Audio clips keep repeating!

Similar Questions

• Audio file keeps repeating using Winamp Media Player

  Don't sound

  As I've done millions of times before, and it froze on a moment of his, and he repeats to me, I played a song in Winamp.  As 1/20 of a second of the song, repeating endlessly.  I closed the program and the sound continues.

  Restart the PC should stop definitively the sound.

  You can also update your audio drivers to their latest version. Don't simply check Windows Update, but the site of the manufacturer of the sound card as well.

• Melted how audio and keep the audio level in clips later

  I have piloted PE 10.  When I add keyframes manually to fade audio output, or simply select the option ' fade out ' to fade at the end of an audio clip, the audio ends at the end of the clip and the audio of the following clips is to initial level.  This creates a large discontinuity to the noise level.

  What happens if I want to the next clip or clips to continue in the same faded audio level, rather than start at their original level.

  In Pinnacle Studio, for example, when you fade down audio, all audio to the right will be adjusted to match the level after the fade, as long as there are no keyframes forward of this final key-frame fade.  Now that I'm getting 10 EP, I'm bored of this behavior.

  In PE10, there is a sequence of keys which allow this behavior?

  If you have only one or a few Clips, where you want to reduce the Volume, I do so at the level of the Clip and simply adjust the fixed effect (appears automatically on all the audio Clips), and add keyframes to adjust the Volume.

  I find it easier since the effect controls panel, accessible by selecting the Clip you want to adjust, and then in the effects tab, choose Edit effects.

  Lets say you have a Clip, where the majority of the Volume is just, but there is a section where you want to turn it down. Go to where you want the Volume to start to get lower, add a keyframe (toggle ON keyframes), then go to where you want the Volume restore the main value and add another keyframe. At this point, nothing has changed, but you added two key frames, which "held" the Volume at the current level. Now, go where you want the Volume to its lowest, to the right of the first keyframe that we added. Add another. Adjust the level to this keyframe (now the second in the Clip) to what you want. Go where you want the Volume first on the rise, just before the second keyframe that you added (now third), and add another keyframe. Adjust so that it matches the Volume you settled in what is now the second keyframe. You will have four key frames: the first, one that keeps the Volume at the beginning of the Clip, the second, which allows to adjust the Volume to its setting, the third, which corresponds to the Volume of the second, then the fourth, keeping the Volume at the level of the initial until the end of the Clip. It will look like this:

  

  Some like to do the with the "rubberbands" Keyframing in the Clip itself, but I like the effect controls panel.

  In addition, keyframes that we added, are linear and if you want to adjust the Interpolation, the smoother changes just Rt-click on each keyframe, to adjust the Interpolation. Interpolation is a little abstract, so I suggest to read the help files on Bezier curves on keyframes.

  Good luck

  Hunt

• large file audio attachment sent by a friend keeps repeating and blocks all other messages, but mail gets through the interface of Yahoo on my iPod

  MP3 big unsolocited 8.9 MB file that is sent by a friend takes forever to download and then prevents any other messages being delivered. Once deleted keep repeating (up to about 10 times now! with the same result.) This does not happen on my Ipod that does not Thunderbird.I have disabled a filter that could have stopped this file but without result. Don't know if is my problem or their

  Any help gratefully received
  Best wishes

  Could you if you please that mark as resolved

• Impossible to play the audio clips on the site. Click - page breaks.

  I'm playing the audio clips, sounds, dolphins (several sites) online site. Example: http://www.dolphinencounters.com/family-dolphinsounds.php#

  There is a small icon of ear for each clip. When I FIRST tried to read a clip, I got a "Quick Time plugin crashed" at the top of the page. Tried several times, same result.

  I went to TOOLS > OPTIONS > Applications tab. Given that I did not know what type of file format / clips have been, I found ALL the entries related to QuickTime and select the default setting or a different type of player. Restarted.

  When I tried this time, I still have collision warning. I double checked to make sure that QT all apps have gone and DISABLED by the plug-in page QT Extensions. Restarted.

  This time when I clicked on the icon of the ear, no sound is played, but the page pops up.

  Checked the settings/sound engineer. All OK. Updated QT for the last 7 and updated version to update system. No sound, no warning, page a few jumps.

  Other applications in the system plays its OK. Able to play videos in line with the sound. Just the noise / icon does not work.

  I would like to hear AND capture/download the sounds of dolphins. What is the problem with my system/FF 12.0? How can I fix it? How can I download?

  I tried to read the link to the icon to see the type of audio file, so I could access the issue more closely, but all links of clip are still with no recognized sound file format. Example: http://www.dolphinencounters.com/family-dolphinsounds.php#

  There are several elements on the page, but the links are all exactly as above.

  It has been long and there are probably several versions of FF as well as earlier versions of Windows, I remember listening and capture of the audio clips. Just do not remember how I did at the time.

  Win7 64 bit, 12.0 FF, QT 7 plug.

  It may be the prolongation of the QT interval, because the problem persists with all Applications QT, deleted or not, everything seems fine. No trainer, etc. No warning.

  I tried using IE and played clips, but WITHOUT my click the icon; they played just in overview. See still no way to capture or download and know that there is one somewhere.

  Hey ccorazza, you did so well with my last, have a curtain call repeat for this one? Thank you all.

  Hey, GreyWolf, sorry for the late reply. Didn't see your message until today.

  I was unable to get sound to play on this page too, but I got confused because it's an old version and I don't want to upgrade to the new version of QuickTime. But I'll test it on another PC with a Quicktime update.

  But after checking the file type, sounds, I see that they are .wav files. These files are usually played by Windows Media Player. So check to see if you can set the type of .wav file in the Tools > Options > Applications tab for Windows Media Player. Restart Firefox to see if the new change works.

  Also, I could find the urls for the files Dolphin audio so you can download them:

  • http://www.dolphinencounters.com/sounds/whistle.wav
  • http://www.dolphinencounters.com/sounds/motorbike.wav
  • http://www.dolphinencounters.com/sounds/yelling.wav
  • http://www.dolphinencounters.com/sounds/foghorn.wav
  • http://www.dolphinencounters.com/sounds/scream.wav
  • http://www.dolphinencounters.com/sounds/Raspberry.wav

  You should be able to make links a right-click and choose Save the link under.

  How I found the links was I clicked on some empty page and chose to view the Page Source. A new window opens, I searched the word whistle then I copied the sounds/whistler.wav of the url part and added to http://www.dolphinencounters.com/.

  What other sites you have the problem with? I try to take a look at those and see if I can find a better answer for why this is happening.

• "Play-to' peripheral network keeps repeating same song

  When I move a group of songs to the play area on the right panel and select the menu item ' in play', my DLNA compatible AV controller is displayed. When I select it, a new window opens, and the first song on the list begins to play on the audio/video devices. Fine.

  The problem is that the song just keeps repeating. It doesn't matter if the 'repeat' control is enabled or disabled. I can click on any song in the list and he plays with happiness this song - again and again and more :-(

  If I select a playlist saved from the DLNA client, he plays very well and is not repeated. Unfortunately, I want to control the WMP device, not in the Panel of the DLNA client.

  Help appreciated.

  It's probably something that should be fixed by Denon. they have a support
  Forum and other users to have reported the same problem?
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Half of the media offline since yesterday; audio won't repeat the link

  First Pro 9.2.0 (build 41) - 10 Windows.

  I7 - 5820K 3.30 GHz, 32 GB RAM

  NVIDIA GeForce GTX970

  C: 256 GB Samsung SSD 850 PRO (System) full of 50%

  D: 512GB Samsung SSD 850 PRO (media) 30% full

  R: Western Digital Black full 4TB (archive) 20%

  Editing a sequence these days it is 720 x 1280 vertical. The project contains a wide variety of formats (designed especially mov) and resolutions on different cell phones of first year of my niece. Most were vertical if we put in place a vertical next there has been some quirks in so... but doing nothing great.

  After two days of editing this weekend without any problem, tonight I sat to change. I have two errors on a sequence in the draft resolutions or something that does not correspond to (I didn't write it because I do not think that it was important... Yes... stupid) and when the open project, half of my media is offline. The chronology is almost entirely red, including the A1 which is the piece of music.

  Ok. I'm newish to first, but I'm beaten avid for 15 years. I start by trying to recreate a link to media, it will be for the video, but gives the error message ' media mismatch: the selected file contains audio media used by clip references in one or several sequences. ". These references to audio clip will be deleted and cannot Ωtre annulΘe. Do you want to continue? " All files are intact on the drive media and play with audio from the Explorer. Import of deletes the audio, including the music mp4 file (the other clips are all .mov files). Offline files are sound information that disappears once relinked if the user clicks the message above through.

