarely higher than 30%, around 10% page file use (I have the initial value, 3.5 GB 4 GB max) and CPU rarely hits 100%, but even when the task manager has revealed no particular problem the system shuts down sometimes for several seconds on starting the program or file to open. To follow the reason down I have installed a more detailed tracking software, which shows up to 1200 files page per second being transferred to or from the virtual memory and up to 8000 page errors per second during these breaks. This could be the cause, and if I can change all the settings to make more efficient memory management?

  Thank you

  My copy/paste standard when someone thinks PFs is / are part of their performance problem (but it's probably not...):

  I'm guessing that you see in the Task Manager and you have chosen to display the column of Page faults?

  If this is the case, given that the column of Page faults is not normally displayed if you activated, perhaps you are looking for some performance issue.

  A Page fault does not mean that there is a problem.

  A Page fault means generally that the application needs some data that are not in physical memory (RAM) at the time.  When the application needs some data that is not in the local memory and must recover from the paging file on the hard drive which is a way, you will see an error Page generated.

  Sounds kind of bad because it has the word 'Fault' in there, but it is really normal.  If you call your task manager after a reboot (do not use any browser), all applications are likely to have at least some page faults, even if you just restarted and "did not" do anything yet.

  Some applications may generate a few hundred or a few thousand Page Faults on a restart and then does not change.  The only thing in the task manager that will have zero Page faults is the system idle process, but this is a special case.

  Knowing what is a Page fault, you can understand that if your system does not have enough RAM for your operations, XP will need to move out to the pagefile often to get things he needs things there can be not in RAM when he needs.  Whenever she does this, you will have a Page fault.  The less RAM you have, more your applications will have hit the swap file to get their data, but you should be able to control some of this and you may even not notice "" the faults of Page at all--they happen all the time.

  So, one might think that if you turned off your pagefile and ran without a paging file, you would see zero Page faults in the Task Manager.  That sounds good, but this isn't the way things work.  XP works best when you have a system managed pagefile size (generally) the value if you probably won't work without a pagefile.

  You would always see Page errors in the Task Manager is because there are hard and soft Page faults Page faults, and you would see soft Page faults.

  A hard Page fault would be access to the disk paging file.  A soft Page fault would be just a shuffle or the reorganization of the things that are already in memory.  The Task Manager just them put everything in the column Page Fault and you can't make a difference.

  Given that the Task Manager offers two types of page faults in a single column you will need else with more granularity (such as performance monitor), tools that allow to separate Page faults in soft Page faults and performance monitoring of hard Page faults.    If you turn off your paging file and use Perfmon to split the Page faults on different types and follow them separately and have no pagefile, you see zero hard Page faults, but still see soft Page faults as a separate counter.

  I ran XP for a l-o-n-g time with only 256 MB of RAM and was quite satisfied with her for several years once I dialed things.

  Most your system and applications run, Page faults accumulate so that application until the application ends and restarted, then the Page counters error starts to the new and will keep goes upward, upward, toward the top and up - it does not mean necessarily you have a problem and PFs are not likely to be the cause of your performance problems.

  I do not think that you will see top-down but you can start them by restarting the application.

• How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  How can I convert .ai files in jpeg format?  It seems that I am only able to get the .ai files and my Adobe Photo Elements program does not recognize the file.

  I want to continue my membership with Adobe, however, not if it requires some additional software purchase.

  For .ai files, you will need to use or know someone who uses Illustrator or another program compatible .ai to convert. If you access a page of image details before license you can see the file type.

• Hey, so I just bought first 13 items and I downloaded the installation file and spoke to install, but it is stuck at 2%

  I just bought first 13 items and I downloaded the installation file and spoke to install, but it is stuck at 2% on installation.

  It then comes up with the error screen but I click on details, and he said: there is no Web page, I have restarted my computer, removed other Adobe products, I don't know what to do d:

  I tried lot D:

  He's going to tell me what IS the error that I have for it either... so I can check to fix D: said that there is no Web page...

  alexas

  Thanks for the reply.

  You just solved your problem. If not all, basically everything. You need 64-bit installation files for your 64-bit computer.

  You need two installation files - for extracting .exe and .7z the program itself. These two files have 64 in the name of the file if each is to be used in a 64-bit system.

  If you have purchased serial number...

  a. you can go after the series of 64-bit installation files where you are

  or

  b. downloading 64-bit from the following location and insert your serial number purchased by them during the installation.

  http://prodesigntools.com/Photoshop-elements-13-direct-download-links-premiere.html

  Important... carefully perform the ' Note: very important "on this web site in order to avoid the access denied Message. Don't forget: you are using the trip to Adobe mentioned must be authenticated, you use the web site for the 1 (.exe) file links and file 2 (7z).

  or

  Try download from c.

  http://www.Adobe.com/downloads/other-downloads.html

  Please let us know if your observation was the key to the solution.

  Thank you.

  RTA

• problem in the zip file and tutorial. can someone remove or correct...

  Hi experts jdev,.
  
  use jdev11.1.1.5.0.
  
  When I am new on this webservice. I followed this tutorial
  http://docs.Oracle.com/CD/E18941_01/tutorials/jdtut_11r2_14/jdtut_11r2_14.html
  
  wsdl URL link when using that wsdl.
  
  throws an error.
  What is the reason, said john. OK at the second post of the thread.
  Consume a Web Service from a Web Page
  
  so if I change the wsdl means somethings should be changed in steps tutorial.
  
  If any newbie crossing this tutorials feels very difficult to work. so I can change the wsdl url link and these steps.
  
  and another thing, as I installed 11.1.2.0 and download zip file in this tutorial and I run up the same error.
  
  so. problem in the zip file and tutorial. any person may file or correct...
  
  I think it's the right place to say this. Otherwise, re - direct me.

  It's yours if you want to close. I ping the folks at Oracle.

• I tried to delete the downloaded files and ended up losing all my personal files. I can do something to get back them

  I tried to delete the downloaded files and ended up losing all my personal files. Can I do something to get back them?  Any ideas, please?

  I hope that you can restore from a Time Machine backup > > use Time Machine to back up or restore your Mac - Apple Support

• Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

  Updating FF 24/25, my browser hang, I uninstall the browser and tried to reinstall, but extract the Setup file and blocks until pls give a solution

  I solved the problem, installed the installer from mode Windows safe.

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.