authentication Microsoft Active Directory iDRAC 7

Similar Questions

• Can OBIEE on UNIX OS - we use LDAP using Microsoft Active Directory for UNIX OS?

  We are looking at options to run OBIEE 11 g on a UNIX server.

  Can we use authentication using Microsoft Active Directory LDAP for authentication OBIEE?

  Short answer: Yes.

  Longer answer: Yes you can. Operating system has no influence on that. All you need is the ability to connect to LDAP, and it's pure networking.

• Oracle Forms and Microsoft Active Directory

  Application server = 10.1.2.2.0
  Database server = 10.2.0.3.0
  
  We have a connection to a database (for example abcd/abcd@abcd). The login is in the formsweb.cfg file.
  
  Users click a URL that opens the first form (10g), where they must enter their username and password. The "When-new-form-Instance" trigger will use the data entered to check the username and password is correct on a users Table. It will also recover the level of security for members of the staff.
  
  If authentication fails, a message in a form and they can not go further.
  
  If authentication is successful then the first form of the system is displayed. The level of security is used to decide what forms/States are available for this user and the data that is displayed. The user ID is used throughout the system to save the changes made by the user.
  
  We went to Microsoft Active Directory and I have a requirement to allow a user to simply click on a link and the application opens with the data and access. I also need the user ID in the application.
  
  Is it possible to either from the Microsoft Active Directory for the Oracle Forms user ID or is there a way to recover it from in Oracle Forms.
  
  Thanks in advance
  Michael

  I seem to remember that we did in an installation of web Forms6i a few years ago.

  We used the ONE LOGON trigger to invoke the DBMS_LDAP package to interact with the microsoft server active dir.

  There are several ways to do it now with SSO also.

  Tony

• Using Oracle with Microsoft Active Directory database

  Hello
  Because of too many nodes, we have in our company communicate each other (using the old files tnsnames.ora), we are now in the time to find a central location to store our net service names.
  I know that we can use for this OID to store the names of Service Net, but my question is it possible to use Microsoft AD, because our infrastructure using Microsoft AD as a central point.
  I have read the documentation oracle Oracle® Database Platform Guide (Chapter 12 Using Oracle Database with Microsoft Active Directory), but the problem is what happens if my database is not on the Windows operating system (such as Unix/Linux, we have number of it).
  I also read the document Oracle® Database Net Services Administrator's Guide (Chapter 3 Configuration Management Concepts) where you will find statement on the end of the chapter:
  Oracle supports Microsoft Active Directory only on Windows operating systems. Therefore, the client computers and the database server must also run on the Windows operating systems to access or create entries in Microsoft Active Directory.
  
  From this text, it looks like that my only option in this different environment with multiple operating systems is the OID (I wish it isn't true).
  
  Thank you

  Dragan,

  Sorry for the late reply. Since once it has clearly mentioned in the white paper that IO is a must; If you want to use MS AD, because 'oracle white paper' means 'documentation' refined and very authenticated.

  Enter the information useful/correct and close the debate.

  Concerning
  Girish Sharma

• Content question Pack Microsoft Active Directory

  So I installed the pack content for Microsoft Active Directory, and it works well for what it was designed for.

  Would it not possible to add another article for the surveillance of the integrity of the file? It is a requirement for PCI compliance and would be a great addition to this content back dashboard!

  Thought I would ask here before you request a feature, to see if it could possibly be just added to the fly ;-)

  OK, the content of Windows pack has been updated to include the auditing of objects! Please take a look and reply back with any feedback. If this answers your question could you please mark it as answered? Thanks for the comments!

• Cannot access creative cloud bookstores after switching to Microsoft Active Directory

  Recently IT Department flies over the entire company to Microsoft Active Directory computers. After the computers in the design team were made too, we could no longer access the library of creative cloud or download anything creative market.

  The Panel for the library displays a cloud with a x and this message: ' something went wrong initialization of the cloud creative libraries ' with a link to "More information" leading to this error page - Adobe - error page

  Very annoying. I really need access to libraries for my work.

