audio sync after export problems

Similar Questions

• Audio goes out of sync after export (PP CS3)

  Hey there!

  So I had a few problems with first Pro CS3. My main problem is with the audio goes gradually out of sync after export. I am trying to export in 1440 p (2560 x 1440). I export in h.264 with 60 images/s.

  1. Original file type: AVI
  2. Original Frame height and width: 1680 968
  3. Original Audio bitrate: 1411 kbps
  4. Original Audio sampling rate: 44 kHz
  5. Original frame rate: 60 fps
     Data rate: 1191254 kbps
  6. Total bitrate: 1192665 kbps

  Before installation:

  

  Can someone help me and tell me what are the audio settings I should export in correlate with 1440 p and 60 frames per second? Any help is much appreciated, and I look forward to your responses.

  Much appreciation,

  -David

  What codec is used in this avi (as it isn't a regular avi of a camera) and if the framerate is variable, you need to convert to constant framerate before importing it in first.

  Converter for example Handbrake.

  Bit rate may be too high. Don't forget that CS3 is pretty old.

• Matte & low - audio sounding after export

  Hello

  I am editing in Premiere Pro CS4. If you see the images below, it will tell you a little more about the system and the parameters I use. I gave my client a DVD and she complained the audio. I asked him to send me a description of what she was not happy, and she wrote this: "with audio, the sound quality was lost, it was not loud and clear. And the base and the beats were very low. Came out very thud '. Now, I agree with her. One of my fellow editors that uses another system produced a video and immediately I noticed the sound was wonderful. I could feel the base and hear several instruments.

  My original audio peaked like this:

  

  I asked someone what was the best level to set in and he said that he peak at-6. So now my audio picks like this:

  

  After the filing of the complaint, I asked a few more people, and they said that the green audio level should be level 6. So now my audio picks like this:

  

  Now I don't know if the settings above have solved the problem, but at least on the computer, it sounds better.

  It's the Premiere version I use:

  

  This is some info about my computer:

  

  Properties of the file prior to export:

  

  Properties of the file after export:

  

  Project settings:

  

  

  

  Here is my export settings:

  

  

  

  I hope that is enough info and I appreciate all help. Let me know if you need me to gather more information.

  --------------------------

  Now, I agree with her. One of my fellow editors that uses another system produced a video and immediately I noticed the sound was wonderful. I could feel the base and hear several instruments.

  --------------------

  My question is, "How can I get my audio to sound more gutsy (base more, harder,)"

  ------------------------

  you accidentally fall in love with talent?  Is not of the never before seen in the film industry... where criticism becomes something "personal" between the Director / shooter (you) and talent...?

  Perhaps you could get closer?

• Audio/video Out Of Sync after export

  Hello, I hope I gave enough information below. I searched high and low for an answer to this and can not find a solution that has helped.

  I have an audio problem be out of sync a few images when exporting.

  First Pro Version CC using 2015.3 works on a Windows 7 PC with 16 GB of RAM.

  Source footage is Panasonic Lumix g-7 MPEG Movie wrapped in .mp4.

  Rate of the source footage is 59.94

  No external codecs are used.

  Here is a screen of the properties panel to one of the source images files in Windows.

  

  Here is a screen of the sequence settings

  

  Here are the screens of my export for video and Audio settings

  

  Here is a screenshot of the properties of one of the image source files window and the properties of the sequence.

  More large window - properties of the source images

  Small window - properties of the sequence

  

  However, the problem does not occur when I check the "Match sequence settings" at the top. I want to make so files won't be as big as when I pay with these settings. Just looking for YouTube, but even this preset produces the problem, I'm going to.

  

  Any help is greatly appreciated!

  The problem seems to be that I was unaware of a 2 ms latency when recording with a wireless LAV microphone system. I moved the audio advance 2ms and the delay has disappeared.

• Help!  Audio goes out of sync after export.

  OK, people. I need your help. I have a looming deadline of THIS FRIDAY to put this.

