audio interface for PC Win7

Similar Questions

• Audio interface for the voice-over

  I need proven suggestions and work on what type of interface I can buy that will allow me to do the voiceovers directly in Prem CS5.5 Pro on a Mac Pro

  I need to be able to use the balanced TRS or XLR cable. I have been using an M - Audio Fast Track Pro USB but interface for some reason, the Prime Minister doesn't.

  Thank you.

  Mac uses Core Audio Asio. The Fast Track Pro should be fine on the Mac with first. What are the audio settings under OSX?

  Eric

  ADK

• USB & Firewire audio interface ports still work as input and output?

  I guess everyone has to start somewhere, even if it is borne by almost everyone I would like to know the answer to my questions, perhaps with good reason, what I don't know is so if the USB ports unique connection and firewire on an audio interface function ALWAYS both as input AND output.  In other words, whenever I read the information about the product on audio interfaces, no matter where I go, it is generally accepted that most people buy their audio interface for RECORDING.  And so when most people talk about connecting their Apple computer, iMac or MacBook Pro, it is generally accepted, they turn to the USB as INPUT.  That's all very well and good.  But in my case, I want to use the USB port as output (not the taken mini) and go into an audio interface that gives me as a symmetric output signal that I can plug my amplified studio monitor (which has only a balanced XLR input). All of the examples I see with audio interfaces address registration and involve the use of the USB on the audio input interface.

  So my question is: can one USB port I see on any number of audio interfaces always function both of the inputs and outputs? It takes, but if so, why does any site mention this fact and whey didn't they show in all the diagrams of the audio interface manual hook to studio monitors?  I know what may be obvious to some, but as a user with the intention not to use a piano for a scene while but rather a keyboard/MIDI controller that is attached to the iMac to be able to use the virtual instrument software, I need to go to the controller to the iMac, then the iMac in symmetrical powered monitors. Do the balanced inputs of speakers requires more than a simple adapter to give the President a balanced input.  But nobody talks about audio interfaces usually unless they talk about as a way into the computer to record.  As for my situation? Why don't they include this example?  And why should they assume that novice will automatically KNOW that the usb port, an audio interface will work as an output as if they never EVER mention this example or Setup?  I guess it is to operate in both directions!  But really, I'm crazy to wonder when no one never speaks or shows this configuration? He suggested I buy something similar to a UR22MkII of Steinberg, who has a USB port. Even the Steinberg site speaks only records and so using the USB key as input for use with the recording software. There is no mention of its use out the mac in balanced speaker entries, even in the manual. In fact, it is question is always true for every audio interface manual that I watched, even by other manufacturers! Why they all assume a novice like me (whose money is just as good as money from the experienced user) KNOW that? It's frustrating!

  I know that this is not strictly a matter of logic, but I guess, in my view correctly, that a logic user community could be more appropriate to address my question for others communities. If I'm wrong, please help to re-send-the matter.  Thank you.

  Sound the interface itself that determines it can send and receive Audio or Midi... not the USB or FW port which both are devices of e/s...

  All USB and Midi peripheral FW are inputs and outputs

  All the USB and Audio FW are inputs and outputs...

  All devices USB or external hardware with a USB port... can handle Midi and Audio...  Some do... Most manipulate just Midi... or just Audio

  The Steinberg UR22MkII manages Audio and Midi...

  However, I do not recommend USB 2.0 audio devices... There are simply too many cases, problems and questions after the major updates for OS X with such devices especially when they are class compliant (IE without driver), even if the UR22MkII Steinberg is supposed to be compatible 10.11...

  View the other may vary... because it's just a personal opinion based on my past experiences both in my studio... and based on the many issues presented here and elsewhere.

  I'm sticking with Motu equipment for all my Audio devices... and I use iConnect devices for my Midi needs...

• Should what audio interface I use for GarageBand

  I want to start recording music with garageband, and my first purchase will be an audio interface. I intend to record instruments directly through the interface like keyboards, synth, vocals and guitars and ukuleles. I do not plan to register at the same time, my plan is to record a track, mix using garageband or other instruments and singing and then save top I'm going. so having a lot of ports isn't too important but I'd like to at least two. I want just an audio interface that will be compatible with garageband and give me his professional quaility. My budget is $ 350 just for the interface.

  any help is appreciated thanks

  I use Focusrite Scarlett, paid $199 Guitar Center, works great!  I record music and professional audio books.  There are more expensive interfaces, but cela do the perfect job!

