assignment of keys problem

Hello, I'm new as a developer on BBZ10.

The signature assignment form, I can't check the first box to the 10.3 SDK, let me explain...

I want to know why I can not check the first box, only the second key to the 10.3 SDK.

When I check the first reference to me there's always a connection ID. In fact the first box and a link that always makes me come back. Is this normal and why. I have 10.3.1.1565 version, while the 10.1 SDK is valid for this version of develop, I prefer the 10.3.

I install Momentic IDE 2.11 (Momentics - 2.1.1 - 201411071638.win32.x86_64) and install the sdk 10.3 yet, but I do is the key for 10.1 SDK. Thank you for your response.

For more information about Windows 8.1 to install the 2.1 SDK native BlackBerry (BlackBerry PlayBook and BlackBerry 10 using the 10.1 SDK or less), it must be put into Windows 7 compatibility mode, otherwise it will not be installed.

Welcome on the support forums.

what form of key assignments are you talking about?
Maybe you could guide us with a guide step by step to reproduce your problem?

Tags: BlackBerry Developers

Similar Questions

  • Assign special keys on top of the keyboard

    How to assign special keys on top of the keyboard that is to say "My Documents", "My pictures" 'My music' etc. Media, Mail and Web/home buttons seem to work very well, but not these first three.

    OK - I have now installed the PS/2, as suggested - what next drivers please?

    David

    Just to be sure - you have a PS/2 type keyboard and you are * not * using adapters to plug into the computer via USB, correct?  In fact, it is connected to a PS/2 port?

    Technically - if she was going to work - it should work as soon as you have installed the drivers.  I don't think they were ever "programmable" - not without hacking the registry a little.

    May read this article...

    http://www.blogfeld.com/2009/11/Natural-Keyboard-Pro-Windows-7-Vista.html

    And note these registry entries / this area in the registry:

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey]

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\15]
    'Association '=' mailto'

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\16]
    "Association"=".cda".

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17]
    ' ShellExecute '=': {20D04FE0-3AEA-1069-A2D8-08002B30309D} ".

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\18]
    "ShellExecute"="calc.exe"

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7]
    'Association '=' http'

    Maybe with a little persistence (looking at the ein right located the registry and put in some creative entries) you can get them working again. :-(

    Sorry, I couldn't find more - it is difficult to help with certain things when you can not try it for yourself. Heh

  • Problem by setting the primary key: relaxation Assigned primary key in the sequence.

    I have a table and a trigger for insert/update on the table. Trigger I get the game of the primary key of a sequence. I tested unit by inserting records in the table. It works very well. Kets primary key the next sequence number.

    I use this table as an entity in my adf application. The primary key attribute is set to "DBSequence". But when inserted I do not receive the following sequence for the primary key. Instead it is inserting the temporary number - ve that assigns the adf.

    I use JDeveloper 11 g.


    Can someone tell me what could be the problem?

    Your trigger should be something like:

    create or replace TRIGGER "SID_ASSIGN"
     before INSERT
     ON MY_TABLE
     FOR EACH ROW
    
    BEGIN
    
    if :new.SID is null or :new.SID < 0 then
       SELECT MASTER_SID_SEQUENCE.nextval into :new.SID from dual ;
    end if;
    END;
    

    You can refer to the guide of Dev of 11g for more details on this...

    Julian

  • Can I assign special keys to move the mouse?

    Original title: is there a way I can control (similar to the mouse keys) mouse with key other than the numeric keypad? I would move the mouse and then click on some of the keys of the alphabet.

    I want to do the following:

    Move down with the Q
    Click on with W
    Move down with e.
    Click on with R
    Etc, etc.
    I know a lot about the mouse, key and others, but I do not know how to assign specific tasks to a specific key, especially outside those on the numeric keypad.

    Hi SirFailzAlot,

    You can use your favorite search engine to search for third-party software to do the same thing.