  If anyone else has experienced this problem and has a solution for this? Is this a known issue? I searched and have not been able to find something that helped.

  Using windows 7

  Please check the steps mentioned in: need help with this message: 'something went wrong initialization library of creative cloud'

• Integration of EBS 11i with Microsoft Active Directory

  Hi all
  
  Please suggest how can I integrate EBS 11i with Microsoft Active Directory (LDAP), since we have regiterd SSO.
  
  Thank you.

  Please see these documents.

  Integration of Oracle E-Business Suite Release 11i with Oracle Internet Directory and Oracle Single Sign-On [261914.1 ID]
  Installation of Oracle Application Server 10 g with Oracle E-Business Suite Release 11i [ID 233436.1]
  Oracle Application Server with Oracle E-Business Suite Release 11i FAQ [ID 186981.1]
  Oracle Application Server 10g with Oracle E-Business Suite Release 11i troubleshooting [ID 295606.1]

  Thank you
  Hussein

• Authentication on Active Directory of Cisco IOS

  SCENARIO:

  2 cisco Secure ACS are configured to authenticate the connection of the user in Active Directory.

  RADIUS servers configured in IOS

  radius-server host 10.30.18.24

  radius-server host 10.30.18.25

  PROBLEM:

  When the primary server 10.30.18.24 Ganymede could not validate logon user, we have been disconnected from the router. Then I tried to change the order of the RADIUS servers in the router config that is

  radius-server host 10.30.18.25

  radius-server host 10.30.18.24

  and have gave us access. Can someone explain why 10.30.18.25 did not during the validation of the user in the first place?

  Concerning

  Simon

  Hi Simon,.

  Then the reason for this is, there are certain conditions that must be met before the unit tries to contact the second server in the config file.

  If you turn on,

  Debug aaa authentication

  you will get then 3 types of responses.

  -PASS

  -FAIL

  -ERROR

  Don't GO-> needs no explanation

  FAIL-> authentication server was available but the server has rejected the request of the user for some reason any.

  ERROR-> there is no response from the authentication server. No doubt its not accessible.

  ERROR is the only requirement when he will try to contact the following server defined in your configuration.

  So it's may be the likely reason why he never went pour.25.25 finished second et.24 was first, because que.24 was always accessible and returned FAIL for user authentication.

  Kind regards

  Prem

• ACS authentication with Active Directory based on ad groups

  Hello

  I'm trying to integrate Cisco ACS 5.4.0.46 with AD and I connected successfully GBA to AD and I used as a successful AD authentication for network devices but my problem now is that anyone with an AD account can connect to network devices that compromises security. I created a group in AD that I would use and I added the group under users and identity stores > external identity stores > Active Directory > groups directory. I also chose source of identity for Default Device Admin as AD1 and under the authorization, an authorization policy that uses a compound condition that uses AD1 and the custom group. However after you have set all that I am still able to connect to the switch with a user not in the custom group. Based on what I have explained to you can someone tell me if Miss me a step?

  Thank you

  Derek Velez

  Thanks for the update and the fence wire. Set default default rules to deny access when user legimitate if does not match a rule set by the administration of the CSA he should get denied access. In your case, it has been updated a permit so that both type of users access (members and non-members of ad groups).

  The best way to resolve these issues is to look at the monitoring and troubleshooting > attempt user > magnifying glass. You will see how this user has been allowed access.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Microsoft Active Directory Web Services - 2008 R2 edition

  Hello

  I'm updating the information for the employee on Active Directory (which is on the 2008 R2 version). My research on ADWS, I realized that there are some available in the version 2008 R2 of ADWS web services that are accessible to the public. But I have not any clear documentation confirm us. We try to access any account management Web service via http or soap

  NET. TCP: / /: 9389, ActiveDirectoryWebServices, Windows, AccountManagement

  via a browser after you connect to the host via the VPN network. But it does not work. What I feel is that this service must be hosted on a Web like IIS server for it to be accessible to the public via the Internet.  Like this instead of net.tcp

  http://: 9389, ActiveDirectoryWebServices, Windows, AccountManagement

  But the client side, host of this service indicates that it is hosted on IIS. Could someone please guide me if something is missing here?

