Audio AV is not play
Hi friends & Sony Support,
There is a specific audio video file, in which the video on Xperia Z2, but there is no sound. I tried the default video player and also the player of MX. The format is as below. Appreciate if Sony support could confirm, is the Audio Codec only is not supported on Xperia - Z2:
Format: AVC
Container: Matroska (mkv)
Resolution: 1920 x 816
Frame Rate: 23.976 fps
Aspect Ratio: 2.35
Video codec: X.264
Audio codec: DTS - HD [{MY / Core} @ 1510 Kbps 6ch]
Thank you
sLn
keep us updated.
Tags: Sony Phones
Similar Questions
-
Audio files do not play in my windows media player?
Why my audio files do not play through Windows media player?
Hello
Have you recently installed another player?
Right-click on taskbar - Task Manager - processes and see if WMPlayer.exe is already hidden.
If the end then on her process.--------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html===============================
Determine if 32 or 64 bits.
Start - type in the search box-> Winver find upstairs and double click on - check version
After that the foregoing, add codec - get these 32 bit if:
-Free - CCCP also get free tool of insurgents
http://CCCP-project.NET/
http://www.freewaregenius.com/2007/02/09/CCCP-codec-pack/FFDSHOW - free
http://sourceforge.NET/projects/ffdshow/Check here:
Plug-ins for Windows Media Player
http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx============================================
============================================If 64-bit:
Read this 1st and go that route, or use the one below.
http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html
--------------------------------------------------------------------
If 64-bit Vista - can run WMP in 32 or 64 bit mode.
Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.
For 32-bit use these - OR those listed above that I prefer.
K - Lite Codec Pack 5.0.5 & K-Lite Codec Pack 5.0.5 update
http://www.codecguide.com/Use them for 64-bit:
K - Lite Codec Pack (64-bit) 2.6.0
http://www.codecguide.com/-------------------------------------------------------------
You know that you use WMP 32 or 64
Change, change or set 64 - Bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default
http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/--------------------------------------------------------------
Have you recently installed another player?
Reset your associations:
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
How to associate a file Type of Extension to a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.html-------------------------------------------------------------
VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.
VLC - free
http://www.videolan.org/VLC/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Audio clips do not play back on the new devices from Apple and Android
Hola,
Successfully exported and load a video on youtube. Unfortunately discovered audio excerpts do not play back on latest Android and Apple devices, but being of other clips.
It doesn't seem to be any rhyme or reason. a lot of audio tracks, but I only have a problem with the two voices. and select clips on the two tracks do not play back - it's not all one and nothing on the other hand, some play, some don't.
video and audio play fine on most devices and computers, but on a privileged few, these audio clips are missing.
PP CS6, exported in h.264 mpeg file. audio is uncompressed 16-bit.
Help.
Florian
I don't know if it's kosher to answer your own questions. Understood that after about 4 hours of troubleshooting...
reduced to all THE AUDIO CAPTURED on a PARTICULAR DAY.
in figures, this bad paired audio audio the other day who played back fine: wav 48 kHz, 16 bit,.
found a thread (http://www.videomaker.com/forum/topic/audio-channelscancelling-each-other-out) that mentioned stereo audio where one side is out of step with each other, when read by a mono speaker (some apple and android devices, but not all) it will cancel out (can still be heard, soundtrack and effects). When reading through the headphones or stereo speakers, you can tell that she is out of step. Something trying to convert the stereo signal to mono cancelled the progressive audio funny.
My dose was hard pan the audio tracks, solo, export only one mono aac audio, re - import the sound signal of a new track, and I settled for the mono voices above.
hope this helps-
-Yes, thank you-
-your welcome
-
Hi, what is the red/green arrows for audio that will not play on my calendar?
Hi, what is the red/green arrows for audio that will not play on my calendar?
This icon means that the media is offline. There should be a little 'offline' next to it.
This ARTICLE goes into detail on what can cause media offline and give some advice on fixing things.
Here's a look at the project Panel, showing that the icon and the "Offline."
Good luck
Hunt
-
audio files do not play sound after the restoration of the links
I recently moved to a project from one disk to another.
When I opened it the project folder I had to recreate a link to all the media which seemed to have a lot of success. However the audio files do not seem to play any sound. When I tell one of the audio files in the finder window, it take me for an alias file. When I try to open this file, it indicates that the original file cannot be found.
