Audio only importing do not

Similar Questions

• Audio only importing does not correctly - tried everything offered - still does not

  So, I imported the video 6 or so in first CS5.5 and listened. The audio is screwed up and stops randomly at half way through.

  Now, I had this situation before too with an MP4. The fix online was to rename it with the MOV extension and lock/read-only file, and it worked.

  This time, however, the file already is a MOV.

  I tried locking and its import - did not work.

  I tried renaming MP4, locking, and import - still same results.

  I tried to erase the cache media, several times - did not work.

  I tried to import other project - did not work.

  I even tried to CONVERT in Media Encoder to aac. Still does not work.

  What now?

  We used T5is of Canon DSLR to take all of our images. They are MOV files, and we were switch between modes of 1280x720@60 and 1920x1080@30 fps.

  p.s. I finally got around the issue by extracting the audio into mp3 files using the free version of AoA Audio extractor. This does NOT, however, resolve the bug, but it was urgent.

• New PC synchronization, import is not previous PC settings

  Just install windows 7 new PC. Previously introduced synch on the old Windows XP machine. New PC on signature resynchronize only importing is not all bookmarks etc.

  Hello
  Try to look at this page:
  https://support.Mozilla.org/en-us/KB/Firefox-sync-troubleshooting-and-tips

  Let me know.

• . Video AVI import does not correctly. Imports audio only.

  System: windows vista 64-bit

  Type of project: whatever the new draft standard is to the start screen

  Problem: I import files video .avi and they import audio only. It does not allow me to slide into the slot of the video on the calendar, and it only shows the speaker symbol in the media management area. This is the kind of funny. Previously, I used these files in another session June-July 2009, and they worked fine then. I'm lost and need help! (PLEASE!)

  Perplexed, like a fool

  If you look at the CODEC, it's Xvid version open source DivX, just as I suspected. These almost never work forward. The best workflow is to go before the Xvid compression (these are strongly compressed, lose a ton of data and quality), or to convert them to DV - AVI Type II with 16-bit 48 kHz PCM/WAV Audio files. I use DigitalMedia converter, but it is a shareware. Many users singing the praises of the Prism free to do the conversions. I've never used, but many here have and give it a very high rating.

  Note: no conversion program cannot recover this loss of data and quality. He is lost and gone forever. That's why my first option was to return before this compression is applied. However, conversion will produce files that can be modified both video and Audio.

  Good luck

  Hunt

  [Edit] do know not why/how they worked before. Usually, with the Xvid or DivX CODEC, you will get an error cannot import, or will get Audio or video only. I was never able to change any Xvid or DivX files in pre or PrPro - never, even once. I simply convert, if the client is unable to obtain the original source files, and I have even a diagram of loss of quality to show them how the film will look - not very good, IMHO. I make them sign on this loss of quality, before you start.

  Post edited by: Bill Hunt - added [change]

• Imported mpg convert to audio only

  When I import the athletic mpg videos and then try to transfer to the timeline for editing, they convert audio only, even if they are video files. What should do? Others won't matter.

  When I import the athletic mpg videos and then try to transfer to the timeline for editing, they convert audio only, even if they are video files. What should do? Others won't matter.

  ================================
  Might be worth trying to convert your video files
  format .wmv before import into Movie Maker.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Video does not load in the timeline, but audio only

  I'm trying to drag and drop my tray video media in the timeline. When I drag and drop there is no video. Only the audio file appears in the timeline panel. If create a new sequence of the video, it works very well. But now I can not add the video imported without encountering this problem.

  See here:

  FAQ: Why no audio or video will not at the track where I let down?

• . Import MP4 files in first 12 as audio only

  I've never had this problem before. Today when I tried to import some. MP4 files to the large external hard drive, where the video was recorded with a GoPro HERO3. Half of the records import in first 12 only audio and video is not displayed. It seems that files that have a. THM files which accompanied them. For some reason only half of the files on the seemed to have one. File THM that accompany them.  I have re-installed first, and that did not help.

  chosstronaut

  In post 11, I indicated that I have had no problems to work on your GPO30006.mp4 in first 12 Windows elements. I thought it was the example of the file that would incorporate audio nothing for you in the first of 12 elements.  You have now said that this GPO30006.mp4 was one of the files without a problem. So, good news, we agree that it GPO30006.mp4 present in the first 12 items as a file supported video and audio.

