My audio and video playback stutters in cc pro 2015.

my audio and video playback stutters in cc pro 2015.  It complies with the source, or the window of the program.  Continues even if my project is rendered.

Win 10 64.

2 x xeon x 5675,

Quadro 6000,

48 GB RAM,

2 128 gb SSDS as a RAID 0 256.

Is it because I only have the disk for the storage and the OS/software?

[title published by mod]

Try to change the entry to zero.

If you want to continue to use the release of the nVidia card, try to remove the sound card completely.

Tags: Premiere

Similar Questions

  • DVD ROM audio and video playback jerky/stuttery

    Hi all

    My first post and I'm rather puzzled.

    This problem just - I went to play a DVD (real DVD, not burned) in my laptop and playback was stuttery, audio and video.  Never noticed before, but is now constant.

    I have run all software troubleshooting and even checked this forum for solutions.  The most common seems to be to check if DMA is enabled, and it is.  I tried several video players (VLC, media library, WMP11) and the problem exists on each of them.  I checked to make sure that all drivers are up to date, and they are.

    I have an Inspiron E1705, 2,00 ghz core2duo, 1 GB of RAM.  The DVD player is a DVD + RW SDVD8820 Phillips.

    Ideas?

    Any suggestions would be helpful and appreciated.  Thanks for reading!


  • Windows 7 suddenly agitated developed audio and video playback after a week of everything fine

    I don't know if this means that my HARD drive is going bad on this new generation, or if something got screwed in place in Windows 7?

    Until yesterday, everything was pretty much OK for a week.  Last night, however, I started to develop audio and video ground.  Today, when I went to start, the computer hung on Beeeeeeep I turn it off and restart again.  I have still the video choppy.  I tried some diagnostic program of my Western Digital Green 1 TB 1 week drive HARD drive, and a quick test that was supposed to take 2 minutes estimated was still underway after nine minutes when I cancelled it.  It found no errors up to this point, however.

    Processor: Core i5 750
    My motherboard is an Asrock P55m Pro
    HARD drive: Western Digital Caviar Green 1 TB
    4 GB Ram 1333 Gskill
    Gigabyte 4550 video card

    I tried to roll back the audio driver and reinstalling one that worked, but no help.
    Tried to install the latest video driver, but no help there either.
    Tried to adjust the power of savings in the bios settings, but no luck

    I see many others have trouble with Windows 7 doing audio choppy, but they seem to be running realtek audio. Mine is VIA.

    Any advice/help/suggestions?

    Thank you.

    Okay, I went back and did another system restore to an earlier date, and everything was going well for a few boots.  Then she went and made a few updates, and the problem came back.

    The problem seems to grow after an attempt to install the following updates through Windows Update (and fails after every restart):

    1 - other hardware - Microsoft HID Non-User Input data filter (KB 911895)
    2. definition update for Windows Defender - KB915597 (definition 1.69.301.0)

    Other things, that he did...

    3. I have a Microsoft Lifecam VX-5000, and installed the software for it because I changed the USB port
    4. I had several errors with my Microsoft Wireless Multimedia Keyboard 1.1 and mouse.  I had to disable these updates last week, because they never properly install and keep trying to reinstall on each reboot:

    5. Microsoft - Input - Microsoft USB double receiver wireless keyboard IntelliType Pro)
    6. Microsoft - Input - Microsoft wireless receiver double USB mouse (IntelliPoint)

    Cripes, I bought Microsoft Products assuming that they would work well with Windows, and BOY was I wrong!  I got that grief of this keyboard, here and on XP prior agreement.

  • Audio and video Shifted only in Premiere Pro

    Hello guys,.

    I'm having a problem with premiere pro with sync audio and video, which are stored in files separated by means of bandicam.

    These files are saved as:


    VIDEO:

    AVI Motion JPEG to the 720 p 30 fps

    AUDIO:

    Stereo PCM 48 kHz

    When I open the video file, via a media player like the one used by default on windows, I have no problem, but when I add these files in the timeline of a sequence in first pro, I notice that after some time (+-2 minutes), audio and video are starting to change and I don't really know why.

    In Premiere Pro, I tried the sequence with the video and tried settings with HDV 720p30. In both cases I had the same output two files moved after awhile.

    Someone knows how can I fix this?

    Kind regards

    FC.

    Is bandicam media variable or fixed rate? If you don't know, drag & drop a file on the MediaInfo program mentioned here, go to TreeView and see if it's the VFR or CFR. PrPro do not play perfectly with the media of VFR. Which many screenshot recorders produce.

    Neil

    Media Info: https://mediaarea.net/en/MediaInfo

  • How to make audio and video playback at the same time in movie maker?

    I've done some films with a flip camera and edited with Movie Maker.  However, when I played movies the sound does not match the video.  The sound was going faster.  How to synchronize the two together?

    Try to download windows media encoder 9 series, microsoft, download utilities

    also... Once installed, open it, select "convert video", change how data

    is to convert, convert a folder that you have created.

  • Qosmio F60: audio and video distortion during playback of a media file

    Qosmio f60 / win 7 64 bit / 8 GB ram / 1 GB video card...
    Purchase date: June 2011

    question: audio and video distortion during playback of a media file

    of fact steps:

    (1) updated drivers audio & video > update bios > sent to Toshiba UAE; reformatted > replaced speakers; same CPU > (more funny when im not connected online using wifi, everything is good and ok) > dealers replaced wireless nic > No. SUCCESS still questions...

    (2) being researched a few discussions > reinstalled the drivers SATA > IRST update of intel > no still no chance > uninstalled TSRI > used Mirosoft AHCI > HDD and PC health monitor update > disabled all the > always unlucky (this solution came from TOSHIBA himself of their technical knowledge base)

    Resellers cannot identify the problem... I followed the technical knowledge base and still not solved...

    CAN SOMEONE PLEASE HELP ME SOLVE THIS ANNOYING PROBLEM? IT BECOMES NOWHERE >

    Toshiba tech support, please help me to solve this issue... I just bought recently and I didn't like that at all. It is not worth...

    > more funny when im not connected online via wifi, everything is good and ok
    Does this mean that this problem appears only using the WiFi network?
    Hmm how about Wlan driver update? Try this.

  • LifeCam HD-6000 wrong with the audio and video lag during playback, also a problem with the autofocus.

    I have a Lifecam HD-6000 laptop. Since the first day, I had trouble with the audio and video lag during playback. It cuts sometimes several seconds each time. Any program I opened to view it. Windows Media Center, Real Player, Media Player Classic, etc.

    There is also a problem with the autofocus. It will randomly in and out of focus, more spoil videos that I do. Any help with all these problems? I've updated all audio cards, drivers, etc. I am running Windows Vista.

    Thank you.

    Hi thebuell4,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

    Method 2: Install the latest software/drivers for the lifecam.

    http://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-6000-for-notebooks

    Method 3: Follow the steps in the article.

    Image of LifeCam guard auto setting very frequently

    For reference:

    The problems of compatibility between LifeCam and other programs

  • Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

    Have 13 on PC elements. Although I can hear audio on video playback in HD Writer AE 3.0 when I start a new project and add video to the first edit there is no audio. Tried to help but could not find an answer to my problem. Can anyone help?

    I'm glad you found the solution in one of my suggestions, Jon. Please mark this question as answered. Thank you!

  • Windows Media Player-audio and video freezes during playback

    FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER

    FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER WHILE THAT WATCHING VIDEOS.  WHEN THE IMAGE AND THE SOUND HANGS, THERE IS A DULL NOISE.  THIS FREEZING HAPPENS ON EVERY MINUTE OR SO.  THAT HE IS PAST JUST STARTED ABOUT 3 DAYS AGO.  BEFORE THAT ALL WAS WELL WITH THE PC AND WATCH VIDEOS.  I RUN A FULL WITH MICROSOFT ESSENTIALS SCAN AND SAYS THAT SOME THREATS NOT FOUND.  I REBOOTED, DEFRAGGED, REMOVED THE POWER CORDS, ETC. WITHOUT SOLUTION.

    PLEASE ME TELL HOW I CAN STOP THIS PROBLEM?

    FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER WHILE THAT WATCHING VIDEOS.  WHEN THE IMAGE AND THE SOUND HANGS, THERE IS A DULL NOISE.  THIS FREEZING HAPPENS ON EVERY MINUTE OR SO.  THAT HE IS PAST JUST STARTED ABOUT 3 DAYS AGO.  BEFORE THAT ALL WAS WELL WITH THE PC AND WATCH VIDEOS.  I RUN A FULL WITH MICROSOFT ESSENTIALS SCAN AND SAYS THAT SOME THREATS NOT FOUND.  I REBOOTED, DEFRAGGED, REMOVED THE POWER CORDS, ETC. WITHOUT SOLUTION.

    PLEASE ME TELL HOW I CAN STOP THIS PROBLEM?

    =======================================================
    It might be worth a try to do a system restore in time before the beginning of the question.

    (306084) how to restore Windows XP to a previous state
    http://support.Microsoft.com/default.aspx?kbid=306084

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • No audio and video stutters on live TV

    Original title: Windows XP Media Center:

    Windows XP Media Center: I get Audio and video recorded with no TV Audio of live TV and video blocks in short intervals with visible images, but images break sometimes.

    Update your tv tuner card, graphics and audio drivers.

    Visit the websites of these different manufacturers to download and install the latest compatible drivers.

    S.Sengupta Media Center MVP

  • Flash crashing and video playback/Streaming problems

    Recently did a reinstall of Windows 7 and have experienced problems with Flash and video playback in general. Questions may or may not be related. I have not detected problems with the opera and so I think that these are problems of Firefox. 3 major video sites that I use are (HTML 5 player) YouTube, twitch.tvand Crunchyroll.

    (1) flash very quickly and systematically accidents

       * Specifically noted when viewing streams on twitch.tv
       * Often crashes within a minute, almost certainly within a few minutes
       * Crash logs provided below
    

    (2) reading crashes

       * Occurs on all 3 sites
       * On twitch, stream freezes (but Flash does not crash). On YouTube, loading circle comes up and video freezes
       * If this occurs on twitch, Flash less likely to officially crash
    

    (3) volume cuts

       * Occurs on all 3 sites
       * If this occurs on twitch, Flash may still crash after
       * I've had volume issues with my system in general, with volume occasionally cutting in gaming programs, such as League of   Legends and Hearthstone. That being said, I do not experience this issue with Opera and this only occurs on video playback in Firefox.
    

    Flash Crash IDs:
    BP-8e2f650d-7fc2-4235-a864-ef4282151205
    BP-a6760c7c-c561-4be5-BD48-bea1f2151205
    BP-82dee164-B506-4282-BCA7-6f18a2151205
    BP-ef411a19-00B9-4406-B91F-bd0572151205
    BP-2cee7e29-008C-4e6f-9FAA-eea992151117

    Attempts at Solutions:

       * Disabled hardware acceleration in Flash
       * Reinstalled/Updated Flash and (I think) made sure there is only one version of Flash
       * Reinstalled/Updated Firefox
       * Cleared cookies/cache/other stored web data
       * Updated all drivers
    

    I wouldn't stop using Firefox as my preferred browser and works fine on all my other devices, but if the problem persists, I'll have to. Any help or insight is appreciated!

    Unfortunately, I have tried all fixes of cor - el without success.

    However, I started to use audio drivers Realtek instead of Microsoft and everything seems to work more smooth. Will update later when I did several tests.

  • Very bad audio and video performance

    I have a Pavilion dm1 laptop running Windows 7.  When I got all first the machine audio and video performance was very good.  However, towards the end of last year the performance for audio and video has become extremely slow.  Still, the sound stutters even without video.

    I used the tools to clean the registry, updated (or verified) all drivers I can think, but nothing has not improved.

    Maybe related, but less to worry about because it is necessary that in rare occasions, boot has become very slow too.

    I think I have tracked down a part of the problem by chance.

    Normally, I start my DM1 when connected to various devices of office as keyboards etc.  These are all plugged into the USB ports.  As the boot begins there very long delays in the process.  And when the boot ends stuttering audio and video as described.  However, if no USB device is attached during the boot process, start happening quickly and the audio/video all work fine.

  • Mix audio and video down? (no export)

    I was wondering if a user can MIX down audio and video without video exportng and reload again in the project...

    Also if anyone can tell me if the leaders of the scale are of any use outside their use as marker, for example may control playback within a certain range? Forgive my loose terminology.

    hunt adobe.jpg

    Certainly!

    When you say mixing, you hear to raise the level of the volume in some places and lowering in others? This was done using audio keyframes.

    Keyframes for audio can be done directly on the timeline. Just select a clip and position the playhead CTI top, and then click a keyframe in the header of the track, to the left of the audio track. This will create a keyframe to the position of ICT. This issue will increase the volume and lowering it would decline. You can create and position as keyframes that you need to mix your audio tracks.

    Regarding your problem of reading, you can isolate which sector you edit, make or exit by placing the work area bar (the light gray color bar that runs along the ticker on the timeline) so that it covers only a part of your project.

    (I see you've ordered my books, Carlton! Good for you! These and many other topics is covered quite well in them.)

  • I accidentally blocked play audio and video on the BBC website. How can I unlock it?

    Today, a new video palyed often opens the door to a range of other unwanted videos.
    When my cursor hovered over this video window, engine block sign will appear in the upper right. I clicked on it, thinking that he would block the Stream of videos. Instead, who had arrested ALL the audio AND video games I can get on the BBC website.
    How can I unlock it?

    Hi, please see under the permissions tab and check the setting of the Flash - Page Info window - see technical details on the page you.

    If you are using an adblocker as Adblock Plus, also look at options/filter preferences.

    Either way, you have several version of Shockwave Flash - the oldest should be deleted - How to uninstall the Flash if necessary.

    If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

  • iMac 7.1 displayport switch audio and video?

    Hi all

    My family would like to connect his iMac 7.1 2.4 Ghz Core2Duo until his TV downstairs, and I was wondering if the displayport located on these iMacs can transmit video and audio through, if we were to get a displayport HDMI adapter. Thank you

    The computer is about 10 years old, this vintage iMacs didn't have the ability to cross the Mini DVI audio & video port. The computer would need to discreet cables for audio and video.

Maybe you are looking for