  Thanks a bunch!

  SN06

  Hi SN06.
   
   
   
  The question you have posted is related to Windows Server 2008 R2, this is why I suggest you to contact the TechNet forums for help.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer
   
   
   
  It may be useful

• LobbyAdmin authentication via Active Directory

  Hi all

  I have a requirement to apply webauth on my network of comments and therefore need to configure the functionality of lobbyadmin. We will have several users login (Help Desk, receptionists, etc.) using an account of lobbyadmin and from a management point of view I prefer simply to drop existing users in a group active directory that grants them access to the rights of the lobbyadmin.

  I know the authentication can be done through RADIUS - but is it possible using AD?

  See you soon

  Rob

  No I don't think so.

  Since the lobbyAdmin are like the users who try to access the WLC through management. That's why somebody has to tell the WLC what privilege therefore have user account. Basically, LDAP can provide this info is why you ought to use the radius server if you want to use external users from an LDAP.

  But if what you want is to authenticate users AD in your authentication on the web, it can be done:

  http://www.Cisco.com/en/us/products/ps6366/products_configuration_example09186a0080a03e09.shtml

  Let me know if it answers the question.

• View the authentication information active directory with PowerCLI

  How can I get a list of all the hosts that don't use active directory for authentication local environment using powerCLI?

  Try like this

  Get-VMHost | Get-VMHostAuthentication |

  where {$_.} Area - eq $null} |

  Select @{N = "Name"; E={$_. VMHost.Name}}

• OBIEE 11.1.1.7.0 works is not after you have configured to use authentication MSAD (Active Directory)

  Hi all

  I'm trying to configure OBIEE 11 g to use the MSAD (Active Directory) authentication. I followed the instructions of Configuration Oracle BI with Oracle Internet Directory , but after a restart all services, I do not get connect OBIEE. I've hearded that there is a bug in this version (11.1.1.7.0) when you rearrange the suppliers and put the new (that you created) as the frist, followed by DefaultAuthenticator and DefaultIdentityAsserter providers.

  Someone had this problem? How to resolve that? Is there a URL or DocID teach how this is set correctly?

  Thanks in advance,

  Concerning

  is even if you have 10 k + users it will show only 1000, this is the limitation, but you can still find the users from the top by clicking on customize the table, it options you give the criteria in filter and view display, you can select the column by which you can search for example: by using the name or description, or Provider(AD or Default) in this path , you can search for specific users you want to see or Alvaro * so it will give u the list whose name start with Alvaro

  I hope it helps brand if not

• Authentication via Active Directory (11 GR 2) Oracle

  I want authenticate Oracle users through their Active Directory credentials. I followed the whole process step by step Oracle Support Communitycommunity "How to manually create an Oracle in Active Directory [820134.1 ID] context"

  OracleContext object appears in Active Directory users and computers.

  In addition, I recorded my database with domain name with the database Configuration Wizard.

  I gave any special permissions and privileges to the respective users.

  I created for Oracle users by IDENTIFIED worldwide as "cn = xx, xx = dc, dc = xx"

  When I try to log-in good sqlplus with newly created users I get the error of:

  ORA-28044: unsupported directory type

  I need to create Oracle Internet Directory, or of the foregoing is possible?

  So just use Active Directory directly without any OID/synchronization integration?

  Any ideas?

  The answer given by the Oracle Support:

  "You cannot use AD directly for authentication. You need an OID / OVD in the middle. AD cannot be used directly for Enterprise User Security. "
  

• Migrate existing Vcenter 4.0 authentication to Active directory

  Hi I am train to currently Active Directory, it doesn't use any ad for authentication are there any steps or procedures on how to perform these operations for non AD auth to AD auth login Vcentre 4.0 Vcentre?

  very simple. just join the vcenter server as a member server active directory.