    Note:   software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • manually assign primary key and copy to the detailed form

    Hi experts,

    Oracle Apex 4.2, 11g database, using windows 7.

    I created a form and created automatic product no. (not only sequence) with logic and SQL. SQL query produced good wise exercise, and exercise begin from 01 July and ends 30 June each year. This means if the 07/01/2015 start it will create a new voucher No.

    The main Table name is GL_PV and the columns are:

    Number of PV_No

    Date of PV_Date

    Number of CC_code

    number amount

    Remarks varchar2 (100)

    Created a process to submit before the calculations and validations.

    The codes are

    NVL SELECT (MAX (to_number (nvl(pv_no,0))) + 1, 1) AMENDMENTS

    IN: P15_pv_no

    OF GL_PV

    WHERE pv_date

    BETWEEN to_date (' 01-07-' |) (extract (year from to_date (: P15_pv_date, "dd-mm-yyyy")))

    + case when extracted (month of to_date (: P15_pv_date, "dd-mm-yyyy")) < = end of another 0, then 6-1), "dd-mm-yyyy")

    AND to_date (30 - 06-' |) (extract (year from to_date (: P15_pv_date, "dd-mm-yyyy")))

    (+ case when extracted (month of to_date (: P15_pv_date, "dd-mm-yyyy")) < = 6 then 0 otherwise 1 end), "dd-mm-yyyy")

    and cc_code =: P15_cc_code;

    and press the button when Conditions = Generate_Button

    In the form of master I put the data and click on create button is working well and generating good can result.

    Now that I've created a detail of my detail table is pv_detail and the columns are

    pv_voucher_no

    pv_date

    account_code

    Remarks

    amount

    I want to create the relationship of the master / detail form.

    I tried:

    • primary key and foreign key, but does not. column GL_PV table primary key (PV_NO, PV_DATE), PV_DETAIL (pv_voucher_no, pv_date) foreign key table columns: -.
    • has created one for master and 2nd 2 form for details, good master shape generates but not detail of.

    I want to assign pv_no, pv_date in both value table (master / detail), in other words copy value pv_no and pv_date of main table in detail table pv_voucher_no and pv_date.

    Please advise how I can solve this problem.

    Thank you forum oracle to solve my problems.


    error report: ORA-01790: expression must have the same type of data, matching expression

    Find the solution on this forum

    Solution:

    Attributes and the tabular form:

    Change the default type = PL/SQL Expression on the function

    Default = to_date(:P15_PV_DATE,'DD-MON-YYYY')



  • Re: Satellite A660-1EK - FN keys problem

    Hello
    I don't know how I did that... but yesterday my mobile function buttons worked, but now I press fn + f6 or fn + f6, it must change in light of the screen, but there is nothing.
    There is not a problem with the fn key because when I press keys fn + 3 or by changing its fn + 4.

    How can I solve my problem?

    Since when is FN + F4 or FN + 3 for the sound?
    As far as I know it's for the standby and hibernation.

    Try also first roll back OS to an earlier time using System Restore tool. Make back two or three days.

  • Satellite Pro A300 he can't start WLan - Fn + F8 key problem

    Hello

    I have a wireless satellite pro a300-1nt model problem... I have instaled win7 ultimate (32 bit) and and all the Nice work, except that... in the household of wireless device is all ok, windows recognizes the card, he said all work perfectly... but when I try to start it, nothing happens. When I try to solve the problems they say "WiFi is disabled" and something like "Use the power switch on the front of the computer, or the function keys, if necessary activate wireless", but when I use Fn + f8 nothing happens...

    Now I don't know what the problem... don't know what to do... windows recognizes the card, but I can't start with buttons: (...) I have try all the drivers that I can find but nothing, if someone have similar problem or know something useful, please share... :(

    Thank you
    Aleksandar

    PS Sorry for the bad English

    Hello

    You have installed Win 7 but you didn t install some tools that controls the FN keys!

