audio import

Similar Questions

• iDVD questions-iTunes audio import missing link. try to download the playlist. allow me just to download a song

  iDVD-itunes link missing in the area of audio import. you try to download playlist for slideshow.  any suggestions?

  What system do you use?  Where are you located library?

  I have the same problem with 10.11.5.  He has not tried it with the previous 10.11.4 system.

  The only solution I found is to drag your iTunes folder in this Media/Audio iDVD pane. You can access the tracks there by the artist.

  
  It's the best we can do as iDVD is on his death bed.

  

• No me permite los los archivos mp4 audio import has the linea of tiempo first cc 2015

  No me permite los los archivos mp4 audio import has the linea of tiempo first cc 2015

  Hi Robertol,

  It does not import the audio from mp4 files to the chronology of the first cc 2015

  You are able to import other files?

  Please check if your audio and video tracks are correctly patched source.

  FAQ: Why no audio or video will not at the track where I let down?

  Thank you

  Ilyes Singh

• Audio imported cuts in the publication

  This is a new (for me anyway!)

  Normally I record and edit all my audio to the presenter, but I'm working on a course where I use audio imported on the slides. Import went well. I did my editing in presenter, who went well, as expected. I added our company standard.5 second of silence at the beginning and end of each slide. All great.

  But when I publish it, the last second or two audio at the end of the slide is getting cut off, in the reading.

  Normally, I would have all the bullets during the click on the narrative and the audio should be synchronized to the top, but in this case, because the speaker is talking about bullets rather than read them Word for Word, I chose to not to have all the animations on the balls, so everything happens at the same time and then the sound plays. That's when I noticed the problem.

  I tried to place the chip on each slide 1 as 'after' then bullets 'with', but not joy. I also tried setting all the balls in 'on click' and have them enter this second half of silence before the start of the audio, but which is not solved the problem no more.

  Any ideas?

  Some photos in the dark:

  Try adding 2 seconds of silence at the end of the slide and see crime if cela help/hurt/does nothing.

  Try to change this audio file in another program (Audacity is free) and add as the second desire.5 of silence there re - import the audio. See if that makes a difference.

• Audio imported not PP chronology. MP4

  I'm getting horrible I'll have enough of these problems with CC2015. Here is the problem today.

  Audio does not matter in my calendar. I use two types of video clips... MP4 and .mxf. I used these clips of the YEARS without any problems.

  I'm on CC2015, all updates.

  Windows 7

  I7

  Quadro 4000

  24 GB ram

  Here's what's happening. I import a clip in the project Panel. Then I drag him in the timeline and audio does not matter. I double click on the item in the project Panel and he plays WITH the audio in the source monitor.

  The only way I can get the audio in the timeline panel is to take the clip in the project Panel and make its own sequence. Make my cut and then cut and past the clip in the main timeline. Can I get audio and video.

  What the hell is happening? How can I work for years without this problem and suddenly is that the only way things work?

  PS. If I drag the clip directly in the timeline of the hd on which it is recorded, audio imported. If I can remove the timeline and then try and drag it from the project don't sign... no audio plus.

  I deleted all the Cache files of the media directly from the Solution Explorer and leave everything again in line. I rebooted a hundred times, I cleaned the cache directly from first, I imported the footage into new projects... but now, each project behaves in this way...

  I'm tired of wasting DAYS trying to understand the problems with this software.

  Any suggestions would be greatly appreciated. Thank you very much.

  I can create a camtasia file to show what is happening.

  Usually its all in the correction of the source.

  

• Photoshop CS6 on Surface Pro 3 won't play no audio imported into the timeline.

  Well enough as the title says: I hear no audio imported into a chronology in CS6 on my Pro 3 of Microsoft Surface. I have Photoshop CS6 installed on my desktop PC and on my Surface Pro 3. Both play very well outside Photoshop, audio and audio plays fine within Photoshop, too. No idea why I have problems with the CS6 on my Surface?

  I uninstalled and reinstalled Photoshop, and the problem is now resolved. No idea how, but * shrug *.

• No audio imported after the first clip

  I have been dealing with this problem for about 3 weeks now. I can import the clip with audio when I import the first clip, but eventually all the clips have no audio imported into the project.

  It's weird. I have not found someone online with the same problem. I use Pro CC first.

  I'll probably have to delete the application and reinstall it, but I was hoping that there is an easier option.

  There are two messages. Don't know if they will help you. I thought I've seen messages like yesterday and the day before. The links do not look like they will work, but they are a copy / paste of the browser window.

  https://forums.adobe.com/thread/1572614?q=no audio after first clip

  https://forums.adobe.com/thread/1441198?q=no audio after first clip

• Breeze Presenter 5 - Audio import works is not in windows 7

  Hi all

  We currently use presenter Breeze 5, audio import feature does not not in the machine of windowns 7. But it works fine in windows XP machine. Can someone help me on this page or any suggesstion?

  Thanks in advance

  Sajjad.

  Well, there is no such thing as the Breeze or Breeze presenter. The products were renamed years to Acrobat Connect Pro and Adobe Presenter. Acrobat Connect Pro 8 is purchased as a hosted service or your own server. Adobe Presenter 7.07 is the last and Adobe Presenter 7.05 was the first version to support Windows 7. We recommend 7.07 as the latest version and you can buy this version. I don't think there is a upgrade price to move from 5 to 7. You would have to buy version 7.07 presenter.

• Audio imported slows or repeats

  Well, here I am again... upgraded to Captivate 3 on a powerful desktop computer and I have the same audio problem, I had with Captivate 2 on a laptop. What is the secret to importing WAV or MP3 files so they don't slow down or repeat on each slide?
  
  Audio files were recorded in a studio and released as AIFF files. I convert them into WAV and MP3 and have tried different settings for the conversion and in Captivate when publishing. Nothing works...
  
  If I use MP3 files in Captivate, they come out slightly slowed down when published (no matter what setting I use), so that the narrator's voice dropped an octave and speak more slowly than the original audio file. If I use WAV files and post them, they seem a lot, but the same audio file is repeated on every slide, any audio, I had placed on the slide.
  
  Can anyone help? I asked this question before, and no one seemed to know what I was talking or could not provide a solution. How in the world anyone has audio of Captivate to play correctly when published?
  
  Thanks (and crossed our fingers).
  
  Jim

  I think I solved this problem. The culprit seems to be not to maintain the same rate of encoder and sample rate when converting between audio file formats. I started with AIFF files with a sampling frequency of 48,000 kHz. I retouched as needed and then re-recorded (always as AIFF files) to a sample rate of 44.100 kHz. I used Final Cut Pro to do it, but any good audio editor will work (WavePad is an inexpensive and very good choice on Windows platform). Then I standardized audio and reduction of noise applied using WavePad (essentially by applying additional filters to make the best sound file), and then resaved the file as an MP3 file, with a flow binary Constant of 98 kbps (do not use Variable Bit Rate... Captivate can not handle it... It's one of the things I found led to idle audio or audio repeats). I also used a parameter that is the MP3 Mono file (my original files were stereo but Captivate doesn't seem to like stereo). So now, after you import the MP3 file in Captivate, do not use the Captivate audio editor to turn down the volume or edit audio. It also seems to cause audio problems when publishing. I do everything for the audio file outside Captivate first. Now, when you're ready to publish, be sure that your audio export Captivate is 44,100 kHz 98 kbps (that is, it matches exactly what are your MP3 audio files). So far, it has solved the problems of audio slowdown or repeat an audio file across multiple slides.

  I also found that instead of files MP3 with WAV in Captivate files causes major problems. I know it's weird because when you import MP3 files in Captivate, they are converted into WAV files then converted into MP3 when released. Go figure.

  It seems that nobody at Adobe or to one of the experts here on this Forum have never run into this question, because nobody had even a suggestion for how to resolve this problem. Odd. It happened whenever I used the feature to publish in Captivate 2 and now 3. It took me hours to try variations of each possible encoder, file format bit rate and sampling rate to finally find some that caused no problems for the Capitvate. The folks at Adobe had to spend some time 4 Captivate ensuring audio import and export functions are more stupid and can manage the files without any problems that occur. Not everyone is an audio wiz.

  Jim

• Movie maker audio import problems

  I created a slide show and imported into windows movie maker very well. Now, I'm trying to add audio. I bought a .mp3 at amazon. When I try to import it, I get the following error message:

  C:\Users\The Family\Music\Amazon MP3\Boston\Third Stage\01 Lentz - Amanda.mp3 could not be imported. Unspecified error

  Any suggestions?

  Hello steveb2009,

  The music file is protected.  This is why you cannot import into MovieMaker.  The second proposed link Chris explains the files protected by DRM.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• problem audio import in windows moviemaker

  I am trying to import MP3 audio files to Windows movie maker. Sometimes they work, sometimes I get an error message.  It just says: could not import the files, but no reason is given.  I downloaded files on Amazon and Rhapsody.  I get the same message anywhere, I buy the files.  Help!

  MP3 files can cause compatibility problems. Best
  bet would be to convert them to the. WMA format
  before you import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your MP3 clips on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Audio imported suddenly jump - Technical Support could not trouble

  In the days since the last update, audio (MP3 and m4a) files play correctly on other platforms. However, when I import them, they jump.

  Any ideas? It's never happened before.

  Try to convert the media problem to .wav using Audition files.

• Audio imported video m4v jumps into the RAM Preview and make, but in the original film file

  I import a video file .m4v in my After Effects project, and the sound jumps all random another second in RAM Preview and render output. However, the original .m4v video file plays audio very well when I play it on its own outside of After Effects.

  I use after effects CC 2014 on OS X 10.11.6. The video file plays fine in QuickTime and VLC.

  Any ideas? Thank you!

  AE does play very well with the audio compressed; Sometimes it is fine, other times it isn't.  Use a different application to export the audio as wav or aiff.  Import it into AE.  Disable the current speaker to your audio icon.  Add audio exported to the comp.  See if it works.

• Audio import is not with video related two files, but other work fine

  I registered a game using open source software of broadcaster and trying to change it for download on YouTube, but the audio of this game in particular will not import the video. I can see the raw images in a media player and hear the sound, but when I try and import it into Premiere Pro CC 2015, the audio isn't there. If I import an another games record, it works very well, has the audio and is good for editing and be downloaded. The game, with what I have problems is to evolve step 2 Beta.

  Hi DMartinGaming,

  You could try renaming the folder of media files, clear the cache of media and re-import. Not better?

  Let me know,

  Kevin

• audio import does not work

  When I try to import audio files the following is dispalyed: error message: the importer reported a generic error

  I just changed my first item 10 a new PC. On the old PC, it wasn't a problem.

  In my books I recommend to use only WAV files as your audio for better performance of the program.

  But note that some music tracks purchased (especially the securities purchased on iTunes) a digital rights management integrated that allows you to block by making music in a video project. When you try to use the music from iTunes in a Premiere Elements project (or pretty much any editor), the program will throw an error code.