ATG normal application - server of Lock ATG

Similar Questions

• Why the configuration application server is locked?

  Why configure the Web app server is locked? ... Why not click on to open it...

  Hi aqeelfarooq96,

  Make sure the system Web server OR runs in your Windows Services.

  ' Control panel' administrative tools ' Services

  If the Web server of the system NOR work then you will not be able to configure the Web application server.

• Application server configuration

  I'm putting in place the ATG app on my machine.

  I have installation 11.1 ATG with app server Weblogic 12.1.3.0. While the implementation of ICD I am error ' invalid Weblogic version: 12.1.3.0.0 taken in charge: [12.1.2] '

  Document is saying something like:

  When you install an application server, you can install a supported version and a version that is not supported by permit. Application server configurations are found at /atg/cim/productconfig/
appserver/SupportedApplicationServer.properties .
  

  [ Oracle ATG trade Web - Application Server Configuration]

  But I am not able to find the file of property mentioned in the record of the ATG.

  Could someone help me solve this problem?

  Thanking in anticipation.

  Hello

  The property file can be found in: CIM\lib\classes.jar\atg\cim\productconfig\appserver

  Please find the reference document for more information below and understand the best, hope that helps you.

  Problem installing Oracle trade 11.1 on Weblogic 12.1.3 (Doc ID 1922316.1)

  Please select a correct answer if this answer solves your problem.

  Thank you & best regards

  Suman Vernoux

• Web application server - how to change the Port

  When installing LabVIEW, OR adds a process called "Application Web Server" (among a long list of other items) at startup.  It became an issue for our Windows users want to run our real application of Web server on their local computer.  My temporary work was about just disable the Web Application Server in the trunk to the port (8080) are available for other items.  My questions are the following:

  First of all, what kind of impact I look at developing LabVIEW programs?  This process is necessary if I want to work on the network applications?

  Second, it is possible to change the port number of the Web app server to avoid any problems that may exist?

  The Web Application Server is used by LabVIEW Web Services - only if you are not using/writing/developing LabVIEW Web Services, then it will not affect you.

  To change the port, open the Web-based Configuration utility NOR (normally on something like http://localhost:3582 /) and under "Web Server Configuration", you should see "Application Web Server" and you can select which port should be used.

  You can also access it Max by right click on "My System" and selecting "Web Configuration.

• LabView 2013 or 2014 Web Application Server does not start.

  I have a request that I built in 2013 of LabView that uses the Web application server OR. The application worked until end November 2014 when the Web in LabView 2013 application server has stopped working. Specifically, 2 and 1) NI NI Application Server Web services) Web Server system both were running, but I was unable to access web pages that I created earlier, or I could access the Configuration Web page OR localhost:3582. In addition, the button "Configure Web Application Server" under "Options/Web Server" is gray. Makes me think that web services NOR did not start successfully upward. Complete a repair facility OR to the LabView 2013 install did not help either.

  Since the opening of a service ticket with NEITHER, I've now deleted and reinstalled the 2013 LabView and LabView 2014 each with the latest patches. But the problem persists.

  The ticket OR for that matter now rests with RnD, so I'm tender hand to the community OR to see if anyone sees something similar? Or has any ideas to try?

  Some additional notes:

  (1) contrary to LabView LabView 2013 2014 no web services NOR would begin, based on a new for 2014 dependence on the Authentication Service of NOR. In 2014 this service does not either.

  (2) when I uninstall 2014 and re-install 2013, chess happens again (as above).

  (3) my system runs Win 7 Pro x 64 with 8 GB of RAM.

  (4) I have McAfee virus scanner/firewall. I have disabled and even uninstalled without correcting the problems.

  At this point any ideas to try would be greatly appreciated, because I can't wipe my OS and start over.

  Thank you

  * Update *.

  I finally found a solution to this problem. The solution is the following:

  1. Delete the two files "C:\ProgramData\National Instruments\NIAuth"
     • commitmark.1
     • Registry.bin
  2. Restart the OS and re-launching of LabView.

