at &; t 4g microcell by iMac
I want to spend my AP extreme and the modem out of my room, but I have an at & t / cisco 4 G microcell, which must be on an ethernet connection to work. not knowing some of the iMac internet sharing function, is possible to connect the microcell cisco from my iMac to the ethernet with sharing on the internet? I tried and it connected to the internet, but 4G is not complete.
all solutions?
I have actually managed to do work, it takes some time, lol
Tags: Mac
Similar Questions
-
I have an IMAC of 2008 with 2 GB of memory plus 300 GB of storage. If I buy 2GB of memory I'll be able to download Sierra?
Mike,
No, macOS Sierra is not compatible with your hardware.
Here is an analytical compatibility.
-
I need to buy new RAM for my iMac mid-2011. What are the specific specifications?
I have a mid-2011 iMac, 21.5 inches, with an Intel Core i5 to 2.7 GHz and 4 GB 1333 MHz DDR3 processor. What RAM memory should I buy? There are a lot of options with different specifications listed on Amazon, and none seems correct. Help, please! Thank you
Jbdammarell,
I used OWC computer for my needs memory. Here is their recommendation for your computer.
-
Freezes and restarts on 2015 5K running El Capitan iMac and am ready to freak me out
Hi guys,.
If I posted my check and reports being panic, could someone tell me what caused random freezes and restarts on my iMac 5 K - ish, El Capitan running? I am a designer/Retoucher and I am in the middle of a big job, of course.
He went on and off for a few months. I have cleared my startup disk and played fresh OS installs (didn't even use Migration Assistant just to be safe), three times. I installed apps one at a time try to refine what is the cause but could not.
At first I thought it was my mouse Logitech G502 because when I went to an old mouse for a few weeks the problem has disappeared. But yesterday, listening to iTunes via Airplay and working in InDesign, the system froze again.
I wonder if she might be SoftRAID(4) and/or my two RAIDs of 4 external ThunderBay?
Thanks in advance!
Steve
We can take a stab, please publish a report full of EtreCheck, and if we do not see everything that you can post your last report KP.
-
Why are the 'minor' photos in the new iMac with K5 of the retina (using photoshop)?
In English
Hello.
I met a 'problem' with the new iMac (retina 5K, 27 ", at the end of 2015).
When I edit pictures in Photoshop, I can't get the images blown up big enough and the fillings of slide show they do not rule out even at a size of 72 dpi and with dimensions of 3000 x 2000.
What don't I understand?
Help would be so nice, thank you in advance.
By Bjarne.
PA Dansk
Hej.
JEG er pa stodt and 'problem' med den nyeste iMac (retina 5K, 27 ', ultimo 2015).
NAR jeg redigerer billeder I Photoshop kan jeg ikke fa billederne blaest stort nok op og ved diasshow fylder ikke skaermen ud ved en str pa 72 dpi library pa med og selv 3000 x 2000.
Hvad er det jeg ikke forstar?
Tants city limit his BRA, pa forhand tak.
By Bjarne.
What version of the operating system and Photos do you use? Exactly how do you get pictures of Photos in Photoshop?
LN
-
Problems lately with my iMac 27 "5 K. After putting to sleep, it is restarts after about 2 hours. If I wake up it before that date, it is usually very good. But after 2 hours, it restarts. Sometimes, I find it just be stopped. Most of the time when it restarts itself, it crashes with this gray bar filled about 80% progress. I have reset the PRAM and EMS, checked all the settings in power management (not set to restart after power failure for example).
Another problem I 'bypassed' which may or may not be related (I'm including in case it is related) is that on El Capitan, my magic trackpad would randomly wake the iMac. I had to disable the option to allow devices BT wake up the Mac. When I upgraded to Sierra, the iMac still wake up randomly due to an event of BT. After a lot of trial and error, activate the option "allow bluetooth to computer devices" back prevented the wake-ups at random and let me wake up the computer again deliberately with the trackpad. Very strange.
In any case, I'm usually pretty ingenious to resolve this sort of thing myself, but the Console to Sierra news is terrible. Or maybe it's the system logs that are terrible, because I can't find anything about the causes of previous judgment that might provide a clue as to what is happening here.
So, any advice on how to solve the problem or at least to determine the causes of the previous stop would be greatly appreciated!
Other information that might be relevant:
Wired devices:
USB: 2 external HDs (a WD and a Seagate) for backups TM
Apple keyboard
Thunderbolt: 27 "Thunderbolt Display (Apple)
It's a DVD-ROM of Apple and a trendy optical audio dongle, both
All 3rd party extensions you are running?
EtreCheck is a simple little app to display the important details of your system configuration and allows you to copy this information to the Clipboard. It is intended to be used with Apple Support communities to help people to help you with your Mac.
http://www.etresoft.com/ etrecheck
-
What advantage is there to install OS X Sierra on an iMac mid-2011?
Have the last what OS X installed in order to run the latest versions of applications such as Safari.
Before upgrade you, be sure to back up all your important data.
And check your third-party software, IE., the printer drivers to ensure that they are compatible with macOS Sierra 10.12.
-
I recently installed Sierra on my iMac and you encounter problems with Siri. The main problem is that while Siri is enabled I can't him to hear me. I rechecked the microphone (internal) working and activated, I rechecked Siri is activated, I turned on and outside dictation and I did the same thing with the computer without joy.
I know that the microphone works as it works well with Skype etc, I simply can't Siri to hear me. Help please.
Hey, Siri, if that's how you try to use it, is not supported on Mac. You must enable Siri via the Dock or menu bar icons.
