Attribute of the OCR

Similar Questions

• Image indexable vs searchable Image (exact) - quality of the OCR

  I work in the legal field and have always used the "Searchable Image (exact)" parameter when you run internal OCR on the document productions.  I am currently using Acrobat X when I do my own OCR.

  I have a seller who says they use Acrobat 9 "Searchable Image" for all productions of their document.  They say even if the actual image of the document is altered, they get better quality OCR results than they do with 'Searchable Image (exact).'  They say that the document is corrected that text can be read by the OCR engine.

  My problem is that a lot of documents is changed.  Architectural drawings in particular are dramatically tilting to the right, the edge of the drawing is being cut entirely from the document and dotted lines are added to the image itself - apparently where used to be at the edge of the page.  This is unacceptable.  They say that the entire drawing being reversed so that the first lines of the text on the drawing's horizontal.  So if there is a small piece of text that is tilted, the entire drawing is inclined to adapt to this one piece of text.

  Is it true that OCR is much better using "Searchable Image" vs "indexable Image (exact)"?  I need to select a configuration option for all the docs, and I am inclined not not change our documents in any way at the expense of the OCR.

  They also say that they have docs of OCRing evil I can't OCR without problem using Acrobat 8 and Acrobat X.  Does this make any sense?  I went directly from 8 x, so I'm not familiar with Acrobat 9.

  Once the OCR files use "Searchable Image" and SAVED, you need to go back and
  find copies of the original files pre - OCR and reOCR them by using "indexable Image (exact)"?

  If having this "faithful" to the original document is an indispensable attribute then, Yes, get you the pre - OCR had PDFs and run through the searchable Image (exact).

  Regardless of the version of Acrobat (4.x, 5.x, 6.x, 7.x, 8.x, 9.x, X or XI), the essential characteristic of the searchable Image (exact) has not changed.
  In other words, the image does not suffer the "tweaking" provided by indexable Image.

  Therefore, the PDFs by searchable Image (exact) of which version of Acrobat will be acceptable.

  What happens if you treat a PDF file containing a scanned image of text content through the searchable Image (exact)?
  The PDF wins a second 'hidden layer' of the production of the OCR. (I have it done - inquiring minds want to know, huh?) )
  Of course, using Acrobat Pro, we could eliminate an existing one 'hidden layer' OCR output.

  [addendum: this deletion is of * all * this - if a show it has disappeared, if more than one, then all go]

  The path "click on" ways to resolve this problem varies depending on the version of Acrobat.

  Because you work with PDF files have been the exact presentation of the original document is import, you can set up Acrobat that you have certain obstacles to an "oops".

  An example:

  In the Acrobat preferences, select the "Convert to PDF" category, and then select TIFF.
  Change the settings.
  Monochrome compression - CCIT G4
  Grayscale Compression - ZIP
  Colours - ZIP compression
  RGB policy: Preserve embedded profiles
  Political CMYK: Off
  Political gray: Off
  Other policies: preserve embedded profiles

  An example:

  Configure Acrobat Optimization Options
  --| via Acrobat optimize scanned PDF document
  --| through the Optimization Options dialog box presented after clicking the ' Options' button in the pane of optimization in the configuration dialog box to create a PDF from a Scanner.

  Uncheck the "Automatic" (you don't want "Aggressive" or "Adaptive")
  Select "Custom".

  For Compression
  --| Color/Grayscale--> ' select "Lossless."
  --| Monochrome--> select "CCIT Group 4.

  For filtering
  --| review the help of Acrobat to read the discussion on the choices that are available.
  (Deskew |) Background removal | Edge shadow removal | Clean | Descreening | Removal of Halo | Sharpening text)

  Open the help of Acrobat and go to "analyze a paper as a PDF document.
  A close reading of the information will be informative and useful.

  You want to avoid dealing with any image of the record of lossy compression (which compresses by destructive removal of pixels - so "corrupt" that "faithful").

  You want to avoid filtering which alters the image.

  Be well...

  Post edited by: CtDave

• Cannot set attribute of the param element value using javascript in setAttribute

  When adding the items param via createFragment the javascript in setAttribute function does not set the "value" attribute It is necessary to set the nodetext to add this attribute to the value of the param element.

  Second, when using the method of the generated html code defines the 'value' to the innerHTML. HTML code resulting in the display by "Inspect the system" looks like this.

  < parameter id = "myID" > myValue < / param >

  Note: [the element close text < / param > is displayed correctly using inspect, but when using file-> SavePageAs the end text is not saved correctly.] I reported this in another question of moz. support FF.]

  function setparamAttrs (parmID, parmVal)
  {

  var gData = document.createDocumentFragment();
  

   var newNode = document.createElement("param");
   var textStr = document.createTextNode(parmVal);
   newNode.appendChild(textStr);
  

   newNode.setAttribute("id", parmID);
   //newNode.setAttribute("value", parmVal);  // this does not work
   //newNode.setAttribute("innerHTML", parmVal);  //this does not work
  

   gData.appendChild(newNode);
   document.body.appendChild(gData);
  

  }

  However, I was able to retrieve the "value", once it has been added using:

  var val = document.getElementById("parm0").value;)

  getAttribute ("value") does not work either.

  Finally, I added the param elements to my HTML code like this.
  < parameter id = "myID" > myValue < / param >. Then I tried to extract the value using document.getElementById("myID").innerHTML. No text has been returned. When I looked at the HTML document with inspect my HTML param element is displayed as < param id = "myID" > myVal. The closing text of the element has not the same when I use SavePageAs which I mentioned previously.

  Yes, this is the correct way to this code and it works for me without any problem.

• HP Deskjet Ink Advantage 3835: My HP printer Scanner does support the OCR feature?

  My HP Deskjet Ink Advantage 3835 printer Scanner does support the OCR feature?

  Of course, do all scanners. It's the software, not the scanner.

  Free OCR software on the web.   Just search.

  FreeOCR

  or

  Free OCR to Word.

  Both work very well.

• Add attributes to the class IMAQdx

  I have a Subvi change several attributes of the camera; However, none of these attributes are included in the class IMAQdx.  Therefore, I have to use a long doubling property node where each value, I want to view or change, I must first write this attribute as current attribute.  Is it possible to add attributes to the class, so they will fill in the list of nodes of property of the attributes of the camera?

  Sorry, no, it is not possible today. We are actively seeking improvements API to address this kind of problem in the future versions, however. Out of curiosity, are properties youj are eager to change provider-specific or are common already specified by the features Standard Naming Convention (http://www.emva.org/cms/upload/Standards/GenICam_Downloads/GenICam_SFNC_2_2.pdf)

  Eric

• Recycle the OCR in LabVIEW (retrieve the index of characters found in the set of characters file)

  Hi all

  I'm trying to recycle my set OCR file in LabVIEW. Basically, I show the reading string to the user and in case something goes not the respective character must be corrected in the charatcer set file, according to the text entered by the user. It sounds pretty simple, but I haven´t find a way retrieve the character index in the file must be recycled. For this I would be needs to know what character in the set file has been found to resemble one give read character. Do you know how I can get this info? I intend to use the OCR rename character VI.

  Best regards

  Esteban

  Hello Arroyo,

  You can retrieve the total number of characters formed using IMAQ OCR VI property and looking for property "size of char set.

  http://zone.NI.com/reference/en-XX/help/370281W-01/imaqvision/imaq_ocr_property/

  Kind regards

  Elli

• How to control the attributes of the sliders with Boolean button

  Hello world

  I would like the attributes of the control sliders by clicking a Boolean. For example: when I click on my button, I want the cursor to disappear or change color...
  How can I do this? I saw that I can select cursor style, color slider etc. in the property of the XYgraph node, but I don't know how to use it.
  Any idea?

  Best regards
  MartinO.

  You first need to identify your cursor active then you can set the visible property of the cursor in your Boolean control. Creating a property node, drag to show two properties, set the first wire of ActCrsr years the number of cursor for it (0 for the first slider). Now select Cursor.Visible for the second property and wire your Boolean instead. You can add other properties after that.

  Ian

• Change the attributes of the camera with a .ini file

  Hello.

  I would change some attributes of camera through an INI file, before you run the User Interface.

  The problem is that when I view the values of the modified attributes, they are not changed: it's always the same values as in the case of camera NIMAX.

  In fact, I've logged IMAQdx with IMAQdxOpenCamera, then I loaded the Camera.ini value for the attributes of the camera, and finally, I closed the session with IMAQdxCloseCamera.

  I can't wait to see your ideas!

  Thomas1330

  Hello

  in fact, I solved the problem.

  I used the following function: IMAQdxReadAttribute (session id, ini_pathname)--> only the attributes in the .ini are changed in the file of the camera until I close my program

  Thomas1330

• Need to update for the OCR for HP c5180 software

  The OCR software that came with my HP c5180 all-in-one no longer works under Mountain Lion.  Is there a version update available?

  Hi carmeljacques2,

  No, there is no version update of the OCR software. You can find a more updated to version date from the site of Iris Reader at the link below.

  Readiris™ 14, OCR software

• Selection of Inspection based on the attributes of the image

  I'm processing the stored images and must choose an inspection based on attributes of the image as the name and the size (length in pixels).

  Currently, I do all this in only one inspection, but since I'm inspecting several product families (differentiated my name of the image), and several sizes for each family, my inspection algorithm becomes very difficult to manage, so I would like to create a supervisor application that can determine which family of products and the size I'm looking, and then run the corresponding inspection and then do some data sharing and saving the image and loop back to the next image.

  I played with the ability to select Inspection in VBAI, but since I'm not on the material or communications to select the inspection, I can't seem to find a viable solution, ideally, I would like to go through the step of configuration once, then jump to the state diagram for the treatment of the initial image (determine the product family and size) then go to 'Select Inspection' and run the corresponding inspection.  This is where I'm stuck, IE., how to trigger the jump to select inspection in the state diagram?  Some people I have consulted so far say: you can't do that!  Anyone beg to differ?

  If I can't access select Inspection of state diagram, then plan B is to use the LabView API and make the principal contractor in LabView, it is where I need to go?

  Thank you

  Eric

  If you have the indicator Activate Product select enabled, select product State will run automatically after the State inspect goes to terminal completion. You can use a VI select LabVIEW Run in the State of product for your logic and move to the next round to load. With Vision Builder AI 2010, this path can be considered to be the real path to the inspection (inspection select dynamically run then) so you do not preconfigure a lookup table of inspections to run with values (it was the previous way of doing and it does not allow to dynamically load new inspections that weren't in the preconfigured table). Don't know how it works with your system, but using the LabVIEW API is an alternative that would give you better control and. You might even have a stage run a LV VI specify the control to use on an iteration in Prioduct selection state and inspection of logging of data/images to use later, but due to the opening and closing of the inspections overload new inspections may make having an inspection separate for logging of common data/images does not not your needs timing.

  Hope this helps,

  Brad

• WithOpen on the compatibility of the OCR Office?

  I downloaded from HP, but when OCR software I scan copy, it asks if you want to send RTF or WordPad.  I use Open Office.  Is it possible to copy it to that?  I have a HP Photosmart 3000 all-in-one printer and use Windows 7 on my laptop.

  Hi Jenrho,

  The OCR software may not recognize Open Office. If you save it on Wordpad you should always be able to open the document in Open Office. If this does not work, you will need to contact Microsoft to check what OCR program is compatible with Open Office.

• REQUEST R IS PROVIDED ON THE CD IN THE OCR FOLDER, INSALL YOUR OCR SOFTWARE?

  I'M GETTING THIS MASSAGE WHEN I SCAN AND YOU WANT TO SAVE, ANOCR APPLICATION IS PROVIDED ON THE CD IN THE OCR FOLDER, INSALL YOUR OCR SOFTWARE

  Hi ethanpapi , thanks for getting back to me!

  It seems that you are using a Lexmark printer.  I would recommend contacting Lexmark support.

  Lexmark support

  Thank you!

• Could not load the manifest attribute of the main class of C:\program files\frostwire\commons - connect

  original title: I need to know what means this message and I can remove it from my computer

  doess someone knows what this message means? Could not load the manifest attribute of the main class of C; \program files\frostwire\commons-logging, pot every time I look at this subject in my file, it appears, I'm not good at all with computers but I know im short-term memory or space on this computer and I tried to go into my programs and delete, can you please help me understand what I can and can not delete to give me more space? Thanks, im running Windows Vista! If you would like more information, I'm sorry, just ask me? Thanks again, I hope someone can help me! :(

  This discussion forum on Microsoft Security Essentials antimalware. You can get help in the Microsoft Vista answers forums - http://answers.microsoft.com/en-us/windows/forum/windows_vista

  Jim

• I'm trying to scan a document using my dell scanner, but I get the message: 'an image to the application of the texts is provided for you on your cd in the OCR file.

  Original title: Dell Imaging toolbox: analysis: change Image text

  Trying to scan a document, I get the message: an image to the application of the texts is provided for you on your cd in the OCR file.

  -Cancel, install your ocr software, try again.

  There is no image to the application of the texts in the file of the ocr, Abbyy and Recore and neither has the image of the application of the texts.  Heeeelp!

  Communicate with people who have done your scanner and ask them to supply the missing software.  Without this you will not be able to proceed.

  "blessedandhighlyfavored" wrote in the new message: * e-mail address is removed from the privacy... *

  Trying to scan a document, I get the message: an image to the application of the texts is provided for you on your cd in the OCR file.

  -Cancel, install your ocr software, try again.

  There is no image to the application of the texts in the file of the ocr, Abbyy and Recore and neither has the image of the application of the texts.  Heeeelp!

• Recreate the attributes of the My Music folder

  Hi guys

  I tried to move the location of 'My music' in order to free up space on the c drive, but it was wrong and the file left in the user account is damaged. I created a new folder but it doesn't have the attributes of the my previous music folder. I thought of a restoration, but the only point is well before I did a lot of independent work on the system, so this isn't a realistic option.

  Can someone tell me how I can put in place a new folder my music with the correct attributes?

  Hi Graham,

  Sorry for the delay in my response.

  Restore music library to its default values and then try to redirect the music library to another location.

  a. open Windows Explorer. Under libraries.
  b. right-click on the corresponding library (Music), and then choose Remove.
  c. click Yes when asked for confirmation.
  Note: Deleting a library does not remove the content of the included files. However, you need to add or include your folders manually, if necessary.
  Include folders in a library:
  http://Windows.Microsoft.com/en-us/Windows7/include-folders-in-a-library
  d. then, in the Windows Explorer navigation pane, click libraries and click on restore default libraries.
  e. that recreates the library that you just removed.
  f. this option only restores the default libraries supplied with Windows 7.

  Also refer to this:

  Redirect a folder to a new location

  http://Windows.Microsoft.com/en-in/Windows/redirect-folder-new-location#1TC=Windows-7