Audio clip not ringing?

Similar Questions

• VIDEO and AUDIO CLIPS not COUPLED in TIMELINE

  I just noticed something in recent weeks, that my audio and video clips become couples in the timeline. But if I press alt + click selects audio and video clips. But a single click selects just the video or audio. I understand that alt + click was chosen, either video or audio to a linked file, it seems now vice versa.

  Can someone explain where I am mistaken here? Is this something to do with track targeting which I am not understand?

  Hi Srukweza,

  Shadreck Rukweza wrote:

  I just noticed something in recent weeks, that my audio and video clips become couples in the timeline. But if I press alt + click selects audio and video clips. But a single click selects just the video or audio. I understand that alt + click was chosen, either video or audio to a linked file, it seems now vice versa.

  Can someone explain where I am mistaken here? Is this something to do with track targeting which I am not understand?

  Looks like you have deselected the selection bound function. Click on the button of the timeline show the screenshot and see if the selection bound has returned.

  

  Thank you

  Kevin

• audio clip WAV plays is not in Final Cut Pro (unless in the timeline)

  I have a few audio dialog recorded externally on syncing with my videos. It is in format wav 24-bit / 48 kHz. The problem is the audio clips will not play participate in event viewer so that I can revisit. To be more precise, when I hit the space bar the cursor moves along the clip, audio level indicators move up and down as if it is being read, but I have no audio output. However, if I drop the audio clip in the timeline panel, press space - it plays perfectly!

  Clues of what happens anyone?

  Thank you.

  10.2.3 FCPX

  Try to convert the audio 16 bit @48 kHz .aiff.

  The audio as it is, very probably turned in the Timeline to conform to the parameters of the project on the fly.

  Al

• I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  I have synced clips successful but video and audio are not visible until it is developed to the timeline. Returned results completely black film without sound. Any tips?

  Please give as much information as possible on your support. The video and audio works in QuickTime player? What are the specifications of media?

• LifeCam does not work, get a LifeCam error could not save your, photo, audio clip or video clip

  Just got a LifeCam Cinema.

  Installed the drivers-software, plugged the cam, noticed drivers installed.
  Tested by opening the installed LifeCam software. Describes the options to take photo, audio or video. "Or the other option does appear immediately the error" LifeCam could not save your, photo, audio clip or video clip.

  Shows Device Manager is installed correctly.
  Swapping the same USB ports it shows in the software, no device detected, a driver is re-installed during the exchange of the ports, it comes up with the 3 options mentioned before and again the same error message.

  Have also tried Google chat and shows no video, but gives the possibility to do video chats.

  System: Windows 7 64-bit.
  I have full admin rights on the system...

  Christophe ideas?

  Hello Striff,

  If the camera is not detected, it seems to me that the drivers are not installed for the device works, I suggest you reinstall the Lifecam drivers and check if you have the same problem.

  I suggest that you try different methods listed in the following article to resolve this problem:

  Troubleshoot failures to find the new LifeCam hardware:

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Audio clip does not appear with the video

  I have AVCHD clips in a project. When I bring an element in the timeline, the audio track is not there. Audio does not appear in the monitor Source, either. I am able to play the clips on the outside of the first and audio is fine. When I right click on a file to view its properties, it lists no audio. I brought the same clips in first on another computer and the audio seems in good condition. I compared the settings on both computers and everything is the same. Pretty amazing things

  Clear all the cache preferences including these media:

  C:\Users\username\AppData\Roaming\Adobe\Common\Media Cache

  C:\Users\username\AppData\Roaming\Adobe\Common\Media Cache files

  Rename folder that image is and try again.

  Make sure that the card is copied to the hard drive first.

• Audio clips mp4 not recognized after upgrade to CC 2015.1

  Just upgraded to CC 2015.1 on a Windows 7 Pro workstation. A former CC 2015 project file opened yesterday, received an error message about missing a missing MultibandCompressorCore.dll, saved as CC 2015_1, did a few editig, seems ok, and smooth. But today many clips are offline, when I repeat the tracks audio and audio clips are not recognized (screenshot). When I simply import the clips of same, there is also no audio what either is. When I check under change clip audio channels are grayed out. When I play the clips via Quicktime or Windows Media Player all sounds is there. I'm lost in the darkness, silence, please help.

  

  

  Exact same file on another workstation (with the same characteristics). One with and one without sound? Import the same video in After Effects and Audion works like a charm, the fable is there. What I'm missing here? A first adjustment?

  

  I had the same problem. What I've done. 1 / I chose all mp4 files in Windows Explorer. 2 / I created a new folder very close to the original (s) 3 / I moved the clips (without the cfa and so on...) for the new records. 4 / premiere Pro will be automatically "relocate" the missing clips when you reopen the project. And now, they have audio too. I hope this will help.

  Best regards

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• Audio clip is not dragged himself along with the images on the timeline. Adobe CC

  H,

  First CC

  Audio clip is not dragged to the timeline when I try to drag it from the source monitor Panel.
  Please help me solve this problem
  Thank you

  

• Audio clips do not play back on the new devices from Apple and Android

  Hola,

  Successfully exported and load a video on youtube.  Unfortunately discovered audio excerpts do not play back on latest Android and Apple devices, but being of other clips.

  It doesn't seem to be any rhyme or reason.  a lot of audio tracks, but I only have a problem with the two voices.  and select clips on the two tracks do not play back - it's not all one and nothing on the other hand, some play, some don't.

  video and audio play fine on most devices and computers, but on a privileged few, these audio clips are missing.

  PP CS6, exported in h.264 mpeg file.  audio is uncompressed 16-bit.

  Help.

