Recycle the OCR in LabVIEW (retrieve the index of characters found in the set of characters file)

Similar Questions

• Adobe Premiere elements 13 I just and it crashes on export, no matter the setting or video file

  I'm cutting together some of my videos of shadowplay. Everything works until I have try to export. It constantly crashes after that. The furthest I did with the video hand is 11% and 40% on each individual clip when I tested them separately. I ran through every able preset 1080 and 1440, and the results are the same. I find it odd that VSDC can manage these clips, but dies of an $80 program. Any help solving this would be appreciated.

  I came across a problem similar to mine on Overclockers.net. They reported accidents with adobe products on their first otherwise stable/burntest tested Overclocks. I gave up my overclock and finally managed to do work.

• When I change the setting by LabVIEW on my device, I see change on the monitor of the device?

  When I change the setting by LabVIEW on my device, I see change on the monitor of the device?

  This question should be addressed to the manufacturer of the device. From your previous posts, I guess you use GPIB or serial. If the unit has received the order, the manufacturer should be able to tell if no indicators on the device to update when the order is received. Based on my experience, however, the device indicators will most likely update on receipt of an order successfully.

• I'm doing a Shell call Firefox in the directory C:\Program Files (x 86) of \Mozilla FireFox\ and LabView shell call gives an error.

  I'm doing a Shell call Firefox in the directory C:\Program Files (x 86) of \Mozilla FireFox\ and LabView shell call gives an error. I can go to the BACK shell and make the fine call, but Labview Shell gives several errors. Anyone know how to get around the problem of directory with the name of the Program Files (x 86) directory with space and the (x 86) BACK doesn't seem to like?

  You must use quotation marks.

• With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.

  Hello, I have Norton antivirus and apparently everything is installed correctly but when I click the icon on the desktop after a very short time, the message appears.  I have an Acer Aspire V3 windows 8.1 - 64 bit

  I am trying to solve this problem since last week.  No change at all.  (I uninstalled all the components of the front range of HP printers)  The printer I have is HP C6250 all-in-one.

  I followed all the steps in the HP website and a couple of nights, it seemed that everything was working, when I prayed me to turn on the printer, one of the color ink cartridges more than ink and I could not finish the job.  With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.

  I thank very you much.

  Unless you have installed the full software from HP support features, none of the options on the cartridges of ink or HP Diagnostics will work

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=3308554

  And if you bought "compatible" ink cartridges and not genuine HP that you receive msgs error cartridge like the habit of these cartridges compatible function with the HP software

• How to remove the comments of several files with the Action Wizard, without losing the OCR?

  Hey everybody,

  With the help of Acrobat DC Pro.

  I used Action Wizard previously to remove comments (or more specifically, highlight) documents.  I created a custom command using 'Delete hidden information' and not selected everything but 'delete comments '. However, my files keep losing OCR, I did after I do this.

  I also tried to use the 'Sanitize' tool to delete comments, and it's the same thing.

  Is it possible to automate this process in a way that maintains the OCR?

  Thank you!

  This JavaScript code will remove all the strengths of a file and will not affect anything else in it:

  this.syncAnnotScan();
  var annots = this.getAnnots();
  if (annots!=null) {
      for (var i=annots.length-1; i>=0; i--) {
          if (annots[i].type=="Highlight")
              annots[i].destroy();
      }
  }
  

• Failed to retrieve the LR 5 installation files

  LR5 purchased and downloaded for PC from Amazon. Get the error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder"when the extraction of installation files. He has more than enough space, and the destination folder is the desktop. This happens on both my Surface (Windows 8.1) and Dell (windows 7). What's wrong?

  This is an incomplete download. the size of the file must be ~871.9mb ~ 892825b

  In addition, it is a self-extracting file.  then you just click (or double click on) the exe file.  do not manually extracted.

  Another option for you, if you have problems with this file:

  If you follow the 7 steps you can directly download a free trial here: http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html

  and activate it with your serial number.

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• Have file save dialog box to configure the type of csv file

  I'm saving a file of the program to the csv format recipe.

  I can save and retrieve the file without problem.

  I want to do is have the save file dialog box present a *.csv instead of the default file type all files *. * and then depend on the user to enter file.csv

  Does anyone know a way to make this programitically?

  Hi Clark,.

  the FileDialog has some entries 'label model ". Have you used the or read the context-sensitive help for this function?

• Executable cannot find the custom error code file

  I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

  When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

  When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

  It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

  There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

  List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

  Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

• Reduce the size of a file created by "write to waveform.

  Hello

  I'm using labview in 2012 and I have a problem with the size of the tdms file generated by the function "write to waveform. The data is real time 16 channels in a series of X NI USB-6343 and is composed by the gains of the voltage on the y-axis with the absolute time on the x axis (waveform format). The size of the file is reached a Go command within a few hours. Is it possible to reduce the size of this file? All configurations on the component?

  Thanks for the help.

  Best regards

  Marcelo Nobre

  Yes indeed, there is a better way.  Instead of using writing on file express VI measure, try adding the DAQmx logging into your task DAQmx (before starting the task):

  

  This method writes the raw binary data unadjusted to the file (2 bytes per sample because it is a 16-bit data acquisition card) with scaling of information in the header of the file.  In the example you posted, you write the data which are already put across to the file (double 8 bytes for example).  What will make this change you expect to reduce your file size by ~ 4 x.

  If you wish you can compress the files once you have finished writing to them for further reduction of size, but there is no support to achieve so that you are currently writing in the PDM file.  In addition, you will need to unzip the file until you can access the data in the .tdms file.  You can probably get good results with something as simple as the data stored in a .zip file.

  Best regards

• Why the LV stores unchanged files in project?

  Hello

  I wonder why LV 'stores' files in a project that have not been changed?

  As a result, my configuration management tool provides these files too, although compare LV shows no difference.

  It is annoying because a check-in don't really reflect the list of these files which in fact have been changed?

  I can fix it somehow, or is this something inherent in LabView (if so why)?

  Thank you

  Peter

  You have the "separate compiled Code" enabled for your screws?

• Put the data of the set point in a waveform graph

  Hello

  In a graph of measure, which is the result of a waveform, I would add data of the set point as well. How can I add this data to set for the chart value?

  In a control loop system, the output is controlled by a labview program. I would like to see the point of this system as well as in the graph, these thresholds are changed at random times, so I don't know how to create a waveform of these data. Should I create a waveform of the setpoint, or y at - it another option to show the set value in the chart?

  See you soon,.

  Rolf

  That can make it much more difficult.

  At one point an array of 1000 points need to be assembled (obviously). How do depends greatly on your structure. Synchronize the time of the two signals can be very difficult. It would be easy if the set value only changed once a cycle of 1000 point.

  You may want to read the SP as an analog input, so you get 2 samples of the material here. In this way the two will always be synchronized. But I'm done alleady assumption, like this, the signal is an analog input (and the target value of one analogue output). What equipment do you use?

  I think always need you a loop to get data and a loop to set the SP. The two loops will be more parallel execution GLSL and synchroniseent. The trick is to synchronize, or for the deterministic timestamps in two loops. If you can make that happen, you 80% there. You could do loops timed loops (using the same clock). Then you get the timestamps in two loops. The MS loop has the queue changes, pushing the value and time. Then the loop of data can use values and hours to create examples of sp 1000.

• 2D Array element 1 duplicate an int and the other Date and time for the output to a file

  Try to change the example labview Agilent 34401 acquire and graph - SW Triggered.vi

  to display the data in a file with a date/time stamp, display things in a file delimited by commas, it's very simple in PHP, C, C++, and I heard this thing of labview was great fast tool but I work on this simple mod for 5 hours now and still cannot get this to work.

  I have attached my example updated, but I can't seem to get this thing to convert the date and time to something that can go in the same array as the data...

  
  

• Access to the OE 6 dbx file recovery

  I just opened OE6 and noticed that over a third of my local files dbx are missing.  They appear in the box of identities, however.  This happened after OE my files compressed the previous night.  I also just learned that the OE has a 2G file size limit.  My total files 3.1 G, but this has never been a problem in the past.  OS is XP.  Can someone give me some gudance?  Thank you.  Mary

  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
   
  
  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
   
   
  Recovery methods:
   
  If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
   
  To restore a folder bak on the message store folder, first find the location of the message store.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
   
  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  
  Note: If you have new messages in the folder you are go restore, move them to a folder first created user, or they will be lost. They can be moved once the old posts have been restored.
   
  
  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
   
   
  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
   
   
  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
   
  
  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
   
   
  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
   
  If you have not then bak copies of your dbx files in the Recycle Bin:
   
  
  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx
   
   
  And see:
  http://www.oehelp.com/OETips.aspx#4
   
   
   
   
   
  
  A general warning to help avoid this in the future:
   
  
  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
   
  
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently.
   
   
   
  For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
   
   
  And backup often.
   
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx  
   
   
   
  
   

• I lost all the contents of my files when I moved a folder to a new folder.

  I lost all the contents of my files when I moved a folder named my file which was a lot of archive folders inside subfolders to another folder named Folder1 My, who was not in the archive folders...  I have a copy of my portable hard drive on a hard disk, how can I recover the lost files from it?  I have Outlook 2010 and Windows XP Pro.

  Hello

  1. What do you mean, you have a copy of the portable hard drive on a hard disk?

  2 do you mean that this means that the files that has been removed from your computer are always present in your portable hard drive? And you want to copy the files on your computer?

  Try to find if the files in the recycling bin. Also if the files are present in your computer and have not got deleted follow the link below to

  Search for files and folders in Windows XP

  http://support.Microsoft.com/kb/308895

  It could be useful!