  I have a multicam editing over a show that runs 1 hour 20 minutes. It renders perfectly in the timeline panel, all the video and audio perfectly synced. Looks and sounds exactly like what I need.

  When I export the video in form file H.264, audio not get synchronized with the video of 13 frames! But that's not all... It doesn't go to the complete audio track. There are about 50 minutes in the middle of the video where the audio goes out of sync. The audio at the beginning and end of the video is aligned perfectly in sync. It is just the central part which is twisted.

  What should I do?

  This has never happened before, and I have worked extensively with multicam in first Pro CC before that. Never been a problem. I tried to uninstall and reinstall the first and also remove all media cache files, but still no dice.  I also tried to copy the clips in a new sequence in the same project, copying the clips into a new sequence in a NEW project, the nesting of the sequence... nothing works.

  My configuration:

  MacBook Pro retina (Rev A)

  First Pro CC (latest version)

  Panasonic GH3 images in 1080 p 24 p AVCHD timeline

  3 cameras & 1 audio file to WAV in Multicam

  Any help would be greatly appreciated!

  OK, I figured out how to fix it:

  1. In first Pro CC, choose SEQUENCE > DELETE RENDER FILES.
  2. Try to export the movie again.

  It worked! I exported the same sequence, and it took a lot of time to do a new rendering of the audio files, but when it was finished export audio and video are in sync. I don't know what caused it, but this fix, so I hope anyone else having this problem can save a lot of time in reading this.

  See you soon!

• Problems of stuttering and sync after export to the H.264 format

  I edited some AVCHD videos in Premiere Pro 5.5.0, made of a sequence of 5 minutes and exported to H.264 to Vimeo format, using the guidelines of Vimeo:

  NSTC

  1280 X 720

  29.97 FPS (like the shot)

  Progressive

  Square pixels

  CBR 5 Mbps (tried pass VBR 1 and 2 pass, without any difference)

  AAC audio

  44.1 khz (from original 48 kHz)

  320 b/s

  Bitrate priority (tried these frequencies, first of all, no help)

  Export plays well in VLC player 2.0.1 into Quicktime and after download from Vimeo, audio plays, but the video stutters and is often out of sync.

  If it makes a difference, MacBook Pro, 9 GB RAM, Mac OS X 10.7.3

  Any ideas?

  I actually thought it might be your system.  That's why I asked for the Vimeo link.  It only would be not the first time he stammered for the poster, but not for people who have test.

  Restarting seems to confirm this.

• Quality image after export problem

  Hello

  I have a problem of quality after the export of the image. for example in one case, I make a modification, especially at the level of sharpness of an image, after when I exported the JPEG image, there is a large drop in sharpness and more noise.

  Knowing that the adjustment of export level everything is good in quality years 100% and type pour inking of high office.

  NT: the quality of the Exported JPEG image is the same as the quality of the image in the library and not in development tab.

  Thank you

  There are several problems with your settings. The detail panel sharpening (NET ') and the noise reduction controls should only be paid in Zoom 1:1 Mode. The amount of sharpness (Gain), detail, brightness and contrast are too high. Adjustment brush sharpening (NET ') setting 100 is compensated by the noise of 100 (noise), so little local sharpening is applied. Also the moire ' and fringe 100 parameters must both be left at 0 (OFF), because they serve no purpose for the sharpening of the premises. Please try the settings below and evaluate the results in development and library modules View Zoom 1:1. If having the same problem please download the raw export to DNG on Dropbox or other image file sharing site files and I'll try to decide the issue.

  For more help and tutorials in French please look on this link: training for Lightroom, assistance and support. Adobe Photoshop Lightroom 5

  

  

• None of the audio keyframes after export

  Hi guys,.

  First of all, I'm a bit new to AE, it's my first project and also my first post on the forum then... Please go easy on me.

  Now I have this audio layer I want to add as a soundtrack to the video intro that I did. The audio is a little longer than the intro, so I added 2 keyframes at the end of the audio to act as a bland out (I decreased sound levels of + 0.00 dB - 19, 000 dB).

  The problem is when I export the project, I do not hear this faiding. It's like the AE doesn't "read" keyframes audio 2. (When I hit play within the project, with RAM Preview, I can hear the fading, but not when exporting). I forget that I export the project as. FLV, like. AVI exporting much larger files.

  I don't know if there is any sense to you guys, but it is what it is.

  I have attached a screenshot so you can see keyframes, I want to talk to.

  Thank you!

  

  Convert the MP3 to a WAV file in an external tool and replace the layer as a result. Also, depending on the format, the correct audio fades can require-36 dB or - 48dB perfect silence.

  Mylenium

• Audio sync after the Edit

  Hi guys,.

  I have a question about the workflow - is it possible in first?

  1. I save the video and audio separately.

  2 do the editing with video files first (scenario A)

  3 synchronize audio with video files (scenario B)

  Is there a way automatically 'to' timeline B chronology A synchronized audio files so that I can read the A timeline with audio correct without manual synchronization?

  Hi Tomasz_CC!

  Here is a possible workaround. (I do this suggestion without anything about your project.) Basically, I would say a workflow / offline but rather broad proxy files, you will be connect to your synchronized clips.

  Here are two links that explain the concept of/off line and reissue of links in Premiere Pro:

  Create clips for offline editing in Premiere Pro

  Reissue of links media offline in Premiere Pro

  Here is my solution:

  1.) export your synchronized clips of "timeline" B with the EXACT SAME file names and the SAME EXACT duration. Having the same file name right is critical for the reissue of links in batches. Otherwise, you need to connect the elements one by one. With the same guarantees of exact duration that the content of your synchronized video files will correspond to the version not synchronized. You may need to cut your audio synchronized to video clips before you export. Export the synchronized versions of the video files to a new folder and name it "Synchronize" or similar. (This assumes you have enough storage space for this new medium.)

  2.) make a duplicate of your project. (Just for security.)

  (3.) in your project duplicate, select video files in your project, right click and choose «Make offline...» ». Choose "Media files remain on the disk" in the window to make offline.

  4.) with your video files still selected, right-click and choose «Link media...» ».

  5.) in the link Media browser, check the "republish other box automatically. Click search, and then navigate to the folder 'Synchronize' with your exported synchronized video files.

  

  6.) turn on the "display only exact matches name" can help you locate the clip to bind.

  

  7.) once you have located the clip, press OK and all the video files in your project and "A chronology" should be linked to the synchronized versions.

  I hope that makes sense! Only, you will know if this work around is to have to re - edit. Good luck!

  -Sean / first Bro

• How to make a dvd with an audio track after export using the media encoder? I have 2 separate files?

  Hello

  I just burn a video that I have completed. It's a m2v file and so I have a point of view audio AC3 and a video track. I thought I was ready to go, but I can't understand how to burn audio and video on the same disk. It's very embarrassing because the settings I should use for export to keep video quality will give me 2 separate files.

  So, what programs you use or recommend I would like to add an audio track? I don't want people to have the ability to switch between tracks, I just want a normal life trace that you have when you watch a movie, I mean he's playing just by default.

  Thanks to the adv.

  Mark

  Again is Adobe for DVD software, although there are others.  In General, the export of the elementary streams for use in an authoring application is the preferred method, then you are doing things.

  Specific help again, I would do you for the help file again.  If you decide to use another application, its own set of instructions will guide you.

• Audio out of sync after importation. MOV

  Audio issues out-of-sync after you import a clip .mov in Premiere Pro.

  The .mov video the problem doesn't have a problem when played with quicktime or vlc: audio fits perfectly with the video.

  Adobe Premiere Pro 7.2.1 CC (4) on OSX 10.9.1

  Open the first new project... > OK > import the single video clip (either by dragging in the app, or by using the media browser). Start to play the clip in the Source monitor, rub with impatience. Result: audio and video are way out of sync.

