HP compaq 6530 b ethernet does not work

Similar Questions

• Laptop Compaq CQ58: LAN Ethernet does not work after the upgrade to windows 8.1

  After the upgrade of Windows 8 to 8.1, my Ethernet LAN is no longer in effect. Wireless LAN connectivity is OK. I run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I don't see a listed 8.1 for the LAN Ethernet driver.

  It seems that you encounter the same problem, I did when I ran the free preview of the W10. I had this error on the card reader.  I have no idea how to solve this problem.

  Is there is no ethernet controller needing drivers in Device Manager, then it is probably the realtek lan adapter that has the number 12 of the code, or it is part of the motherboard that controls the ethernet adapter.

  If you need Atheros bluetooth driver, then this is probably the one you need.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_127984_1

  Unfortunately, I won't be able to help you with question 12 code or ethernet.

  IMO, they are insoluble.

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Z460, Ethernet does not work after wakes up after hibernation

  Hi, I used Ideapad Z460 for nearly 3 months. I have this problem. Ethernet does not work after wakes up to the top of hibernation. I have already updated the bios to the lates version (release date: 14/02/2011) but still this problem. Someone has an idea?

  Thanks for reading!

  try reinstalling power management, the default settings of the bios and also try this:

  Right click on my computer > manage > device management > network cards > select ethernet adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

• Driver Realtek 8103e does not work under Vista (DV4T), ethernet does not work

  I got a new motherboard under the vices, but now the ethernet does not (rj45).  I tried several drivers of other work say but it isn't on mine.

  Included are version 8/20, 9/21 and 1/24 (dates or latest codes) everything has been loaded at the front desk.

  I have the icon and when the cable is unplugged shows red X, which disappears when reconnected.

  Anyone have an idea when else I can do?

  I can't understand how a company like HP sends a non-working back unit after repair.

  If you had any driver installed for Ethernet before installing what I gave you...

  Then uninstall them all and also this driver which I gave you.

  Restart the system and reinstall this driver from me.

• Compaq cq20 205tu - headset does not work

  I just bought this laptop 3 days ago.

  the speakers are ok, but when I tried to listen to music using a headset, it doesn't! I went to the portion of sounds in the control panel to check if my headset does not work. He says he works. to check this further, I used the option "test" of the computer. I heard the beep on my left and right ears. but when I try to listen to music and watch videos, only the speakers are workin, NOT my headphones.

  Please do help me. I don't really know what to do.

  Thank you!

  I think that you have Vista.

  Looks like your earphones must be defined for the playback device by default because your speakers are still to play the audio.

  There is a white speaker icon in Vista right next to your clock, rightclick it choose the playback device and you will see the window come in the middle.

  Normally the speakers to be on speakers with the green check mark.

  If there is a category for headsets or USB headphones and told to work then you must right-click on your helmet and choose set as default playback device, then apply, ok and restart the computer.

  Try this.

• RE: Compaq Presario 732US, NIC does not work after upgrade to Windows XP SP3

  Yes, it's an old.  Compaq Presario 732US - care.  <>

  OK reformatted to give to my sister.  Had to manually installed Windows XP SP2 because the verson reformat is so update the old windows would not work with her.  After graduating on windows, update was very well and made a 140 update article.  Installed everything fine.  restarted and did windows update again and it came with SP3, which has installed fine.  EXCEPT after restarting, my network card went caput.  Said my ethernet is unplugged little matter what I do.

  So I unplug and put in another computer without touching anything and it works fine.  So the problem is with the Compaq Presario 732US.  I guess that I need drivers compatible with Windows XP SP3.

  Any idea where I can get them for such an old laptop?  Which ones to get? If I should take off just SP3 and not to date him? And if the pilots there was even the answer?

  Thank you in advance to any of you out there who can help meh.  :-)

  Try to use Device Manager, right-click the network card and choose uninstall. Restart the laptop to see if XP can install a working driver.

• My ethernet does not work. Is this due to a recent security update?

  I've seen complaints (reddit, macrumor.com...) that recent security

  Update "031-51913 Kernel Extension incompatible data setting 3.28.1"

  has 'broken' my on my iMac ethernet connection 2015 later. I decided to buy this machine

  later the 2/26 because my iMac model equipped with mid-2009 seems to be dying, he

  lost its ethernet connection in the afternoon. OFF to Best Buy. The new machine put in place very well, but on 2/27,

  It was suddenly unable to ethernet. Maybe bad software system killed them both! Comments, advice?

  If you read this post, you will see there is a fix you can download.

  Re: Ethernet not working only not with El Capitan

• Acer aspire 6530 card reader does not work

  computer does not recognize built in card reader

  computer does not recognize built in card reader

  That Acer made in order to help you resolve the problem you are having with their system that led you to come here - it has the material form or a hardware device driver problem?

• Nine computer Compaq 610 laptop charger does not work. Help, please!

  I went through 3 Chargers and charger port repair.  I am so confused about why not charging my phone.

  My first broken charger comes out of usury, but he had to stand on a corner charge.  I really want to continue to use it so I help him on an angle so he could load.  It ruined the port and the charger completely.

