Why the configuration application server is locked?
Why configure the Web app server is locked? ... Why not click on to open it...
Hi aqeelfarooq96,
Make sure the system Web server OR runs in your Windows Services.
' Control panel' administrative tools ' Services
If the Web server of the system NOR work then you will not be able to configure the Web application server.
Tags: NI Software
Similar Questions
-
Why is-Web application server on a target at a distance in real time is not start?
Hi, I need help urgent please
I was wondering why the Web application server on a target at a distance in real time is not start?
The target is 9014 real-time and its connected to a local network abroad, I have a public IP address port forwarded to the local IP address of the device (Network Address Translation) with all open TCP/UDP ports. I can log on remotely over the internet using the public IP address to the device configuration page and change many settings. Whenever I have activate the Server Web applications and made port 8080, worth defaults to 0 after the reboot of the target.
The admin login I use has all permissions to control the unit.
For this reason, I have a problem, deploy web services remotely through the project after building it as it happens with the following error.
"Web Services deployment failed. You must start the application Web server OR before you deploy a web service.
I have attached a few screenshots
Thanks for the help
I had someone to plug his laptop to the same network as the cRIO, logmein used to connect remotely to the laptop, I had to download labview and the software needed for the cRIO in the computer, and then with the help of MAX, I reinstalled the software on the cRIO. The port of the web server application 8080 is now activated and I was able to deploy services web ok.
I wonder why I can't use MAX distance to reinstall the software on the cRIO.
The cRIO is installed on a private overseas network (192.x.x.x), then I have a public internet IP address (67.x.x.x) mapped to the private IP address of the cRIO (Network Address Translation). I can connect to the cRIO config page using the address 67.x.x.x, but not via MAX
If I find target real tiem using the Ip address of 67.x.x.x, sometimes with the private static IP (192.x.x.x) located on the cRIO but it shows disconnected status
I wonder if someone has an idea how to go about using MAX to reach the target in real time on the internet
Thank you
-
Apex can work without the oracle application server? How?
My question is exactly what the title says.
Apex can work without the Oracle application server?
I heard that there need a webserver to work but not necessarily the oracle application server.
Is this true?
With ONLY apache installed apex can work on it?
Thank you
Don't forget to assign points to those who help you! (Mark the thread useful/correct)
My home page
Best regards
Published by: Igor Carrasco on May 29, 2009 14:59
Published by: Igor Carrasco on May 29, 2009 14:59Hello
Take a look at the Setup Guide that covers all the different options you have (as there are a some variations).
http://download.Oracle.com/docs/CD/E14373_01/install.32/e13366/TOC.htm
But yes, in short, you can have a configuration where there is no external Web server that uses the embedded PL/SQL gateway.
Hope this helps,
John.
--------------------------------------------
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone! -
Newbie question for the Oracle application server
Hi Master,
a DBA I am interesting to broaden my skill with learning on the application server.
I knew that in the past before Weblogic bought by Oracle, Oracle, always using Oracle application server.
Now with the Weblogic gaining more popularity on the market, which is the product the value of learning and get certified.
Is it still useful to take Application Server 10 g or go with Weblogic. in certification path, Weblogic 10 g.
WebLogic now replaces the Oracle application server, average abandoned Oracle Application Server?
Please enlighten me and thank you for your help
LieQuestion if I go for Oracle WebLogic Server 10 g Administrator Certified Expert System it will be good to work with 11g thus?
Make it part of the same system (now). Like WebLogic is the portal and the Jukebox, forms etc. are the records.
What book other than the documentation that you have found the right one for learning.
Yet to find one, Oracle documentation was OK.
Is it better to learn the Linux or Windows version?
Both are very well, choose the operating system you know better.
Best regards
mseberg
I built my Middleware on Linux 64-bit test. Note that the 32-bit version allows to run Forms and Reports Developer.
Beware of pre-installation tasks
Install the Oracle database
Linux RCU (repository creation utility)Database
Use an existing database. (And it worked)
My test was divided into four main parts: (in this order)
Installation of the regional coordination unit
WebLogic Server Install
Install JRocket
Forms and reports InstallAccording to me, it took me two or three times to do things. (or at least work)
I found myself with these URLs in the end:
Administration Server Console http://Host/console 7001
Enterprise Manager Console http://Host/em 7002
Enterprise Manager Agent http://Host/emd/main
Oracle Forms http://Host/formes/frmservlet 9001
Oracle reports http://Host/rapports/rwservlet 9002So far, I have only an addition to my Web Page:
http://www.Visi.com/~mseberg/compile_forms_on_wl.html
As always this work orders:
./opmnctl status
I was able to add PHP after you apply the hotfix 9292625.
