Melted how audio and keep the audio level in clips later

I have piloted PE 10.  When I add keyframes manually to fade audio output, or simply select the option ' fade out ' to fade at the end of an audio clip, the audio ends at the end of the clip and the audio of the following clips is to initial level.  This creates a large discontinuity to the noise level.

What happens if I want to the next clip or clips to continue in the same faded audio level, rather than start at their original level.

In Pinnacle Studio, for example, when you fade down audio, all audio to the right will be adjusted to match the level after the fade, as long as there are no keyframes forward of this final key-frame fade.  Now that I'm getting 10 EP, I'm bored of this behavior.

In PE10, there is a sequence of keys which allow this behavior?

If you have only one or a few Clips, where you want to reduce the Volume, I do so at the level of the Clip and simply adjust the fixed effect (appears automatically on all the audio Clips), and add keyframes to adjust the Volume.

I find it easier since the effect controls panel, accessible by selecting the Clip you want to adjust, and then in the effects tab, choose Edit effects.

Lets say you have a Clip, where the majority of the Volume is just, but there is a section where you want to turn it down. Go to where you want the Volume to start to get lower, add a keyframe (toggle ON keyframes), then go to where you want the Volume restore the main value and add another keyframe. At this point, nothing has changed, but you added two key frames, which "held" the Volume at the current level. Now, go where you want the Volume to its lowest, to the right of the first keyframe that we added. Add another. Adjust the level to this keyframe (now the second in the Clip) to what you want. Go where you want the Volume first on the rise, just before the second keyframe that you added (now third), and add another keyframe. Adjust so that it matches the Volume you settled in what is now the second keyframe. You will have four key frames: the first, one that keeps the Volume at the beginning of the Clip, the second, which allows to adjust the Volume to its setting, the third, which corresponds to the Volume of the second, then the fourth, keeping the Volume at the level of the initial until the end of the Clip. It will look like this:

Some like to do the with the "rubberbands" Keyframing in the Clip itself, but I like the effect controls panel.

In addition, keyframes that we added, are linear and if you want to adjust the Interpolation, the smoother changes just Rt-click on each keyframe, to adjust the Interpolation. Interpolation is a little abstract, so I suggest to read the help files on Bezier curves on keyframes.

Good luck

Hunt

Tags: Premiere

Similar Questions

  • How can I keep the story to come back later after that I erase it?

    Even if I select remove history whenever I use Firefox, I noticed that my story shows up again after a few days. It shows even a week or more of previous history sometimes. There is another user for my computer. They ask that my story will be pulled up again and again, just to prove they know what sites I visit? What is going on? I just don't want my story made available to anyone other than me. I don't want any antecedent kept at all.

    more specific, see the options to access the options menu...

  • How to move the MSWMM files and keep the data on my computer?

    I downloaded digital film from my camera to a destination on my D drive as a file MSWMM (collections), and whenever I try to move the downloaded film (collection), it does not recognize the movie more.

    How to move the MSWMM files and keep the data on my computer?

    The mswmm file is the project file, not a video.
    Think of it as a recipe for a cake, it only tells you what to do with the ingredients, but does not include the ingredients.
    The mswmm file tells the computer to look in a certain folder to use a video or audio file.
    If you move the file, then MM knows not where is the file, then you must tell it, by right clicking on a red x on the timeline and then choose search for the file.

  • How you copy mp3 files from the my music for a cd drive folder and keep the files in mp3 format, format it with windows 8

    in the past with previous versions of windows, you can easily copy MP3s to a cd and keep the files in format mp3, format thus creating an mp3 disc, you made by selecting the songs you want to copy on disk, you must select the songs of the my folder music and make a click right then on the song selected or songs , you would then select send, and then select the drive that contains the blank cd in it to send the songs to, you choose then to a standard audio CD or data cd, you must select the option data cd and the drive will keep the songs in mp3 format, it was all done using windows Explorer. I would like to do the same thing to do these discs mp3 on my computer windows 8, however I can not understand how do, can help a whole me with that?

    Hello

    I would ask you to check out the link and follow the steps in the article.

    Burn a CD or DVD in Windows Media Player

    http://Windows.Microsoft.com/en-in/Windows-8/burn-CD-or-DVD-Media-Player

    Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

  • How to transfer pictures from iphone to PC and keep the date, time and place

    How to transfer pictures from iphone to PC and keep the date, time and place

    Hello Grumpelfuerer,

    Thank you for using communities of Apple Support.

    If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

    Import photos and videos from your iPhone, iPad or iPod touch

    Best regards

  • How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

    How to export pictures / albums of iPhotos to external disk and keep the time/date/year and location information changed?

    Menu, file == > export - check boxes to include metadata and location- export to iPhoto

    LN

  • How can I import a folder picture of mac to ipad and keep the subfolders as is?

    I want to import a file and KEEP the subfolders just how they are.  I don't want to re - fills to date, which is what makes the photos.  I tried to use itunes to import the folder and its subfolders.  There not just a way to drop the folder on the ipad via wifi?

    Response of old Toad

    Import the Photos and albums app records

  • How can I keep the dock and menu bar in the window

    How can I keep the dock and menu bar in the window

    First of all, go to System Preferences and select general:

    Under the dark menu and dock option, uncheck "hide and show the menu bar automatically".

    Go back and select Dock Prefs system:

    Make sure that "automatically hide / show the dock" is not checked.

  • I have Microsoft Money 2006 how can I update and keep the info?

    I have Microsoft Money 2006 how can I update and keep the info?

    Hi NRHand7,

    Microsoft has stopped selling money on June 30, 2009. The last activation of version (more Money, or money 2008) required in order to be fully functional.

    For more information, you can consult the following articles:

    What is Microsoft Money Plus sunset?

    Money Solution Center

    We can refer to the following articles and check if it helps.

    How to export and import account information in Microsoft Money

    How to remove and reinstall Microsoft Money

    You can also post your query in Microsoft Money Forum to get help.

    Microsoft Money

    Hope this information is useful.

  • 910219. how to download and keep the Windows Update files?

    Hello

    What is the ideal way to update Windows? now, Windows downloads the selected updates. where? I do not know! and after their installation, it removes the packages for installation on my computer. This causes the downloaded updates are lost, and I can't use them to similar machines that need to install the same updates. for these machines, I have to download updates again! This causes my internet to be charged again while it is not really necessary.

    the ideal way, in my view, is that I can specify a folder for the Windows Update service. It can use a default folder for that also. After selecting the updates, I want to install in my system, it checks to see if the update is already existing in the folder. only if NOT it downloads. then after downloading it maintains the package in the same folder after installing. installation should be done automatically as it is done now. Then I can move the folder to another machine. in the second machine, I also choose the update I want to be installed which are mostly the same as the first machine. for example, Windows Update only consumes my internet traffic for updates that are not yet downloaded. I wonder why Windows Update doesn't currently work the same way?

    by this method, I can at least use the consumption of traffic and I can access the latest updates with the easier and faster way. I I would like to choose a memory flash for this purpose and keep the folder inside.

    is there a way to achieve this?

    THX

    Security updates are available on image files CD ISO-9660 starting from Microsoft Download Center

    http://support.Microsoft.com/kb/913086>

    You can also download individual updates from the catalog and save to be installed later.

    http://v4.windowsupdate.Microsoft.com/catalog/en/default.asp>

    You can also download individual updates from the catalog and save to be installed later.

    http://catalog.update.Microsoft.com/v7/site/home.aspx>

    Click the Add button for each update you want to download. Once you have what you want, click on the link "go to download basket. Type or browse to the location where you want the saved updates to and then click on the button "Download Now".

    Once downloaded, you can then burn to CD or Flash...

    How to download drivers and updates from the Windows Update Catalog or the Microsoft Update Catalog

    http://support.Microsoft.com/kb/323166>

    Other links that may be useful:

    Search for a download

    http://www.Microsoft.com/downloads/search.aspx?displaylang=en>

    How to install multiple Windows updates or hotfixes with only one reboot

    http://support.Microsoft.com/?kbid=296861>

    For security and other fixes published for a given month:

    http://www.Microsoft.com/technet/security/bulletin/Ms#-* .mspx >

    Replace # with two-digit year

    Replace * with the three-character month abbreviation

    There are reported for that month, you will see the list of 'critical' patches 'important' for this month

    Check the 2nd Tuesday of each month - later in the day.

    For just the list:

    http://www.Microsoft.com/technet/security/current.aspx>

    Courtesy of MVP Harold Horne

    UTC/GMT is 12:58 on Wednesday, May 9, 2012

  • How to import photos from a different catalog and keep the setting in this catalogue?

    How can I import photos from a different catalog and keep the setting in this catalogue?

    In a catalog, select the photos you want, then use file-> export as catalog

    In the 2nd catalog, use the file-> import from another catalog

  • How can I use Photoshop to remove scanned Brown adhesive around the edges of a digitized photo and keep the image showing through the band? Thank you very much.

    How can I use Photoshop to remove scanned Brown adhesive around the edges of a digitized photo and keep the image showing through the band? Thank you very much.

    Dear Melissa,

    We thank you for your email about my problem with the Brown stick Ribbon at the bottom left of this photo. I attach the screenshot. As I said before, I need to remove the Brown adhesive while maintaining the image of the small low boat left and its mast covering the band. Is it possible to do this with Photoshop?

    Kind regards

    Robert Bellingford

  • I use Lr5 on a PC, working on the Nikon RAW files. Without even touching the images, they lose their shine after a few seconds. Why and how can I keep the liveliness to the origin?

    I use Lr5 on a PC, working on the Nikon RAW files. Without even touching the images, they lose their shine after a few seconds. Why and how can I keep the liveliness to the origin?

    Step 1: Adjust an image in Lightroom, until you are satisfied with its appearance

    Step 2: Use develop-> new preset, select all selections in the new preset dialog box (note: I always uncheck the exhibition here, who should probably be adjusted picture, I'm mostly interested by contrast, vibrance and camera calibration settings)

    Step 3: In the import dialog box, on the right, under appliquer apply when importing, select the preset desired beside development parameters

  • How move photos in a Collection of Smart and keep the structure folders?

    I am on a test of Lightroom and love it so far.  A seemingly simple task that I would try to move all my RAW files (which are all mixed with jpg and PSD to a new location and keep the current folder structure.)

    Currently I have strcutured files like this: < drive >------< year >------< month >------< Filename > .cr2 and I would like to move these < another disk >-< year >------< month >------< Filename > .cr2

    The export features look as if they will put them all in a big file?  Any ideas?

    Thanks in advance.

    There are several approaches to this problem. You can do this through Control Panel files in LR. You can do just about anything in the files Panel, you can do in Explorer or Finder. Just create folder and drag / move.

    Another way is to do it outside the use of LR Explorer (Windows) or the FInder (Mac). After you're done then go back into LR and tell LR where to find the moved files. Depending on how much you have, this could be a bit tedious.

    Another method is to choose the files you want, then export it in a catalog. When you do this, remember to include the option to export the negatives. Point the new catalogue to you another drive. It will recreate the folder structure when exporting. Delete the images of your current catalog. Do not drive delete just delete. Now import the catalog and choose the newly exported catalog. This time, choose the option Add files without moving them. If you are sure that everything is back and is very well, you can use the Explorer or Finder to go into your original file structure and delete files that have been moved to the new drive.  Be sure to choose only the moved files. If you are separating the RAWs this should be relatively easy.

    I hope that helps!

  • How can I get FF to open a web site in a new tab and keep the old tab so I can come and go?

    If I'm in a web site that contains other links, I want to be able to open the new link in a new tab and keep the original tab so I can switch back.

    When you click on a link that is on a right click of the Web page and click on "Open link in a new tab" this will open the new page in a new tab and keep your old tab open. If you want to open a new tab without clicking on a link on a web page, click on the button "+" near your tabs currently open.

Maybe you are looking for