  Restarted. Checked the auto save projects. Same thing. Uninstalled QT (because my wife edits on this system and I thought she might have accidentally updated to a non-compliant version of QT). 7.7.6 reinstalled I read has been proven compatible with Windows 10. No change.

  We have just upgraded to Windows 10 Saturday, but the system worked flawlessly for about 6 hours of editing yesterday. Evening... I'm stuck. I would like ideas.

  Found the solution elsewhere.

  In case someone runs into it, just to create a new folder titled [ProjectName] _1 and copy all your media files, it. Open your project, using repeat locate and point it to the new location. Everything came right away online. Weird.

• Audio Glitch rendering repeat

  We encounter a glitch in our media out after our Premiere Pro CC 2015 recent update (installed on 12/16/15). Exported media will fill the empty audio portions with a repeat of the last 1.5 seconds of audio to a new audio clip in the timeline plays. I also feel the output media with an arbitrary amount of white images added at the end I checked the timeline to verify that it there was not 'straggler' hiding clips at the end. A video of 10 exported minutes to an hour and a half. We export both through Media Encoder and first.

  
  

  I had exported a movie 20 minutes before you install the update on my system in several formats without problem (MP4 H.264, MPEG2 Blu - ray). My colleague had already installed the update and is facing these issues to the export to the same file. We didn't know that the update might be the cause. So I installed the update later and am now noticed the same problems when I export files. We use the two new 2015 Mac, Yosemite and El Capitan.

  Assuming that it is a result of the update, I was wondering if anyone else has this problem. Otherwise, I guess it's more of a report that a question, unless you have a solution for me. Our temporary solution is to fill the space "dead" audio in the timeline with audio slugs low.

  Hi Chris,

  Sorry for your ongoing troubles. Workarounds sound very painful. I have raised this subject with the engineering team, and there is nothing that we can do it before the next release on this issue. Very sorry about that.

  All you can do is file bugs that you have, and I hope that things will go smoother for you in future projects. I hope to provide more information on how to avoid some of these issues and to streamline the process.

  Thank you
  Kevin

• Audio clips mp4 not recognized after upgrade to CC 2015.1

  Just upgraded to CC 2015.1 on a Windows 7 Pro workstation. A former CC 2015 project file opened yesterday, received an error message about missing a missing MultibandCompressorCore.dll, saved as CC 2015_1, did a few editig, seems ok, and smooth. But today many clips are offline, when I repeat the tracks audio and audio clips are not recognized (screenshot). When I simply import the clips of same, there is also no audio what either is. When I check under change clip audio channels are grayed out. When I play the clips via Quicktime or Windows Media Player all sounds is there. I'm lost in the darkness, silence, please help.

  

  

  Exact same file on another workstation (with the same characteristics). One with and one without sound? Import the same video in After Effects and Audion works like a charm, the fable is there. What I'm missing here? A first adjustment?

  

  I had the same problem. What I've done. 1 / I chose all mp4 files in Windows Explorer. 2 / I created a new folder very close to the original (s) 3 / I moved the clips (without the cfa and so on...) for the new records. 4 / premiere Pro will be automatically "relocate" the missing clips when you reopen the project. And now, they have audio too. I hope this will help.

  Best regards

• How to make the loop audio clips in the first or elsewhere

  HOW CAN I DO AUDIO LOOPING CLIPS IN THE FIRST OR ELSEWHERE?

  None of these answers are correct.

  My brother found this thread, looking for help and left in frustration, asking for the answer instead.

  Kevin Monahan response is only semi-finished.

  Here's the full answer:

  Looping a video or audio clip on the timeline, right-click and select 'nest...".

  Name the nest, what you please.

  Now, double-click on nested clip you just created. This allows to enter the nested sequence.

  NOW you can select the clip, copy and Paste several times. (Just keep hitting CTRL V, and the read head automatically moves forward to place the next clip.)

  Return to the main sequence.

  Now you can use the selection tool to extend this nest as much or as little as you like.

  It is a far superior method, because a nested sequence is a SINGLE ELEMENT that can be resized, given effects, moved, lengthened and shortened very easily.

