AT & T Uverse and WMC Vista

Similar Questions

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• Manually download the update for Windows Server 2008 and Windows Vista platform

  Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

  I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

  Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the Error Message When you try to download and install Vista Service Pack 1

  Hello

  Update Windows guard neglect when you try to download and install Vista Service Pack 1 and I get the error message 80092004.  Please notify.

  Thank you
  Andy

  Hello

  Welcome to the windows vista forums.

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Click the Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click Services.
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.

  Don't forget to restart and then try the update again. If there is no corruption in that
  folder, it would be gone now.

   

  Please, try now to windows update and check if you get the error.

  You can also download the stand-alone SP1 package. You can download the windows vista SP1 by clicking on the link below, please follow the instructions in method 3 in the KB article:

  http://support.Microsoft.com/kb/935791#Method3

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• Security and Windows Vista

  I had problems that someone told me that Malware Bytes would take care of... the trial version is free and it helped.  When the problems started once again I had to get the paid for version - back in Oct.  Well today I went online and there was a MB message saying I should check the box... etc.  But it does not work.  I spent several hours trying to fix it, and finally I deleted it from my computer.  Except that he would not go.  I get the message "he is not on the computer"... but it's always on the opening screen and control panel and it won't go anywhere.  I had to delete Mozilla Firefox because I couldn't use it because of Malware Bytes.  It's crazy.  I'm currently waiting for the help - hoping that someone will tell me how to reformat the hard drive, so I can just start over and reinstall Vista.  I do not have a more recent (Windows 10) but I learned not to use it again.  If anyone of you have any ideas on how to get off my computer from the Malware Bytes please let me know.  Thank you.

  Hello

  The free version of Malwarebytes is free to use as long as you want at the moment.

  If you have problems with paying them for the version, you will need to contact their support.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can try this free Revo Uninstaller program to remove it.

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  "How-to" instructions for use are included here: read the information on the tabs at the top.

  See you soon.

• Avira Antivir is compatible with Windows 7 and Windows Vista?

  Avira Antivir is compatible with Windows 7 and Windows Vista? I have ECS MOTHER card and 1 GB of DDR2 Ram, 160 Gb HDD.

  I have not tried on Windows 7 yet, but yes, it is certainly compatible with Vista. Steve Hebert - MVP Microsoft Internet Explorer

• I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

  I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

  Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

  Virtual private networks have little to do with the domains or working groups.

  I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

  In my opinion, the best way to share a printer is to use a printer connected to the network

• What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

  What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• I have a desktop computer with Vista business I want to upgrade to Windows 7 and install Vista on a laptop that has XP Pro but is Vista capable.

  Transfer Vista Business on XP Pro computer.

  I have a desktop computer with Vista business I want to upgrade to Windows 7 and install Vista on a laptop that has XP Pro but is Vista capable.

  Hello

  If you use the Vista licence as part of the upgrade to Windows 7 you cannot use the license of Vista anywhere elsewhere

  It is part of the upgrade process

  and also read this on licensing rules;

  If Windows was preinstalled on your computer, Dell, HP, etc., or you bought an OEM/license disk, they are both classified as an OEM license and are not transferable.

  The Windows OEM license is linked to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a retail Windows license, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

• I have avg free 2011 and windows vista - do I need a firewall or I have a?

  original title: firewall

  Hello

  I have avg free 2011 and windows vista - do I need a firewall or I have a?

  If I need a free Zone Alarm would be correct?

  Thank you

  Chris

  Windows comes with a cleverly named Windows Firewall Firewall and AVG has its own firewall, I'm pretty sure. If you are fine as is.

• setting up a dual XP/Vista with a copy preinstalled Vista and no vista CD

  When I learned how to do the dual boot about 10 years ago, I learned that you first install the oldest Windows (95, 98, etc.), and then install the latest copy of windows (server, 2000, XP).

  I just got my hands on a laptop with Windows Vista. He has an unused partition that I would use to make a dual boot with my copy of XP Pro because I don't have the vista installation DVD and it should work better, because the laptop has only 1 GB of RAM. A decent amount of RAM for XP, but not enough for Vista. There are questions I mentioned here , and I hesitated to choose this option as I used my copy of XP pro for a virtual machine to play with she was attending night school

  How can I go about installing XP? I guess if I boot my XP CD and select drive D, it would replace the boot on drive C sector and install mess up Vista Home Premium.  I have no way to reinstall Vista HP that I have only a gateway 64 bit OEM CD rather than an Acer 32 - bit OEM CD and if Vista is something like XP they do not accept other product keys.

  SlickRCBD salvation,

  You're right, Windows XP will replace the Vista boot sector; However, there is a solution. See this link from my Web site:http://vistasupport.mvps.org/install_windows_xp_on_machine_running_vista.htm

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I can not load a CD rom. I get the error message is that the CD rom is 16-bit and my Vista 64 Bit.__What are solutions to make this readable CD Rom in my system.

  I can not load a CD rom.  I get the error message is that the CD rom is 16 bits and my Vista 64-bit.
  What are the solutions to make this readable CD Rom in my system.

  It seems that if the CD is read correctly, but if I interpret your message right, you have problems to install the software.  And if the facts are that it is a product of 16 - bit and Vista is a 64-bit operating system, you won't be able to install it.  Support for older, 16-bit software was removed from Vista and Windows 7.  You would need to consider using a product such as Microsoft's Virtual PC or VirtualBox from Sun Microsystems virtualization to run - and if it were a game, same virtualization may not work.

  'Herb Ellicott City' has written in the new message: * e-mail address is removed from the privacy... *

  I can not load a CD rom.  I get the error message is that the CD rom is 16 bits and my Vista 64-bit.
  What are the solutions to make this readable CD Rom in my system.

• Uninstall and reinstall vista and drivers etx

  Impossible to uninstall and reinstall vista

  Read the info below;

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner