Audio controls and background playback bar

Similar Questions

• No audio device and no playback device

  Hello, I am very frustrated. My computer crashed and I had to reinstall the operating system Windows XP with a CD. I was finally able to get to my desktop, but I lost all of my date. This doesn't bother me. My screen always seem to be on the Safe Mode (large letters, bad resolution, etc.), I was able to fix this by downloading some updates to the graphics drivers. Now: The big problem is that I have no sound. He said: No Audio device. Everything is gray out. I have installed all updates this website told me. Pack 3 Windows, updates of security 77, Fixit sofware to solve problems, check my audio card, etc. etc. It becomes infinite and I had installed updates and crazy things. All I want is my audio to work so my speakers have her again. I don't know what else to do after having tried all of these steps windows troubleshooting. All are the same, but not solve my problem. I already went to... Device Manager sound controllers, multimedia audio controllers, I restart those, disable and re-enable back. Every step of this troubleshooting and Microsoft and all the websites with forums like this. I have already installed as thigs gs... SOMEONE CAN REALLY HELP ME?

  Hello

  ·         What is the brand and model of the computer?

  ·         Have you tried to install the sound card drivers on the manufacturer's Web site?

  If Windows update is not able to find the drivers for the device so that Windows to recognize your sound card or processor, you must find and install a compatible driver on the manufacturer's Web site.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  If the problem persists try contacting your computer manufacturer's support site. A it could be a problem with the hardware.

• the audio control panel does not appear on various websites which I am sure they are there. I see them in IE and chrome, but not in FF

  The audio control panel does not show simply. On this site, I should see the control panel. http://www.testplek.annemariebeeke.nl/huiswerkopdracht_week3_bonus.html.
  It does not show in the other browsers, other people can see it, but I can't.
  Even with these sites:
  http://www.jokevan.nl/HTML5/oef3-3.html
  http://kokenvoorpapegaaien.nl/Kellerhuis/oef3-3.html

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How to hide a control and change a background image at the same TIME

  Hello

  I made a slideshow on LabView VI, who also monitors data in real time to a data logger.

  The program works like this: -.

  Start/Page 1:-bottom pane displays a nice screenshot. A set of indicators displays the data in real time. Switches to Page 2 after 20 seconds.

  Page 2:-background to an another screenshot. Hide indicators in real time and a set of three graphs appear, displaying historical data. Switches after 20 years.

  Page 3 etc:-hide charts and indicators, a 'slide show' appears by changing the history pane. Back to page 1 after the sequence.

  Everything works fine, except for one thing: I can't hide indicators and background to change at once, resulting in a clumsy "discrepancy" between the two.

  I did one VI example to illustrate this. Simply select two separate images to the façade, run the VI and toggle the Boolean control to see what I mean.

  Any idea how to get indicators and background of change at the same time?

  Thanks in advance,

  Hello

  Hi Jin,

  have you tried to "DeferPanelUpdates" when you power on? This is a property of the component...

  So David value = TRUE, do all the switching, to redefine Defer to FALSE!

• I get a popup that says no audio device imput found. Make sure that your audio hardware is workingand check your audio configuration in the audio device and sound themes control anel

  I get a popup that says that no sound device imput is to make sure that your audio hardware works and check your audio configuration in the audio device and sound control panel themes

  Hello

  1. what operating system is installed on the computer?

  2. when exactly you receive this pop up?

  3. able to play sounds using Windows Media Player?

  Please provide more information on the issue so that we can better help you.

  In the meantime, try the troubleshooting provided in the link below steps to solve the problem.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• No sound driver and no multimedia audio control?

  I clean my computer by doing a disk defragmentation, disk cleanup and uninstall programs that I don't use. Then I restarted my computer and then I had no sound at all. I tried restoring the system to get what I deleted the return, but it did not work.

  He asks me if I want to install a new hardware (multimedia audio controller, but I do not have a cd). I did the whole looking for your device under "video controller and games sounds" but all what I have there is: ".

  -Audio Codec.

