Audible alarm does not work

Similar Questions

• BlackBerry Smartphones alarm does not work in the morning?

  Hello

  I'm new to the Community Board and blackberry.  I have a problem with the alarm, I had my phone for about a week and the alarm has worked very well.  However, this weekend it stopped working.  As well as sounds made in the morning.  I double checked to see if it is in night mode and it is not.  I'm frustrated with it.  Should I get the app from quick pull to reset the memory and all that?  That would help?  Thank you

  In fact, I downloaded quickpull and restarted.  I set the alarm for 5 minutes later and it started working again.  I put it to reboot every day in the late afternoon, as suggested, it seemed to have fixed.  Thank you!

• Alarm does not work

  I have an alarm to wake me up to 650 each day of week (repeat). Now, the alarm leave more. To run the next morning, I have to disable the alarm on. That solves the problem for the next morning, but only that morning. In other words, I have to manually turn the alarm on so that it works the next day morning. Therefore, there is no point to having the repeat function. Anyone who knowes what is the cause?

  I forgot to say that it was my Apple Watch that presents the problem of the alarm.

• Do not disturb (on request) does not work

  I have an iPhone 7 more with iOS 10.0.2. I had set up as NEW when I got it. I use the function do not disturb I SLEEP every night to block the incoming notifications apps and emails (including work with the application Outlook email). I leave the phone won't cut not so I can make sure my alarm wakes me up the morning. But it does not work. I still wake up emails and notifications of the app. It worked on my old iPhone with iOS 6, 8, 9 or even 10.

  I see a lot of old messages and questions about DND not work, but they were more specific to older phones and ' iOS.

  Anyone else having this problem?

  Any ideas for help?

  Thank you.

  I'm sure that I understood this.

  I had "only when locked" checked and not 'always' in settings do not disturb.

  I leave my iPhone unlocked all night using the bedside table Central app as my alarm clock.

  There we go.

• P20-552: 2 GB SD card does not work.

  I have a P20-552 (PSP26E-025E9-S4), which is about 18 months old. I recently bought a digital camera (IxUS 750) barrel with a 2 GB Sandisk Ultra II SD card and the combination does not work well. Although I can transfer images from the camera to my Toshiba laptop with a USB cable, sometimes, I would use the SD slot on the laptop, but there seems to be a problem: seconds after pressing home the SD card in the slot, I get the message "disk is not formatted - do you want to format it now?". I said OK but then I get the message "cannot be formatted disk in drive E".

  The card continues to work perfectly fine in my camera and on my iPaq Pocket PC. In the Toshiba SD card works quite happy with Sandisk card of 256 MB SD, which is usually in my PDA.

  Anyone has an idea why the 2 GB card does not work in the Toshiba? It's updating a driver - I watch the other day but I couldn't find anything that seemed appropriate, but I might well have forgotten something...

  I'm running XP Home Edition (SP2) and are automatic updates IT. I have Norton Virus and Zone Alarm running and have no problems with other software/applications - at least, no problem, as someone suggested to suck my laptop overheating a few weeks ago ;-)

  Thank you, Brian.

  It seems that the unit doesn t support this card.
  See your user manual. You will find an information that this device supports only the following SD card formats: Mo 8/16/32/64/128/256 and 512

  According to this document, the 2 GB are high.

• Video recorder does not work after a while to 9700 and 9000

  Hello

  When I try to record videos on my series of blackberry bold 9700 and 9000 it does not work properly.

  It record video for a while after that he'll I'll stop recording. I am trying to use the socket for the recording of the video connection. My code works fine on storm9550.and also I added a playerlistener and in the events of update of the player, it shows event as error and event day that null.and when I try to change the image of the camera or pass command to any other fields it will stop recording

  I enclose my code as well as this.

  Thanks and greetings

  Rahul TERTULIEN

  Mobile applications developer

  import java.io.IOException;
  import java.io.OutputStream;

  Import javax.microedition.io.Connector;
  Import javax.microedition.io.SocketConnection;
  Import javax.microedition.media.MediaException;
  Import javax.microedition.media.Player;
  Import javax.microedition.media.PlayerListener;
  Import javax.microedition.media.control.GUIControl;
  Import javax.microedition.media.control.RecordControl;
  Import javax.microedition.media.control.VideoControl;

  Import net.rim.device.api.system.Backlight;
  Import net.rim.device.api.system.Bitmap;
  Import net.rim.device.api.system.Display;
  Import net.rim.device.api.ui.Field;
  Import net.rim.device.api.ui.MenuItem;
  Import net.rim.device.api.ui.UiApplication;
  Import net.rim.device.api.ui.component.BitmapField;
  Import net.rim.device.api.ui.component.ButtonField;
  Import net.rim.device.api.ui.component.EditField;
  Import net.rim.device.api.ui.container.HorizontalFieldManager;
  Import net.rim.device.api.ui.container.MainScreen;
  Import net.rim.device.api.ui.container.VerticalFieldManager;

  /*
  * Class for recording the video
  * Date: 05/10/2010
  *
  */

  SerializableAttribute public class RecordingUi extends form {}
      
  saving Boolean private volatile;
  Private player _player;
  Private RecordControl _recordControl;
  private VideoControl videoControl.
  private OutputStream outputStream = null;
  SocketConnection Private SqlConnection connection = null;
  Private boolean started = false;
  videoField private sector;
  Private boolean backLite = true;
          
  int i;

  public RecordingUi() {}
              
  Super (NO_VERTICAL_SCROLL);
  this.getMainManager () .setBackground (BackgroundFactory.createSolidBackground (Color.BLACK));
  setTitle ("video");
  i = 0;
                  
  ToolBarMenuButton.AddMenuItem (new StartRecording());
  ToolBarMenuButton.AddMenuItem (new StopRecording());
  addMenuItem (menuItem);
  {if(backLite==true)}
  new BackliteThread (m:System.NET.HttpListener.start ());
  }
  }
          
  private class BackliteThread extends Thread {}
            
  int i = Backlight.getTimeoutDefault ();
  int j = 1;
  public void run() {}
  do
  {
  If ((Display.getProperties)
  (& Display.DISPLAY_PROPERTY_REQUIRES_BACKLIGHT). = 0)
  {
  Backlight.Enable (true, I);
  }
  try {}
  Sleep (i);
  } catch (InterruptedException e) {}
  e.printStackTrace ();
  }
  I have = Backlight.getTimeoutDefault ();
  } While (backLite == true);
                  
  }
              
  }
          
  private class StartRecording extends MenuItem {}
              
  public StartRecording() {}
  Super ("Start recording", 0, 100);
  }

  public void run() {}
  Try
  {
  VideoRecorderThread newRecorderThread = new VideoRecorderThread();
  newRecorderThread.start ();
  } catch (Exception e) {}
  ErrorLog.addMsg (try ());
  }
  }
  }
          
  Class menu item to stop recording
                  
  private class StopRecording extends MenuItem {}
              
  public StopRecording() {}
  Super ("Stop recording", 0, 100);
  }

  public void run() {}
  try {}
  If (record! = false)
  {
  new StopThread (m:System.NET.HttpListener.start ());
  }
  } catch (Exception e) {}
  ErrorLog.addMsg (try ());
  }
  }
  } //End of the Stop Menu item
          
          
  Class for initialization of player and video recording and setting the Socket connection

  private class videorecorderthread extends Thread implements {PlayerListener}
              
  public void run() {}
  try {}
  Connection = (SocketConnection) Connector.open ("socket://192.168.1.86:1234;deviceside=true",Connector.WRITE,false);)
  outputStream = connection.openOutputStream ();
  _player = javax.microedition.media.Manager.createPlayer ("capture://video?encoding=video/3gpp&mode=standard");
  _player. Realize();
  _player.addPlayerListener (this);
  videoControl = _player.getControl ("VideoControl") (alarm);
  {if(videoControl!=null)}
  videoField = videoControl.initDisplayMode (Field) (GUIControl.USE_GUI_PRIMITIVE, "net.rim.device.api.ui.Field");
  }
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}

  public void run() {}
                             
  try {}
  _player.prefetch ();
  _player. Start();
  ErrorLog.addMsg ("player State =" + _player.getState ());
  Add (videoField);
  _recordControl = (RecordControl) _player.getControl ("RecordControl");
  _recordControl.setRecordStream (OutputStream);
  _recordControl.startRecord ();
  {if(Started==false)}
  started = true;
  Add (new RecordControlScreen());
  }
                                  
  } catch (Exception e) {}
  ErrorLog.addMsg (try ());
  }
  }

  });
                     
  record = true;
                      
  } catch (IOException e) {}
  ErrorLog.addMsg (try ());
  }
  {} catch (e MediaException)
  ErrorLog.addMsg (try ());
  }
  }

  ' Public Sub playerUpdate (a player, event in the chain,
  EventData Object) {}
  ErrorLog.addMsg ("Eventdata code" + eventData);
  ErrorLog.addMsg ("the event deliverred" + event);
  }
            
  } //End of wire recorder
          
          
          
  /*
  Stop thread to stop recording and frees the resources
  * Date: 05/10/2010
  *
  */
          
  private class StopThread extends Thread {}
              
  public StopThread() {}
                  
  If (_recordControl! = null) {}
  _recordControl.stopRecord ();
  ErrorLog.addMsg ("inside the wire of the judgment");
  try {}
  _recordControl.commit ();
  _player. Close();
  outputStream.close ();
  deleteAll();
  Connection.Close;
  record = false;
  started = false;
  backLite = false;
                           
