Audio play back well on some devices, no other

Similar Questions

• Audio clips do not play back on the new devices from Apple and Android

  Hola,

  Successfully exported and load a video on youtube.  Unfortunately discovered audio excerpts do not play back on latest Android and Apple devices, but being of other clips.

  It doesn't seem to be any rhyme or reason.  a lot of audio tracks, but I only have a problem with the two voices.  and select clips on the two tracks do not play back - it's not all one and nothing on the other hand, some play, some don't.

  video and audio play fine on most devices and computers, but on a privileged few, these audio clips are missing.

  PP CS6, exported in h.264 mpeg file.  audio is uncompressed 16-bit.

  Help.

  Florian

  I don't know if it's kosher to answer your own questions.  Understood that after about 4 hours of troubleshooting...

  reduced to all THE AUDIO CAPTURED on a PARTICULAR DAY.

  in figures, this bad paired audio audio the other day who played back fine: wav 48 kHz, 16 bit,.

  found a thread (http://www.videomaker.com/forum/topic/audio-channelscancelling-each-other-out) that mentioned stereo audio where one side is out of step with each other, when read by a mono speaker (some apple and android devices, but not all) it will cancel out (can still be heard, soundtrack and effects).  When reading through the headphones or stereo speakers, you can tell that she is out of step.  Something trying to convert the stereo signal to mono cancelled the progressive audio funny.

  My dose was hard pan the audio tracks, solo, export only one mono aac audio, re - import the sound signal of a new track, and I settled for the mono voices above.

  hope this helps-

  -Yes, thank you-

  -your welcome

• No Audio playing back timeline!

  Since the installation of CS5, I can't any audio playback from the timeline.  The audio is indicated in meters and I can see the waveform in the audio channel but just no sound.  The track is not cut.

  The clip will play very well in the screen of the source, but as soon as his trained both the line nothing.

  Running Windows 7 ultimate 64 bit 24 gig of ram and using a black magic card. All updates applied.

  Any ideas would be welcome.  I see someone else has simular problems but its audio back on its own.

  I wonder if this is supposed to work this way.

• Audio clips of some clips plays do not, while others play very well. Photo included.

  If for some reason, while I was working on my project, suddenly the audio playing back fine stopped playing sound back.

  After trying to solve this problem (reset the caches, import audio, restart the computer) I'm here asking for help.

  After an hour of banging my head and google search, I noticed that the clips suddenly not work had a different color to them.

  On the left is the clips on the right and work no job clips.

  
  Could be the problem?

  Thank you.

  Data sheet:

  CS 6

  MacBook Pro

  10.8.4 OSX

  8 GB ram

  The audio files are .wav.

  

  Hello

  Thanks for posting on the forums. Please right click on audio clips that do not have sound and go to option channels Audio and in the channels of the Source tab select left and right respectively in the drop-down list. This issue may arise if you there is "none" option selected in the source of the string tab. Please update if this solves your problem or not.

  Thank you

  Vinay

• Help! I did a movie with pictures on Movie Maker, played very well. Now, it's just to show Xs red in the photos of some, but not all. What I am doing wrong?

  I did a movie with pictures on Movie Maker and played very well.  Now, it's just to show Xs red in the photos of some, but not all.  What I am doing wrong?

  When you save your project, and then rename, move or delete a photo next time you open your project, you will see a red X where the photo was. Just a click with the right button on the X and select Remove then import your photo again under the new name or location and click on save project on the file menu.

  In the menu task under finished film click Save to my computer tracking instructions and your project will be saved as a movie.

• Windows media player will not play videos that I created a few years back. they use to play very well; now, I received the acquired codec error message. I use wmp 11

  My old videos in my windows media player will not play. acquire CODECS rises. I get audio but not video for all the movies at home. Movies that I downloaded and clips play very well. How can I fix it. I use wmp 11.

  Hello satindoll11233,

  1. What is the exact error message you get when you try to play videos?

  2. What is the format of the videos that you try to play?

  3. are you able to play other files with Windows Media Player?

  Media Player will not be able to play video files, if there are no required codecs or video format is not supported by Media Player.

  I suggest you to check the format of the video you are trying to play. You can also try the steps in the article to resolve this problem:

  http://support.Microsoft.com/kb/926373

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Sound plays back faster look like "Chipmunks" of the 1960s. How can I slow down audio?

  I found out on Facebook that video that I took did not come through a longer with audio playing properly, but instead all audio is accelerated.  I tried online radio and other audio sites with all the sound speed.  How can I fix this.

  Hi Beverlybelle,

  Welcome to the Microsoft community. According to the description of the sound problem faster reads on Facebook.

  ·         Did you do changes on the computer before the show?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         The problem occurs with all online sites?

  I'll help you with this problem. I suggest you follow the steps in the article.

  Tips for solving common audio problems

  You can also read these articles for more information:

  No sound in Windows

  Sound cards: frequently asked questions

  I hope this helps. Let us know if you need help with windows.

• My video played very well yesterday, now, he will play not (only a black screen in preview).

  My video played very well yesterday morning, now it won't play.  I only see a black screen in preview.  Shake the black screen and it says "clip"stopped"I tried to start to play arrow under black screen, arrow of reading of chronology and play and play upward timeline option.  I can even change the duration for each slide, add and delete audio and insert pictures.  I can not however add a title no longer slide.  Help, please!

  My video played very well yesterday morning, now it won't play.  I only see a black screen in preview.  Shake the black screen and it says "clip"stopped"I tried to start to play arrow under black screen, arrow of reading of chronology and play and play upward timeline option.  I can even change the duration for each slide, add and delete audio and insert pictures.  I can not however add a title no longer slide.  Help, please!

  ==========================================================
  I can only imagine that you are referring to Windows
  XP Movie Maker 2.1.

  Some general info that may be worth a visit:

  Since the issue is recent... it may be worth trying to
  do a system restore to an hour before the beginning of the question.

  See the following article:

  (306084) how to restore Windows XP to a previous state
  http://support.Microsoft.com/?kbid=306084

  If you have automatic updates of Windows...
  possible that a driver has been downloaded and installed
  It's not as compatible with your system such as
  you already had. This sometimes happens with video
  Drivers. You can try a system restore or a driver
  Roll back

  (306546) HOW to: use the driver to restore roll back feature
  a previous Version of a device in Windows XP driver
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;306546

  Three possible causes for Movie Maker questions

  (1) the incompatible source files... (eventually... MPG or MP3)
  It is sometimes useful to turn off the filters.

  Tools / Options / Compatibility tab, uncheck all filters...
  also, it may be interesting to try left click on "restore all".
  Default button".

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) files source corrupted... the only solution for this would be to
  Remove the source files of the project one at a time and
  try to save each time until the problem file is discovered.

  (3) project is too big or too complex for system resources.
  Create several small projects... Save as WMV.
  Then re - import WMV files collected / drag in the timeline
  and record the final movie.

  XP Windows Movie Maker 2.1...
  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  XP Windows Movie Maker 2.1...
  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

• Video does not play back. Clips are blacking out.

  Not sure why my videos don't play back in the Viewer. Audio seems to be well - all of this. Some clips are "dead".  It has not been done until I stopped and restarted.  I stopped him because some clips were black in the clip project tree, while the timeline plays very well.  After stopping and restarting the computer, the clip project browser is a little better, BUT my calendar was wrong.

  Here's a video to see my videos and what's going on:

  https://youtu.be/HE6ni1Frka0

  I would try first choice of deletion, then eliminate all make files.

• Audio plays but video does not first Pro CC 2015.4

  This occurred shortly before, but recently it happens all the time, to the point where I don't know what to do. It seems that the more I use first, problems pop up more and more difficult to use. It feels like he's slowly killing my computer or something. But here's the latest:

  When I play back the video, sometimes just having a cup/change, sometimes playing, the video appears to freeze, stops the playhead moving, and the video freezes on wherever it was before reading, however the audio will continue to play. I can click around, recurs in the audio, but no video - it stays on the frame was for the first, he froze or will just go black.

  When this happened the first time that she would usually just take place when my computer seemed to be overloaded: I was at the end of a project with a lot of changes/titles/etc, did not close the program for a while, etc. Usually I could simply close first, sometimes restart my computer, and once I opened everything, once again, would be nice. Now, I'm at the beginning of a project and he does CONSTANTLY.

  If you need more information about me or have a workaround solution and can explain things to me as if I had no idea what anyone, it would be great because I'm not for most.

  First Pro CC 2015.4

  My drivers are up to date.
  

  I have a LaCie thunderbolt device plugged in with the USB 3.0 cable.

  I have Adobe first Pro CC 2015.4

  I have a Lenovo laptop using Windows 10 (* insert barfing noise *)

  Processor: Intel Core i7-4700MQ CPU @ 2.40 GHz 2.40 GHz
  Memory (RAM) installed: 8.00 GB

  System type: 64-bit, x 54 base processor operating system

  At this point, might as well try an 'off' Nvidia too.

  And if this doesn't work, I'd certainly a uninstall/reinstall process, using the Adobe... found CC cleaning tool here:

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Using this, completely remove the Premiere Pro and then download/install a copy of application of Office CC PrPro fesh.

  See if that helps. Now the cleaning process full of destroy all preferences & saved custom workspaces... well you copy those before closing. And my mind just froze... Normally, I know exactly where to look for those within a PC, they are in the users / (you) / AppData/Roaming/Adobe... I think so? No idea where Mac stores, but you should be able to search for it.

  Neil

• Satellite Pro L850 audio plays through 1 headset only

  I'm running the Pro L850 PSKG9A-009001 phone, which is a little over 3 months out of the box and the first audio went well when the headphones are connected. A few weeks ago, this changed, and now when I plug in my headset I get only audio through the headphone output A: I tried different pairs of headphones with the same result. When I use the headset in other devices, they work perfectly. What is important audio plays in stereo through the speakers of the laptop when there is no headset connected.

  I tried to reinstall the audio drivers realtek of the cd included, but can't find, and driver updates on the toshiba site. I also checked to make sure that this isn't a question of settings and I am unable to find a cause. I really wish I could hear the sound of the two channels and after trying everything I can think and isolate the question rightly the audio input jack; the feeling that there could be a problem of dry solder on the audio output jack.

  But I thought I was opening the issue to see if anyone has any ideas, I didn't think, who can quickly resolve the question, before I look at the supposed long process a warranty claim.

  I agree with you. This problem may be related to the port, audio output, especially if there is no problem with the internal speakers and if they do not work properly.
  Let's see which will show the other people about it, but what you can do now is to contact the nearest service provider of Toshiba, to explain the situation and ask for help.

• EA6350 - strange problem with DNS on some devices.

  My EA6350 has this strange issue where some devices, not all, are struggling to get the DNS, and I have to go back and manually configure DNS servers (I am on Comcast, so I use Comcast servers) in each unit carried out in order to get an Internet connection. (i.e., I need to replace the 192.168.1.1 provided by DHCP from the router with 75.75.75.75/75.75.75.76).  Looks like its something to do with some of my devices do not love how DNS gets proxied through this address by the router.  I've seen him have a problem on a Win7 PC, a PC Win10, a chromebook, an Xbox 360 and a couple of smart TV, but it seems not to be a problem on iPhones, iPads, a phone Win10, Win10 tablet, an other PC Win7, and one an Xbox.

  I tried to do a factory reset and reset of the router and flush the DNS cache on the device that would allow me to do, but nothing helped. My firmware is updated.  I also tried to set the static routes of the DNS on the router and that doesn't seem to help either.

  The interesting part about this is that it hit all of the devices in my house, just a few and it seems to be more prevalent on cable devices.  From what I can tell, the router receives its DNS Comcast very well (and as I said, there are a lot of devices that work).   Has anyone else seen anything like this?

  I think I solved my problem.  I did a factory reset on the router and don't update the firmware and now everything seems to work for all devices, even the most problematic.

  2.1.1.168234 is good.

  What that either version is later that it has problems.

• After the update of the app, can not read the store persistent on some devices

  Hello

  I have a problem in an application I was able to reproduce in a simple test application.

  The test application writes some info in the persistent store, then can read back and it seems to work fine.

  If I change the version number of the application, then download the new version (by downloading a jad file in the browser), he invites me to replace the old version w / the new version, which I confirmed. After you download the new version of the app, he invites me to reboot the device, what I'm doing.

  On most of the devices I tested this, after the reboot, when I run the app update, it works as expected - it can read the value written in the store persistent by the earlier version of the application.

  However, on some devices, it is unable to do.

  Debugging a bit, the error occurs when you try to get the object persistent via:

  PersistentObject po1 = PersistentStore.getPersistentObject(MY_KEY);
  

  This survey line an exception - exception message is simply 'null '. I don't know what is precisely the type of exception since it is a static method should not throw any exception that as far as I know, so I'm just catching a generic java.lang.Exception.

  The same - in the version update of the application, if the software tries to write to the store persistent by using the ID of the object, the result is the same - the call to getPersistentObject throws an exception "null".

  Note that I'm not changing anything this either on the object that is saved in the persistent store, and I'm not changing the identifier of object between the versions of the application.

  A device on which I can reproduce this issue systematically is a Blackberry 9800 (Torch) running 6.0 Bundle 2647.

  Any advice or suggestions how to debug this appreciated.

  I tried to reproduce this on a Blackberry 9800 (Torch) running 6.0 Bundle 2647, identical to what noted you above but find the code example you posted worked well.  Were there other changes between the versions other than increment the version number?

  Is - what happens on multiple devices or just one?  If it is just a device you can try to reload the software of the device in case anything is damaged.

• Windows Media Player cannot play back the video DVD.

  Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Original title: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  I was troubleshooting video playback issues throughout the morning after the reconstruction of a machine with a fresh install of W7 Ultimate, shot a few questions there.

  The first and foremost reason I couldn't play THE VIDEOS was due to the ATI Rage video card that was in the machine, proved that this card was not compatible for playback of DVD video on W7.  No problem with the system of video files (.avi, .mpg, .mp4, etc.), only reading DVD.  Disabling this card and media player running with a standard VGA device allowed me to play regular DVD movies very well.

  Another question, I stumbled on was with burned copies of the DVD, it turned out that my system DVD players, (2, one is a HP630E and the other is a typical ATAPI DVD DD internal 8 x 16), have a problem with playing movies engraved on DVD - RW discs.  Playing discs DVD-R worked well on this system.

  So in your case I try to disable the video device and let the system first use a VGA Standard, if your video plays well then check with the making of video for a updated driver device, saying "you have made any changes" does not mean that the system did not have a bad patch somewhere...

• Prime Minister - imported videos show slow images, audio plays perfect

  Hello!

  I recently stumbled on this after a reinstallation of my system. I have Pro CS4 first (with the latest updates, tried without updates as well) and the 64 bit version of Windows 7 (completely up to date).

  Here's the deal:

  After I created a new project, I leave everything intact, select only 1080 resolution NTSC (or PAL). I have imported video clips (has each audio and video clip), I want to work with. This import is fast and not mistakes... but when I really want to work with clips (for example: double click to start at the edge he or dragging to the timeline) what is happening:

  Audio play perfectly... but the video is like 1 images / 60 seconds or more. While the audio is just fine video plays really slow almost like a support of still images. And so, the length of a video on the timeline is correct the audio, but I get not even 4-5 frames of fotage video before the end of the clip. To sum up: video and audio is really out of step, but in a weird twisted way. Audio OK, increased or reduced speed is detectable, but the video (same btw) is not like that. He shows me some pictures before the time of the end of the clip.

  Is this a problem with the import?
  If yes how to correct?
  What kind of question is this?
  How to fix?

  Any ideas?

  My system features:

  Intel E8600 (3, 16GHz)
  8 GB RAM DDR3

  Gigabyte EX48T-DQ6 motherboard
  His Ati Radeon HD 4870 x 2 Vcard with 2 GB memory GDDR5
  Sound Blaster Xi-fi
  Optional integrated sound card (it doesn't help either)
  Windows 7 Ultimate 64 - bit version

  All my drivers are up to date, windows is up-to-date adope first pro cs4 is ORIGINAL! and up to date
  Disk Fragmentation per week, using Eset Smart Security 4 (so far) and cleaning registry windows every week.

  First of all uninstall each codec pack, you have already installed, unless you just reformat your hard drive, then reinstall Windows and programs.

  Then, convert it any codec's in there (Divx, XVid or other) AVI DV Ms type2. Use Google to find a suitable converter. Accept the quality hit you will suffer, but it is inherent in attempting to change broadcast formats, which were used exclusively to watch, is not editing.