I tried to remove the entire library of files sound and re-import them back in. But still, it does not solve this ridiculous issue.
Any suggestions?
Thank you
Karl
Are music protected audio files?
Russ
-
Audio CD does not play in another device, only on the computer
Reading
I burned 3 audio cd using Windows7 Media Player, on a HP G62-340US laptop, I can play them on the laptop, but they will not play in stereo in my car, any ideas why not?
Not all no PC function CD player will play CD that have been burned on a PC - they will only play those commercially pressed. Consult the manual for the CD player in your car for more compatibility information.
Make sure you CD has been written in a format that your car CD player is the best chance to play - mp3 is probably the most common.
-
The puppet, live animation, audio tool is not play - why?
Why doesn't my audio file plays when I press command so that I can animate a puppet according to my audio file? I watched almost all the tutorials on the puppet tool, and if they say anything, there: just press 'command' and the noise will automatically play. This isn't. : (
Thank you...
Let's see if I have this version somewhere
You can install any version up to CS6 CC at the same time. This capability is included in your subscription
How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team
That's what I do. It is a part of my office
Thanks to press for a response. This way other users will find this fast. I actually wasn't aware of this bug, and it allows me to say to my students this puppet record with audio playback does not work in CC2015 or CC2015.3 If you have been helpful to me. feel free to mark the correct answer while others will quickly on this subject
whenever you feel you have double-checked and nothing else works, you can come here or other communities Ae and support. It is what is wonderful in this community - users to help each other. I used a number of other software and I have never seen such a vast and solidarity as the Ae community can offer.
-
Audio video will not play on the timeline
I use Adobe After Effects CS5.5, whenever I have a video in the timeline, it will play the audio of the video. Even if I scroll or a preview, the audio will not play until I made out. How can I fix?
How do you do a preview? If it's with the space bar, you're hurting.
You start an audio overview by pressing. on the number pad and you launch a RAM Preview (including audio) by pressing 0 on the numeric keypad.
Looks like you're new to AE. You will need to take a step back and Start here.
-
HTML5 content published from Captivate 7 including audio slide do not play audio in the DPS overview
I added 5 HTML contained in a publication of DPS that I created in Indesign CC. When I saw the content on my desktop I do not play audio when the Insider. The content, but without audio. is this normal? I cannot publish to a device right now and am just trying to figure out if I'm doing something wrong.
There is no substitute for testing on a device.
-
Last approximately 10% of audio clips do not play
My imported songs will not play the last 10% of the clip. At first I thought it was a result of trying to use clips from 6 to 10 minutes of music, like 1-3 minutes titles seem to never fail, but could not find this same cut out all but the last minute of a long clip (do a 10 minute clip in a two minute clip) and try to use has resulted in his last 10% plays do not!
The waveform for each audio clip is displayed in the Source tab and is fine. But rub or play the clip works only until the point 90% and then sound becomes silent. This is true to the Source drive or when the audio is inserted into the timeline.
I have converted the original .m4a to mp3 and wma audio files, but always with the same result. All the clips of converts play in QuickTime and WM player players, so it's something within Pro CS4 Prime Minister himself who is a failure.
I tried everything I can think without results and have run out of ideas.
Any suggestions, anyone?
I would like to convert these source files to PCM/WAV 48 kHz 16-bit format and import it into the project. PrPro should love these files and you should have no problems. You must specify PrPro moments to conform to these files until you make slide them on the Timeline (progress bar for consistent standard in the bottom right of the GUI). It should take only moments with these files (duration and your system will dictate just how long), and you might not even see the progress bar.
Good luck
Hunt
BTW - how you convert? Soundbooth or Audition can do easily, as well as free Audacity.
-
Satellite P-25 Audio CD will not play
Hey guys,.
Looking for a little help. I have a Toshiba Satellite P - 25 series. My drive will read DVD and CD-ROM discs, but does not recognize audio CDs. I get an error message that says that there is no disc in the drive. I have rolled back the driver but still have the same problem.
Any suggestions?
Thank you!
volsfan458Hello
1. right click on the drive and choose Properties.