  On the next reboot, LabView recreates these two files and the Web services OR Windows services start normally. Once NI WebService which works normally.

  I'm assuming that one or both of these files has become corrupted at some point, that has kept the WebServices OR start properly. But as none of the services OR created an error event Windows for that matter, I stayed to search for the solution. And since the installer NOR has not remove or repair any of these files, the question continues to no matter how many times I have re-installed LabView on my system.

• webutil read file function finds the file on the application server

  Hello

  I want to select and read a file (possibly .pdf) and save it to the database.

  To achieve this, I:

  1) created a table, deltia (key primary aa, varchar2, blob, other columns... image_blob, filename)

  (2) created a block form of database based on the deltia table. The element of the "image_blob" column type is image

  and the image format is "tiff".

  (3) wrote the following piece of code to perform the selection of local file (successfully)

  Select the FUNCTION (i_FileFiltre IN Varchar2 default vDefFileExt)

  RETURN VARCHAR2

  IS

  vPath Varchar2 (128);

  vFileName Varchar2 (256);

  vFileFiltre Varchar2 (200): = i_FileFiltre;

  Begin

  vPath: = CLIENT_WIN_API_ENVIRONMENT. Get_Temp_Directory;

  vFileName: = WEBUTIL_FILE. FILE_OPEN_DIALOG

  (

  vPath,

  '',

  vFileFiltre,

  "Select the file to download.

  ) ;

  Return vFileName;

  END selection;

  The form above function call is:

  Declare

  vFileName Varchar2 (200);

  Begin

  vFileName: = PKG_File_Ops.Selection;

  If vFileName is not null then

  : eq_deltia_metakinhshs. Filename: = vFileName;

  End if;

  End;

  (4) wrote the piece of code to the game/place the file selected in the form element "image_blob", as following:

  client_image.read_image_file (: eq_deltia_metakinhshs.filename,)

  substr (: eq_deltia_metakinhshs.filename, instr (: eq_deltia_metakinhshs.filename,-1)).

  "eq_deltia_metakinhshs.deltio_image");

  The call to the packaged procedure client_image.read_image_file does not work. It returns error

  "47109 - cannot locate the/u01/oracle/temp /... image file"

  In other words, the system will search to read the selected file locally on the server App.

  What can be the cause of this?

  With regard to the content of the webutil.cfg of the App Server. :

  # ---------------------------------------------------------------------------

  # webutil.cfg - WebUtil default configuration file

  # ---------------------------------------------------------------------------

  # This file contains all the configuration settings for webutil. These are some

  # divided according to the following sections:

  # 1. Logging options

  # 2. Installation options

  # 3. Upload a file and download Options

  # 1. Logging options side server for recording the log messages and errors

  # You must set logging.enabled to true to allow registration of mid-range. Without this

  logging of mid-range # will not be any PL/SQL or URL options

  # are provided to turn it on. Once recording is activated the other settings are

  # in-game.

  #

  # Details

  # -------

  # logging.file: sets the file name and location of the log file.

  # Note that WebUtil does no management of the log file. You can

  # need to manually clean this file at any time.

  # logging.enabled: can be TRUE or FALSE

  # logging.errorsonly: can be TRUE or FALSE. Parameter True will ensure that

  # only errors and the normal information log messages

  # are written to the log file. It would be for the use of the product,

  # normally be set to TRUE

  # logging.connections: can be TRUE or FALSE. Setting to true causes each

  connection from a client using WebUtil for write in #.

  # the log that it puts in place.

  Logging.file =

  Logging.Enabled = False

  Logging.ErrorsOnly = false

  Logging.Connections = false

  # 2. Installation options

  # WebUtil needs to download files on the client to perform

  # some operations such as OLE integration or access to the registry. These files

  # are downloaded on the client when webutil is run for the first time.

  # Subsequent executions will use the dll in the cache. Define the location of the

  # These files on the server and the location on the client.

  #

  # Here's a chart that shows numeric constants and their meanings. They

  # are used in configurations of installation options. These constants are defined

  # in WEBUTIL_CORE package spec. Note that the Processor Architecture of the Client operating system

  # is generally the architecture of the JAVA virtual machine that runs on the client,

  # not necessarily even the real client architecture of BONE.

  #

  # < Os - > Client OS family < arch - > processor for the Client operating system Architecture

  # 0-0 - 32-bit Windows

  # 1 Linux 1-64-bit architecture

  # 2 SOLARIS

  # 3 HP

  # 4 AIX

  # 5 mac

  # 9 unknown

  #

  # < Package > - package name

  # 7 WEBUTIL_OLE2

  # 9 WEBUTIL_C_API

  # We do not yet have downloads for other packages. If you need, refer

  # Spec package WEBUTIL_CORE for constants of other packages

  #

  # Details

  # -------

  # NOTE: For all < arch > parameters field is optional. Without this field, the

  # setting will apply to the client 32-bit and 64-bit OS (FMV)

  architectures of #.

  #

  # install.syslib.location. < os >. < arch >:

  # The virtual path of the directory containing the webutil library files the

  server-side of #. This must be an absolute URL or a relative URL

  # for the documentbase.

  # NOTE: < os > field is optional for this parameter. In the absence of a framework

  # which has the client OS and ARCH, it will use

  # install.syslib.location. < arch > cannot be specified if < os > is omitted.

  #

  # install.syslib.location.client. < os >. < arch >:

  # The path to the directory on the client machine where the webutil library

  # files will be downloaded. This must be an absolute path or a path

  # which is the profile of the client user or at HOME. Directory will be created

  # If necessary as well as other parent directories. If the path is

  # do not set, it will be treated as a special case where the libraries will be

  # downloaded to the client JRE\bin (windows) or JRE/lib (unix). If this

  # Directory is changed, all libraries will be redownloaded again.

  #

  # Please keep in mind that other forms server may also have a similar

  the location of # and so libraries could be overwritten even when

  # client running webutil server of different forms. It is therefore

  # advised that the location has a subdirectory that may be unique to your

  # Server, such as the name of the host server. You could use $(SERVERHOST) in the

  # location. This string will be replaced with the actual hostname of the server

  #

  # install.syslib. < os >. < arch >. < package >. < n >:

  # The names of the libraries required for the particular webutil beans. The

  # format of it's name. size | version | showDownloadDialog. Several libraries

  # can be downloaded per package. But make sure the values < n >

  # row and start at 1 for a given operating system, arch and package together.

  install.syslib.Location=/webutil

  install.syslib.Location.0.0=/webutil/Win32

  install.syslib.Location.0.1=/webutil/Win64

  # Add/Edit the following if you want to specify a different location client

  # where syslib libraries.

  # Format:

  # install.syslib.location.client. < os >. < arch > = < location >

  \win32 install.syslib.Location.client.0.0=webutil\syslib\$ (SERVERHOST)

  \win64 install.syslib.Location.client.0.1=webutil\syslib\$ (SERVERHOST)

  # Change the size and the version if necessary, such as when the upgrade of the library.

  # Normally this is not necessary since most of these libraries are equipped

  # settle. Jacob does not however come with installation

  # Format:

  # install.syslib. < os >. < arch >. < package >. < n > = name | size | version | showDownloadDialog

  1.14.3 - install.syslib.0.0.7.1 = Jacob - x 86 DLL | 102400 | 1.14.3 | true

  1.14.3 - install.syslib.0.1.7.1 = Jacob - x 64 .dll | 117760 | 1.14.3 | true

  install.syslib.0.0.9.1 = JNIsharedstubs.dll | 45056 | 1.0: true

  install.syslib.0.1.9.1 = JNIsharedstubs.dll | 58368 | 1.0: true

  install.syslib.0.0.9.2 = d2kwut60.dll | 81920 | 1.0: true

  install.syslib.0.1.9.2 = d2kwut60.dll | 102400 | 1.0: true

  # You can also add your own libraries here, for example

  #install.syslib.0.0.user.1 = testwebutil.dll | 204872 | 1.0: true

  #install.syslib.0.0.user.1 = ffisamp.dll | 40960 | 1.0: true

  #install.syslib.0.1.user.1 = ffisamp.dll | 35328 | 1.0: true

  # 3. Download / upload options

  # For file upload and download options, you can set the default locations

  # on the server that webutil can use as a work space. Optionally, you can pass

  off # upload and download

  #

  # Details

  # -------

  # transfer.database.enabled: can be TRUE or FALSE - allows you to activate or

  # disable upload and download of data

  #                                server.

  # transfer.appsrv.enabled: can be TRUE or FALSE - allows you to activate or

  # disable the upload and download from the

  application server #.

  # transfer.appsrv.workAreaRoot: the root of the location in which can WebUtil

  # store temporary files uploaded by the client.

  # If no location is specified, application server

  # user_home/temp will be assumed.

  # This place is always readable and accessible writable

  # No matter the parameters of

  # transfer.appsrv. * are. This parameter is

  # If you need side customer

  # READ/WRITE_IMAGE_FILE procedures.

  # transfer.appsrv.accessControl:Can be TRUE or FALSE - allows you to specify

  # that loads and downloads can occur

  # the directories named in the

  # transfer.appsrv.read.n and

  entries transfer.appsrv.write.n # and their

  subdirectories #. If this parameter is set to FALSE,

  # transfers can happen anywhere.

  # transfer.appsrv.read. < n >: list of directory names that downloads can read

  #                                from.

  # transfer.appsrv.write. < n >: list of directory names that mail can write

  #                                to.

  #NOTE: by default, the file transfer is disabled by security measure

  Transfer.Database.Enabled = True

  Transfer.appsrv.Enabled = True

  transfer.appsrv.workAreaRoot =

  transfer.appsrv.accessControl = FALSE

  #List transfer.appsrv.read. < n > directories

  Transfer.appsrv.Read.1=c:\temp

  #List transfer.appsrv.write. < n > directories

  Transfer.appsrv.Write.1=c:\temp

  # 4. Others

  # Details

  # -------

  # BlockAllowHeartBeat: Continue the heart beat communication with the

  # Server when set to TRUE. By default, the value is

  # the value False. If set to False, there is no heart

  # fight mode blocking communication.

  BlockAllowHeartBeat = False

  Notes:

  The database version is 11g v.2

  Forms services version is 11g v.2

  The webutil has been installed and configured (I have done a project that requires reading a

  saved locally excel file - using webutil_ole2.)

  I didn't notice an error in the Java console.

  Thank you

  SIM

  This error indicates that your server is a unix platform: 47109-cannot locate image file/u01/oracle/temp /

  
  

  If it is correct, then your webutil.cfg is not been set correctly.  Entries for transfer.appsrv are in reference to the appsrv and not the client.  So you currently C:\temp which is a directory of Windows and not Unix.

  (2) Transfer.appsrv.Read.1 =c:\temp. It is already set.
  

  3) Transfer.appsrv.Write.1=c:\temp. It is already set.

• Cannot start Coldfusion 9 Application Server Service

  Note that this is a Dev server.  Not vital, but super boring.  I found that my machine has been restarted due to Lumension.  It's normal.  However, given that I imported a file .because the old CF8 server directly to this Dev CF9 Server I had not restarted or restared the CF9 service.

  I found these error messages in the event viewer:

  The ColdFusion 9 application server service could not be started.  Check the log files from the server 'coldfusion' for more information.

  and

  The ColdFusion 9 application server service stopped with the error special service that the system cannot find the specified file...

  I checked the JRUN logs and can not find all the papers relating to correspondence timestamp of today or anything out of place, which seems to be the cause.  Nothing in the CF be newspapers, mainly because CF never rose from the status running if no newspaper could be generated.