  Florian

  I don't know if it's kosher to answer your own questions.  Understood that after about 4 hours of troubleshooting...

  reduced to all THE AUDIO CAPTURED on a PARTICULAR DAY.

  in figures, this bad paired audio audio the other day who played back fine: wav 48 kHz, 16 bit,.

  found a thread (http://www.videomaker.com/forum/topic/audio-channelscancelling-each-other-out) that mentioned stereo audio where one side is out of step with each other, when read by a mono speaker (some apple and android devices, but not all) it will cancel out (can still be heard, soundtrack and effects).  When reading through the headphones or stereo speakers, you can tell that she is out of step.  Something trying to convert the stereo signal to mono cancelled the progressive audio funny.

  My dose was hard pan the audio tracks, solo, export only one mono aac audio, re - import the sound signal of a new track, and I settled for the mono voices above.

  hope this helps-

  -Yes, thank you-

  -your welcome

• Audio clips of some clips plays do not, while others play very well. Photo included.

  If for some reason, while I was working on my project, suddenly the audio playing back fine stopped playing sound back.

  After trying to solve this problem (reset the caches, import audio, restart the computer) I'm here asking for help.

  After an hour of banging my head and google search, I noticed that the clips suddenly not work had a different color to them.

  On the left is the clips on the right and work no job clips.

  
  Could be the problem?

  Thank you.

  Data sheet:

  CS 6

  MacBook Pro

  10.8.4 OSX

  8 GB ram

  The audio files are .wav.

  

  Hello

  Thanks for posting on the forums. Please right click on audio clips that do not have sound and go to option channels Audio and in the channels of the Source tab select left and right respectively in the drop-down list. This issue may arise if you there is "none" option selected in the source of the string tab. Please update if this solves your problem or not.

  Thank you

  Vinay

• No audio clip names do not in the timeline

  In first CC, none of my audio tracks shows the name of the element.  The video tracks do just fine, but the audio tracks are just empty.  They play very well, but do not display the name of cip.  I tried to go through the settings but nothing seems to fix.  I tried to start a new project with different audio clips but still the same problem.
  Under first CC (with the last update) Mac Pro running Mountain Lion.

  In the timeline panel, select the timeline (wrench) display settings > display the names of Audio.

  Peter Garaway

  Adobe

  Premiere Pro

• Videos/audio clips embedded do not appear

  Help, please?

  I recently downloaded Internet Explorer 9, so I don't know if this has an impact on my problem as he has only begun to happen since this.

  I can play video and sound without any problem on youtube and even on BBC iPlayer. But embedded videos and audio clips on the Internet from BBC News and BBC Sport sites do not appear on the pages for me to try to play. It leaves just a white space, as if they do not exist.

  I just recently downloaded the Flash 10.2 r159.

  And I'm on a windows 7 Home Premium 64-bit if this is something you need to know.

  Have tried to use google to find what is the problem and no help but no luck.

  Any help appreciated, thanks.

  BBC.co.uk is on the Microsoft compatibility view list.  Right-click at the top of the screen, click on the command bar, click Tools, click compatibility view settings.

  Click on the box: Microsoft Web site lists are updated.

• Duration of the slide show CS5 does not again refresh audio clip

  In a slide show, complete with 'Fit audio slideshow DURATION' checked (duration 00; 19; 32-24), I decided to replace the audio with a composition more short (00; 10; 00; 22). With the original audio clip erased and the new added audio clip and the 'slide show audio TIME Fit' checked, slide durations recalculated so that the last slide has a 00 exit point; 10; 00; 22 but the duration of the slide show is 'stuck' 00; 19; 32; 24. the end action takes place to return to the menu, but when the last slide goes black (at 00; 10; 00; 22) keeps him slide show running with a black screen, probably all the way to 00. 19; 32 24 before it hits the end action, even if I did not let it run again at this point. I shot 'Fit slideshow to audio duration' then turn it on again, in the hope that it will recalibrate at 00; 10; 00; 22, but the length does not change. Help, please!

  Try to play with these ideas:

  Uncheck "Fit to Audio duration slideshow."  (As you probably now it have anyway).

  On the slide show tab basic properties, set the duration of the slide to zero.  Now, what is the length of the slide show?  The length of the audio new or old?

  Or, something great (so I think that the total is more audio length) on the duration of the slide.  What is the length of the slide show?

  Search now "Fit slideshow / audio.  How long is it?

  I had the same symptom as you did (audio plays beyond the end of the blades) when the durations of slide added unless the audio length and 'Fit audio slideshow' was unchecked.

• Last approximately 10% of audio clips do not play

  My imported songs will not play the last 10% of the clip.  At first I thought it was a result of trying to use clips from 6 to 10 minutes of music, like 1-3 minutes titles seem to never fail, but could not find this same cut out all but the last minute of a long clip (do a 10 minute clip in a two minute clip) and try to use has resulted in his last 10% plays do not!

  The waveform for each audio clip is displayed in the Source tab and is fine.  But rub or play the clip works only until the point 90% and then sound becomes silent.  This is true to the Source drive or when the audio is inserted into the timeline.

  I have converted the original .m4a to mp3 and wma audio files, but always with the same result.  All the clips of converts play in QuickTime and WM player players, so it's something within Pro CS4 Prime Minister himself who is a failure.

  I tried everything I can think without results and have run out of ideas.

  Any suggestions, anyone?

  I would like to convert these source files to PCM/WAV 48 kHz 16-bit format and import it into the project. PrPro should love these files and you should have no problems. You must specify PrPro moments to conform to these files until you make slide them on the Timeline (progress bar for consistent standard in the bottom right of the GUI). It should take only moments with these files (duration and your system will dictate just how long), and you might not even see the progress bar.

  Good luck

  Hunt

  BTW - how you convert? Soundbooth or Audition can do easily, as well as free Audacity.