Note of Oracle that I found useful
854117.1
Published by: mseberg on May 20, 2011 14:16
-
Deploy a war in the Oracle application server
Hello
We have a few Oracle discoverer running on the oracle application server and I would like to deploy a war to the service file.
Can someone tell me if its possible to do?
Should I just drop the war in the deployment of the server folder?
Thank you
KKWrong forum.
Move the thread (close and re-post) to each of discoverer
or somewhere in http://forums.oracle.com/forums/category.jspa?categoryID=193 (probably Oracle ACE - general forum). -
Send requests to page .html to the ColdFusion application server
The way I understand it, web browsers send all their page requests on the web server, which in turn identifies which pages must be processed by an application server (e.g., CFM, ASP, etc.) and sends the request to the appropriate application server. The server application then processes the request and returns HTML (usually) and the web server then presents to the client. Is it possible to change a parameter to .html or .htm files are send to coldfusion for processing in addition to .cfml (in Microsoft IIS)? If so, does anyone know of a section of howto out there? Just curious.
Just found this article on the use of ISAPI rewrite to accomplish a number of wonderful transformations. Mainly:
http://host/somepage.html -> http://host/somepage.cfm
and
http://host/somepage/varvalue -> http://host/somepage.cfm?var1=varvalue
http://www.bpurcell.org/blog/index.cfm?mode=entry&entry=1070
-
How to run 2 different applications of the same Application Server
Hello
I would like to know how to run two different applications of the same Application Server with different databases?
We use
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
Oracle Application Server 10g 10.1.2.0.2
Kind regards
HassanYou can have as much as you want, just your applications should have different names or URLs and point to a specific database (using data sources).
Greetings.
-
ATG normal application - server of Lock ATG
Hi all
I created a normal ATG application using eclipse. Now, I'll create a lock for this application server.
How can I do that using eclipse. and how do I create my atg points to lock server if application?
Please help me.
Thank you
Kushal.You just create ClientLockManager and ServerLockManager.
Create it from eclipse or directly into the directory/atg/dynamo/service /.Set the following properties in this directory
ClientLockManager.properties
lockServerAddress = your hostname
lockServerPort = 9010
useLockServer = trueClientLockManager_production.properties
lockServerAddress = name of host youe
lockServerPort = 9010
useLockServer = trueServerLockManager.properties
port = 9010The above configuration will be good if you use a production only server.
For any other server instance, you got to do the same ways.
But it will be good if you create these properties by running CIM.
Thank you
-
Install PeopleTools 8,53 Linux question: configure application server using psadmin
People,
Hello. I install PeopleTools 8,53 Internet Architecture. Server database is the database Oracle 11 GR 1 material. Operating system is Oracle Linux 5. I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5. I've implemented PeopleTools 8,53 Instance of database in Oracle Database Server successfully. Data Mover connection and application designer in the Instance of database successfully. Web Server has been successfully configured.
Now I face the question about the configuration of application server as below:
In Windows, I run /PT8.53/appserv/psadmin.exe to create a domain for the Instance of PeopleTools database successfully. On Linux, the file /PT8.53/appserv/psadmin light blue color but is not executable, I try to run it in the following way:
[user@userlinux appserv] $. / psadmin
His output:. / psadmin: error while loading shared libraries: libtrio64.so: cannot open shared object file: no such file or directory
My question is:Can any folk tell me how to configure the application server using Linux for Architecture Internet PeopleTools psadmin? How to solve the problem above?
Thank you.> GenMessageBox(200, 0, M): PS General SQL Routines: version SQL library libpsora64 missing or invalid (200.0)
What is your platform/wordsize? What is your version of client db/wordsize? All must be 64-bit Linux.
Nicolas.
-
The 10g application server installation
Hello
I have Windows 2003 is installed on a virtual machine, I also have Oracle Database 10g release 2 (10.2.0.1.0) installed and configured, I need to install Oracle Application server release 2 (10.1.2) to the same server, is this applicaple?
Also although the application server will install a database, this database will use the same port 1521. is it possible to change the port. I tried that to change the listner.ora, but it does not work for me.
