Attachment of requisition class

Similar Questions

• Need help with an additive attached to my class

  Hello

  I'm a bit new to Captivate. I have a problem and do not know which way to go or even if it is feasible.

  I created a course for medical personnel. A number of different types of employees taking the same course - RNs, therapists, social workers and so on.

  Asked me to add an addendum that will have only a discipline (OT). It's a few slides of information and 3 additional questions.

  What I'm trying to do, is when the user enters their medical discipline I use these data to direct them to the additive as appropriate.

  My problem is that I can't know if I should use questions branch up-to-date (I can't seem to get to work properly no matter how I do it), make a Multi-SCORM package with the additive as a second module that only some people will take or use the aggregator (which I have practically excluded because I think that I can't have it report to my LMS.)

  I use WIN 7, Captivate 7 and my LMS is the cornerstone. For example, we use only SCORM 1.2.

  I tried to quiz branch informed several ways but I get NaN results.

  I'm currently trying so he can work in Multi-SCORM with the user to take the first test, passing it, then if the user needs to the additive, jumping to the second SCO. But I can't do the link between the SCO to work because it is a local link when I put in place (open another project opens C:\User... project2.swf)

  I hope that's not too complicated. I'm a little drowned here.

  Thanks much for any help you can give!

  Pete

  It is after midnight here in Belgium. OK, in this case you should really check management up-to-date as well. The solution that I told you is that the content slides, but if the branch of knowledge is checked, normally 3 question slides last would not take into account for users who do not have the additive. The score slide must be at the end, after all question slides. And the jump to the slide of score must work to add users and show the right amount of questions and the exact score. Must say that I was not at length check in CP7, he worked at the COP6 and 6.1

  I recommend now is to add a text container, for the rest of the project, in which you can follow a few variables system quiz like cpQuizInfoPointsscored, cpInQuizScope (you must stay within the scope of the first question at the last in the addendum).

• Possible to add an existing class as a child of another class?

  Hello

  I need to test a code for features (a PMBus on I2C features on a Board of sup - 20). Ultimately it is a subclass of instrumentation in the higher program, but I did not yet a large part of the overall program. Is it possible to create first class pilot Sub-20 and later attach it in class instrumentation of the program?

  Thank you

  Simon

  Theoretically, Yes, but if the parent class has data items, you obviously won't be able to use them during your development. In addition, any screws that you create in the parent class that are dynamic distribution must be already implemented in the class of the child.

  In other words, you have little to already know what needs to be like the parent class. Why not go ahead and create it? At least a draft, with all data and the screws using the classes your child?

• a clip of loading a class

  Hi all
  
  I am tempted to write an AS 2.0 class with the help of Flash whereby I can load and control several video clips in the library and from external files. I have tried several different ways, do not quite seem to be able to get the images displayed on the screen. After some time to research, I was unable to find a good example online. Please excuse my inexperience with AS classes.
  
  I would like to write a class that extends MovieClip and is used to control several "sub" movieClips, set of methods inside the instantiated class.
  
  .Fla file, I call instantiate my class as follows:
  
  var theScene:sphere3D = new sphere3D();
  
  In the constructor of my class file, I try to join or to load a movie. I just want to appear on the screen, when I test the movie .fla. I tried to use attachMovie and loadMovie with no luck.
  
  dynamic class sphere3D extends MovieClip {}
  function sphere3D() {}
  this.attachMovie("shadow","shadow",1); shadow is a clip in the .fla with binding library
  Shadow._x = 100;
  Shadow._y = 100;
  
  this.createEmptyMovieClip ('shadow2', 100);
  Shadow2._x = 100;
  Shadow2._y = 100;
  Shadow2.loadMovie("images/cube.png");
  }
  }
  
  What I am doing wrong? Suggestions for stuff to test will be welcome.
  
  Thank you
  
  Dana.

  Ah, thank you, that make sense now. The solution you suggested worked very well.

  I also found two other solutions, for all those who may read this. One is essentially to create an empty movieclip on your timeline. In the window of linkage to the empty movieclip, I ensured that I put the class field in the name of the class that I wrote, something I haven't done before. It fits on all the empty movieclip actionscript class code and even automatically runs the constructor when the empty movieclip is placed on the timeline. It also automatically provides a 'reference' to the main timeline when I speak of this.attachMovie () from the inside of the class. Thus, it worked, but is not as elegant as do all of the actionscript (unless you create a component).