-
iMac, loss of internet connection on sleep
I have remote on my iMac all the time. I have problems with it the loss of connection to the internet since the upgrade to Sierra. I connected to the internet via an Ethernet cable. I'll lose connection 10-15 minutes after leaving my computer and access it remotely. I "Wake for network WiFi access" checked and enable the display of SETTING for 10 minutes. " I just had this problem in the past few days since the upgrade. Any help would be greatly appreciated, I also use it for the presentation of work very frequently and lose the connection during their. Thank you
Tom
Not quite the same thing as I'm not trying to access remotely, but since the upgrade to Sierra, my iMac mid-2010 do not reconnect to the wifi in the morning. It is not slow, it will not reconnect all until I explicitly select the network. I don't have this problem before the Sierra, and it doesn't seem to affect my Air mid-2012 (also on the Sierra).
-
synchronization of the agenda of iMac problem
my calendar works fine to and from the iPhone and iPad and iMac fine. However, the calendar entry made on my iMac won't sync with my iPhone and iPad.
Someone else you have this problem and found a solution?
Ensure that the calendar is selected in the preferences system - iCloud on your iMac. Then also make sure that you choose the right calendar in the calendar app!
-
pop up saying that a device is connected to my Imac with IP
My iMac is completely compromised after having an intrusion on my internet router.
I supported everthing this summer. I tried to reset my IMac to factory settings.
A pop up came in September saying that another device is connected to my internet
connection with an IP address. I called my provider of intellectual property, and they said it was a
Xerox printer. I don't have a Xerox printer.
I followed all the steps in trying to get rid of malware and successfully, I think, to get rid of
It is for 1 or 2 days. But something else is in my system.
Because I tried to protect my computer. I'm changing my internet provider
This week and I would like to hide my IP to my iMac.
Hide my IP to my iMac when I'm on the internet?
K
Depending on your router model, there should be a way of
disable DHCP. It is a method used by the router to assign
IP addresses on your local network when any device attempts
connect you to it. You can then manually assign IP addresses to only
These devices that you want to have access to your router.
If you haven't already done so, you must also change the password (and also
username if the router required) to something else and much stronger.
If it is always the default, with which it was delivered, anyone can understand this.
In addition, if the router is a network capable wireless as well, you must disable the comments
access and create stronger passwords.
Also, make sure that all firewalls is enabled on devices and the
router.
As every router is different, you will need to check the manufacturer's instructions
to make these changes.
-
Early 2008 iMac upgrade to El Capitan
El Capitan has disappeared from the app store. How can I upgrade my iMac 2008 start of the Mavericks El Capitan now? (Apple he will not go to Sierra.)
Try here:
https://iTunes.Apple.com/app/OS-x-El-Capitan/id1147835434?MT=12
-
Canon MG7100 prints but will not scan after update of the iMac? How to fix?
Canon MG7100 worked very well with the iMac - scanning and printing. After doing the updates of the iMac and installation Siri scanning does not work. Always printing. The printer/scanner Canon said - Set PC to start scanning - I have MG7100 added on the iMac. I opened (and re-locked) firewall to let in the Canon UJ utility. I deleted the all-in-one Hi - and added MG7100.
http://support-Asia.Canon-Asia.com/contents/Asia/en/0100535401.html
doesn't look like canon has a printer that takes in charge the newer versions of Mac OS x, if I were you I would take contact them to see if they plan on support of new versions, apple made no drivers for the hardware they don't and if hardware manufacturers does not provide a working driver head can group with the new version of Mac OS x We have to rely on manufacturing to have a download on their page
-
To upgrade my iMac Yosemite Sierra can I first of all backup and upgrade the iWork etc. applications. ?
He can't make a backup. You don't need to do anything else.
-
I am looking for a the Tiger dmg file to restore my iMac. Is there anywhere that I can buy it on a USB?
If you do not have the gray disc that came with your iMac, you find a Tiger retail installation disc. If your iMac G5, according to your iMac G5 model, there are a few considerations... Find your model of G5 iMac special on this list
http://www.EveryMac.com/systems/Apple/iMac/index-iMac.html
and click on it to view their profile page. Looking for pre-installed on MacOS. Originally, it came with a version of the Tiger (10.4.x), the version of the Tiger on the installation of Tiger retail disc must be later than the preinstalled version. First iMac G5 models came with Panther (10.3); can use any install of Tiger the retail disc. A G5 iMac can also run Leopard (10.5.x). 10.5.8 is the last version for Mac PowerPC.
This article shows the installation of sale image retail drives and offers some tips
NOTE: Mac PowerPC generally will not start USB external drives (such as 'thumb drive'), only FireWire.
Maybe you are looking for
-
Connection keyboard and mouse USB Wired stall
Hello My computer repeatedly interrupts the connection to my Wired USB mouse and keyboard. Usually around one every 30 seconds, the connection falls for 1 to 1.5 seconds, then comes back. Meanwhile, the cursor hangs - I can't click anything, and I
-
How can I delete the old emails?
More 29 000 old e mails come up - I can remove them one at a time, but how do I delete them all of a sudden?
-
I've updated to 17 FF and use Windows 7 on a 2 year old Sony Vaio laptop. Since the update, I can't click on some links, most of which seem to be located at the top of web pages. I also have problems with click and hold to scroll through the long (on
-
Apple where are you? Whit El capitan on my iMac late 2009 the SD slot is not recognized, is gone. The problem is known. Why Apple does not repair?
-
Question on recovery of product for Satellite A30 - 514
After the start of recovery of product using OS provided a disk displayed the Setup with error number 11122 stops with the message "cannot load the bitmap file. height max 100 ". Also asked why recovery at startup on screen message States, loading of