  Clip .mov, the origin of the problem has been exported to the Silverback app.  http://silverbackapp.com/

  Details on the clip .mov, via Media Inspector app:

  ============================================================

  General

  Full name: /Users/jukeboxhero/20140203.mov

  Format: MPEG-4

  Profile format: QuickTime

  Codec ID: qt

  File size: 638 MiB

  Duration: 34 min 46 s

  Overall bitrate: 2 566 Kbps

  Encoding date: UTC 2014-02-04 06:52:45

  Marking date: UTC 2014-06-02 15:55:40

  Library: Apple QuickTime

  Video

  ID                               : 2

  Format: AVC

  Format/Info: Advanced Video Codec

  Format profile: [email protected]

  Parameters of the format, CABAC: No.

  Parameters of the format, Reframes: 2 images

  Parameters of the format, GOP: M = 2, N = 30

  Codec ID: avc1

  Identifier of the codec/Info: Advanced Video Coding

  Duration: 34 min 46 s

  Bit rate mode: Variable

  Bitrate: 2 449 Kbps

  Width: 1 920 pixels

  Height: 1 080 pixels

  View picture format: 16:9

  Frame rate mode: Variable

  Rate: 18,969 fps

  Minimum frame rate: 6,522 fps

  Maximum frame rate: 19,355 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  /(pixel*Frame) bits: 0.062

  Stream size: 609 m (95%)

  Language: English

  Encoding date: UTC 2014-02-04 06:52:46

  Marking date: UTC 2014-02-04 15:27:35

  Primaries: BT.709 - 5, BT.1361, IEC 61966-2-4, SMPTE RP177

  Transfer characteristics: BT.709 - 5, BT.1361

  The matrix coefficients: BT.709 - 5, BT.1361, IEC 61966-2-4 709, SMPTE RP177

  Audio

  ID                               : 1

  Format: AAC

  Format/Info: Advanced Audio Codec

  Format profile: LC

  Codec ID: 40

  Duration: 34 min 45s

  Bit rate mode: Constant

  Bit rate: 104 Kbps

  Nominal flow rate: 128 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling frequency: 44.1 KHz

  Compression mode: lossy

  Stream size: 25.9 m (4%)

  Language: English

  Encoding date: UTC 2014-02-04 06:52:45

  Marking date: UTC 2014-02-04 15:27:35

  ============================================================

  The video matter perfectly in Final Cut Pro 10.1.1

  I have Premiere Pro of the trial and the Final Cut Pro trial. If there is no fix or get around easily, I have to give up the first.

  > Frame rate mode: Variable

  No version of first does 'good' with Variable rate

  Below is on iphone, but can help

  Some people find that the Iphone will not edit easily because it uses a variable rate

  -A possible solution in the message #22 http://forums.adobe.com/thread/934466

• Problem: video downgrades the quality after exporting

  Hello world!

  IM new and this is my first question on the forum.

  Now, I created 10 succesful videos with Adobe Premiere Pro, editing Gopro videos 1080 p 60 fps.

  My new video, I started using my phone Samsung Galaxy Neo S3 content.

  The problem: after exporting my video, the quality of Gopro videos is like 480 p, but I still want the quality as the original, 1080 p 60 fps.

  What I need to do / how can I solve this problem?

  Relevant information:

  Laptop specs: Windows 10 960 M from NVIDIA, Intel core i7.

  Export format: H.264.

  I tried already rendering in modes: Youtube, Vimeo 1080, Match source 1080HD high flow, I ticked the box "maximum render quality".

  But nothing is done, the quality of the videos Gopro changed as 480 p after the export of the video.

  Please help me.

  Although I have not any more wise, I found a solution on Youtube.

  In my calendar, there is a yellow bar. I had to click "sequence" and then "render outside". Then the bar turned green.

  Then I had to select the export mode: HD 1080 p 29.97 fps.

  Then, as in my first picture, you can see "basic video settings".

  You can scroll down here, and there is also a "fps rate" which was 30 (automatic).

  I had to change at 60 frames per second. It is also recommended to check the box "made to maximum depth" in the audio and video tab.

  The size of the file push double (200%), but the quality is good as it should.

  I want to thank you for your efforts and help.

• Voiceover first clip of bad quality, after export only. Audio effects involved. How can I fix it?

  All the sound quality is as desired in the timeline panel during the first edition. After export, the first clip in voice-over ONLY, now has a dominant white fuzzy noise. If I delete this clip and export, the clip that was the second, but now first, inherits the problem.

  The video below has the original "first music video" removed, to show that the problem persists in the new video for first, which was previously the second and previously sounded very good. Each "phrase" or an "expression" is on his own audio clip, on the same track.

  Also note that the sound quality of the music is great in each. In addition, the quality of the voice is perfectly fine in all the remaining 3 minutes of video.

  From what I can tell, it's like audio effects have not been applied to the item first, after export. I use DeNoiser, dynamics and Volume of the channel in the whole of the audio track of the set (as opposed to each individual clip) voice. When I apply effects to each of the first 3 clips and place them on a separate track, and export, all 3 clips have the problem of white noise.

  I guess that the effects take some time to 'register' and so when effects are applied to the entire track this should happen only once. But just who does not sense that this is a permanent problem or every video ever made by creating using DeNoiser and dynamics would have this problem!

  What Miss me? There must be a way to solve this problem.

  Here is a screenshot:

  

  I use version creative Cloud, Adobe first Pro CC 2015

  I exported with the following parameters:

  H.264

  Format AAC, AAC Codec (tried MPEG and Dolby as well)

  48000 Hz

  Stereo (tried MONO as well)

  High quality

  320 kbps bitrate

  Bitrate priority

  Make maximum use

  
  

  Thank you.
  

  WORKAROUND SOLUTION:

  I used both your advice to a solution that WORKS. Simply, I moved all the audio on this track 5 seconds back and insert an audio clip arbitrary at the beginning of the track. I then exported audio on one. WAV file. I imported the. WAV file in the project and trim the beginning (with the arbitrary clip) back to what is supposed to be the beginning of the audio.

  The arbitrary clip inherited the problem and the remaining clips are great. They reside on a track that has no effects applied, as the. WAV files retain the proper sound quality.

  Also, I've read just after this operation that checking the box "Freeze" can cause the denoiser to apply instantly. I've never tried, but if it works, it's probably a simpler solution.

  Thank you.

• Audio loses sync when exporting to DVD.

  Audio is in sync until I have to export and read on DVD. Someone knows how to fix this? Thank you!

  kristay

  Thanks for the reply.

  You can enter problems to export a calendar from 16:9 to 4:3 export. So, we need to focus on this point.

  Please do the burn DVD-Video on DVD with preset = DVD NTSC_Widescreen_Dolby and determine if the audio sync problem has disappeared.

  I think it should be, but, if not, then go us back and look at the other details of the project.

  Thank you.

  RTA

• 7.2.1 audio export problem

  There seems to be a new audio program with the 7.2.1 update, which was released to solve another audio problem introduced with the 7.2 update.  The previous problem is discussed in another thread.

  http://forums.Adobe.com/thread/1357792?TSTART=60

  The 7.2.1 update seems to fix the buzz loudly during transitions, but now a new and unwanted sound occurred for some users.  This is a machine - like noise that occurs only during the period of transition and only after export.  The problem seems not to occur at all inside PP.

  For me, it was incredibly difficult to reproduce this problem.  Initially, I found the problem by chance.  Try to make it happen at will took about two hours of experimentation.  I could only reproduce the error by using very specific media in a very specific way.  Namely, a clip of 60 p following a 24 p clip in a specific sequence of 24 p.  Almost everything that I changed would not reproduce the error.

  One thing I noticed is that the only export by SOUL produces the error.  Direct export was clean every time.

  Workaround is to disable the import of native Premiere Pro sequence in the preferences of the SOUL.

  SOUL preferences > General > uncheck "enable native first import of Pro sequence.