  I thought I found the culprit in this post http://www.houseoffusion.com/groups/cf-talk/thread.cfm/ThreadId:61223 ... but the fix is without effect.  I can't find anything in my search using grep outside the JRUN temp folder a single .xml file with a path of Coldfusion8 not valid.  The path of attachment or remove the offending temporary files does not solve the problem.

  I also tried to move all files from the root that was moved in the directory / / ColdFusion9/wwwwroot/out and you try to start the service, but the same error and failure occurs.

  I have not tried to reinstall.  I installed the CF9.0.1 update and it work just dandy wait this restart.  There are no other experienced computer problems that I can tell, and no other errors were found in the event viewer.

  Thank you!  I now have an error that I can hunt and diagnose if all goes well.

  "Error: no known VMs."  (Check for corrupted jvm.cfg file) "has been exposed error.

  With a little big of the Goog I'm done with a solution of another CF user experience the same joy: http://forums.adobe.com/thread/795168

  Found the problem because I suspected an incorrect path.  It's the java.home variable that was incorrect.  Java.Home =: / ColdFusion9/execution/jre, I changed to java.home=C:/ColdFusion9/runtime/jre and he has pulled up very well.  Solved!

• Application server and webutil.

  Hi all
  
  I installed 10g R2 sever Application successfully, but when I went to set up the
  webutil so I have not found the webutil folder and I'm surprised how would it?
  Because as a 10 g R2 the webutil is already installed.
  can someone tell me what will be the reason?

  Hi Daniel,.

  AS 10g R2, has no webutil by default, we set it up outside... Please give me your mail address.will send you the file... its just 2 MB of the file and then just follow the 10 steps below...

  1. create the directory webutil in ORACLE_HOME/forms

  2. transfer in binary mode, the following files in the directory
  $ORACLE_HOME/forms/webutil

  d2kwut60.dll

  Jacob.dll

  JNIsharedstubs.dll

  3. the following alias has been created in the ORACLE_HOME/forms/server/forms.conf file:

  AliasMatch ^ / forms/webutil / (. *) "ORACLCE_HOME/forms/webutil / $1.

  4. the file webutil.cfg has been created in the ORACLE_HOME/Forms/Server and it is
  resembling:

  Logging.file =

  Logging.Enabled = False

  Logging.ErrorsOnly = false

  Logging.Connections = false

  install.syslib.Location=/webutil

  install.syslib.0.7.1 = Jacob.dll | 94208 | 1.0: true

  install.syslib.0.9.1 = JNIsharedstubs.dll | 65582 | 1.0: true

  install.syslib.0.9.2 = d2kwut60.dll | 192512 | 1.0: true

  5 copy/sign the files in the following ORACLE_HOME/forms/java jar directory:

  Jacob.jar, frmwebutil.jar

  6. If you already have a pattern in your RDBMS which contains the stored WebUtil
  code,

  You can skip this step. If not take a look on note: 333385.1
  step 4

  7. copy from webutil_106\java to ORACLE_HOME/forms/java the following two
  JavaScript files:

  forms_base_ie.js

  forms_ie.js

  8. transfer in binary mode, the following files:

  webutil.olb

  webutil. PLL

  WU_TEST_106.FMB

  in the ORACLE_HOME/forms directory

  9 transfer the following files:

  webutilbase.htm

  webutiljini.htm

  webutiljpi.htm

  in the ORACLE_HOME/Forms/Server directory

  10. in formsweb.cfg create the following configuration section

  [webutil]

  WebUtilArchive = frmwebutil.jar, jacob.jar

  WebUtilLogging = off

  WebUtilLoggingDetail = normal

  WebUtilErrorMode = alert

  WebUtilDispatchMonitorInterval = 5

  WebUtilTrustInternal = true

  WebUtilMaxTransferSize = 16384

  baseHTMLjinitiator = webutiljini.htm

  baseHTMLjpi = webutiljpi.htm

  baseHTML = webutilbase.htm

  archive_jini = frmall_jinit.jar

  Archive = frmall.jar

  lookAndFeel = generic

  10 bounce the OC4J_BI_Forms container on the middle tier of the application server

  Concerning
  Fabian

• How to install Oracle policy Automation in Oracle Application Server?

  We plan to use OPA with Oracle Ebusiness Suite release 12.1. We run the application Oracle 11 g server. We want to deploy the components Oracle policy Automation to the same server to Oracle Ebusiness suite applications.
  
  (a) how to install the engine of determinations of Oracle, Oracle Server of determinations on Oracle Application Server and Oracle Web determinations? The document setup for OPA is not for Oracle Application Server.
  (b) what is the best deploy the OPA in separate server or in the same Oracle Ebusiness Suite server?
  (c) how to decide whether to use Java APIs using Engine determination or web services using determination server or UI Web determinations for our project? Or what factors should be considered?
  
  
  Thanks for the help.
  
  -Sreeram.H

  (a) you must install the files of war for determination of Oracle server and Oracle Web determinations according to the normal deployment of war - there is no special action required, this is why it does not appear explicitly. There is no reason to deploy Oracle engine determinations itself to a web application server.

  (b) "better" tends to be more a subjective point of view, but if you already deploy all your web services on the same server as Oracle E-Business Suite, then you should go the same for the OPA. Same story for deployment on a separate server.

  (c) cannot answer without knowing why you're using OPA! If you are looking to integrate with Oracle E-Business Suite Oracle Server determinations would be the wise choice. Determinations of Web is very useful if you want a smart way to collect or examine relevant evaluation data for decisions, as well as the scenarios of "self service". Engine determinations should be used if you have a scenario of integration completely on measure that can use web services or web - applications, but I can't imagine a scenario where it would be logical if you are using Oracle E-Business Suite.

  Of course, these are just my point of view - others may feel more strongly one way or the other!

• How to deploy the business on Oracle Application Server rule

  OPA dear team,
  
  
  We have a requirement in which we integrate the OPA with BPEL. We must define the rules of modeling tool Oracle policy and deploy it in Oracle Application Server.We will then that wsdl and call the rule of BPEL partner links engine. By default the Oracle Policy modeling tool deploys for tomcat. Ask your input about how we can deploy on oracle application server.
  
  Thank you
  Anand

  bwolff wrote:

  So my question is how to deploy a rulebase.zip a determination server that runs on Oracle Weblogic Server 11g?

  Thank you
  Brian

  Normally, an application server will expand the war for the web application file works from the expanded location. When this is the case, you can deploy a new one simply by copying the module zip file in the directory WEB-INF/classes/rulebases .

  However, Weblogic is not extend the web application, there is no directory to copy the file zip of modules on.

  It is possible to run the determinations under weblogic server so that you can deploy a new modules without restarting the server of determinations. There are two technqiues to achieve this.

  1. you can manually unzip the .war file somewhere that the weblogic server can see locally and then deploy the .war file expanded as the determinations server web app. If you do that you can deploy a new modules by copying the zip file in the directory WEB-INF/classes/rulebases to this place.

  2. it is possible to specify a rulebases directory that is not in the web application. In this case, it should be a place the web application can be done locally. You can deploy a new modules by copying the rulebase.zip file to the location specified modules.

  You specify a different directory to search rulebases by setting a java system property: determinations.server.rulebase.dir.

  Example of

  -Ddeterminations.server.rulebase.dir=/some/other/dir/rulebases
  

• License for SOA Suite 11 g includes the application server

  I'm searching through the information about the version 11 g SOA and it does not include a license to the WebLogic Server. Can anyone confirm that I need to allow the appropriate WebLogic 11 g of basis to perform SOA Suite 11 g on separately. I wish I could find a definitive statement about this on the website of Oracle or in the documentation.

  I really disagree with you be here.