• How can I make the audio clips 40 all the same volume?

  Hello, all!

  I finished a video for general guidance to new employees in the Yellowstone National Park and am close to be finished!

  I created the video in the first Elements 9 with some video footage and pictures still mixed.  (Yes, I tried to "Ken Burns" it... it laughing out loud if he saw my version!)

  I brought most to individual WAV format. clips that I've inserted into the audio editing under each video segment.

  I have about 40 audio clips, and even though I used a decent microphone, I still find that every clip has a slightly different volume that is really noticeable when the DVD-video play on TV.  I realize I should have made an effort to keep a standard distance of the mic when recording.   Hindsight is 20 - 20.

  I tried to change the volume on each clip to make them all the same volume, and it makes me a little crazy.

  Is it possible for me to grasp all the audio data at some point and make an adjustment that would make each of them the same volume?    I tried CTRL-A and then to 'normalise' on this topic, but it seemed to do very little / or no difference when viewing.

  Any advice would be really appreciated!

  Signed, the daughter of solitary creative video in Yellowstone.

  Thank you, Hunt!    I read the article.

  Have a great day.

• Duration of the slide show CS5 does not again refresh audio clip

  In a slide show, complete with 'Fit audio slideshow DURATION' checked (duration 00; 19; 32-24), I decided to replace the audio with a composition more short (00; 10; 00; 22). With the original audio clip erased and the new added audio clip and the 'slide show audio TIME Fit' checked, slide durations recalculated so that the last slide has a 00 exit point; 10; 00; 22 but the duration of the slide show is 'stuck' 00; 19; 32; 24. the end action takes place to return to the menu, but when the last slide goes black (at 00; 10; 00; 22) keeps him slide show running with a black screen, probably all the way to 00. 19; 32 24 before it hits the end action, even if I did not let it run again at this point. I shot 'Fit slideshow to audio duration' then turn it on again, in the hope that it will recalibrate at 00; 10; 00; 22, but the length does not change. Help, please!

  Try to play with these ideas:

  Uncheck "Fit to Audio duration slideshow."  (As you probably now it have anyway).

  On the slide show tab basic properties, set the duration of the slide to zero.  Now, what is the length of the slide show?  The length of the audio new or old?

  Or, something great (so I think that the total is more audio length) on the duration of the slide.  What is the length of the slide show?

  Search now "Fit slideshow / audio.  How long is it?

  I had the same symptom as you did (audio plays beyond the end of the blades) when the durations of slide added unless the audio length and 'Fit audio slideshow' was unchecked.

• Audio clip not ringing?

  I'm working in iMovie 11 OS 10.7.5.  I'm currently reviewing a film I did last year.  I needed to replace some of the imported videos.  These are originally midi clips I created in Garage Band and then became mp3s.  I put a couple of clips in the iMovie project, and they worked very well.

  But earlier, I imported a new clip and while he sits very well in the timeline (and I got the green sign that I was drag / drop '+'), it does not play!  In other words, everything seems as it should; but no sound when playback it travels.

  The noise occurs when I play the clip in iTunes, and it also works when I click the icon on the desktop of the clamp.  All other sounds in the movie play normally.  I checked all volume levels.

  Can someone help with this strange problem?  Thank you.

  Is it just the audio clip one who is affected?  (You don't cut accidentally the audio):

  

  or reduces the volume to zero.   It shows a waveform?

  Geoff.

• I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious.

  Hello.
  I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious. I can't find the settings as it eliminated. Now, I don't have any plug-ins and Add-ons strange that were not initially in the Fox, but the problem is there.
  I use the Fox years. The problem, he had 1.5 months after Fox cleaning. If the problem can't win, I'll be forced to give up the browser, and I wouldn't.

  Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

  If the problem persists in Mode without failure, could reinstall you Firefox in this way:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 38.0.5 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• I got a box on the browser top who wrote, you a message. The problem is that it keeps repeating that you a message. I don't want to hear it.

  I got a box on the browser top who wrote, you a message. The problem is that it keeps repeating that you a message. I don't want to hear it.

  It is a unsolicited announced to 'make' an I phone. I'm very tired of winning all that junk. I have certainly not ads want to talk to me now.

  You can do a check of malware with several digitization programs of malicious software on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked