Authendication PPP with an ADSL connection

Similar Questions

• VPN site-to-site with pppoe ADSL connection

  Dear

  I would like to know - is it possible to connect two 5505 ASA in VPN site-to-site with 1 site using the pppoe ADSL connection?

  A (static IP) site

  Site B (ADSL pppoe, DHCP)

  Site has < site="" to="" site="" vpn=""> > Site B

  Best regards

  Alan.

  Configuration of site B should be the same as all the other side than peers with static end.

  The different configuration would be on Site A as he will accept a VPN to a dynamic counterpart.

  Unfortunately, I have no configuration example to show you on ASDM.

• Satellite A200 - 24 - need help with ad - hoc connection

  Hello

  I have a Toshiba Satellite A200-24 which is connected to the internet via ADSL.

  Also, I have a laptop and I want to share internet between them in my apt.
  In Win XP it should do so through the Connection Wizard, but in vista, it is "ad hoc connection".

  However, when I try to do, I get a message that windows cannot create my new network.
  I have searched all over the net for a solution and those who have the same problem as me.

  Have computers with Satellite...

  Hello

  I think you should check this page:
  http://www.LyteByte.com/2007/02/21/how-to-share-one-Internet-connection-with-another-computer-using-Vista/

  Here you have find some information and details (screenshots) how to share one Internet connection with another computer using Vista?

  This page could also be interesting:
  http://thehiddenguide.com/how-to-share-two-computers-with-one-Internet-connection-on-Vista/

  Please post comments!

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• Once a problem with a mobile connection, whenever I try to open a specific site mozilla redirects me to the support of vodafone page, how can I have access to nooz.gr

  After a problem with a mobile connection, I tried with mozilla to connect to nooz.gr , but I've redirected the page services of vodafone, everytime I try again to open this site specific mozilla still redirects me vodafone support page, how can I regain access to nooz.gr?

  Could clear you cookies and cache and check it out.

  • https://support.Mozilla.org/en-us/KB/how-clear-Firefox-cache

  The problem happened when you connect your mobile connection he tries to display the service vodafone page, and it is not updated because of cookie issue.

  Try in safe mode

  • https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode

• Seeing orange blinking after that stop with the charger connected.

  Hello

  I'm new here and I have the following problem.

  Four months after buying the PC (Satellite-Z930-103) I had a battery problem. Suddenly the orange led blinking and the laptop could not be launched. Toshiba service replaced the battery and everything worked fine for about two months. Then the same thing happened again. Because I was working in China, I opened the laptop and disconnected the battery and can be used with the charger connected.

  The PC was sent to a point of service when I arrived at home, where they still indicated a battery problem and offered to change the battery. Because the warranty was expired, I had to pay for it. I refused, because the price they were charging was 300 euros.

  To the surprise... when I received it from the point of service, they have reconnected the battery and the service report said "computer does work well, no fault found '...

  Since I started my fight with Toshiba support and tried to find me a solution. However, the problem was not resolved until today and I have to disconnect the battery and plug it in again after waiting a day every time I forgot to unplug the charger when the shutdown or when he goes into sleepmode) I became an expert at opening and closing of the laptop...

  In any case, maybe someone has the same problem and found a solution, I suppose that it may be a software problem, but Toshiba has not solved until today.

  To describe the problem even once:

  Orange (power) led starts flashing as soon as the computer is powered down (or "standby mode") with the charger connected.
  If this happens, I opened the laptop and disconnect the battery (so I can work with feeder pugged in)
  Then the next day I open the laptop again and re-connect the battery. It works fine until I still forget to unpug the charger, turn off or restart the laptop.

  I'm guessing it's a problem of software and a few simple arrangements or a re-installation of something, it can be solved.

  Because I travel a lot, I love the little thing but I got frustrated at the moment.

  It would be great if I'm right, and someone already had this thing resolved!
  THX advance for any help!

  Peter

  Satellite Z930 is very nice machine designed for mobile use and I am really sorry to hear that you have such problems. I imagine that you can't find some identical threads on this forum so I hope this isn't a "general problem" with this machine.

  I am not a technician but I can't imagine this problem described has something to do with the settings of the software. In the BIOS, you cannot change a large part and in windows, there is a standard Windows power settings and several Toshiba avancΘs.
  Electronic power placed in the motherboard has a few 'standard' functions and switch automatically between battery and power running.

  I can't say for sure, but I guess there must be some problem with electronic power supply. It is not easy to say what the problem is here, and I really wonder that Toshiba service provider was not able to identify the reason why all this is happening.

  Let's see what the other members of the forum think problem described.

• Loading slow web page and with Airport Extreme connection speeds

  About 5 days ago, I noticed a significant slow down the loading of web pages. In some cases, I see a blank white screen for up to a minute before the page is loaded. In others, the page never loads at all. And sometimes they load very quickly as expected. This happens with my iMac that is connected to a router via ethernet, as well as my Macbook Air connected via Wifi to Airport Extreme.

  I have a high-speed internet connection by cable Comcast/Xfinity: Blast 250Mbps.

  I tried to connect my iMac directly on the model of cable (Arris Surfboard SB6183), and there is no problem. Download speed was 30Mbps 300Mbps and upload.

  Then, I plugged my Airport Extreme router again and connected the iMac to the router via Ethernet. Download speed dropped to 100 Mbps!

  This suggests that the problem may be with the Airport Express. It is not a wireless problem, because as you can see the download speed went from 300Mbp/s connected directly to the model 100 Mbps when connected to the Airport Extreme.

  How do I troubleshoot/fix this?

  One last thing: I did a speed test with my Macbook Air that is connected via Wifi and the Airport Extreme router. Download speed dropped to 35 MB/s.

  Direct connection to the modem is so very fast, suggesting the internet connection Comcast isn't the issue. Speed falls even with ethernet to the Airport Extreme router connection, then decreases even more with the Wifi connection.

• My Macbook 2012 mid pro with thunderbolt is connected to the tv via a Macally MDHDMI adapter.  Visuals are delivered as planned but no audio.  Can anyone suggest why no noise please?  And maybe a fix?  See you soon...

  My Macbook 2012 mid pro with thunderbolt is connected to the tv via a Macally MDHDMI adapter.  Visuals are delivered as planned but no audio.
  Can anyone suggest why no noise please?  And maybe a fix?
  See you soon...

  Have you checked system-> Sound-> output preferences to see if you can select the HDMI output?

• Satellite A660-13D - I can't go 65 Mbps with the wireless connection.

  + Sorry for my English is not my mother tongue. +

  Hello

  I expose my problem:

  I can't go to 65 Mbps with the wireless connection. I can't move this connection speed.

  Configuration of the laptop:

  * Windows 7 Ultimate 64-bit (with all updates installed).
  * All the updated drivers correctly.
  * With the latest version of the BIOS.

  Router:

  * Tp-link TL-WR1043ND, installed at 3 metres above the laptop (without obstacles).

  The router configuration:
  * WPA2-PSK AES.
  * 802.11n
  * Maximum output power.
  * Channel: 11 (not automatic, that this channel is relatively free).
  * Width of channel: 40 Mhz.
  * Maximum tx frequency: 300 Mbps.

  Other information:

  The wireless card drivers are correctly then updated (ver. 5.60.48.35).
  * The router has updated the firmware.
  * I tried all the settings of the wireless card.
  * Bluetooth off (without interference).
  * {color: #ff0000} there are other computers on the network that connects 150 and 300 Mbps (with the same network configuration). {color}

  Thanks in advance,
  Greetings.

  Post edited by: Xibalba

  Have you tested using different channels?
  Have you tested speed WIFI connected to another router?

• Having trouble with my internet connection through wifi. N600 router is what I think.

  I had some problems with my internet connection recently via my wireless router. I get the little triangle yellow and with the connection at different times and I can't call my local internet provider because it still works when they are open, and then it closes when they are closed. I recently bought a Google Chromecast and some think it might interfere with the connection, but I don't see how. When I reset the modem router and cable by unplugging and plug their return they sometimes get the rear connection but it's annoying not knowing when it will go off again, then come back. A few months before the connection out sometimes but not several times a day. If you need additional information such as the type IP DNS stuff I can get it. Also recently I have updated the firmware of the Netgear if that makes a difference. Thank you!

  Thanks to all who responded. I talked to my ISP and discovered that the modem was abandon the connection because he was old and he sold me a new and things work fine now. Thanks again!

• Satellite T110-10R with Realtek 8187se - connection drops on battery

  Hi my friends,
  There is a big problem with my laptop.
  WLAN signal strength: very good
  other laptops have these questions in this network.
  Yes, here's my problem:
  ca mode, there is no problem with the wireless connection, but on battery mode, my wlan keeps disconnecting connection, disconnection, connection... sometimes, this occurs several times in a single minute! It is quite painful and embarrassing.
  This happens with different network wireless, tried different ones - not only my home network
  my system:
  Toshiba Satellite T110-10R with Realtek 8187se
  Windows7 64 bit.
  here a brief overview on the things I've tried
  -Update BIOS!
  -Update driver!
  -Reinstalled operating system!
  -power options: max performance
  -even in all power options, I put a maximum performance for the settings of the wireless adapter, on batteries, too
  -Properties of the wlan in Device Manager card, I disabled the option: allow the computer to turn off this device to save power
  -in the same window, advanced, active 802.11 d

  Well, despite the fact that I have this problem on my home network AND other networks, I tried following things on my router at home:
  -updated firmware update
  -reset the device
  -no automatic IP (don't know the correct English term) - that I put on my laptop, too
  -wlan changed to 802.11 b, g, b, and g, also tried wep
  WLAN - channel set to auto and not auto, try different channels
  -turned off all power saving features

  ... as you can see, I tried everything I KNOW...
  Maybe, you guys have something for me that I didn't...

