Seeing orange blinking after that stop with the charger connected.

Similar Questions

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• The digitized files disappear after that scanning with HP Solution Center update

  The digitized files disappear after that scanning with HP Solution Center update

  Have a HP Officejet Pro L7590 all-in-one.  Under Vista 64-bit.

  Updated my Center of solutions for version 14.  Now when I scan something, it scans OK then when I save to file it away.  Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.

  Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.

  Have tried uninstalling and reinstalling several times.  Does not work.

  See you soon!

  Hello

  Two questions actually related to each other.

  Please, try the following:

  Make sure that the HP Solution Center is closed.

  Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .

  Move this file to a temporary folder elsewhere as your office, just to backup porpuses.

  Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.

  Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.

  Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.

  Please let me know of any changes.

• "Error - a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner"while trying to scan using HP G4050 on windows 7

  A problem prevented the document are analyzed. Windows 7 - HP G4050 scanner.
  I have a HP G4050 which worked fine with Vista.  After the upgrade to Windows 7, I get the following error when scanning:

  A problem prevented the document are analyzed.  Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner.

  I get a different error during an attempt of an overview.  It starts to get an overview of the page, gets about 2 inches to the bottom of the page and then I get the following error:

  An error occurred when you set the properties of the scanner.  If another program is scanning, please wait to complete, and then try again.

  I downloaded the latest driver (and reinstalled several times) of HP with no luck.  No errors are recorded in the Application events.

  I'm going nuts trying to figure out this one!  Thanks for your help.

  BT

  Update:

  I finally had time to unplug the scanner, wait 60 seconds and then plug it again.

  Problem solved.

  Scan of stupid...

  BT

• How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  I have only:
  D: / images (where are necessary + not need files)
  -a list with only the necessary files
  -a list with new names for the files needed
  Thank you.

  Hi Pustiu,

  Thanks for posting in the Microsoft Community.

  You want to know how to select the files in a folder using a list with the files you want and after that rename only the files using another list with desired new names.

  I would have you post your query in the TechNet forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Please, he

  I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Help, please

  I looked everywere in my computer, but they are not found

  I bet that you have selected the folder Adobe Bridge CC or CS6, and it would be in there under Program Files/Adobe/or Program Files (x 86) / Adobe /.

  Move to... in the file Explorer apply only to records not the bridge program.

  You open Bridge and Photo Downloader allows you to move pictures from your SD card in the deck (also called import)

  Gene

• After affects that can create a visualizer that goes with the music for Winamp, Virtualdj, Dj Sofware ETC.

  Can you help me after affects may create a visualizer that goes with the music for Winamp, Virtualdj, Dj Sofware ETC.

  
  

  or y at - it a plugin to convert?
  

  N °

  Mylenium

• After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop ""»

  This is windows vista business.

  After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop. ""» I tried to find out latest fashion good and safe, but still the same. Help, please.
  Is it possible from a different drive to boot and then by applying some changes that would stop it. At the time when the computer is unusable, it just starts to "configuration updated 3/3" then restarts.

  Hello

  Try these methods.

  Method 1:

  You have to do a cold start, press and hold power for a few seconds (10).

  Wait a minute or two and turn it back on.

  Make sure that "all the" non-essential devices are disconnected. (USB keys (for example, flash drives) or any other external media like this takes place.).

  If you can, start safe mode.

  Start your computer in safe mode with network.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  NOTE: see 3 from the link above, Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Select Mode safe mode with networking.

  Method 2:

  Use the system restore feature:

  (a) click Start, type system restore in the Search box or search programs and filesand then click on the system restore under the programs section.

  (b) on the System Restore page, click Next.

  (c) select a restore point during which you know the operating system works, and then click Next.

  The restore point should be a date that precedes the first time you encountered the problem.

  NOTE: If you use system restore when the computer is in safe mode, you can't undo the restore operation.

  See also: error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer when you try to install updates for Windows

  http://support.Microsoft.com/kb/949358

  Data loss caveat:

  Be sure to back up data that you want to keep before you begin. This is to ensure that there is no loss of data.

  Method 3:

  Step 1:

  To avoid this problem on Windows Vista, obtain and install update 937287 from the Microsoft Download Center separately from all other updates on Windows Update site. Install the update that applies to your version of Windows Vista so that you are able to install future updates.

  A software update is available for the Windows Vista installation software feature

  http://support.Microsoft.com/kb/937287/en-us

  The following files are available for download from the Microsoft Download Center:

  Windows Vista x 86 systems

  http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=15287

  Windows Vista x 64 systems

  http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=23732

  Step 2:

  Save the update to a location on your hard drive, you can find and then install the update from there.

  Download, *Save* and install the update with no security (antivirus/security suite) software installed, disconnect from the Internet, disable the firewall & close all non-essential processes in the Task Manager.

  Disable antivirus programs and firewalls.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I also recommend taking off of USB keys (for example, flash drives) or any other external media, as this takes place.

  When the file is downloaded, see these steps.

  (a) right -click on the file and

  (b) select run as administrator from the menu.

  Check if it helps.

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How I replace the toolbar firefox... and remove the toolbar that starts with the MOST VISITED and SUGGESTED SITES

  Somehow lost the toolbar that has the page back arrow and refresh and stop icons. How can I replace those and remove a toolbar that starts with the MOST VISITED and lists several SUGGESTED SITES.

  Hello kittyheckel, please see the Navigation buttons such as back, home, bookmarks and recharge are missing. You'll want to disable the bookmarks toolbar and enable the navigation toolbar.

• can't activate windows xp with the product key that came with the computer

  I got a computer of 510N HP Pavilion from a friend who was absolutely riddled with viruses and malware of all kinds.  Every thing I did to clarify apparently nowhere got done or made it worse.  At the end of the day, the computer would only begin to restart, stop after the start of the HP logo screen, then start to boot, etc and more.  All I could do was to install the hard drive in another computer and format, from scratch.  Now, I'm trying to install the system to XP op for the disc that came with the computer.
  the problem: the code the product key on the case went wrong with the disc.  After searching for solutions, I found a code on the disk by searching the files it contains, tried and it worked!  Problem is when I try to turn it on, it says it's an "unauthorized product key."  I tried to enter that code on the box and who says he is "invalid".  The Cd look authentic; are for distribution with new pc HP and Compaq.  After a further inspection drives are XP Professional SP2, while if it is XP Home Edition.  What gives?  Activation does not anyway. It is any use that will not make me buy a new set of disks?

  Please let me know if more info or detail is necessary.

  PS - only a single piece of hardware has been changed - the cdrom initially provided with the computer was bad, so I went out to perform the installation.

  When you perform a restore to the factory on some HPs condition you have two choices: 1) a restoration which keeps your data and programs (in a repair installation); (2) a full destructive restore which brings back the machine to the State, it's when you first opened the box. In your case, you have already wiped the drive, so the question is moot. I would call the HP technical support. Normally when you use an OEM recovery media (HP, Dell, etc.) a product key is never required during the restore. If you have used the media to restore HP shipped with your system and are always asked for a key and one on the sticker machine is not accepted, then something is certainly. MS - MVP - Elephant Boy computers - don't panic!

• When you watch a movie on netflix after that 10 minutes, the screen turns white

  original title: when you watch a movie on netflix after 10 minutes, the screen goes white, I can hear the movie but not see it. How to stop going empty?

  When you watch a movie on netflix after that 10 minutes, the screen becomes white, I can hear the movie but not see it. How to stop going empty?

  If I move it, it comes back. I went to personalize and click never. I know you if it's ok now!

• The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  I tried all listed in other postings, but our VSphere 4 server resides on a SQL server server.

  I tested the connection odbc with the SA password and it works, it rebooted several times now, tried to stop all services and bringing up one at a time, but whenever a dependency is not. I get this error in the system log, the VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  And

  VMware VirtualCenter Management Web Services service depends on the VMware VirtualCenter Server service which failed to start because of the following error:

  The service has returned a service-specific error code.

  Application log says this

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  I don't know how to fix it. It was working fine yesterday. Nothing has changed. Or has anyone experience this problem and have a solution?

  see if that helps

  http://KB.VMware.com/kb/1015101

• I want to stop with the 'TEST' user base

  Hi all
  
  I use Oracle 11.1.0.6 / Windows XP.
  I want to stop with the 'TEST' user base, that I created in the database.
  What role/privileges, I need to assign to the user 'TEST' for the stop of the database with this user.
  
  Thanks in advance.
  Anil

  Hello..

  Satish has already provived the link to the oracle documentation. Go trough it.

  The same doc: -.

  >
  When you connect with SYSDBA or SYSOPER privileges, connect you with a default schema, not with the schema that is generally associated with your username. This scheme is SYSDBA SYS; for SYSOPER schema is PUBLIC.
  Connection with administrator privileges: example

  This example shows that a user is assigned a different schema (SYS) when connecting with the SYSDBA system privilege. Assume that the sample oe user has been granted the SYSDBA system privilege and issued the following instructions:

  CONNECT oe/oe
  CREATE TABLE admin_test (name VARCHAR2 (20));

  Later, oe user makes these statements:

  CONNECT AS SYSDBA oe/oe
  SELECT * from admin_test;

  OE user now receives the following error message:

  ORA-00942: table or view does not exist

  After having connected SYSDBA, oe user references the SYS schema, but the table has been created in the oe schema

  >

  Anand

• The "permanent" that come with the Nike watch complications on standard watch faces?

  The "permanent" that come with the Nike watch complications on standard watch faces?  I see this question has been asked before, but not yet received response - did someone know the answer please?

  No one has a new watch. They will not be shipped before seven. 16. then go to your local store to get an answer to your question.