2. Select the Hardware tab, select the drive and press the properties button.
3. choose Properties tab end toggle the option activate the audio CD Digital for.Check if, after this procedure, you are able to play audio CD
-
I recently bought bike G 3rd Gen which has Lollipop 5.1.1 installed. Files adudio played smoothly at that time. After a month I received the update for 6.0 Marshmallow, then I updated for it. After that, I noticed my audio files most is not read by most readers of the music. I don't know what the problem is, but you have any help. I have 2 GB of RAM
What kind of file is it? Have you tried safe mode? Have you tried a reset? Are these music files? They are available to the public for the third test? What music players have tested?
-
Burned Audio CD does not play in car only PC
Burn an Audio CD
When I burn CDs of music it will only play on pc and not by car... How can I fix it I'm running Windows Vista
When I burn CDs of music it will only play on pc and not by car... How can I fix it
When you insert a new CD, the system will first do the formatting. If you look at it, you will see formatting options: format file system of life and the ISO image format.
Extract to burn a CD or a DVD. Source: http://windows.microsoft.com/en-US/windows-vista/Burn-a-CD-or-DVDChoose the size of the ISO image when you need a highly compatible disc that will play in computers with an older windows version or in devices such as CD and DVD players that can play video files and music digital. For more information about choosing a disc format, seewhich CD or DVD format should I use?
t-4-2
-
Audio file will not play on the server
Hello
I incorporated an audio file on a page. it plays perfectly well in any browser I use to preview, but when I put the page on my server, the playback controls not displayed, only the logo of quicktime appears. url: http://www.doctorastronomy.NET/amateurastro/SunTube3.html
Thank you
Dave
DWFAQ.info wrote:
You don't need Quicktime to play the mp3, but you need Flash player to play flash.
QuickTime, iTunes, RealPlayer, etc... You can read some MP3s if you have a drive installed and the file type is associated with the default player and that the browser has the plugin necessary to launch the player. It's a lot of 'ifs. '
Flash is easy because almost everyone has already.
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
www.Alt-Web.com/
www.Twitter.com/ALTWEB -
Burned to disc audio files do not play
When the CD burning via windows medis player 11 after about 8 songs recorded cd gets staticy and doesn't play anymore. even if the cd recorded 15 songs recored. Help?
When the CD burning via windows medis player 11 after about 8 songs recorded cd gets staticy and doesn't play anymore. even if the cd recorded 15 songs recored. Help?
Hello
Looks like the disc is dirty, maybe problems with the discs (cheap ones is rarely promos) so
Try a disc cleaner and slower burn speeds. Try format mastered instead of LiveFile.Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html=========================================
These could help you:
Burn a CD or DVD in Windows Media Player
http://windowshelp.Microsoft.com/Windows/en-us/help/30ffa641-B682-4315-8c7e-8a29f383a7131033.mspx
Burn a CD or DVD in Windows Media Player: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/51a88740-Abda-4144-9176-cec79cca31e81033.mspxBurn a CD or DVD in Windows Media Center
http://windowshelp.Microsoft.com/Windows/en-us/help/9ee6cb78-bd7e-4DE3-A154-82d40c4289e01033.mspxBurn a CD or DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/b47eb51a-ea6d-4d97-97b0-2d07a59316981033.mspx
How to burn an Audio CD
http://www.vista4beginners.com/how-to-burn-an-audio-CD
Burn a CD or DVD using Windows Vista - a video
http://www.YouTube.com/watch?v=0BwF60m05m8I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
Hello. When I was on the internet with previous Firefox, there was Trusteer report (j.4 Banking UK software: http://www.trusteer.com/) icon was still there. However after Firefox gave me an alart update for version 9.0.1 Mac OS x 10.6.8 today and aft
-
Despite my spell checker set, it does not in Hotmail and some other sites.
I have the setting for spell check set up, but it does not work on some sites like hotmail. I'll spell check button in hotmail and it tells me that my browser automatically checks as I type, but it's not. I tried to replace it or to get spelling chec
-
How to run code and to communicate between the computer and myRIO?
Hello I am trying to create a colortracker using the myRIO. The system is pan tilt servo with a webcam. The project works well and is able to follow and move with the desired color. However, in order to continue the project, I want to ensure the syst
-
Several times tried to download updates for Windows Live Sign in Assistant (KB967912) and it keeps fails with "error Code 646 Windows Update encountered an unknown error. It cannot find in the help or Knowledge Base. With the help of HP Pavilion dv
-
I have windows 7. I'm tired of popping up while I'm working on a windows program. For example, I open a new program, and while I'm waiting to open, I will continue to work in the first program. Then a new appears. The thing that I'm working it messes