  -Legacy Audio drivers

  -Hardware video Captuers

  -Media control devices

  -Video Codec

  I also tried "roll back driver" on the yellow question mark (multimedia audio controller) and it is said that "no driver files have been backed up for your device. Ive tried to update the device by choosing a type of material. but AC 97 controller 'may not be compatible"and mess up my computer.

  Im not really a computer person, so I don't know it that im doing. I don't know the brand of my sound card. I do not know how to find it or what, I just want my sound back, help!

  Hello

  It is likely that the sound driver was eliminated during the uninstallation of some programs. In this case, try to go to your computer manufacturer's website to download and install the audio driver. They should have ALL the drivers for your computer model. :-)

• Req to send my audio drivers and Control Panel

  Hello, my audio drivers and control panel have been lost due to the attack of Trojan horses. I am unable to choose my required drivers and Control Panel, as an error report occurs and is closing is the open window.so you, please please send me the suitable audio drivers and control computer panel.my laptop presario c555nr model.please send them as soon as posible.

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=c555n&submit=go+%BB

  These are yours?

  Alternatively, you can try to restore your computer to a point before the attack of Trojan with the Microsoft System Restore.

  Go start > all programs > Accessories > system tool > system restore.

  If the Trojan damaged your system to the point where you can't fix it, you may need to reload your OS using your HP Recovery Manager. Save all of your personal information. prior to this, as it will be deleted.

• I installed a USB device to a radio control. I have a total control, but cannot activate the audio in and out via USB

  I installed a USB device to a radio control. I have a total control but fail to activate the audio in and out via the USB port. The device does not appear on audio routing options (left click on the logo of the speaker), any ideas please?

  Tim, first read the whole message!

  (This after below is complete) Remove all usb drivers and charging system leave, after reboot, make sure that the item in question is connected before the reboot.

  Follow the steps 1, 2 and 3 below.

  1: make sure you use Win7 SP1 and all updates are current and responsible.

  2: after insurance above, go to Device Manager and remove all THE USB drivers. Don't worry, it will reload.

  3: reboot then System Device Manager will research and required load all the drivers.

  He must find all the items. If it does not investigate that in question is Win7 really compatible, 100%.

  If 100% Compat. with Windows7 should find!

  (Also make sure that the automatic Windows upgrade and install is enabled for software and hardware drivers)

• My audio and video playback stutters in cc pro 2015.

  my audio and video playback stutters in cc pro 2015.  It complies with the source, or the window of the program.  Continues even if my project is rendered.

  Win 10 64.

  2 x xeon x 5675,

  Quadro 6000,

  48 GB RAM,

  2 128 gb SSDS as a RAID 0 256.

  Is it because I only have the disk for the storage and the OS/software?

  [title published by mod]

  Try to change the entry to zero.

  If you want to continue to use the release of the nVidia card, try to remove the sound card completely.

• Windows 7 suddenly agitated developed audio and video playback after a week of everything fine

  I don't know if this means that my HARD drive is going bad on this new generation, or if something got screwed in place in Windows 7?

  Until yesterday, everything was pretty much OK for a week.  Last night, however, I started to develop audio and video ground.  Today, when I went to start, the computer hung on Beeeeeeep I turn it off and restart again.  I have still the video choppy.  I tried some diagnostic program of my Western Digital Green 1 TB 1 week drive HARD drive, and a quick test that was supposed to take 2 minutes estimated was still underway after nine minutes when I cancelled it.  It found no errors up to this point, however.

  Processor: Core i5 750
  My motherboard is an Asrock P55m Pro
  HARD drive: Western Digital Caviar Green 1 TB
  4 GB Ram 1333 Gskill
  Gigabyte 4550 video card

  I tried to roll back the audio driver and reinstalling one that worked, but no help.
  Tried to install the latest video driver, but no help there either.
  Tried to adjust the power of savings in the bios settings, but no luck

  I see many others have trouble with Windows 7 doing audio choppy, but they seem to be running realtek audio. Mine is VIA.

  Any advice/help/suggestions?

  Thank you.

  Okay, I went back and did another system restore to an earlier date, and everything was going well for a few boots.  Then she went and made a few updates, and the problem came back.

  The problem seems to grow after an attempt to install the following updates through Windows Update (and fails after every restart):

  1 - other hardware - Microsoft HID Non-User Input data filter (KB 911895)
  2. definition update for Windows Defender - KB915597 (definition 1.69.301.0)

  Other things, that he did...

  3. I have a Microsoft Lifecam VX-5000, and installed the software for it because I changed the USB port
  4. I had several errors with my Microsoft Wireless Multimedia Keyboard 1.1 and mouse.  I had to disable these updates last week, because they never properly install and keep trying to reinstall on each reboot:

  5. Microsoft - Input - Microsoft USB double receiver wireless keyboard IntelliType Pro)
  6. Microsoft - Input - Microsoft wireless receiver double USB mouse (IntelliPoint)

  Cripes, I bought Microsoft Products assuming that they would work well with Windows, and BOY was I wrong!  I got that grief of this keyboard, here and on XP prior agreement.

• the volume control on background music

  I finished my first iMovie composed of video clips.  I have two questions:

  How to lower the volume of the background music for a few seconds only

  How to disappear the music of a song before the end of the song.

  Thank you

  Hi, grosen25,

  There are two ways to adjust the volume in the latest version of iMovie (10.1.2).

  One way is to select the audio clip, and then click on the speaker icon in the toolbar at the top of your screen.   This will reveal a scroll bar

  allows you to adjust the volume from 0 to 400%.

  Another way is to first click on the settings button in the right middle of your screen and select 'Show waveforms' in the dialog box that results.  Then select the audio clip.  You will see a horizontal volume control line that runs through the clip.  Place your cursor on the line and move it up or down to increase or decrease the volume.

• Audio controls from the control center was lost in iOS10?

  Updated reluctantly iOS 10 and so far, the biggest annoyance is that my playback controls for some audio I play (audiobook of iBooks, podcasts with downcast, stream radio KPCC app) disappeared from the center of control... any way to recover?

  Quick scan power button or mute with the least amount of taps & shots is important when you want to respond to someone knocking on a door, or on the land line call, etc., and have hit to swipe several apps to reach the audio application when you were in another is an unnecessary extra step.

  Is there a way to get this back that I missed?

  In iOS 10, audio controls have been moved to a second page in the control center and are accessible by sliding left within the control center.

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• branching projects the playback bar options

  Make us some connections classes and wonder about how other users discussed navigation with branching. Captivate does not (as far as I can tell) users to customize it that slide the 'next' buttons 'back' on the playback bar will sail and the progress bar shows where the Viewer is going, not on each slide. With the projects ramifications, the lack of flexibility both of these features causes a huge problem: how to give viewers control over what they see and keep the order of the content of the way we've designed?

  Right now the only solution we have developed with is to hide the progress bar and the next/back buttons on the bar games and include 'back' and 'continue' buttons on some slides. This isn't an ideal solution, because the CC should be visible, and have buttons on the bottom of the screen makes it hidden by the CC, then put them pretty far up the, whose ruins just the Visual on a large number of slides.

  Am I missing a feature in captivate? If someone has found a way to work around this problem, I'd love to hear it!

  You put the CSS in the file assets/css/CPLibraryAll.css.

  The css is not there, add, is that the CSS is the example I posted. You do not need to have color in the css, I added it for a specific project.

  To activate the CC on and outside, you need create a tip action associated with a button to toggle the use of the CC. the "Toggle" action and choose "cpCmndCC" as the variable.

• When you disable the playback bar, it leaves a gray band of lost space

  I make a mobile app, so I need every millimeter of screen space possible square.  I made my own bar of reading, then I go to the skin editor and uncheck the option 'display the playback control '.  However, this leaves a gray band where the playback bar used to be; is it possible to get rid of this?

  Hello

  You must disable the borders as well as in the skin Editor, or at least to reduce the height of the bottom border,

  Lilybiri