  Well, hopefully, someone can help me with this problem...

  > ca mode, there is no problem with the wireless connection, but on battery mode, my wlan keeps disconnecting connection, disconnection, linking

  According to my experience, this has something to do with the old driver and power saving.
  Depending on your message, this happens only in battery mode. So in my eyes, he pilots s/issue of energy saving

  I found some interesting documents:
  + Wireless network card not working anymore after the change from AC to battery mode power +.
  http://APS2.toshiba-tro.de/KB0/TSB12033K0001R01.htm

  + Wireless network connection disconnects when the AC adapter is removed. +
  http://APS2.toshiba-tro.de/KB0/TSB12033H0001R01.htm

  The second doc recommends updating the driver Realtek WLan may be, you can also try a page from Realtek.

• How to join a web server with a GPRS connection?

  Hello

  We have developed a cRio Datalogger and we control in a control panel with the cRio connected to our LAN.

  Now, we want to make the connection even the cRio with a Modem - Router Multitech GPRS (a Multimodem with DynDns capabilities). The problem is that our GPRS service provider gives a private IP, so we cannot access the cRio from the internet.

  We did a test with a sample that comes with Labview, a TCP connection multiclient, we run the vi client in a PC connected to the internet with GPRS Modem and server in another PC in our local network. The perfect example is run. In the vi client we have added a few indicators to indicate the network address a remote port, but we cannot open a table of customer order vi from the computer running the vi server, using the collected information. The network address, it is not an IP number is a name and to our surprise, the remote port number is different than the port used by the example.

  Conclusion, we can make a TCP/IP connection if the communication is started by the device with GPRS Modem, but we cannot do the opposite. The problem is the same to have a web server running on a PC in a LAN and want to access it from the internet without having access to the router configuration.

  And because the remote connection of façade is started by the PC who want to open us cannot operate.

  Any idea is possible, we want to do this?

  With the help of:

  LV 8.5.1

  Thank you

  Hello

  We solved the problem by using a SIM with mobile broadband enabled. With this service, the cell phone company has an IP address public (here in Argentina).

• PC will not boot past the home screen with USB HDD connected?

  Please read the entire post before suggesting a solution.

  Mobo: ASUS P8Z68-V LX, on the latest version of the BIOS.  Eight USB 2.0 ports, two USB 3.0 ports.  Intel i5 CPU. 8 GB of DDR3 RAM. Graphics card is NVIDIA GTS 8800 512, and I have a GTX 960 FTW on the way. Corsair CSX500 PSU.

  Model reader problem: WDBHML0040HAL-RK

  -J' ordered this drive of Studio 4 to WD outside of eBay for $109, used. The drive has been used previously on OS X, and I had planned to use it between two Windows 7, 10 and 10 OS X via dual-boot.
  -Boots PC regularly without the connected reader, but it hangs at the splash screen, if the player is connected to one of my 10 USB ports.
  -I can't not to enter the BIOS with the drive connected, and if I get into the BIOS without connection, BIOS freezes as soon as I make it connect.
  -I went into the BIOS, (with the device / disconnected /), and external hard drives moved to the low boot priority. This had no effect.
  -The PC recognises the drive if it is connected / after start. I can copy files to and from the disk without flaw.
  -When it is received, the disk has been formatted with a face-to-face 200 MB EFI system partition, (I have no background knowledge about it), with the rest ~3.5TB unscathed HFS + space.
  -Immediately, I formatted the partition HFS + and it separated in exFAT and NTFS.
  -Deletion of the EFI partition to command line has no effect.

  Someone online says that this is due to the ASUS P8Z68 trying to boot from the drive and to disable "Legacy USB Support" from the BIOS, but my knowledge of the ways all USB devices are disabled, including keyboards. I am doing a FULL disk formatting and will update the post I have try these solutions.

  I'm really in a bind here, guys. In all, any help is appreciated.

  Solved myself. I went back to the basics:

  The drive is 4 TB and I'm trying to use it as exFAT, for compatibility purposes. exFAT supports up to 2 TB per partition. The solutions are either break the 4 TB drive halfway, or to use the NTFS system.

  For the record, I chose exFAT.

  Marking this question.

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• Problems with the internet connection, Aspire V15 - V3 - 575G

  Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

  The problems are the following:

  • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
  • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

  He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

  I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

  Thank you very much for the reply.

  Plese try this:

  device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.