  There are two ways to buy SOA Suite according to http://www.oracle.com/corporate/pricing/technology-price-list.pdf

  A case for non-oracle middleware (essentially Websphere or JBoss now since weblogic's oracle)

  One option for the Weblogic Suite. You can't buy SOA Suite standalone, you must buy it with Weblogic Suite.

  Finally, what you say is not necessarily true about the upgrade. Yes, updates are normally included in the support budget, but more current owners of SOA Suite purchased by the Internet Application Server EE (OC4J). Running to 11g on OC4J is not an option, then they will have to migrate licenses of Weblogic Suite, which are more expensive. If you have purchased SOA 10 g recently with Weblogic Suite, you can freely move to 11g.

• Application server: duplicate entries for the same machine in the screen "select a Mac".

  The application Sever on one of my computers has several duplicate entries in the initial screen "choose a Mac" that appears just after the launch of the application server where you choose the particular Mac which you want to connect.

  My server is in the local IP 10.0.0.5, but there are two entries for it in the list for a reason any, as you can see here:

  

  I can choose is entered to connect without a problem. They seem to be legitimate duplicates. So I would like to remove one of them.

  Does anyone know where these entries are stored in the file system, or how to remove one of them in the list?

  You can manually edit the plist, or simply remove to rebuild the entire list:

  ~/Library/preferences/com. Apple.Server.v4.plist

• I can not give the password in the Terminal application show the lock icon?

  I can not give the password in the Terminal application show the lock icon? How to Slove this isso please help me? does not accept the password.

  See screenshot below

  

  Thank you

  You see the key icon is an icon of password to remind you that the password that you type do not appear to echo.

  Try to enter your password and press return on the keyboard.

• Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello

  You can enable the detection of wrist as well as an access code and unlock it with the iPhone:

  • On your iPhone, in the application of the watch, go to: My Watch (low left tab) > General > wrist Detection - this turns on.
  • On your iPhone, in the application of the watch, go to: Watch My > Passcode > Passcode turn on (choose a Simple 4 digit access code or a longer).
    • Also in the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually or unlock your iPhone. Then, it will remain unlocked until you delete the monitoring of your wrist, when that it locks automatically.

  You can also set your watch to the screen to reactivate automatically when you lift your wrist, even select what is displayed on the screen to wake up:

  • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
    • Active screen Wake on revival of wrist, and;
    • Choose if the watch should resume last activity or see the Face of the watch.

• Why is-Web application server on a target at a distance in real time is not start?

  Hi, I need help urgent please

  I was wondering why the Web application server on a target at a distance in real time is not start?

  The target is 9014 real-time and its connected to a local network abroad, I have a public IP address port forwarded to the local IP address of the device (Network Address Translation) with all open TCP/UDP ports. I can log on remotely over the internet using the public IP address to the device configuration page and change many settings. Whenever I have activate the Server Web applications and made port 8080, worth defaults to 0 after the reboot of the target.

  The admin login I use has all permissions to control the unit.

  For this reason, I have a problem, deploy web services remotely through the project after building it as it happens with the following error.

  "Web Services deployment failed. You must start the application Web server OR before you deploy a web service.

   

  I have attached a few screenshots

   

  Thanks for the help

  I had someone to plug his laptop to the same network as the cRIO, logmein used to connect remotely to the laptop, I had to download labview and the software needed for the cRIO in the computer, and then with the help of MAX, I reinstalled the software on the cRIO. The port of the web server application 8080 is now activated and I was able to deploy services web ok.

  I wonder why I can't use MAX distance to reinstall the software on the cRIO.

  The cRIO is installed on a private overseas network (192.x.x.x), then I have a public internet IP address (67.x.x.x) mapped to the private IP address of the cRIO (Network Address Translation). I can connect to the cRIO config page using the address 67.x.x.x, but not via MAX

  If I find target real tiem using the Ip address of 67.x.x.x, sometimes with the private static IP (192.x.x.x) located on the cRIO but it shows disconnected status

  I wonder if someone has an idea how to go about using MAX to reach the target in real time on the internet

  Thank you