I have avg free 2011 and windows vista - do I need a firewall or I have a?

Similar Questions

• Where can I get a free copy of Windows Vista Home Premium for a laptop Sony Vaio I have my product key, but need to the floppy?

  where can I get a free copy of windows vista edition Home premium? I tried to restore my laptop without success. I think I need a copy of the installation disc so that I can reinstall it with my current product key

  Hello

  There's a photo guide based on the recovery of your model here...

  http://www.Sony-Asia.com/support/tutorial/381906/product/VGN-fz18g

  If you cannot use this method because what did your friend, your options are...

  • Pay Sony for media recovery
  • A base Windows installation followed by installing specific Sony drivers and software from their Web site.

  If you walk down the road of the latter, I would say that, if possible, before you begin reinstalling Windows you download at least the Ethernet drivers and wireless and save in, for example, a USB key. Start your drivers to search for them (and other) here...

  http://www.Sony-Asia.com/support/product/VGN-fz18g/FAQ

  .. everything will be difficult to download if drivers that allow access to the internet are not native to a new installation of Windows.

  Your principled stand against Sony charges for media recovery is, in my opinion, wrong. As I already said twice...

  If Sony did not provide recovery media that they have provided the means to create them

  If you lost or do not burn them and messed up your recovery partition, it's not for lack of Sony.

  My serious recommendation is to accept a fee of Sony for the recovery media. It will make life much simpler for you. For this reason alone, it is probably useful tax, especially considering that you're obviously not a user advanced. Otherwise, why ask the help of a friend and ask for help on this forum?

  I suspect that the links I've seen on this website are actually only valid for Windows 7 media images. If you do not buy the recovery media and go with an iso image download Vista Home Premium, I have to warn about the following...

  • The legality of this is, at best, questionable
  • If it's not genuine Microsoft media you might end by in an even bigger mess (if it works at all)

  Tricky

• I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

  I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

  Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

  Virtual private networks have little to do with the domains or working groups.

  I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

  In my opinion, the best way to share a printer is to use a printer connected to the network

• Some software does not launch - even AVG Free 2011

  Three of my software: AVG Free 2011, the share of the bear and the Windows Media Player do not launch until I 'Shut down', and then it's too late. I thonk it is a virus prevents the launch of these software. I just downloaded and ran Microsoft Security Scanner, but it has not detected a virus or Malware - what could be wrong?

  Hello

  I suggest you perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.

• Internet mail and Windows Vista Home Premium w/Sp2

  1.I have tried all Microsoft Automated trouble her and read the answers on how to not fall just to "blank page" in Internet 8. This centers (page) an auto fix seem to only place I can.

  2. I paid for and had unsing McAfee Total protection very well with my Windows Vista mail (there's a firewall question, but I've always protected). However, I tried the Norton On Line offered free of charge through my Qwest and he made my system slow. So I had McAfee Norton to uninstall and reinstall McAfee., now I can not launch Vista Mail. I keeep can't initialize x 0 80070002 undesirable and can not find the file MSOE. DLL. my computer has enough new hard drive (10 February) and I have a lot of space. I can't believe in the back upward in my c: drive there is no MSDOE. DLL in the many files there.

  Can anyone help?

  This error message is a catch-all message remains Windows 98 and is not accurate.  McAfee and Windows Mail are not compatible.  See www.oehelp.com/OETips.aspx#3 , you need to delete completely McAfee and Norton from your machine.  Download www.microsoft.com/security_essentials which is much less invasive and also get antimalware (www.malwarebytes.org).  Once you have done this, compact and repair the database with my Windows Mail utility (www.oehelp.com/WMUtil/).  Then open Winmail and remove your e-mail account and then close and compact the database to delete the account information.  Open WinMail, and then add that account back again and things should work fine then.

  Steve

• Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

  Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

  According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

  • http://forums.zonelabs.com/showthread.php?t=76985 & highlight = Firefox

  "You must update the following plugin:

  • Adobe PDF plugin for Firefox and Netscape 8.2.6
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
  2. Update of Adobe Reader (PDF plugin):
     • Within your existing Adobe (If you have already installed) drive:
       • Open the Adobe Reader program in your list of programs
       • Click Help > check for updates
       • Follow the instructions to update
       • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
     • Download the full installer (If you have NOT installed Adobe Reader):
       • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
       • Use one of the links below:
         • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
         • See also the download link': http://get.adobe.com/reader/otherversions/
     • After installation, launch Firefox and recheck your version.

• Manually download the update for Windows Server 2008 and Windows Vista platform

  Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

  I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

  Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Avira Antivir is compatible with Windows 7 and Windows Vista?