    You need to install the support card Flash Utility and added value package!
    You can find that both page European driver Toshiba Satellite L500 download area!

    PS: I think you should also check the BIOS settings. Some BIOS contains an option to toggle the wifi.

    In addition, go to-> properties Device Manager card Wlan-> Advanced tab
    Here, you can activate Wlan card too!

  • Satellite 5200: Function key problem

    Hello

    Recently the function keys have stopped working on my satellite 5200. When I now hold the function key and attempt to use one light you, sounds, etc., buttons, nothing happens.

    Any idea settings or what I've done, I need to check.

    Thank you.

    Paul.

    Hello

    I also had similar problems with a Sat5200 from a friend.

    We have a United Nations - and reinstalled the common Modules Toshiba, Toshiba Hotkey utility and Toshiba controls.

    then it worked again!

    Rudi Bye

  • USB keys - problem with the Recovery Manager

    I bought a 16GB Kingston DataTraveler 112 USB key so I could copy the recovery as a backup image. He acknowledged the USB key and showed that the recovery image has been slightly more than 11 GB. But when he started to format the USB key, it returns to the previous screen and asking more of the car. At the bottom of the screen, he said to contact the HP Support, but it gives me an error message. Now when I try the Recovery Manager it does not recognize the USB at all.

    Before that, I had bought another 16 GB USB - don't remember what brand. I have 5 other USB drives, but they are all small, except a 32 GB Kingston DT101 G2 which does not work on this computer, even if it worked on my old computer (Pavilion w/Vista Home Premium) without problem. All these USBs, including the new Kingston are for USB 2.0.

    Operating system is Windows 8.1 64-bit on the desktop HP Pavilion 500 - A60. I tried the problem that USB keys in all 4 ports (2.0 and 3.0). Also in that I plug into a port to give me 3 USB ports, also used on my previous computer.

    Is it possible that this computer does not recognize Kingston or some other brands of USB thumb drives?

    The trick to this is to use a USB 2.0 port and use a non-windows 8 certified thumbdrive. If the USB flash drive shows as a 'removable device' there should be no problem in the use of the media to create a recovery media

    I had a lot of success with a 16 GB Transcend USB 3.0 flash drive.

    I own a couple of DataTraveler flash drives and had the same lack of success, creation of recovery media that you did. I have had zero success with 3.0 of Sandisk Extreme usb flash drives

  • Flashcards and Fn - Satellite A200 psae6e key problem

    Hi all.

    I read a lot of posts with this problem.
    I noticed some people fix with value Canadian extra package, but is not a Canadian package extra for my model.
    I have a200-psae6e. But I download Canadian version, it is not for my model, I installed it but it does not work. Flashing cards do not appear.

    Then I installed the extra package for my model and it works fine, but does not work Fn + Fx! I have
    the value cards turn signals don't start up with Windows and now I can use Fn + Fx but only for keys ESC, F1, F3, F6, F7 and F11, other do not work!

    Can someone tell me how to force the other keys work?
    I didn't need flashing cards if I have good, that also I don't have turn signals with Fn + Fx cards keys don't work all the keys.

    Is there a solution?

    Same problem with my computer, but even worse because when I push button FN of my computer crashes. Nobody seems to know the solution. If you can, uninstall all versions of VAP, you have and try to reinstall one with advanced options, common Module is checked and pray. I think that some components of vista update is related to the normal working FN.

  • Satellite L750D - brightness FN key problem

    Hello

    Had a bit of a problem, trying to figure out why my screen was black, worked through HDMI and a second monitor ran without drama, but as soon as the diagnosis established, is to adjust the brightness of FN keys.

    When I put my brightness key FN adjust less than 6 years (5 or less) it will clear, black (black not total as long as the information is still there but almost impossible to see).

    I launch colormunki on that on the screen which is currently updated the color profile.

    Does anyone know if color monitors of profiling leads to problems of drama with the brightness of the screen FN?

    Or maybe it is something different all together.

    Hello

    It seems that the portable computer s display supports the LED backlight.
    Usually the FL inverter controls the backlight of the display.
    As far as I know than the Panel FL inverter and LCD are connected to the motherboard. The fluorescent lamp is connected to the FL inverter Board.

    In your case, it might be possible that the screen, fluorescent lamp or the FL inverter might not work.

    Don t think that the graphics card is affected from the external screen is OK.
    So in your case, I would recommend asking a single Toshiba ASP to check parts

    By the way: have you tried to update the BIOS or the display driver? I think it is worth a try before contact with service agents.

  • Arrow keys problem

    I have the problem with the arrow keys (up, right, down, left).

    When one of these keys is pressed, not quickly and at any time, the cursor continues the movement about a second after the button is released.

    So it is possible to adjust the slider to the position of certain precisely if there is carring out pressing short-term.

    Hello

    > When one of these keys is pressed quickly and at any time, the cursor continues the movement about a second after releasing the button

    I think I know why this is happening.
    In my view, pressing one of these keys cause an overload of the processor, and this could be caused by dysfunction of the keyboard.

    I think the laptop technician should replace the keyboard and must verify if this strange problem seems once again.

  • Satellite L500-1XU - FN keys problems

    Hello!

    Since I bought my laptop (Satellite L500-1XU), I have a problem with my keyboard I can't understand.
    It happens that without + Toshiba added economic package for Win7-32 bit + ([this version | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/download.jsp?ct=DL&soid=2485090&ref=EV]) some work of combinations of FN (such as the ESC, F1, F3, F5, F6, F7) but the rest of them do not work.

    So, I install PVAT and now none of them work. If I click on any flash card it makes his work, but the key to refuse commands to work.

    My guess is that the PVAT version I use is incompatible with my laptop model: http://img15.imageshack.us/img15/9746/satellitel500.jpg
    But I can't find the right version. So I ask for your help.

    If you have any ideas please press on answer.

    Thank you for advice!

    Sand0

    Hello

    Your laptop belongs to the series of Satellite L500 PSLJFE.
    Go to the page of European Toshiba driver and download the VAP and card utility for Satellite L500 PSLJFE flashing support.

    This should help!

    Otherwise you have some registry problems and in this case, you must clean the registry with CCleaner for example
    This free tool cleans the BONES once you should install VAP and Flash cards again.

    Welcome them

  • Code key problem

    Two copies of Vista Ultimate has acquired five years ago.  Each has its own key code which worked without problems.  Now I find that one of them now refers as "invalid" want to pursue this but do not know the proper channels to do so.

    Try to activate by phone.

    How to activate Windows 7 or Vista manually (activate by phone)
    http://support.Microsoft.com/kb/950929/en-us

    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone * do not select/press any option * and wait for a person to help you.
    (6) explain your problem clearly to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    Activation and registration of a Microsoft product
    http://support.Microsoft.com/?kbid=326851
    Windows activation: (888) 571-2048
    (888) 725-1047 or 800-936-5700

    J W Stuart: http://www.pagestart.com

  • HP Pavilion dv6-3055tx keyboard key problem

    Dear Sir

    My laptop is HP Pavilion dv6-3055tx and win 7 ultimate 64 bit installed.

    Leave for a few days, I noticed that three keys on my keyboard don't work all the time that the wifi key is YOU.

    These keys are:

    1 remove

    Left arrow 2

    Right arrow 3

    When I disable the wifi key, it works normally.

    I don't know what really is the problem?

    Please help me with this problem.

    Thank you

    Hello

    Sugg_r_es following.

    Open windows control panel, open Device Manager, expand keyboards, right-click on the "Standard PS/2 Keyboard" entry and select uninstall.

    Shut down the laptop - if you're running Windows 8/8.1, do it by holding down the button SHIFT left click Shutdown to temporarily prevent a hybrid boot.

    Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Kind regards

    DP - K

Maybe you are looking for