How to check my site from https to the Web site with you? The warning triangle should disappear.

Similar Questions

• DV9000 how to check what type of memory, it will be compatible with?

  My laptop is a HP Pavilion dv9000.  That's what he said right next to the microphone.  I don't know how to check what kind of RAM would be compatible with it; If I should get a DDR or DDR2 RAM.

  Two ways to do it. Locate the serial number on bottom_Check for the number of full model as described in section 1 below.

  http://tinyurl.com/2krh3u

• How to check that my application is in the context of the background thread

  I'm listening to push into the background thread, but I want to receive the push only when the application is in the background, and then how to check that the app is in the background

  check if it is listed in http://www.blackberry.com/developers/docs/7.1.0api/net/rim/device/api/system/ApplicationManager.html...

• How to check if a node exists in the XML file?

  I was asked to program a method to import data from xml files in our Coldfusion 8 Web site, I am new to the use of XML.

  My method worked however I encountered the following error:

  Element NETWORKORDER. SECONDARYADDRESS. CONTACTNAME is undefined in MYDOC.

  Investigation on the node in the XML file was not present.

  Is there a method I can use to resolve this error by checking if a node exists in the xml file, which works with my current code below?

  <!--> reading XML file
  < cffile action = "read" file = "D:\website\XML\#FileName#" variable = "myxml" >
  < cfset mydoc = XmlParse (myxml) >

  <!--> to extract data from the XML of NDS file
  < cfset aPrimaryContactName =(#mydoc.NetworkOrder.PrimaryAddress.ContactName#) >
  < cfset aPrimaryContactNumber =(#mydoc.NetworkOrder.PrimaryAddress.ContactNumber#) >
  < cfset aPrimaryContactNumber = tostring(#mydoc.NetworkOrder.PrimaryAddress.ContactNumber#) >
  < cfset aPrimaryContactAddressLine1 =(#mydoc.NetworkOrder.PrimaryAddress.line1#) >
  < cfset aPrimaryContactAddressLine2 =(#mydoc.NetworkOrder.PrimaryAddress.line2#) >
  < cfset aPrimaryContactAddressLine3 =(#mydoc.NetworkOrder.PrimaryAddress.line3#) >
  < cfset aPrimaryContactAddressLine4 =(#mydoc.NetworkOrder.PrimaryAddress.line4#) >
  < cfset aPrimaryContactAddressLine5 =(#mydoc.NetworkOrder.PrimaryAddress.line5#) >
  < cfset aPrimaryContactCity =(#mydoc.NetworkOrder.PrimaryAddress.City#) >
  < cfset aPrimaryContactPostcode =(#mydoc.NetworkOrder.PrimaryAddress.PostalCode#) >
  < cfset aPrimaryContactCounty =(#mydoc.NetworkOrder.PrimaryAddress.CountrySubdivision#) >
  < cfset aPrimaryContactCountryCode =(#mydoc.NetworkOrder.PrimaryAddress.CountryCode#) >
  < cfset aPrimaryContactCountry =(#mydoc.NetworkOrder.SecondaryAddress.Country#) >
  < cfset aSecondaryContactName =(#mydoc.NetworkOrder.SecondaryAddress.ContactName#) >
  < cfset aSecondaryAttentionOfName =(#mydoc.NetworkOrder.SecondaryAddress.AttentionOfName#) >
  < cfset aSecondaryContactNumber =(#mydoc.NetworkOrder.SecondaryAddress.ContactNumber#) >
  < cfset aSecondaryContactAddressLine1 =(#mydoc.NetworkOrder.SecondaryAddress.line1#) >
  < cfset aSecondaryContactAddressLine2 =(#mydoc.NetworkOrder.SecondaryAddress.line2#) >
  < cfset aSecondaryContactAddressLine3 =(#mydoc.NetworkOrder.SecondaryAddress.line3#) >
  < cfset aSecondaryContactAddressLine4 =(#mydoc.NetworkOrder.SecondaryAddress.line4#) >
  < cfset aSecondaryContactAddressLine5 =(#mydoc.NetworkOrder.SecondaryAddress.line5#) >
  < cfset aSecondaryContactCity =(#mydoc.NetworkOrder.SecondaryAddress.City#) >
  < cfset aSecondaryContactPostcode =(#mydoc.NetworkOrder.SecondaryAddress.PostalCode#) >
  < cfset aSecondaryContactCounty =(#mydoc.NetworkOrder.SecondaryAddress.CountrySubdivision#) >
  < cfset aSecondaryContactCountryCode =(#mydoc.NetworkOrder.SecondaryAddress.CountryCode#) >
  < cfset aSecondaryContactCountry =(#mydoc.NetworkOrder.SecondaryAddress.Country#) >

