Audio continues to play behind any composition

Similar Questions

• Text-to-speech audio continues to play for any other slide - but the current slide is suspended from the output

  Captivate 8.0.1.242 - Windows 7 64 bit - swf format.

  
  

  I have this weird error. I have the audio text to speech in my classes. I don't want the PlayBar of captivate. So I have buttons in the content to navigate forward. Each slide is hanging out and waiting for the user to click on the buttons navigate forward. My sound works for the first 2 slides text. Otherwise said, he plays as in the timeline and then stops. Waiting for the user to click on the button before you go to the next slide and the same routine. But after 2 blades, it will not stop. He continues to play the whole audio other slides in the whole cptx. But the current slide is suspended. So I hear everything supposed to be played for other slides, but all I see is a slide.

  
  

  When I click on the next slide, he begins to play the audio where it supposed to start for the current slide and plays again all other text in audio from the other slides. This is repeated again and again. Anyone have any idea why this is happening?
  

  Check the calendar for audio clips, increase the duration of the slide a little and make sure that there is a small space before and after the clip.

  Sorry wanted to add a screenshot, but this feature is currently disabled on this forum.

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• App gets paused / frozen just after start in gpu mode (audio continues to play)

  Hello
  You just bought a playbook!

  I have an existing Air application on android and iOS, I am now test it on playbook.

  With the rendering of the cpu, its normal, however when I put gpu in the descriptor of the app, the application stops all headphones rendering and the event just after starting the application, audio continues to play and the debugger remains connected.

  I am new on the playbook, I see there are power saving mode, maybe something is asleep?

  I tried:

  QNXApplication.qnxApplication.addEventListener(QNXSystemEvent.STANDBY, qnxStandby)
  
  internal function qnxStandby(e:QNXSystemEvent):void {
          trace("sent into standby ----------------------------------");
  }
  

  but nothing is ever attributed...

  The app works well on older iphones and android phones, I can't imagine I'm overloading the gpu.

  I use flash builder 4.6 and that's how I am structured:

  Pseudocode

  -addChild (loadingImage.png);

  -load game.swf

  -the addchild (game.swf) full,.

  -removeChild (loading image)

  When I load the main file game.swf, how it works, I get a few tracks, I can see it, but it's when he stops just of all activities and traces except audio.

  the swf so good, I can load this way using the cpu on the ok of the playbook, and I can load this way on android in cpu or gpu mode.

  Any help is really appreciated, thank you!

  -nick

  The problem was caused by the stage.quality example layout: stage.quality = StageQuality.LOW; This caused a freeze more often on the playbook. Being new the the playbook, when I read about the power API mode I thought what was related, but no, it was just a blocking of the application, where the debugger and audio arrives to stay connected and reading. hope this helps someone else.

• HTML5 video: video freezes regularly while only audio continues to play. Firefox 12, Linux, Centos 5 up to date.

  whenever I find a YouTube video on my linux (Centos 5.8, completely up to date) using Firefox12 machine, YouTube still offers for me html5 instead of Flash video. It would be nice, but intermittently the video stops (while the audio continues to play). I click on the (I don't know how it's called) cursor to the current position and the video will move again. until he paused next time, anywhere from a few seconds to a few minutes.
  I don't know why he delivers html5 instead of flash, I get on my laptop using centos 6 and firefox12 flash video. Is there a way to configure Firefox to get flash instead? If this isn't the case, I would be grateful for help when the video component setting stopping.

  You may be on the Youtube html5 trial. http://www.YouTube.com/HTML5

  mha007, these three macromedia inks are more for Windows and not Linux.

• When I stop a video on any site, the audio continues to play for a few seconds.

  I press the button pause on sites such as youtube and vimeo videos. The video stops but the audio keeps going. There is also a similar delay when kind that enter or exit full-screen.

  Not that I know of.

  You have lots of tabs open, or other tabs that have active content?

  It happens that one tab opened with a video player?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Freezing of YouTube videos, audio continues to play. As long as I continue to move my cursor, it plays ok. What's wrong?

  This seems to happen on all the Youtube video I play. I don't know other videos because I rarely find out all others. When the video freeze arrives that the download bar is always before the bar of games so I don't think that download is the problem. However, when frost occurs, the download bar stop moving. When game bar catches up to the download bar, the sound also stops. If I move my cursor, the video and audio are starting to play again. As long as I keep my cursor moving, the video plays well. I use Firefox 18.0.1. The computer is an HP dv6-1350us with two processors. Operating system is Windows 7. I also sometimes use Chrome and the gel can't on Chrome.

  Hello vearlbible, maybe there is a problem with the mode protected in the flash plugin - please go trough the following troubleshooting in the help document steps are provided by adobe: http://forums.adobe.com/thread/1018071

  or, as an alternative, you could try downgrading of 10.3 flash (which is always supported) and see if that fixes the problem.

• CP6: audio video continues to play when go to the next slide? !

  I work at the COP6. I inserted and avi video in my file using multislide mode, but the selection single slide for it to spread on. If I click to go to the next slide before the video is done, the soundtrack audio continues to play.  How can I stop this?

  Also, I'm crazy, or does not, we used to be able to add a mini bar reading/skin to a video inserted into older versions of cp? I can't find this option anywhere.

  Please help... customer requires this video and I am not satisfied with the way it is integration.

  Thank you

  Lori

  For the Control Panel, you need to insert a video event.

  Lilybiri

• VIDEO CONTINUES TO PLAY WHEN YOU DON'T SCHEDULE

  Is someone can you please tell me why this is happening.

  I did this until the simpler 4-layer session

  with two buttons and a video.

  When I click on the button that says goto point

  the timecode where the video is not (PICTURE 10), the audio continues to play.

  When I return to frame 1 where the film is in fact, I now get more versions playing.

  Here is the link showing the problem: http://mashfash.com

  and here is the file: http://mashfash.com/SimpleTest.Fla.zip

  This shouldn't ev en require actionscript.

  He was really driving me crazy.

  You must stop your video when you edit images.  You can use the removedfromstage event (and it will take actionscript).

• Videos like AOL, start to play, then the video blanks out and the audio continues. If I run Firefox in 'Safe' Mode, it works. Disabling plug-ins does not work

  TED talks, videos, AOL and others will start with a flash of the video, then off. The audio continues. I deleted the plugins flash and quicktime - no luck. I restarted Firefox in safe mode and it works fine. I then rebooted and disabled all the plugins - no luck. Internet Explorer works fine.
  Any ideas?

  One of the characteristics of Safe Mode is that it disables use of Firefox hardware acceleration of graphics. This method works around incompatibilities with some graphics driver software.

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  It takes effect after you quit and then restart Firefox.

• I interrupt my video and audio continues... If I'm still playing once it causes a headache. Help?

  This could be an easy answer, but I do my second video, so I'm not too well informed. Anyway, I imported my video with audio and it plays well back. So I play the video and put paused to try to synchronize the audio. The video stops, but the sound continues to play, and he will not stop until it has played. If I try to start from the beginning again to play the audio for the sort of ignore it, it overlaps just with original sound and noise resulting gives me a headache. I don't know if somehow, I can stop the audio part of the path, but if I can, that would be great. It would be much easier to sync. Thank you!

  You can add keyframes to layer with audio or it restarts the audio.

  Also, when you import audio in a layer, you must click somewhere in the layer (where you see the audio spectrum), glance at your properties panel, hit the sync menu drop-down and select workflow.

• * Media Player stops. My drive stops, then recovers itself after a few seconds. Screen goes black for 1-3 seconds, BUT Audio continues!

  I have Vista Ultimate, but I'm not very smart PC!   When I try to watch a video clip, etc., SEE above EDIT.  My drive stops, then recovers itself after a few seconds.  Screen goes black for 1-3 seconds, BUT Audio continues!  Then Visual back for a while until that the same thing never happens again anywhere!  Also the FAN spins-up like a jet plane taking off!   Help, please.  Thank you.

  Hi Peter,.

  1 have had any changes made on the computer before the show?

  2. which media player you use to play the video?

  3. the problem occurs on all the video clips?

  I would say as update you the video card drivers and check if the problem persists:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please respond with more information to help you best.

  Thank you.

• Published video is dead, audio continues

  I used images from my camera to create 6 minutes video in Movie Maker. After recording on my computer, e-mail, YouTube, he keeps the timing at different points in the video - but the sound continues to play very well. The picture freezes and will not move (it is not bringing in buffer).

  Any suggestions?

  I used images from my camera to create 6 minutes video in Movie Maker. After recording on my computer, e-mail, YouTube, he keeps the timing at different points in the video - but the sound continues to play very well. The picture freezes and will not move (it is not bringing in buffer).

  Any suggestions?

  =============================
  Just some thoughts...

  It is possible that one or more of your source
  files was not fully compatible with Movie Maker.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  It may also be worth trying to go to... Tools /.
  Options / compatibility... tab and uncheck all
  filters / OK... before the Save.

  If you have added a lot of effects and Transitions...
  remove them may be worth a try.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• videos embedded in lightbox - continues to play with sound

  I built a site using the Lightbox widget and try to incorporate a video (no YouTube or Vimeo instead of my own server). This is a flash video but embedded in a HTML page due to HTML5 fallback. No matter if I enter the page HTML or flash file, videos will play, but then when you pull the light therapy unit and return to the home page, the audio from the video continues to play in the background and there is no way to stop playing unless you close the page.

  I've been playing with the function outoplay in the HTML code, but it's always the same behvior, no matter what I do.

  I tried to keep the simple code that

  "< iframe width ="800"height ="600"src ="http://www.lightroom.cc/Urbangasse/Top35/build/virtualtour.html?autopl ay = 0; wmode ="transparent"; modestbranding = 1; rel = 0; showInfo = 0; controls = 0; frameborder = 0; allowfullscreen = false & amp; wmode = "Opaque" >

  < / iframe >

  or more complex than

  < html >

  < body >

  < object style = "height: 600px;" Width: 800px "> < param name ="allowFullScreen"value ="false"> < param name = value"autoplay"="false"> < param name ="allowScriptAccess"="always"value" > < embed src = "http://www.lightroom.cc/Urbangasse/Top35/build/virtualtour.html" allowfullscreen = "false" allowScriptAccess = "always" width = "600" height = "800" > < / object >

  < / body >

  < / html >

  See live here:

  http://vrer.BusinessCatalyst.com/Virtuelle-Besichtigung.html

  ADOBE MUSE TEAM and all members of the Forum help!

  Thank you

  Reinhard

  Vienna, Austria

  Yes, it is a bug on our end. This is the result of a fix for another bug, we had.

  The original bug was when a user had a game video in a lightbox and click to the next slide or closed the light therapy device, the video continues to play in the background. We tried several approaches to solve this problem, but given that we cannot achieve in embedded iFrames (a rule of Internet Security) and that you do not have a video widget dedicated, it is not a good way for us to stop the videos that works universally (no specific Youtube/vimeo/etc.). The method with which we came was to detach and reattach the video element using jQuery, which resets the video to its original state. Unfortunately, this also triggers autoplay behavior currently. Is clearly not ideal behaviour, and we are brainstorming ways to solve this problem. We will keep you posted on any developments in the situation; at the same time, having the video not autoplay value is the best solution.

  Sorry for the inconvenience,

  Sam

• Continue to play after FLV download

  Hello world!!!

  I have an air project that every seconds reads a txt file. Depending on the contents of this file, it loads an external swf file (the contents of the file is changed to an external program periodically)

  Each external swf file gots a flvplayback2.5 within which charges and play a video flv (everthing done locally).

  The problem comes when the contents of the txt file changes and I have to unload the previous swf and load a new.

  Despite the new swf loades cheek while I can still hear the audio of the previous swf file plays in the background.

  For the project, I haven't used that one charger in which I load external swf files. Before loading another swf in there, I call the Loader.unload () but no luck.

  I thought that this method would also eliminate the loaded object, but the reference Adobe on the said unload() method:

  "Removes a child of the Loader object that was loaded by using the load() method.    The property of the associated LoaderInfo object is reset to null.     The child is not necessarily destroyed because other objects can have references to it; However, it is therefore more a child of the Loader object.

  As a best practice, before you unload a child SWF file, you must close explicitly any watercourse in the child SWF objects, such as LocalConnection, NetConnection and NetStream, Sound objects. Otherwise, audio in the child file SWF can continue to play, even if the child SWF file was unloaded. To close the stream in the child SWF file, add an event listener to the child who listens to the

  Unload event. When the parent callsLoader.unload (), the unload event is dispatched to the child. »

  It's ok, but another problem rises!

  I don't know how interal structure of the external swf file is, beacause the customer gave me only the compiled swf (I guess that there not a lot inside the swf, I think that only the control FLVPlayback instance, but if I don't know the name of the flvplayback I can't call any method stop on this subject).

  So you know any method to unload the swf file loaded, brutally destroying, regardless of where he's hiding himself in the dark and mysterious jungle of Flash Player?

  Thanks in advance!

  Load external video file