• Find the Audio driver for HP dc7600 convertible minitowers PC for Win7

  Dear all Member,

  I have two HP dc 7600 and computer in minitour convertible HP dc 7800 PCs, recently I upgraded the old OS win XP of them for the new OS Win 7, I'm looking for drivers for Win7 in here, but until now, I couldn't find the Audio driver for Win 7.

  Some audio that I found them on the web for HP to be compatible with Win7 drivers, but they are unsupported when I installed them on my computer.

  You help me by sending the right link to download the Audio drivers for Win7 on HP dc7600, dc7800?

  Thank you very much.

  Chinh_Ng.

  Hello:

  For the dc7600, the best thing to do is to go to the realtek website and download and install the latest driver for the audio.

  Accept the agreement. Download and install the driver either the 1st or the 2nd on the list depending on whether you have installed W7 32-bit or 64-bit.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  I have a dc7800 CMT and I used the audio driver from the support page and driver and it worked perfectly for me, so I can't help you there.

  I used the one on the link below.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 3459240 & prodNameId = 3459243 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-75954-1

• Should what audio interface I buy for hearing CC?

  Hello

  I read a lot of these discussions, and you all seem very knowledgeable and willing to help noobs like me. I'm sure that you are tired of this issue because of the multitude of variables, but I'm looking to purchase an audio interface and I was wondering if you could offer some suggestions based on my needs, I'll try to describe in detail below.

  I just bought a Windows laptop, 10, with three USB 3.0 ports. I have Adobe Audition CC 2015 running on this issue, with errors [does not] does not happen when I click accidentally behind the multitrack to change the display too fast, or when I'm not wise in my use of the FX. What I can say, I'm learning!

  I intend to use Reaper to program the MIDI via USB cable directly tracks from a Roland TD11 and a Korg Triton Extreme to the laptop. I will then restore these files to WAVs in uncompressed and export it to the hearing.

  My typical workflow is solo titles layers, so I prefer to use the minimum amount of the strings and just spent the instruments, due to lack of space. I would like the ability to record at least 2 instruments at the same time however, in the case where the musicians invited stop. I don't plan to record live bands.

  These are the instruments that I use:

  -e-battery (it's possible I'll lines of audio recording in addition to MIDI tracks described above)

  -keyboard (same as e-battery, almost certainly will use as input line audio and MIDI)
  -Acoustic/electric guitar (I'll save variously in line or miked depending on what sounds better)
  -Acoustic/electric bass (line in most of the time, I guess)
  -lap steel guitar (line)
  -banjo, ukulele (mic)
  -singing (mic)
  -various percussion (mic) hand

  
  The only possible output I think I would need to interface is for helmets; I've lined up out of the laptop to a pair of speakers to test mixtures.

  In research on the interfaces, I stumbled on the MOTU UltraLite-mk3, which seems to take the load on the processor. Do you think it would be a good option?
  In fact I don't understand why you would need the 6 outputs however. They are all for monitors? I'm not clear on the difference between the level of the line, instrument, Hi-Z and these combined inch jacks XLR/quarter.

  Thank you for taking the time to read my it is true that the application of quicksand! I appreciate your expertise and advice that you care to offer.

  Best regards
  Sarah

  MOTU make excellent interfaces, as do other companies mentioned by SuiteSpot.

  The extra thought only I can offer is having only 2 microphone inputs would be a bare minimum and could become a limiting factor, if one of your guests musicians drop - you can, for example, records things like an acoustic stereo while something is happening.  I would consider putting additional money going MOTU would cost in an interface with 4 + mic.  Yet once, there is a certain choice.

  Or, for a direction totally different, since your goal is to have as many things as possible plugged in and ready to go, I heard yesterday on the new console Soundcraft Signature 12 MTK (Soundcraft Signature 12 MTK ) which would keep things hip as well set up headphone mixes and monitor mixes easy.