  Since you already have the XML parsed in a document, the easiest is to use xmlSearch(). Take a look at the doc, it is pretty easy to use. Something as simple as:

  To the most complex as:

  And in both cases:

  Read the doc and google is your friend "coldfusion xmlsearch.

• How to check if a table exists in the database or not?

  People,

  Hello. I use the server of Oracle 11 GR 1 material with Oracle Linux 5 database.

  My instance of database is named HRCS90, which the user access Id is MyName, and his identification of user SYS system.

  I have a few questions about user ID to access the PSRECDEL and PSROLEDEFN table in the HRCS90 database as below:

  SQL > select * from PSRECDEL;

  His output under the SYS user: table or view does not exist.

  His output under user myName: no selected lines. This means that the table THAT PSRECDEL exists, and myName user can access.

  SQL > select * from PSROLEDEFN;

  His output under SYS and MyName: table or view does not exist.

  My questions are:

  How to check if a table really exists in the instance of database HRCS90 or not?

  Thanks in advance.

  
  

  If a table is present in the database, it must be present in DBA_OBJECTS. If he fell, he would be present in the TRASH. If he fell purged, it is not available in the database, Cant it confirm you this object is not in the database? See a little test here

  SQL > CREATE TABLE TESTTAB (ID);

  Table created.

  SQL >

  SQL > SELECT MASTER, OBJECT_NAME FROM DBA_OBJECTS WHERE OBJECT_NAME = 'TESTTAB.

  OBJECT_NAME OWNER

  ------------------------------ ---------------------------------------------

  SCOTT TESTTAB

  SQL >

  -Drop table (without purging. So now, it will be in the recyclebin)

  SQL > DROP TABLE TESTTAB;

  Deleted table.

  SQL >

  SQL > SELECT * FROM DBA_RECYCLEBIN WHERE ORIGINAL_NAME = "TESTTAB;

  OBJECT_NAME ORIGINAL_NAME OWNER

  ------------------------------ ------------------------------ --------------

  SCOTT BIN$ 8LKloIv3SYWA0WJ33GS + Aw == $0 TESTTAB

  Now see this case when you use PURGE. If it won't move the table to the trash. First of all I am clear the existing dba_recyclebin to the user entries. Then I'm falling table using purge.

  SQL > PURGE TABLESPACE USERS USER SCOTT.

  Purged tablespace.

  SQL >

  SQL > SELECT * FROM DBA_RECYCLEBIN WHERE ORIGINAL_NAME = "TESTTAB;

  no selected line

  SQL > CREATE TABLE TESTTAB (ID);

  Table created.

  SQL >

  SQL > SELECT MASTER, OBJECT_NAME FROM DBA_OBJECTS WHERE OBJECT_NAME = 'TESTTAB;

  OBJECT_NAME OWNER

  ------   ----------

  SYS TESTTAB

  SQL > DROP TABLE TESTTAB PURGE;

  Deleted table.

  SQL > SELECT * FROM DBA_RECYCLEBIN WHERE ORIGINAL_NAME = "TESTTAB;

  no selected line

  SQL > SELECT MASTER, OBJECT_NAME FROM DBA_OBJECTS WHERE OBJECT_NAME = 'TESTTAB;

  no selected line

  Since there is no entry to both DBA_OBJECTS and DBA_RECYCLEBIN. So that means that the particular object is not in the database.

• How to change a site with two computers

  Hello

  What is the best way to change a site with two computers?

  Dreamweaver on both computers?