Thank you for helping me.It is possible, in the DB change listener.ora the listener from 1521 to 1522. And when you start the installation of the OAS 10.1.2 consider using another Oracle Home thus Instance name so you don'r something rewrite by misstake.
greetings.
-
Why the network location is always locked?
I use locations 'House' and 'work '. I never put on automatic because the well, that simply never works.
Why should I enter my password every time I want to change the location? I never lock back, let always unlocked. I have no restart or logout to make that happen, close preferences and open it again. It is locked again.
Does not have this problem in Yosemite on this MBA; not I have it on Yosemite on my mini... What is the problem with El Capitan?
In the security & privacy preferences window, please open settings, then click on the Advanced button and uncheck the box marked
Need administrator password to access the lock settings
-
Why the store of data/LUN locked automatically
Some of the virtual machine are not accessible, and some are very slow, after investigating everything that it's a matter of SAN data store is locked so LUN Reset to cancel the lock to a SAN / LUN
Problem is resolved after rest LUN.
Now, I want to know why the locked automatically store data/LUN
You can check if a host is isolated recently network - HA sometimes continually tries poweron VMs elsewhere and locks prevents it - other causes is a year very busy Bay SAN not finding time CPU to release locks... vmkernel hosts should help... Also look for VC events for the isolation of the host
-
Cannot connect the WebLogic application server
I am trying to install the WebLogic application between jDeveloper (11.1.1.4) server. When I created a new connection, I get under result.
JSR-160 LENGTH tests... failed.
Cannot establish the connection.
JSR-160 DomainRuntime... skipped tests.
JSR - 88... skipped tests.
JSR-88-LOCAL... skipped tests.
JNDI... skipped tests.
JSR-160 tests edit... skipped.
Tests of HTTP... success.
Test server MBeans model... skipped.
Test HTTP authentication... success.
2 of the 9 successful tests.
I'm going through "Build your first process with Oracle BPM 11g" and I'm at the end of the stage, deployment. However due to the connection problem, Kingdom LOV has nothing in the search for identification Remote_WLServer. Users of demonstration have been deployed and created. All servers are running. No idea what could be wrong?Check this post for more information - http://fusionstack.blogspot.com/2010/04/ofm-in-cluster-with-http-server.html
-
Changes on request not visible when it is deployed in the weblogic application server
Hi all
I have an ADF faces application that runs on a weblogic server.
Application works fine, but I added a few features on some pages.
I tested it with Jdeveloper and the build in weblogic server, that works very well.
Now, I have deployed my application (trough the menu application-> deploy) to the weblogic server.
When I open the application now, I don't see the changes I made!
In the menu that I did run Build-> Make and Build-> rebuild but this did not help.
What is causing this behavior?
Thank you is advanced.Try first cancel the deployment of the server application, and then deploy it again.
Then, you clear the browsers cache...Timo
-
Save the client application server report
Hello
I want to save the report of apllication server to PC client.
6i report can record in client side by user setting as a parameter destype, destype should be in the file to be saved to the client side and also have the destination parameter. destination is the user to save in the location.
any body knows how to learn what I can save the report to the client to the application server.To transfer the file on the Client, you can use the webutil_file_transfer.as_to_client procedure. For example, see link below.
http://www.orafaq.com/Forum/t/125329/2/-Clément
Maybe you are looking for
-
Tecra A8 - what memory upgrade is the best?
Hi all I have an old model TECRA A8 No.: PTA83E-0GY054G3 and I have recently upgraded to windows 7 (32 bit) and OFFICE10. But it is so slow that I am so fed up. I currently have 1 GB of RAM (2 x 512 2Rx16). Could someone tell me which is the best plu
-
Support for driver/card for keyboard PA3705D
I have the PA307-1ET1 wireless keyboard works with my Ubuntu based system XBMC. It works fine except some keys do not work. Is there a mapping file available that I can use with console-setup to make better use of the keyboard. If Yes, where can I ge
-
Why Sony can't organize their BAG pouches on their Web site as this electronics store German?
http://www.Saturn.de/de/shop/Sony-action-cam-Zubehoer.html
-
Fan is still running on the Satellite P300-275. Size fans?
Hi all I just bought a P300-275, which looks like a very good machine. But I have the problem that the fan always works, even when I only surf the web or even when the computer is idle. And this fan is quite loud. So I tried the following:-J' install
-
Satellite P200 - 14 H: I'm looking for the ICC profile
Hello! I'm looking for the profile for my Toshiba P200 - 14 H. It is very important for me.Thanks for any help.Concerning