• Audio interface Thunderbolt to crash Windows Boot Camp

  Hello, my audio interface crashes Windows Boot Camp on my MBP 15 "retina. It works very well on the side of the BONE. I've updated everything (including the drivers and firmware for the device). The audio interface is the MOTU 828 x. It is designed for use with Windows via TB - my concern is that this does not mean Boot Camp Windows

  When I turn on the device, Windows crashes immediately on a blue screen saying: "your PC has encountered a problem and needs to restart...» PNP_DETECTED_FATAL_ERROR ". I tried all combinations of plug etc. aside first turned off, turned on mac.

  Thanks for any help or ideas!

  Run a test and reset SMC and NVRAM.

• How to change the audio output for the metronome

  Hello

  I would like to send the metronome (and speech signals) for monitors to the scene in the ear.

  I understand that I can do this in MainStage using different output for the above titles vs. the rest of the 'Concert '.

  I tried to follow the instructions of the Manual:

  Change the audio output for the sound of the metronome

  1. Choose the MainStage > Preferences > General.
  2. In the section of metronome on the general tab, choose another audio output on the shortcut menu to exit.

  PROBLEM

  1. on the general tab, only the outputs 1-2 are available/selectable (likely, these are also by default for all "Concert")

  2. Why is this process in the manual if it is not executable (without doing something to another additional Set up)?

  3. it's probably among the requirements of setting up more critical even easier for using MainStage with a live band, so why am I having to ask for help at all!

  Rant on (its been a long day)

  Grateful for any help to solve cela. I guess I can send the metronome (such as a click track) and speech signals on the same outputs, which are separated from the rest of the Concert... or should I change the outputs on the other tracks and keep the outputs 1-2 for the metronome marks / voice?

  Thanks in advance for all advice and my apologies for my frustration. JM

  To access the output audio, you need an audio interface with several outputs.

• Crackling with Thunderbolt resident Audio interface

  Hello

  I just bought a new Macbook Pro 15 inch retina, installed with El Capitan 10.11.4 and Logic Pro X, with a new interface reside Audio T4 Thunderbolt, and there is a cracking and sound distortion, crossing the input string. The output is very good. Sometimes the crackling can range from 30 minutes without past and other times it is constant. Unplug and plug cable Thunderbolt and change the port, it can do a little better or worse elsewhere. The crackling and distortion has also nothing to do with the entry levels. I tried:

  • Replace all cables (audio, stroke, etc.).
  • Disconnect other USB devices and even the power of the computer agreement. Also unplugged all other cables, including lunch, from the interface.
  • Purchase of an ALL-NEW resident Audio T4 interface, thinking the problem was inside the unit. It wasn't.
  • Update, uninstalling and reinstalling the drivers to interface
  • Turn off the Thunderbolt bridge under 'network '.
  • Make sure bit depth was the same on the interface and macbook

  I read on other musicians recording in trouble with DAWs and interfaces after the upgrade of the El Capitan, but not with this problem. This is my first time to go from a mac to a PC and am quite impressed so far. I'm grateful for any help.

  For me, when crackle happens "at any time", it is a good indication of low buffer I/O.

  Open CMD-comma logic preferences and click the "Audio" tab at the top. Then, make sure that you are on the "Devices" menu Input and output device are your interface. And nothing below your IO buffer size. try increasing this value to 128, 256, 512 and so on. In other words, the buffer is a small part of the memory where the incoming audio stream is buffered and the CPU can perform any processing required on this subject. If the CPU can't get enough data quickly enough, it starts to sizzle. More a buffer gives the CPU more time to perform a treatment. Usually, this is the case for systems with many things, for example, dozens of simultaneous tracks with many plugins active or slow systems. However, this is not the case for your new, shiny things unless you really have dozens of titles and many plugins per track. Or all of a sudden some background process kicks in and use the time processor and disk, such as a Time Machine backup and others.

  Make sure you plugged your audio interface directly to the Mac, not a hub or something. This introduces a latency and the buffer drains faster.

  Give it a try.

• Satellite Pro L650-15J (PSK1KE) - audio driver for XP

  I downgraded from Windows 7 to XP, and although my sound works I have the following in Device Manager error message:

  "Audio device on High Definition Audio Bus"
  The drivers for this device are not installed. (Code 28)
  To reinstall the drivers for this device, click on reinstall.

  Its interface is: Conexant SmartAudio HD CX20671

  I started by installing XP (with Service Pack 2) and then loaded SP3. From there, I installed all the different drivers on the web for this particular laptop.

  Whatever I do, I can't get rid of the error in Device Manager.

  Have anyone experienced this before and had fixed. I followed the recommendations of other posters of forum with similar problems, but nothing helped.

  Thank you
  Johannes

  Hey Buddy,

  The problem is that on Windows XP, you need to install SP3 first or two patches before installing high definition sound card.

  The forum contains a lot of discussions about this, then you must also use the forum search!

  So remove the audio drivers installed and make sure that SP3 is installed. After this visit the Toshiba page and download/install the latest audio driver for XP.

• Update iOS 9.2 ceased to iPad Air working with audio interfaces

  ios9.2 was last updated stopped my ipad, being able to work with my a peak interface. Unbearable noise on the two input channels when recording in GarageBand or other audio program.

  no solution of the next Apple or apogee. Grid have released at least a positive tovthe update software (even if it doesn't at least they try)

  I thought the score using such a product locked as an iPad mean everything should work together... how wrong I was.

  All solutions?

  P

  I know how it feels, bro. It happens again and again because Apple focus only on build-in apps without looking professional applications and the needs of professionals. I remember how I had to write to the bracket of Novation, because their audio interface no longer works with versions of Mac OS X. After each update Apple OS, something no longer works and we need to find alternatives to the result. And that is a problem. You can simply downgrade OS X, but you can't do the same thing with iOS.

  You only have the ability to write at peak and wait for the update. Apple support is more useless than Microsoft - it does not at all

• Satellite L670-1HD - problem with audio interfaces USB 1.1

  Hello

  I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro (http://www.mixvibes.com/content/u-mix-control-pro). These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
  When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (http://www.hercules.com/uk/DJ-Music/bdd/p/102/deejay-trim-4-6/), which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
  You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

  I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

  Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

  Thanks in advance for the help!

  See you soon,.

  Stefan

  Hello Stefan

  In my view, you see the problem from the wrong point of view.
  Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

  You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
  Something like that is definitely not possible.

  In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
  They should know how the device should work on new laptops with USB 2.0.

  It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.

• DIAdem 2010 not registered for COM Win7/64

  Hello

  my application creates an instance of tiara... New DIAdem.TOCommand...

  On Win7/32 it runs as expected.

  On Win7/64, I get the exception REGDB_E_CLASSNOTREG

  

  DIAdem is already running, the new DIAdem.TOCommand throws the same exception.

  Now when I try to close DIAdem it tells me:

  

  How can I use the interface TOCommand on Win7/64?

  Thank you

  GEMÜ

  DIAdem 2010 / Windows 7/64 / Visual Studio 2010 / VB 2010

  The problem is resolved.

  Tiara installation was corrupted.

  A repair installation has not changed anything,

  However full uninstall and re-installing brought success.

  Now it works now as expected, even with the setting of "any CPU".

  Thanks for your help

  GEMÜ

• Cannot install IDT high definition audio codec for HP envy 15 j002er on Windows 7

  Hello!

  I have HP envy 15 laptop j002er. Initially I got with Windows 8, but then I changed the Pofessional of Windows 7 (64 bit) operating system.

  I can not install audio codec IDT high definition on this subject. I guess that's the reason why I did not and I can't use the interface Audio Beats on my laptop (only the speakers work). There is no audio driver for Windows 7 available for download on the HP website. When I cheking out updates to the pilot via the HP support, it offers me only updates for graphic Chipset, network, etc... And no Audio driver...

  How can I solve it and install the audio codec IDT high definition? I hope he can help me use Beats Audio.

  Thank you in advance for the support!

  Hello

  Please try the following driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&softwareitem=ob-113849-1

  Kind regards.

• Download Audio Beats for HP ENVY 6-1011tu Notebook PC

  I did a clean install of windows-8(64bit) on my WANT 6 - 1011tu Notebook PC. My software audio beats has been completely lost. So please help me to get it back.

  Hello

  The Beats audio interface is provided by the IDT Audio Installer and it doesn't look like HP has yet released a version of Windows 8 for your laptop.  Try to download and install the version of Windows 7 on the following link.

  IDT Audio Installer - Windows 7.

  If the installation is done correctly, restart the laptop.

  Kind regards

  DP - K