  The second charger, I bought was from Hong Kong on eBay, I know your probably thinking that wasn't a smart move, but he had the right replacement part number it is said on the first charger.  This charger was incredibly hot but he quieted worked for awhile.  Finally one day rubber melted and was all dealt with.  It melted if bad it was bad to get the magazine back in the port, but I got it.  Then after that use more rubber would melt it got warm every time and once the charger would not come out.  I pulled it out with a lot of force and then the final piece got a little separated from taking part.  Then the charger now must be held in hard and a slight tilt to make it work.

  I bought a new one with the right part number and it seems to be smaller than the three other broken.  I just plugged it in for the first time a few minutes ago and it started to load perfectly for about 20 seconds.  I was so releived, until I checked a second time and he stopped to load!  I don't know why, but it is not only in charge at all!  I plugged again many, he waved a little and tried to take the battery out and then try to turn on my laptop.  But no matter what I do it still will not charge.  Is the most funny thing is that the old one can still.

  I called HP to help and the talker suggested using "active chat" online with them.  He can't have my phone so I can't speak for them.  I tried FAQ and reading the forums of other people, but nothing helped.

  Can someone tell me why on earth that keep breaking all shippers of m.  Even though I bought a new and my laptop reparied it still broken.  I treated the new one with a lot of care.  Can someone also tell me why there is a new not work and why is the old man?  The problem with my computer laptop port battery etc or is it just the charger?  If I did not explain something correctly, or you need more information and where I bought things and my laptop and charger specifications and details please ask and I will tell you in detail.  This forum post is one of my last hopes.  Please if you cannot resolve the problem yourself at least guide me to who or where I could get help from.

  If you have read all this I thank very you much for your help and please if you have any information to tell me.  Thank you regarding any future assignment.

  I have no idea why, but I changed the portion of the charger that goes into the wall with the former and it started to load!

  Thank you for answering anyway, but it was not the port.  Yes, he finally goes to work now! YAHOO

• WiFi works but Ethernet does not work

  I just changed the ISP. I use the modem cable of the MRC, which is the same as one that uses Xfinity. I'm also using a Linkysys EA4500 router. I have not had any problems with setting up yesterday before they changed over this morning.

  I have two iMacs (my wife and I). If the modem cable is directly connect to one of the two iMacs, the internet works fine. However, when the Linksys router is part of the configuration, the iMac to my wife can connect via the Ethernet port but my iMac won't. My iMac can connect via WiFi. However, he won't be able to connect if I use an Ethernet cable.

  I have already reset the router to factory setting and restart the iMac and clear the PRAM, switched Ethernet cables. What happens here?

  The problem you describe will occur when changing the device connected to a modem cable without having to reboot the cable modem. Cable modems that are not as routers will communicate with a single device and refuse to connect to what anyone else, until you cycle power.

  Turn off your modem cable NCR and leave that it turned off. For reasons I don't understand (and will may not be not necessary), some cable ISPS also recommends disconnect physically their coaxial cable modem to perform a reset "full." During this time you can turn off the Linksys router also. Connect the iMacs to the router, either its LAN ports, via an Ethernet switch directly. It is not necessary to turn off Macs.

  Wait a few seconds, then reconnect the cable to the modem if you disconnected and turn on both the modem and the router. It should work.

• Ethernet does not work even if it is plugged.

  My laptop recently stopped to connect to the Ethernet connection, even if the cable is connected and working (I know it works because my Xbox One is on the same network, and it works very well.) It only shows that the computer is not connected to the internet, and the problem of troubleshooting help not at all. The wifi still works completely fine. Y at - it an easy way to solve this problem, or is it a hardware malfunction? Thank you!

  Hello

  1 did you do changes on the computer before the show?

  I suggest that you try the procedure described in the article below.

  Method 1:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Method 2:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Compaq Presario V3118AU Internet does not work after update BIOS and Broadcom Wireless Driver!

  I posted here yesterday on my computer because I have updated the Bios program with the update of the BIOS of 2007 and after that my internet no longer works.   The advice I've gotten is update Broadcom driver wireless as well as I did yesterday but the same result.    I was told also that if all things go wrong can I downgarde my Bios program that imposible because the older version on my computer model page is actually installed now on my computer.  I have run out of idea already of what else could be done please help.    Sometimes wireless connection to connect to the router but often difficult and if I am connected I can't go to the internet and to connect to the Local network I just get limited connectivity.

  Can someone please tell me what to do to solve this problem.

  Thank you very much!

  You are welcome. Let us know how it goes.

• WIFI does not work in Compaq 15 - s006tu

  Recently, I brought Compaq 15-s006tu WIFI does not work and the function keys do not work.

  Cannot find the drivers. Please provide the URL to download the software below.

  WIFI

  Bluetooth controller

  Netwrok controller

  PCI Simple Communication controller

  SM Bus controller

  Thank you, cedric

  Hello:

  Below are the links to the wireless and bluetooth drivers you need...

  Wireless:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_133279_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  ATY

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_130390_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Upgraded to Windows 7 and then downgraded back to Vista - ethernet not working, pilots it but says error Ethernet does not, code 10

  My computer is a Vista desktop Dell Vostra.  I've upgraded to Windows 7 and did not like (a lot of my programs wouldn't run well on it) so I tried to demote him back to Vista.  Now my ethernet does not work.  The drivers are there, but he says won't work, code 10.  How can I fix it?  I can't solve the problems on the computer, because I have no network.

  Hello

  go to dell and get the latest drivers for vista for your machine using one, you're on to get here

  Save the drivers for the flash player and then transfer them

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen