audio playback on some slides, and not on others

Similar Questions

• My navigation links on some pages and not on others. All bearings have a link page, in the master page.

  My navigation links on some pages and not on others. Only 2 of my 7 links work on the home page, 6 of the 7 work on another, and on other pages, they work. They are all together in the master and are linked to their corresponding page. No idea why?

  Layers. There is other content on top of your navigation. Even the transparent part of the other objects will block the mouse events to reach your NAV.

  At this point you probably just 'Layer 1' in the layers panel. Content on the layer 1 on the master page will always be behind the content on the layer 1 on the page to that master is applied.

  Create a 'layer 2' (which will be on top of the layer-1) and go to navigation. Now the navigation will be on top of the element on the layer 1 on your page and these elements will block are more mouse events to reach your NAV.

• iPhone 5 loads some cables and not with others

  My iPhone 5 stopped to load with the original cable so I started using others and have had mixed results. It will load with an iPod Touch 5 g and an Anker 6' cable. It does not load with its original cable, an iPad 2 Air cable or Anker 1' cable. A technician has replaced the battery on my iPhone 5 and during his first visit, his cable did not work and on his second visit, it worked (even cable). With all the cables that do not work, I get the message "this cable or accessory is not certified and may not work reliably with this iPhone."

  Hello, SalinasEd!

  Thank you for joining the communities Support from Apple! I know how important it is that the iPhone is charging correctly with the cables. Looks like you; ve tried a few strides in using different Chargers so far. Take a look at this article here on If your iPhone, iPad or iPod touch will not charge.

  If your device doesn't load or loads slowly

  If you have a very low battery and plug in the power, a black screen or a black screen with a red battery may appear for a few minutes. Follow these steps and try again after each:

  1. Check your charge cable and USB adapter for any signs of deterioration, * as broken or bent pins. Do not use damaged accessories.
     
  2. Use a power outlet wall and check for connections between your cable, USB adapter and outlet or try another outlet closed.
  3. Remove all debris from the charge on the bottom of your device socket, then firmly plug your cable to charge your device. If the port of loading is damaged, your device probably need service.
     
  4. Leave your unit in charge for half an hour (if your device does not respond then Learn how to do).
  5. Force restart your device: press and hold the sleep/wake and home buttons at the same time for at least 10 seconds, until you see the Apple logo. So let your device for another half hour rate.
  6. If your device will not turn on or charge, grab your camera, the charging cable and charge adapter for an Apple Store or Apple authorized service provider for assessment. You can also contact the Apple Support.

  * If you are not sure if an accessory is damaged, take it to an Apple Store or the provider of services authorized Apple for evaluation or Contact the Apple Support.

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  If you are not able to solve the problem with these steps, it might be better to contact Apple directly by clicking on Contact the Apple Support to find the best way to solve the problem.

  See you soon!

• Microsoft error reporting occurs again with several service packs that need to be sent in an error report. This happens on some machines and not others on a school campus.

  I noticed this error that occur more frequently on multiple machines only when connected to an administrator account. The error on some machines, but not the others if they were all created from the same image of a HD master.

  I haven't noticed any malfunction of applications, but this error occurs, breed a little bit is set.
  Images of the error:

  http://imgur.com/delete/6acg8Ddt2V
  http://imgur.com/delete/3auBhSinkL
  http://imgur.com/delete/m1Po7IPlZE

  ddefreit,
  Because it is related to a deployment scenario and is involving multiple machines, you will need to check with the TechNet site for the appropriate support.
  http://TechNet.Microsoft.com/en-us/Windows/bb264763.aspx
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• App version 32 crashes on an automatic update on some iPads and not others

  Hey guys,.

  Can they relate my iPad app crashes when the automatic update for some iPads and not others? Don't know how to correct the problem. Any ideas?

  When you rebuild your v32 app and when you submitted it to Apple? Apps should be built after September 13. See http://status.adobedps.com/?p=732.

  Also, what do you mean by "Automatic update"?

  Neil

• How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.

  How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.

  You could try starting in safe mode:

  • Try safe mode if your Mac does not end commissioning - Apple Support

  Which can allow additional troubleshooting.

  Also, sometimes there may be a hardware problem which may help a SMC reset with

  Depending on the cause:

  • Reset the management system (SCM) controller on your Mac - Apple Support

  You can try the test equipment to see what appears in the results:

  • With the help of Apple Hardware Test - Apple Support

  Other options include an appointment with a genius of Apple Store or a

  service provider authorized Apple for the device inspected, diagnostic tests, etc.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  There may be system software or hardware problems, in order to solve the problems with the aim

  to see what the cause, can take time. If you have a backup in Time Machine &

  end by using OS X Recovery to see OS X Utilities usage, disk utility or

  other functions, be aware that this can make the more advanced features; It may not need.

  Because this question appears as a symptom in Safari, which makes it more curious.

  • Stop the pop-up ads and advertising on Safari - Apple Support

  http://etrecheck.com/ http://www.adwaremedic.com/index.php   

  There may be a weird extension in Safari that may relate to some adware or other

  elements, so this is another issue to consider. a report of Etrecheck may tell you if

  some candidates are there; but maybe not. I do not primarily use Safari

  so, my other two browsers work slightly differently.

  Good luck & happy computing!

• Xbox 360 xp streaming playback is often jerky and not smooth

  I have an xbox 360 and use Windows XP with the latest version of Media player.  The xbox has no problem to find my computer and can play music.  The problem is that reading is often very jerky and are not smooth.  Any ideas on how to solve this problem?

  Hi HEZEKIAHBACOVCIN,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  Method 1

  Try to reduce the hardware acceleration for audio playback and check if it helps.

  (a) click Startand then click Control Panel.

  (b) click sounds, speech, and Audio devices, and then click sounds and Audio devices.

  (c) click the Audio tab.

  (d) in the sound playback pane, click Advanced.

  (e) click on the performance tab, and then drag the Hardware Acceleration slider to none.

  (f) click apply , then exit each of the dialog boxes in the Panel.

  Method 2

  If the previous step fails, then manually, download and install the updated driver for the sound card on the computer by visiting the sound card manufacturer or computer manufacturer's website.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Frequently asked questions on audio and video playback for your Xbox 360 console

  http://support.Microsoft.com/kb/945416

• Pavilion Notebook 17-G012NA: Audio uses the laptop speakers and not a paired devices

  I have two devices paired bluetooth connected to my computer laptop, but audio still plays through the built-in speakers of Realtek.

  The device is introduced, my laptop confirms its she paired up and I do not see in the circles where I'm wrong.

  There is no problem with the associated devices because they work brilliantly with my phone and turntable.

  Everyone knows this?

  Thank you

  Hello @RG99,

  Welcome to the HP Support Forum's community!

  I understand your message that your Pavilion laptop - 17-g012na will only play audio through the built-in speakers and not the Bluetooth devices are paired.

  These speakers have worked in the past with this laptop? Have you verified that your system is up-to-date available throughout drivers and software?

  Microsoft has a background paper on connecting devices Bluetooth here and also a document of difficulty connections Bluetooth.

  I know from personal experience that some Bluetooth speakers and other devices, even when it is associated with, should click you on them to connect before it will actually start communicating with the PC.

  Please let me know how it goes. If this helps you to find a solution, please click on the button accept as Solution down below in this message.

  Thank you!

• Ideas for why HttpConnection works with some clients and not others

  Hi, I have an application that downloads and analyzes an xml file. This works perfectly for some users and does not at all for others. They can even access the XML on the web, but it won't work with my application. Some said they used a bold font, other OS 4.5. Here is an excerpt from my source:

  HttpConnection conn = (HttpConnection) Connector.open(url);conn.setRequestMethod(HttpConnection.GET);String _node, _element;DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder();docBuilder.isValidating();Document doc = docBuilder.parse(conn.openInputStream());doc.getDocumentElement().normalize();NodeList list = doc.getElementsByTagName("*");// .. parse data
  

  Edit: formatting is all messed up

  Not necessarily. You * can * make your app to use BIS-B if you are a partner of the Alliance and I recommend this, but this is not necessary.

  Your customers can also connect using WAP 1.1, WAP2 or direct TCP. I would recommend that you try WAP2 first, this requires no info gateway APN or WAP. You can get the WAP2 info directly from the maintenance book.

  Try the code in the example (in the white paper that I attached earlier).

  Your best bet is to develop some hueristics of network connection using the CoverageInfo class (see the documentation of the API).

  We are doing something like this, at the bottom of the list:

  BES

  BIS-B

  WiFi

  WAP2

  WAP1.1

  Direct

  I think that in the USA, CA, UK and Western Union, BES and BIS - B cover approximately 90% of users. Once you walk out of those areas, it starts to be more exciting.

• Audio in a timeline yet, but not the other?

  Hello

  I am trying to solve a problem in a timeline yet for Blu - ray with a MPEG2 and AC3 file.  It's weird because with the exact specifications of the same file for the video and audio, I'm able to hear the audio from the test project calendar (short term), but not the project calendar full length (about an hour and a half in duration).

  I'm burning a disk to verify that audio is just not there, rather than a problem reading with the project any longer, but can anyone suggest what may be broken here?  Again, the two projects seem to be identical in the parameters and specifications file for the video and audio, only the duration of a (work) is shorter than the other (does not).

  The audio file has been posted outside still like audio playback.

  Thank you for all what thoughts - what someone might have here.  BTW, the project has no menu screen.  That's a 'read only' Blu - ray disc

  Mtbakerstu

  That shows the status of transcoding of comics for each importing audio?

  Confirm that it is import and not dynamic link.

  How do you know that the file specifications are identical?

• Can receive text messages, users of Android and not on others

  Hi, I've looked everywhere and even phoned Apple customer service to try to solve this problem, but have failed.

  I can't receive SOME Android user texts but other ADCs. If it was all Android users it would be understandable, but just next to some really gets to me.

  I don't think it's something they do with their phones, they can all receive text messages on me, but I can't their stop. And I have many friends who are users of Android and I can't text and receive no problem what so ever.

  I also ask Android users can't receive messages off is they have problems to send to other people and they do not, its just me receive do not?

  I recently updated my phone from a 5 to a 6 s c iPhone more, however, I had the problem before transfer all my data across to the new phone.

  I tried all the things, said by Apple:-turn off iMessage, turn off face time and reset my settings on my network, but not it worked.

  I read on a forum that someone had removed all their messages the fact the above, and it started working. However, I can't do as I have information valuable message, that I need for work.

  Please please someone tell me there is a fix for this I really don't know what to do and am missing or maybe lack valuable text messages that I need for my work.

  Thank you

  Them

  Make sure you have not blocked people.

• Why my message a confirmation of reading on a device and not the other?

  I use my iMessage on my iPhone 5 and my Macbook Air, however, sometimes when I send a message from a device it shows a read receipt to the other person on my mac, but not on my iPhone. The message on my iPhone remains as "delivered" much later and then seems to be read (I'm done yet receive confirmations of reading on my phone), but my mac delivers the message, and it seems that the message has been read afterwards, but it shows the path of the read receipt before my iPhone don't. I don't know if it's just one little problem and they have not actually read the message, or if my mac book is somehow showing the first read receipts?

  Hello

  It has to do with which ID is used to send the iMessages and what devices are then synced to see this info.

  Device sending roughly see the pronouncement to feedback.

  If it's the Mac using the Apple ID it will 'see' the 'read' first response.

  However, if the Mac uses the iPhone number to send, then some info can run on the iPhone first it's the device the number belongs to.

  The Mac is only then light "Copies" of the synchronization version.

  Add to that the fact that some people will have a device set to join read receipts and not another.

  It is basically not a precise answer that there are many factors that can influence it.

  

  20:45 Thursday. 26 May 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Why the HDR toning work with some pictures, but not for others?  I have CS6.

  I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

  HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

• Is it possible to work with JavaScript in JUST ONE TAB and not on others

  I usually browse websites with javascript is disabled. But sites like facebook and youtube need javascript. So what I really want is to just run these sites on legs with active javascript and run the other tabs without it.

  Try noscript. It can be a pain to get the installer at the beginning because you need allow all areas that you want to allow JavaScript for, but that market either tabs or windows.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/NoScript/

• Captivate 8 - characters Media display during playback of the slide, but not published

  I placed characters in my content to display for specific times.  For example, one pointing to an article for the period of time and then pointing to another way for a period of time.  They are stacked one on the other, dealt with and that they fade in and out. When previewing a slide, they play / display perfectly.  However, when I saw ' the project' or ' this Slide"or publish it as a .swf, they do not move.  Only the first character in the first hour is displayed for the duration of the entire slide.  I spent tons of time trying to figure WHY?  Can you help me?

  Indeed, chronology confirms totally what I suspected.

  You have two interactive objects: a button (button_3) and a box of text entry, which are both stopping the timeline at 1.5secs.  Any object whose chronology starts later that 1.5 seconds will never be until the button or the ETB have been used and the playhead is released.

  What did you do with this button and TEB? The TEB chronology ends even before the appearance of the second character (table of contents are the label) at 9secs.

  In case you're wondering why the slide audio plays on: once it starts to play, he will continue even when an interactive object is at the point of suspension. Audio slide will only be suspended by a real Pause command.