  The last mention, that I fell is the Object.registerClass () method used to attach as a class to an object, similar to the use of the method of the link above. But I have not tried with success yet.

  Thanks again for the help kglad,

  Dana.
  _______

  Dana Sheikholeslami
  The Art Institute of California

• Type of legacy objects, dynamic storage safe?

  Hello

  I'm trying to store objects of mixed type inherited from a common base class in a way that preserves the original type.

  I tried with globals functional attributes, with labview globals, all without success. Whenever I read about a stored object, it degrades to the base class.

  A project that should illustrate the behavior is attached.

  -class "device of Base' base with screws on members 'Init', 'Read', 'Write' (intended to serve as an interface)

  -"GPIB", "TCP", "DAQmx" derived classes

  All required start-up designed (according to the test script) are created and stored in the Device Manager. Device Manager is a global functional, containing a Variant that manages a list of 'DeviceId => 'Device Base' object' assignments.

  Storage and playback to and from the job manager, at least until the borders of VI are available. In VI, the correct type of origin (for example "GPIB device") is returned. Outside the VI, the type is cast in the "Base Unit" and the bad member of a dynamic forwarding VI gets called (basic implementation)

  How can I safely dynamically store and read mixed objects from the same base class without losing the concrete type?

  
  

• Auto-completion for PeopleCode 8.54.01 does not

  Hello

  We use the 8.54.01 application designer and AutoComplete for PeopleCode is turned on but it doesn't work. I searched the Web but did not find any relevant help. How to make this work?

  Thank you

  

  Seems to work for me well. But I'm on 8.54.07.

  What you type? For example, when I type % request. the AutoFill option will appear with options for the requisition class.

  In addition, it might be useful to try to clear your cache local app designer under C:\PS\CACHE. Thank you!

• Image file in DB entry does not

  I try to have the user select an image file, and then insert into a db however I get this db error "entity line with null key is not found in NblNhIncsubmission."

  If you see my picture below you can see my code is correctly downloaded the file and update the "Attachment" field, but it throws an error inserting the entire form in the db

  

  Here's the PB I need to insert in (circled is the column I'm inserting the NblNhIncsubmission DB)

  

  Here is my page jspx code:

  <?xml version='1.0' encoding='UTF-8'?>
  <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
            xmlns:f="http://java.sun.com/jsf/core"
            xmlns:h="http://java.sun.com/jsf/html"
            xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
      <af:document id="d1" binding="#{backingBeanScope.backing_Test.d1}">
        <af:messages binding="#{backingBeanScope.backing_Test.m1}" id="m1"/>
        <af:form id="f1" binding="#{backingBeanScope.backing_Test.f1}"
                 usesUpload="true">
          <af:pageTemplate viewId="/oracle/templates/threeColumnTemplate.jspx"
                           id="pt1">
            <f:facet name="center">
              <af:panelFormLayout binding="#{backingBeanScope.backing_Test.pfl1}"
                                  id="pfl1">
                <af:spacer width="10" height="10"
                           binding="#{backingBeanScope.backing_Test.s2}" id="s2"/>
                <af:inputDate value="#{bindings.When.inputValue}" label="WHEN"
                              shortDesc="#{bindings.When.hints.tooltip}"                        
                              id="it6" required="true" showRequired="true"/>
                <af:spacer width="10" height="10"
                           binding="#{backingBeanScope.backing_Test.s1}" id="s1"/>
                <af:selectOneChoice value="#{bindings.Location.inputValue}"
                                    label="LOCATION"
                                    shortDesc="What is your location?"
                                    binding="#{backingBeanScope.backing_Test.soc1}"
                                    id="soc1" showRequired="true" required="true">
                  <f:selectItems value="#{bindings.Location.items}"
                                 binding="#{backingBeanScope.backing_Test.si1}"
                                 id="si1"/>
                </af:selectOneChoice>
                <af:spacer width="10" height="10"
                           binding="#{backingBeanScope.backing_Test.s3}" id="s3"/>
                <af:selectOneChoice value="#{bindings.Category.inputValue}"
                                    label="OBSERVATION TYPE"
                                    shortDesc="Describe the cause of your observation."
                                    binding="#{backingBeanScope.backing_Test.soc2}"
                                    id="soc2" required="true" showRequired="true">
                  <f:selectItems value="#{bindings.Category.items}"
                                 binding="#{backingBeanScope.backing_Test.si2}"
                                 id="si2"/>
                </af:selectOneChoice>
                <af:spacer width="10" height="10"
                           binding="#{backingBeanScope.backing_Test.s4}" id="s4"/>
                <af:inputText value="#{bindings.Details.inputValue}"
                              label="YOUR OBSERVATION"
                              columns="#{bindings.Details.hints.displayWidth}"
                              maximumLength="#{bindings.Details.hints.precision}"
                              shortDesc="#{bindings.Details.hints.tooltip}"
                              binding="#{backingBeanScope.backing_Test.it3}"
                              id="it3" required="true">
                  <f:validator binding="#{bindings.Details.validator}"/>
                </af:inputText>
                <af:spacer width="10" height="10"
                           binding="#{backingBeanScope.backing_Test.s5}" id="s5"/>
                <af:inputText value="#{bindings.Action.inputValue}"
                              label="ACTION TAKEN"
                              columns="#{bindings.Action.hints.displayWidth}"
                              maximumLength="#{bindings.Action.hints.precision}"
                              shortDesc="#{bindings.Action.hints.tooltip}"
                              binding="#{backingBeanScope.backing_Test.it4}"
                              id="it4" showRequired="true" required="true">
                  <f:validator binding="#{bindings.Action.validator}"/>
                </af:inputText>
                <af:spacer width="10" height="10"
                           binding="#{backingBeanScope.backing_Test.s6}" id="s6"/>
                <af:inputText value="#{bindings.Attachment.inputValue}"
                              label="#{bindings.Attachment.hints.label}"
                              required="#{bindings.Attachment.hints.mandatory}"
                              columns="#{bindings.Attachment.hints.displayWidth}"
                              maximumLength="#{bindings.Attachment.hints.precision}"
                              shortDesc="#{bindings.Attachment.hints.tooltip}"
                              binding="#{backingBeanScope.backing_Test.it2}"
                              id="it2" rendered="true">
                  <f:validator binding="#{bindings.Attachment.validator}"/>
                </af:inputText>            
                <af:spacer width="10" height="10"
                           binding="#{backingBeanScope.backing_Test.s8}" id="s8"/>
                <af:inputFile label="Upload File"
                              binding="#{backingBeanScope.backing_Test.if1}"
                              id="if1"
                              value="#{backingBeanScope.backing_Test.file}"/>
                <af:panelLabelAndMessage label="SUBMITTED BY:"
                                         binding="#{backingBeanScope.backing_Test.plam1}"
                                         id="plam1">
                  <af:outputText value="#{securityContext.userName}"
                                 binding="#{backingBeanScope.backing_Test.ot1}"
                                 id="ot1"/>
                </af:panelLabelAndMessage>
                <af:inputText value="#{bindings.Userid.inputValue}"
                              label="#{bindings.Userid.hints.label}"
                              required="#{bindings.Userid.hints.mandatory}"
                              columns="#{bindings.Userid.hints.displayWidth}"
                              maximumLength="#{bindings.Userid.hints.precision}"
                              shortDesc="#{bindings.Userid.hints.tooltip}"
                              binding="#{backingBeanScope.backing_Test.it1}"
                              id="it1" rendered="false">
                  <f:validator binding="#{bindings.Userid.validator}"/>
                </af:inputText>
                <af:panelGridLayout binding="#{backingBeanScope.backing_Test.pgl1}"
                                    id="pgl1">
                  <af:gridRow marginTop="5px" marginBottom="5px" height="auto"
                              binding="#{backingBeanScope.backing_Test.gr1}"
                              id="gr1">
                    <af:gridCell marginStart="5px" width="auto"
                                 binding="#{backingBeanScope.backing_Test.gc1}"
                                 id="gc1">
                      <af:commandButton
                                        text="Submit"
                                        disabled="#{!bindings.Commit.enabled}"
                                        binding="#{backingBeanScope.backing_Test.cb2}"
                                        id="cb2"
                                        action="#{backingBeanScope.backing_Test.cb2_action}"/>
                    </af:gridCell>
                    <af:gridCell marginStart="1px" width="auto"
                                 binding="#{backingBeanScope.backing_Test.gc2}"
                                 id="gc2">
                      <af:commandButton text="Cancel"
                                        binding="#{backingBeanScope.backing_Test.cb4}"
                                        id="cb4"
                                        partialTriggers="pfl1" disabled="true"/>
                    </af:gridCell>
                  </af:gridRow>
                </af:panelGridLayout>
                <af:panelGridLayout binding="#{backingBeanScope.backing_Test.pgl2}"
                                    id="pgl2">
                  <af:gridRow marginTop="5px" marginBottom="5px" height="auto"
                              binding="#{backingBeanScope.backing_Test.gr2}"
                              id="gr2">
                    <af:gridCell marginStart="5px" width="auto"
                                 binding="#{backingBeanScope.backing_Test.gc5}"
                                 id="gc5">
                      <af:resetButton text="Clear All"
                                      binding="#{backingBeanScope.backing_Test.rb1}"
                                      id="rb1"/>
                    </af:gridCell>
                    <af:gridCell marginStart="1px" marginEnd="5px" width="auto"
                                 binding="#{backingBeanScope.backing_Test.gc6}"
                                 id="gc6">
                      <a href="mailto:noharinc.com?subject=NO HARM Observation Feedback">Mail</a>
                    </af:gridCell>
                  </af:gridRow>
                </af:panelGridLayout>
                <f:facet name="footer">
                </f:facet>
              </af:panelFormLayout>
            </f:facet>
            <f:facet name="header"/>
            <f:facet name="end"/>
            <f:facet name="start">
              <af:group binding="#{backingBeanScope.backing_Test.g1}" id="g1">
                <af:decorativeBox binding="#{backingBeanScope.backing_Test.db1}"
                                  id="db1" topHeight="180px">
                  <f:facet name="center"/>
                  <f:facet name="top">
                    <af:image source="/[email protected]" shortDesc="NoHarmLogo"
                              binding="#{backingBeanScope.backing_Test.i1}"
                              id="i1"/>
                  </f:facet>
                </af:decorativeBox>
              </af:group>
            </f:facet>
            <f:facet name="branding"/>
            <f:facet name="copyright"/>
            <f:facet name="status"/>
          </af:pageTemplate>
        </af:form>
      </af:document>
    </f:view>
    <!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_Test-->
  </jsp:root>
  