  } catch (Exception e) {}
                          
  ErrorLog.addMsg (try ());
  }
                     
  }
  }
  } //End of off wire
        
      
  /*
  * Class of UI elements and display chat messages
  * Date: 05/10/2010
  *
  */

  class RecordControlScreen extends VerticalFieldManager {}
          
  See Boolean;
  Byte [] data;
          
  HFM HorizontalFieldManager;
  VerticalFieldManager value for money;
  EditField cat;
          
  onPlay private bitmap;
  offPlay private bitmap;
  onStop private bitmap;
  offStop private bitmap;
          
  Private BitmapField play;
  Private BitmapField stop;
          
  public RecordControlScreen() {}
              
  ErrorLog.addMsg ("inside RecordControlscreen");
              
  onPlay = Bitmap.getBitmapResource ("onPlay.png");
  onStop = Bitmap.getBitmapResource ("onStop.png");
              
  offPlay = Bitmap.getBitmapResource ("offPlay.png");
  offStop = Bitmap.getBitmapResource ("offStop.png");
              
  display = false;
  data = new byte [1024];
              
  HFM = new HorizontalFieldManager();
  VFM = new VerticalFieldManager();
  Cat = new EditField();
              
  play = new BitmapField (onPlay, BitmapField.FOCUSABLE |) ButtonField.CONSUME_CLICK) {}
                  
  protected boolean navigationClick (int status, int time) {}
  ErrorLog.addMsg ("inside the click of button");
  play.setBitmap (onPlay);
  Invalidate();
  try {}
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
                                  
  public void run() {}
  try {}
  ErrorLog.addMsg ("inside the run method of the click on the button");
  RecordingUi.VideoRecorderThread recorderThread = new VideoRecorderThread();
  recorderThread.start ();
  } catch (Exception e) {}

  ErrorLog.addMsg (try ());
  }
                                          
  }
  });
                              
  } catch (Exception e) {}
  ErrorLog.addMsg (try ());
  }
  super.navigationClick (status, time);
  Returns true;
  }
                  
  protected void onFocus (int direction) {}
  this.setBitmap (onPlay);
  Invalidate();
  }
                  
  protected void onUnfocus() {}
  this.setBitmap (offPlay);
  Invalidate();
  }
  };
              
              
              
  stop = new BitmapField (onStop, BitmapField.FOCUSABLE |) ButtonField.CONSUME_CLICK) {}
                  
  protected boolean navigationClick (int status, int time) {}
                      
  stop.setBitmap (offStop);
                      
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
                              
  public void run() {}
  ErrorLog.addMsg ("inside the run method of the click on the button");
  RecordingUi.StopThread stopThread = new StopThread();
  stopThread.start ();
  }
  });
                      
  Returns true;
  }
                  
  protected void onFocus (int direction) {}
  this.setBitmap (onStop);
  Invalidate();
  }
                  
  protected void onUnfocus() {}
  this.setBitmap (offStop);
  Invalidate();
  }
                  
  };
              
  HFM. Add (Play);
  HFM. Add (Stop);
  VFM. Add (CAT);
  Add (VFM);
  Add (HFM);
  }
          
  } //end of RecordControl Ui screen
      
      
  public boolean onClose() {}
  new StopThread (m:System.NET.HttpListener.start ());
  If (_player! = null) {}
  _player = null;
  backLite = false;
  _recordControl = null;
  videoControl = null;
  }
  Return super.onClose ();
  }
        
  Menu item to find errors
          
  MenuItem menuItem = new MenuItem("Errors",110,110) {}

  public void run() {}
                  
  UiApplication.getUiApplication () .pushScreen (new ErrorLog());
  }
  }; End of the Menu item
          
              
  }

  It worked. There were a few problems with my Simulator

• Update of the applications of "Apply" blackBerry Smartphones does not work

  I have a Blackberry Storm.  In the desktop software, I select the Application Option.  In the screen of the Application it says that I have to update the kernel.  I select it.  When I press the button 'apply' nothing happens.  When I get the desktop software it tells me that I have not updated all my applications.  Why the 'Apply' does not work?  Desktop Sotware is 6.0.1.18.  I use Windows 7.

  I really don't think worries of Blackberry.  I know not why this Forum exists since Blackberry doesn't seem all repair, place on it.  I don't know that they read all this.  I sent the following to Verizon to convey my feelings ONLY.  Verizon put me right back in the loop of Blackberry Web.  Hope you have better luck.  I'm heading to another provider.

  __________________________________________

  To Verizon:

  First of all, I don't need help. I send you just at this address because I have no idea who to send it to who would care. Last year, I bought a Blackberry Storm at Verizon Wireless and to this day, I hate it.