  Select your Check-In / Check-Out

  http://help.Adobe.com/en_US/Dreamweaver/CS/using/WSc78c5058ca073340dcda9110b1f693f21-7ebfa .html

• My computer has happened in a power safe mode and I cannot restore without rebooting. How can I prevent this from happening on the Vista operating system?

  My computer suddenly goes into safe mode of power and I am not able to restore in normal mode without rebooting the computer. How can I stop this from happening? My OS is Windows Vista Ultimate 64-bit.

  Thank you

  JO Ann

  Hello

  You should be able to solve this problem by activating the mode Hibernate in the command prompt. If she hibernates, it will save an image where you are on your hard drive and you will be in business once the power returns.
  You must also make sure that your power options would spend in hibernation mode when the power is lower at some point.
  1. Click Start and type 'CMD '.
  2. Right click on CMD and run as administrator.
  3. Click on continue when you are prompted.
  4. "Type in the command prompt" "" powercfg.exe /Hibernate on.
  5. Go to the options to be able to enter the control panel by typing in "Power Options."
  6. You will see the different power options. The one you have selected, that's what you are currently using. Click on "change plan settings".
  7. Click on "change power avancΘs."
  8. Scroll down to the battery and you will see the options of low battery and critical battery responses. Make sure they are set for the hibernation.

  I hope that after these steps, your problems. Please let me know if you have any questions.

• How can I stop programs@from running in the background?

  programs - I never userun in the background as institutional calendar. I would like to launch a clean background and a sleek office. Is ok to ermanently remove apps / programs I not have access? or better yet I can remove the icon without deleting the program I talk about these programs preinstalled. latter case your room for answerng this - what is the diffrence between apps widgets n programs on the droid.

  I'm sorry it explained not completely. I will try. Default apps cannot be uninstalled or removed. You can go into management applications in the settings and force closes, but it can start up if the operating system decides that she needs. There is an application that will allow you to hide the icons, but I don't remember the name. I don't know of a setting in the calendar application to prevent it from running. You might want to make sure that it is not set to automatically synchronize. This could be the reason why he is running. So the only way I know to keep them from running in the background is using a task killer, so the answer is always the same. I hope that I have cleared it up a little bit.

• How to check my site to site vpn using ASDM?

  How can I check that my VPN site-to-site really works by using ASDM?  I was expecting to see some sort of graphical OWL or a counter is ASDM, but I see nothing.  The CLI by "sh crypto ipsec SA" I see the program and crypt increment so I think it works.

  ASA5505 at each end

  The ASA version: 8.0.5

  ASDM Version: 6.3.5

  Hi Tod,

  on the cli, indeed the counters in "crypto ipsec to show his" will tell you if the data passes over the tunnel.

  In ASDM, you can go to monitoring-> VPN-> statistical VPN-> Sessions and select "IPsec Site to Site" as the filter.

  I do not think that we have graphics for data on the tunnels, but you can have a graph of the number of active tunnels (surveillance-> VPN-> graphics-> tunnels IPsec VPN connection)

  HTH

  Herbert

• How can I import data from history, including the time of the on-site visit?

  When I opened my "History" tab, I can then select in the left column, for example "in the course of the last seven days' and then select 'Copy' in the tab 'organize '. But when I paste it into an Excel worksheet, the only information that appears is the Web site. Is it possible to import also the column "date of visit?

  You will need to use an extension like SQLite Manager to export history to CSV.

  • [835204/questions/835204]

  You can add more columns if necessary.

• I have yahoo mail. How can I transfer files from messaging on the disk?

  I have yahoo mail. How to transfer files of mail on a cd?

  Hello

  I suggest to post the question in this forum and to check if it helps:

  http://answers.Yahoo.com/dir/index;_ylt=AoOLgsBcEL5ubwVj3Lmqqzie5HNG;_ylv=3? SID = 396546089

  It will be useful.

• How can I prevent people from seeing where the email has passed since?

  How can I stop showing where email is transmitted from

  How can I stop showing where email is transmitted from

  Select and then delete the addresses in the e-mail message.

  And when you send an email if you do not want your visible list of recipients used the bcc function.

  http://ask-Leo.com/how_does_using_bcc_help_reduce_spam.html

• How can I remove programs from starting when the system boots.

  REMOVE AN ARTICLE FROM THE START UP PROGRAMS

  Whenever I start my computer, it opens and begins to operate more than one program automatically. One is pinned to the taskbar, but others are not. How can I tell the computer which I do not wish for the programs at startup? Any help you might be able to give is gratefully received. Thank you.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902

  Start the program and click the Connect tab uncheck the entries that you do not want to start.

  Not uncheck anything that you are not sure you know what it is. Your computer may not work correctly or may not even start.

  You can also look at the options of programs that start automatically. It may be possible to disable them.

  Look in the startup folder in the start all programs Menu. Right click and delete any entries that you don't want.

• How to check that an announcement printed in the magazine - Workflow

  Hello!

  Without knowing about the publication, asked me to create and submit ads with my digital photos (and text on them), to high-end magazines.

  So far I have no complaints after a year to do, but there are things that I want to be able to do and do not know how.

  For example, to check that the final announcement has fillings or the best dynamic range possible for CMYK.

  It seems that after exporting the PDF from Indesign, I can rate it on acrobat (preflight?), which seems to be a good workflow.

  I couldn't find, however, a lot of documentation on the whole process of preparation of a photo to be printed (photoshop and Indesign), dealing with the ICCS, CMYK, standard magazines, preparation of the PDF file and finally evaluate the PDF file with the "print production tools.

  In fact, I found a lot of conflicting information.

  Does anyone know a great book or resources on the complete workflow of place once loved photos in Indesign, all the way to analyze a ready CMYK PDF (the proofing or preflight, not sure what the difference between) in acrobat pro?

  FYI: I save the file with ICC (sRGB) in Photoshop and performing the conversion to CMYK in Indesign when you export to PDF, no CCI format.

  Thank you!

  As for TAC, what happens if it shows that you are above the limit. How do fix you this?

  The total ink limit is integrated in the profile, which is another reason, you want to have the right profile to your document if you export to X - 1.

  The gray and black balance amount of generation is also integrated in the profile, so in Photoshop, if you set the workspace CMYK in the color on the destination profile settings, you can keep the image in RGB mode and see the exported values when you set the Panel Info to CMYK. If there is too much magenta in black and looking for neutral, chances are that your RGB values are not even.

  I have a gray fill AdobeRGB in Photoshop with GRAcol defined as CMYK for Info workspace displays the conversion numbers. In InDesign GRAcol is assigned CMYK profile if I get consistent numbers in MS for the placed image preview. And when I saw the export of PDF/X-1 of the output gives me the same numbers, but the object is now CMYK not RGB.

  

  

  

• How can I design site with downloadable content?

  OK, I admit it - I'm not an expert in Web design. But I've been looking at Muse (since I have with CC in any case) and I like the simplicity of it.

  However, the only thing that I really need in order for me to make a website for a church is the ability to easily continue to add messages to mp3 (per week) on the site for people to download.

  Muse do something like that? I just feel that this is impossible. But what can do? Of course, it can be done because there are tons of sites like this.

  I need to be able to sort files by title, author, Date and category. And this ability to sort is probably something else any feature that would be necessary. Can someone please shed some light on this software out there can do? Or what software can do only one page for me and allow me to copy all the code and paste it into Muse? Maybe it's impossible, I don't know.

  So basically all I know is what I have to do and I don't know what direction to go. I know that I could go and download all the web design software and learn and see that we can do, but I don't have time for this!

  Thank you very much!

  ~ Delmar

  Hi Delmar,

  You can certainly make mp3 files in Muse. I wrote about this in this post Re: creation of links to MP3 files

  However, if you want to sort the files by title, author, Date and category etc, looking likely to put these details as the individual records in a database, and in the development of web site you would then be able to provide research and options of sorting where the information from the records in the database are retrieved.  This isn't something that you can with Muse in native mode. You seek using a CMS and then need to look at how you can bring content from the CMS in Muse.

  This is a recording of a Jam of Muse, which will give you an idea on how this could work (with Business Catalyst and adding a module announced in that case, but the idea behind what you want to do would be similar): Muse Jam Sessions_61_Muse with integrated CMS BC

  CARI