  
  
  

  Here is my java code snippet:

  //Method to create blobdomain from selected file
      private BlobDomain createBlobDomain(UploadedFile file) {
          InputStream in = null;
          BlobDomain blobDomain = null;
          OutputStream out = null;
          try {
              in = file.getInputStream();
              blobDomain = new BlobDomain();
              out = blobDomain.getBinaryOutputStream();
              byte[] buffer = new byte[8192];
              int bytesRead = 0;
              while ((bytesRead = in.read(buffer, 0, 8192)) != -1) {
                  out.write(buffer, 0, bytesRead);
              }
              in.close();
          } catch (IOException e) {
              e.printStackTrace();
          } catch (SQLException e) {
              e.fillInStackTrace();
          }
          return blobDomain;
      }
  
  //Action lsitener for submit button
      public String cb2_action() {
          BindingContainer bindings = getBindings();    
          OperationBinding operationBinding = bindings.getOperationBinding("Commit");  
          //Grab the file
          UploadedFile myfile = (UploadedFile)this.getFile();
  
          //Set the Attachment InputText field value to the blob domain generated
          FacesContext facesCtx = FacesContext.getCurrentInstance();
          Application app = facesCtx.getApplication();
          ExpressionFactory elFactory = app.getExpressionFactory();
          ELContext elContext = facesCtx.getELContext();
          ValueExpression ve = elFactory.createValueExpression(elContext, "#{bindings.Attachment.inputValue}",Object.class);
          //set the Attachment value to the blobdomain contents before inserting into db
          ve.setValue(elContext,createBlobDomain(myfile));
        
          //Commit input into Database     
          Object result = operationBinding.execute();     
          if (!operationBinding.getErrors().isEmpty()) {
              return null;
          }
        
          //Display popup message
          FacesContext con = FacesContext.getCurrentInstance();
          FacesMessage message = new FacesMessage(FacesMessage.SEVERITY_INFO,"Thank you for submitting your observation.","");
          con.addMessage("",message);
        
          return null;
      }
  
  
  

  haha OMG finally got it to work thanks @Timo Hahn (idk why didn't you tag) and Cvele_new_account

  After reading comments Timo again and blog and wire with cvele comment

  Solution was to make sure my update of bindings is set correctly, then check the "Insert" for updating the after:

  

• What Miss me? CO extension!

  I made an extension simple controller, but it seems that the code does not take effect, as it should. According to me, if I remove the class file of the server that the page hangs saying file not found class. But still the code does not seem to enter into force.

  I have attached the controller class to the Page level. And try to extend the page

  / Oracle/Apps/POS/beg/WebUI/ByrTaxDtPG

  
  

  Also when I run the page from my workstation in debug mode it reached the line but don't stop there rather few steps above without needing me to press F9. Whats happening? I really don't understand.

  Later, I created a test CO in Hello World PG and it works fine. All breakpoints and all behave as expected.

  Someone has an idea?

  The controller extensions to bounce the server?

  Pls find below code I've written for the controller. I put later more logic to it, but even if it does not work

  package xxcust.oracle.apps.pos.supplier.webui;

  Import oracle.apps.fnd.framework.webui.OAPageContext;

  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;

  Import oracle.apps.pos.supplier.webui.ByrTaxDtCO;

  Import oracle.apps.fnd.framework.OAViewObject;

  Import oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean;

  Import oracle.apps.fnd.framework.OAApplicationModule;

  Import oracle.apps.fnd.framework.webui.beans.layout.OAHeaderBean;

  Import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;

  Import oracle.apps.fnd.framework.webui.beans.message.OAMessageStyledTextBean;

  Import oracle.jbo.ViewObject;

  SerializableAttribute public class ByrTaxDtCOExtension extends ByrTaxDtCO {}

  public ByrTaxDtCOExtension() {}

  }

  {public procesRequest (pageContext OAPageContext, OAWebBean webBean) Sub

  super.processRequest (pageContext, webBean);

  OAMessageTextInputBean TaxInput = (OAMessageTextInputBean) webBean.findChildRecursive ("taxPayerID");

  TaxInput.setRendered (false);

  OAMessageStyledTextBean TaxStyledText = (OAMessageStyledTextBean) webBean.findChildRecursive ("taxNotDisplayed");

  TaxStyledText.setRendered (false);

  }

  }

  Well guys have finally found the problem

  Its so stupid of me but I am happy that it worked finally. That's what we say "we dig all over the mountain and what we found was a mouse."

  If you guys notice the code I wrote

  ' Public Sub procesRequest (pageContext OAPageContext, OAWebBean webBean)

  Instead of

  public void processrequest (pageContext OAPageContext, OAWebBean webBean)

  has been adding new features to the class rather than to substitute class is great because of the spelling error

  Well doesn't bother me that it was my first assignment on OAF!

  Thank you guys!

• Issue of NAV bar

  I built the first handful of pages for a site using DW CS4. I have a few flaws that I can't seem to get sorted.

  Here is the site:

  http://www.prospectrealty1.FatCow.com/index.html

  First question is the main navigation bar (in the header). I created it in floating css background images and using a: link and a: hover and a: active. It works very well (in firefox) except for one thing. I want links to active (orange) color when the user is on the associated page. So the link for STAR is white when, has the shadow to the overview effect and would be the Orange color down. I can't figure out how to get a low State to work.

  Second problem is with the horizontal AMT at the top. It looks good in Firefox, but in IE 8 the right email link to put on a second/bottom line and who isn't good more it seems messy to the top of the nave at the bottom of the header bar.

  Any help with this will be appreciated.

  Thank you!

  markf12 wrote:

  Thank you for your answer! I will try what you suggest and I have a few questions about this. You say to add it to the current page. The menu is part of a template and intended to carry through all the pages. It is not editable on a per page basis. This is in conflict with your suggestion?

  you mention also my css is "a bit crazy". I am fairly new to this if it is not a surprise for me . Please let me know if there is anything fundamentally wrong css / or developed on the whackness schema.

  Thanks for your help!

  To start you are doing great! I'm not trying to ask, but your CSS is lack of structure, consistency and is extremely bloated and repetitive; but it's something that you will learn as hone you your skills. Remember, writing better CSS is a matter of practice, CSS is easy to learn but difficult to master in a short time.

  Example: If you want to use a repetitive way css style, attached to a class selector, make use of the legacy and the appropriate naming convention.
  Example: You have a sidebar called rightContent; What to do if your boss or your client has requested that you place the contents to the left, will change you the name of leftContent? You would place a rightContent left? What content on the left?

  Instead, use the following names: Sidebar, primarySidebar, secondarySidebar, primaryContent, subContent.

  This way you can move things around.

  That said, Yes, you will need to place this class in each page of the main template so that when you make additional pages from the template or the Web site, it becomes included in all other pages. It would have been easier from the start. Therefore, when you design your model, include the active selector on every page of the respective tab/links, that all you have to do is make changes in your css.

  Thank you!

• dispatchEvent - bug in my code

  I can't find the bug in my code.

  In the main document class I created the new instance of a class IA and a listener for an event personalized as Fallows:

  _ai = new AI(_param1, _param2);
  _ai.addEventListener("decisionMade", bestOptionFound, false, 0, false);
  
  private function bestOptionFound(evt:Event):void{
       trace("hello");
  }

  Then, in the class of GOT it, I do all my logic and after its finished I run a function this courier for a master class event:

  Inside AI class:
  private function bestOptionSet():void{
       var boole:Boolean = hasEventListener("decisionMade");
       var boole2:Boolean = willTrigger("decisionMade");
       dispatchEvent(new Event("decisionMade", false, false));
                 
       trace(boole);
       trace(boole2);
       trace("function works");     
  }

  Then my tracing instructions give me information that my work of function very well, but it is there no listener attached to my class HERE (boole and boole2 = false). This is why my Manager cannot be triggered.

  So my AI class Instance works fine and all work inside it work very well as well. But there is no listener attached to this class my tracing instructions tell me. But I add " _ai.addEventListener("decisionMade", bestOptionFound, false, 0, false); ". ""
  Any ideas?

  you're shipping your event BEFORE you add to your look.

• Access to the objects in the display list

  I have a scene with instances of bauble_mcs to this topic that are attached by the class of document on the main timeline (can someone tell me what the right term is here?  I don't know what I call the main timeline in AS3).

  I then instances of attached snow_mc of the same class.  Inside of the snow_mc I want to test to see if it's hitting all bauble_mcs but I don't know how!

  inside the snow_mc I am trying:

  {if (this.hitTestObject (this.parent.bauble_mc))}

  }

  flashing says:

  1119: access of property may be undefined bauble_mc through a reference with static type flash.display:DisplayObjectContainer.

  For your posting earlier I would have tried the following:

  {if (this.hitTestObject (MovieClip (this.parent) .bauble_mc)))}

• Global failure XML listener

  So I have a SWF that pulls other sovereigns, and subsequently these sovereign wealth funds pull XML whenever they want. What I would like, it's something to tell me if ALL the XML loading fails on the main sequence, so I can raise an event. I know I can go in each XML code in a method 'failure' and the function of loading, but I would like only 1 earphone do all the work. Is this possible?
  
  who is?

  This would require a custom class that extends the XML class. In this way, you can override the onLoad event and manage exceptions. Attached to a class that I use, tailor-made according to your needs.
  The constructor of the class shows how to catch an error with the file extension. Delete it if you wish.
  You pass a path and a reference to the movieclip to the constructor. The onLoad method to load your movieclip to play (you can change that in any action you want) when loading is successful or manages exceptions based on the name of the element (instance). Again, you can change the actions here to meet your needs. (Yes, if else switch works...)

• Buttons appear with different appearance with in the same page!

  Hello
  
  I have a custom of the OPS with 5 buttons page.
  They are all of the submit button.
  I am not attaching any CSS class to one of these buttons.
  
  I see that on these 5 buttons, 2 appears with a look and feel of Oracle (with rounded edges, light brown etc.) with 3 with a sort of Windows XP appearance (edge, silver, etc.)
  
  I can't understand the reason for it.
  
  Help, please!
  
  As an alternative, please let me know if I can apply any standard style to make explicit that the buttons are compatible.
  
  Note - version EBS - 11.5.10
  JDev Version 9.0.3.5
  
  Thank you
  Ashok

  Multiple threads...

  Re: Pimples is different when it is run by report locally on the server

  Re: Problem with the appearance of the button send on the OA Page - Urgent

  Thank you
  -Anil

• CS3 Runtime shared library link

  I'm new to the runtime shared libraries, so thought someone will see what obvious thing I am doing wrong.
  
  Given:
  
  1 created an Assets.swf with a MovieClip symbol exported with a link name called "Symbole1". "Export for actionScript", "Export for run-time sharing" and "Export in first frame" is checked them all. URL: 'Assets.swf '.
  
  2. created a Movie.swf that matters 'Symbole1' Assets.swf (using the dialog open external library).
  
  3. attached a Document class to Movie.swf containing Movie.as code attached below.
  
  Result: Two compiler errors:
  
  Movie.As, line 9 1046: Type was not found or is not a compilation contant: symbole1
  Movie.As, line 9 1180: call to a method may not set symbole1.
  
  Movie.As code:
  ---------------------------------------------------------------------
  

  I wonder why Adobe allows even the box "Export for runtime sharing" if she does nothing for AS3? This certainly lead me in the rabbit hole hurt trying to get this approach to work.

  In any case, I made the changes of code suggested to Movie.as (attached). Box off the 'export for runtime sharing' on symbole1 in Assets.fla. Levied on importation of symbole1 Movie.fla. And, of course, the importation of symbole1 works now. Thank you, kglad.

  So in summary, the two points that I missed were:

  Each exported symbol must have as a definition of the class associated with a .as file. If this symbol is imported using the AS3 "import" directive.
  Ignore the "Export for runtime sharing" mechanism entirely and use the Loader class.

• Deselect the rules using the Attachment Jena class

  Hello
  I use class Attachment Jena (oracle.spatial.rdf.client.jena.Attachment) make an inference to my data. I use the OWLPRIME and customized for my inference rules database. According to best practices with RDFS/OWL inference, I can remove individual rules of a rules using this SQL database:
  
  BEGIN
  SEM_APIS. () CREATE_ENTAILMENT
  "example_rdfsidx,"
  SEM_Models ('my_example'),
  SEM_Rulebases ('RDFS'),
  SEM_APIS. REACH_CLOSURE,
  "RDFS12 -");
  END;
  
  I would like to make my inference without rule OWLPRIME owl: disjointWith. Is there a way to do this, use the classes in Jena?
  Thank you
  Chuck

  Yes, you bet.

  In fact, it couldn't be more simple :)

  graphOracle.performInference ("DISJH");

  The API and the javadoc is
  /**
  * Creates an index/entailment rules based on the underlying model of RDF/OWL
  * and all other models attached and rulebases via {@link oracle.spatial.rdf.client.jena.Attachment} .
  *

  
  * Note that the transaction will be committed before any inference is performed.
  * Call {@link #rollbackTransaction()} If there is no change
  * should not be persistent.
  *

  
  *
  @param components specifies the parameter INF_COMPONENTS_IN
  * in the SEM_APIS. CREATE_ENTAILMENT PL/SQL interface.
  * It applies only to Oracle 11g and can be NULL. If not zero, it offers the possibility
  for the selective inference. See the document below for more details:
  * Oracle Database Technologies semantics Developer's Guide 11 g Release 1 (11.1)
  *
  * @throws SQLException when there is error on the server side.
  */
  public synchronized void performInference (String components)
  throws SQLException

  See you soon,.

  Zhe Wu (Alan Wu)