  I'm just a lonely individual (NOT corporate) and by looking for any kind of help, I determined as soon as they don't care unless it is company.

  I have all the typical problems of the Blackberry plus many other problems. Some problems have been on the Forum and never resolved.

  Here are the problems that continue with my phone:

  -Constantly having to pull the battery to recover memory.

  -Battery requires a draft because of many blockages.

  -Request for changing the settings of Blackberry have nothing change.

  -Alerts such as alarms and applications ringing with no way to silence (all ALERTS OFF).

  -Voice dialing does not recognize name if the contacts name.

  -Applications to the daily updates.

  -office takes forever to connect.

  -office says that it is a necessary kernel update that cannot be selected for the update.

  -No way to search in the calendar.

  -Too little Blackberry allows applications to exist on the device.

  -Phone OS has never had an update to fix anything (that I know).

  -Touch is impossible!

  Again, I DO NOT ask for help. I want someone to know RIM, why I, like many other non-corporate people, will move to the iPhone when my contract on the Blackberry is up this coming June. If RIM maintains this, companies will soon do the same.

• HP compaq 6530 b ethernet does not work

  I have a laptop hp compaq 6530 b. A few days ago, I installed it for the first time Windows, in particular Windows7 Ultimate 64 bit (I used Ubuntu). Since the ethernet connection installation does not work (so that wireless gives no problem) although I installed all drivers HP hp websites...

  Can someone help me?

  Thank you

  Ciao,.

  You can go back and enable this setting. I assumed that you had installed the drivers.

  LAN save mode power turns off your wired ethernet card to save battery when it is not connected to an ethernet cable.

  People get alarmed when they don't see the wired ethernet controller, which is listed in Device Manager when there is no cable connected, and they think their wired network adapter is defective.

  When you disable the LAN power save setting, always wired ethernet controller is on and remains visible in the Device Manager if a cable is connected.

  Now in regards to the pilot, you must...

  It can be found on the link below.  Select windows 7 x 64 driver file.

  http://www.Broadcom.com/support/ethernet_nic/netxtreme_server.php

  Paul

• Calling a Flex action when you display a view html Bridge does not work

  Hello

  I have a second question.

  Our plug-in displays a view of the hosts using the html bridge code.  When our view is active and the user

  call the context menu in the Navigation on the left - and attempts to perform an Action (for example: Host disconnect).

  the container (IFrame) in which appears our point of view, is made to have a bright white background, and the action does not work

  work - no dialog boxes don't start or anything like that.

  Is there anything I can do to prevent this?

  Thanks for some tips more

  Cathy

  Hi Laurent,.

  I made a Plugin Acme - it does nothing except show a label and a text.  Then I added this to my plugin.xml for a host.

  The first photo shows just the plugin at the beginning.  Then I call the contextmenu - and select "Disconnect" - the third watch

  what looks like the view, and it's normal 'disconnect' are you sure... box is not running...

  But I noticed that I use the sdk 6.0ga - so maybe I should try with update 1?

  But for our production, we use the sdk 5.5, because it must operate on 5.5 as well.

  I also tried another host of Actions, such as alarms-> new alarm definition - but that works properly.  I don't know what could be the difference.

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• Open the link behind Mail does not work

  Sierra using my link opened behind Mail does not work. The link opens on the top of the window.

  This option works for me in Sierra... is working for you with your previous version of the OS?

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• Contact ID does not work after update iOS10.0.2

  http://www.Macworld.co.UK/how-to/iosapps/iOS-10-troubleshooting-tips-3646690/

  Troubleshooting iOS 10 tips: Touch ID does not work

  Some users have reported that a previously happy Touch ID installation stopped working when they made the update to iOS 10. It is a pain, but rescuable - you will probably need erase your fingerprints and re-enter.

  First, however, try something simpler: go to settings > Touch ID & password, enter your password, then press the buttons next to pay Apple and iTunes and App Store so that they become white. Turn off your iPhone and turn it off again, then go back to settings and turn the two knobs back to green (you will need to enter your password Apple ID).

  Who fixed the problem?  I haven my Aff!

  If not, go through the fingerprint stored in settings > Touch ID & password - press each of them in turn - then erase fingerprints. Then go back and press Add A digital footprint and put back them in. It's a bit complicated, but it should fix the problem.

  I did all that, but the problem could not be solved.

  Try the following steps:

  1. go in the settings, press button ID & password, enter your password. Then turn off iTunes and App Store. Restart your iPhone or iPad. Return to Touch ID and password in the settings and re - turn on iTunes and App Store. Press Add a fingerprint to add another print.

  2 remove and re-add fingerprints: settings > Touch ID & password > enter your device code > scroll to find fingerprints fingerprints. Press the fingerprint, that you want to remove, and then press DELETE.

  3. restart your iPhone by pressing and hold the Sleep/Wake and home.