  Avira Antivir is compatible with Windows 7 and Windows Vista? I have ECS MOTHER card and 1 GB of DDR2 Ram, 160 Gb HDD.

  I have not tried on Windows 7 yet, but yes, it is certainly compatible with Vista. Steve Hebert - MVP Microsoft Internet Explorer

• I need to reinstall window Vista Home Basic on my desk because of the infection by the virus. There is no CD with the PC input. Where can I get the free download for window vista?

  Where can I get the free download for window vista?

  Hello

  1. What is the problem you are having with your desktop computer?
  2. are you using a computer Original Equipment Manufacturer (OEM) or custom it was installed?
  If you use a PC OEM, then contact the manufacturer of your computer to get a recovery disk or restore the computer by using the recovery partition.
  Refer,
  http://www.Microsoft.com/OEM/en/salesmarketing/pages/media-replacement.aspx#fBid=rGc5iuLr9zB
  If you use a Custom / copy the retail of windows, then you can contact the Microsoft Store and provide your room and demand for replacement media number to be sent to your address.
  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246
  See also,
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-to-order-replacement-Microsoft-products-and/fb8230d4-000F-4ee7-b732-c9f8fff28bfd
  Hope this hleps.

• Windows 7 and Windows Vista

  I'm trying to understand the differences in security of Windows 7 and Windows Vista. I am also generally try to understand how Windows 7 is Vista. If anyone has any information they can give me, I would appreicate it.

  At a deep level, Windows 7 is almost identical to Windows Vista, but with minor tuning and adjustments.  You can see how they are in the version numbers:

  Windows Vista is 6.0 internally

  Windows 7 is 6.1 internally (just a tiny 0.1 updated)

  As an example of the update minor: both use UAC, but Windows 7 student autonomous tasks the most initiated by UI so you don't have to confirm as often.

  This forum is for home consumers, to talk further about the security, you can visit our forums for it professionals to http://forums.technet.microsoft.com.

• Blue Screen Driver IRQL blue screen of death Windows 7 Ultimate edition and Windows Vista

  original title: BSOD Driver IRQL blue screen of death Windows 7 ultimate and Windows Vista

  I get the BSOD, and they are different every time.

  I had originally Windows Vista on my pc (HP m8300f) and it worked fine for 3 years until last month, I started to have these BSOD.

  So I thought a new clean install of Windows 7 Ultimate would solve the problem. Well, I was very happy to get the new operating system installed, but a few hours later that darn BSOD appeared and im now distraught.

  What is my RAM? My drivers? My hard drives?

  Computer IM but I'm certainly some type of technology. I have basic computer knowledge and that's all.

  You can download minidump files and find the information system here in this zip file http://www.sendspace.com/file/mfx420

  This issue is very very irritating and has ruined a lot of my work.

  Well up to now (18 hours) my computer has not had the BSOD and what I did is that I removed 1 GB of ram for my motherboard. Their were two sticks of 512 MB. I took them both. Now, I have 2 GB of ram running in my system and had not had a BSOD or an error after you have done this.

  What is the problem with my ram? I now have 2 sticks of RAM on my motherboard and both are 1 GB each stick. What is the mix n match that causes a problem all of a sudden? My computer came with this stock of installation. I also noticed the ram I got were the brand Samsung and the other on my motherboard are another brand.

  Well idk I hope it was my problem. We'll see.

• Free form of Windows Vista to Windows 7 upgrade

  I was told that Microsoft offers a free upgade to Windows Vista to Windows 7.  Is this true?  Thank you

  No, it is not true. There was a free upgrade offered by PC factory last year, but these offers to upgrade expired many months ago.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Resource monitor shows Windows 7 and Windows Vista running different programs

  I followed my programs and other at quite a bit lately since my system hangs and is running more slowly.  I'm trying to understand what might be causing this. I only had Windows 7 loaded on this desktop computer, as I bought it.  However, today I noticed that in the resource monitor to the title of the CPU that Windows 7 is the context of the operating system for some programs and Windows Vista is the context of operating system for other programs (including programs based Apple).  Is this a problem? Could it be added to some of my slowness and crashes?

  This indicates the operating system, the program has been designed to target. If the application does not specify this in its manifesto, it is assigned to a context of Vista. This has been added in Windows 7 that allows new applications to benefit from new features, while older applications continue to work on the former.

  http://social.technet.Microsoft.com/forums/Windows/en-us/cc0740eb-B06A-41a6-98e6-088529bf1f10/what-does-operating-system-context-mean?Forum=w8itprogeneral

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/dd371711.aspx

• during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

  during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

  I just had to go to the directory "Win Support files" and open the implementation file. Now it's working.