  Your GOPR0005.mp4 file that you confirm the problem (only audio import in first 12 items) file has now been considered.

  1. There is no problem it play in Windows Media Player or QuickTime Player. And I'm not picking up on any significant difference in the reading properties, MediaInfo or gspot programs, comparing it to GPO30006.mp4.

  2. but, I certify that your GOPR0005.mp4 audio import only in my first 12 on Windows 7 Professional SP2 64-bit elements.

  In the first 12 items, after you import the file in the active project, I think I have picked up on the heart of the problem. I propose that it is probably creating the timecode in the camera or some unexplained glitch in the reading of the first elements 12 of time code of the file. See the screenshot below and notice the display of the time code below thumbnail of the assets of the project for

  a. GOPR0005.mpg4 (audio only)

  b. GRO30006.mpg4 (works)

  c. Handbrake converted 'a' (work) .mp4

  

  My suggestion is to hold the hand brake GOPR0005.mp4, just go to the video tab and set to

  Video codec: H.264 (x 264)

  Rate: Same as Source

  dot the constant for the Frame Rate

  Then hit the start and monitor the queue completed in the progress bar at the bottom of the workspace of handbrake.

  http://handbrake.fr/

  Please check this on a clip of problem with a duration of more than a second.

  We will follow to your results.

  Thank you.

  RTA

• I do not see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not working, the video is blank (black) all, someone can help

  I don't update or download anything, so today, I can't see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not work, the video is all blank (black).
  When I restart my PC again the video can work just first video, then when I see another video site it's all black... (but its still working)
  can someone help me?

  Hi splingun,

  We have a section of fixing Facebook and YouTube. The black screen seems expressly included in the list of the articles I linked to you.

  Hope this helps!

• Audio import is not with video related two files, but other work fine

  I registered a game using open source software of broadcaster and trying to change it for download on YouTube, but the audio of this game in particular will not import the video. I can see the raw images in a media player and hear the sound, but when I try and import it into Premiere Pro CC 2015, the audio isn't there. If I import an another games record, it works very well, has the audio and is good for editing and be downloaded. The game, with what I have problems is to evolve step 2 Beta.

  Hi DMartinGaming,

  You could try renaming the folder of media files, clear the cache of media and re-import. Not better?

  Let me know,

  Kevin

• I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map. The only import option is 'copy', not 'Add '.

  I had a problem with Lightroom on Microsoft Surface 3.  I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map.  The only import option is 'copy', not 'Add '.  I worked around this by mounting a network directory containing photos and imported from there.  Is it possible to stop Lightroom to see such a map as a camera?

  I have not tested, but it should work with Lightroom:

  http://stltechtalk.com/ultimate-Ms-surface-hack-fully-utilize-micro-SD-card/#.

  Not sure what happens if you remove the card and put in a similar SD card. I would like to test it so that you know what to expect.

• CamStudio Lossless avi - audio is only imported

  Hi all

  I have trouble getting an AVI CamStudio Lossless encoded on import into Premiere Pro, wonder if anyone can help out me? I am completely new to PP, then it may be something to do with my project configuration! My video use LZO compression algorithm and exactly is 1280 * 720 pixels with mono audio 44.1 khz 16-bit PCM. When I use the import option in PP, I have audio editing of my voice-over appears, but the video window remains empty. The import is displayed on the left side with an icon representing a speaker next to it, which I guess means that PP believes that the file contains audio only... I tried to convert the entire file in an uncompressed using VitualDub AVI file, but the noise becomes very juddery and * I think * the video speed slows down as well.

  Any help much appreciated!

  There is no 64-bit version of CamStudio codec; number of 64-bit is required for AVI editing in first Pro CS5. See Lagarith or the Codec video Ut, who both the 64-bit versions that work well in CS5 and are very popular among users here.

• Audio only will import when you import a video clip

  When I import a video clip (any format) audio is imported.  However, the forecast of nail is still viable in the project window and I can even scrub through the video in the project window.  I was able to import correctly the other day and I don't think I changed anything.  I also tried some old clips I imported on other projects and I still have the same question.

  

• Windows Movie Maker plays audio only, from video files downloaded

  (I see other, similar types of questions about my problem, but none that fits 'exactly'.  So here we are...)  Recently, I used the Roxio VHS to DVD software to capture movies at home at my computer.  Files saved as .mpg files.

  When I tried to use Windows Movie Maker to edit some clips at all, I couldn't see any video (only the audio was playing).

  I used the 'compatibility', put options different filters turned off. but this does not work either.

  What should I do to solve my problem (and subsequently, to play these videos)?

  (I see other, similar types of questions about my problem, but none that fits 'exactly'.  So here we are...)  Recently, I used the Roxio VHS to DVD software to capture movies at home at my computer.  Files saved as .mpg files.

  When I tried to use Windows Movie Maker to edit some clips at all, I couldn't see any video (only the audio was playing).

  I used the 'compatibility', put options different filters turned off. but this does not work either.

  What should I do to solve my problem (and subsequently, to play these videos)?

  =====================================
  Movie Maker has problems of compatibility with .mpg
  conversion of files... files in .wmv format .mpg
  before you import into Movie Maker may be your solution.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your clips .mpg video on the
  main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  More info... This article treats your
  question of ' audio only ':

  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/mm2-importing-video-MPEG2.html

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Videos don't import does not correctly

  Hi, as the title explains the problem is simple.

  I am running the latest version of first Pro CC and my videos are not only import correctly, they play outside creation very well, but when I import into first they are black, about 1/20th the length, and have only audio (which seems ot be since the beginning of the video).
  Screenshot:

  
  The video in question is about 22 minutes long, but the poster up in like 1 minute.

  Video files are in the following format:
  1280 x 720 @ 60 fps
  Originally recorded with DXTory using the OpenEncodeVFW codec (which is obviously installed on my system), then crossed AVIMux to fix the audio. (Note that even the raw with audio file broke, until she walked the AVIMux has the same problem).

  My PC:
  Intel Pentium G2030
  4 GB DDR3-1600 RAM
  Club3D 14series AMD Radeon R9-270

  NOTE: The read files fine on Premiere Pro CS6. but not on the CC.

  So I finally have a (less-than ideal) solution.

  Get first: images of DXTory (VFW h.264 in an AVI container), I use the OpenEncodeVFW for AMD VCE for registration.
  Next: Use Handbrake (free), imitator of the settings, I record with, with the exception of a crucial, affecting the LOSSLESS quality (0). This prevents the loss of quality during this process (and I can confirm, you can't tell the original file and the brilliant new mp4 out).

  After that, the generated .mp4 file is recently fully recognized by the first.

• HP Envy J049TX: Beats Audio Control Panel is not start/work

  My Beats Audio Control Panel does not work. When I Open Beats Audio, a dialog box appears indicating that

  "IDT Audio from PC has stopped working"

  I have recently upgraded to Windows 8.1 and the only problem I found was that the Beats Audio Control Panel does not work.

  I also tried to uninstall drivers and reinstall it from the hp website, find my model number and appropriate IDT Audio driver software, but this does not work too.
  Already when I got windows 8, beats audio has worked, but as soon as I upgraded to this 8.1, this error.

  Hi @MegaArm ,

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your audio Beats worked very well until you upgraded to 8.1 Windows now, you get a dialog box indicating the "'IDT Audio of PC has stopped working". "

  You have tried to uninstall and reinstall the driver now prevail.

  If you go to Device Manager, what is the error on the audio device?

  Have you impossible to uninstall the driver or unable to reinstall the driver on the HP website.

  If you access the Device Manager can you right click on the audio and update the driver from here or do a driver roll back.

  Then, I'll try to do a HP PC - refresh your PC to solve problems (Windows 8) .

  The question must always be, if a recovery to factory.

  HP computers - performing a recovery of HP (Windows 8) system

  During recovery, you will receive an option to backup your personal files to avoid data loss. If you have not already done one, I suggest do you it now.

  HP computers - restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  Once you have completed this process do all your Windows updates.

  Now run the HP Support Assistant to acquire the HP updates.

  Here is a link to the Computers HP - update of Windows 8 to 8.1 as a guide to redo the Windows 8.1 update.

  Good luck!