Authorware 7 tutorial does not work

Similar Questions

• Recording.exe tutorial does not work

  I cannont perform the tutorial 'Recording' (Recording.exe) in the section "Getting Started" of Adobe Captivate. The other tutorials work when I click on 'Start '. The Recording.exe does nothing when I click on 'Start '.
  
  Is it possible to get another .exe or .swf file so I can take the tutorial?

  It appears a Flash 6 version (which is what I have on my laptop) is not 'enough' to run the .exe file. Copy the Recording.exe file to another laptop with Flash version 9 worked (thanks for the suggestion, Larry).

• ActionScript 3.0 Classroom in a Book code tutorial does not work

  The following code is from Actionscript 3.0 Classroom in a Book, Chapter 5.  It produces an empty flickering picture on the stage.  Can you see why?  The supposed error messages seem to pointing errors.

  

  Looks like you used a 1 where it is expected a lowercase L (as in the ldr - abbreviation of charger)

• Why my auto focus does not work like Julieann K does in his tutorial

  I tried to use the auto focus selection, as shown in the tutorial by julianne k and it does not work.

  After reading your response, I realized that my photo file was huge, so I reduced the entire file significantly down for something like 8 x 10 and it worked fine.  My account was just too big. I tired of small files, and the update worked.  the file may not just be very big. I thought that after you suggested I go to 8-bit. Thanks David

• Troubleshooting Guide: Audio does not work after a Certain period of time

  Hi all

  Thank you for choosing the HP Forums!

  If your sound recently stopped working on Windows 8.x or Windows Server 2012 and you suspect an update of Windows is involved, then look like! This is the troubleshooting guide that will explain how to solve the problem!

  Explanation:

  Currently, there is a Windows update that may cause the sound on your computer to stop working. The update is KB2962407, and it is now an "Important" update This means that it will be installed by Windows Update unless hide you it.

  This thread also covers generic sound troubleshooting which can solve the problems of "no sound".

  Before the update itself, since an update of Windows cannot be the culprit, there are a few troubleshooting can be done.

  A round of troubleshooting:

  1. run the Audio Troubleshooting in Windows 8 may solve the problem. It does not contain the possibility of eliminating any parameter that affects sound. Here are some steps on how to perform this troubleshooting:

  (a) hold down the key "Windows" and "R" and type "Troubleshooting" and then press ENTER.

  (b) a window will open. On the left, click on "Show all", then "Audio playback".

  (c) click on 'Advanced' and run it as an administrator. Then click on 'Next' to complete the process.

  2 try to create a new user account. The changes forced by the update that is likely to affect only a single user. This HP document shows you how to create a new user in the section "creating a new account in Windows 8": users and connections (Windows 8) account management

  3. try a pair of headphones or external speakers. This is set by the whole issue if the sound does not work via an output of second or third device.

  4. an alternative is to uninstall the driver manually and then force to be installed again:

  (a) open the Device Manager and go to the section "audio, video controller and game."

  (b) make a right click on your audio driver and select "Uninstall".

  (c) restart the computer. This will force the material to write a new driver at startup.

  5. Finally, to ensure that the remaining steps that you have not tried this document are tempted: no sound from speakers (Windows 8)

  New inclusions:

  Deactivating and activating the audio driver has been tested with success results enough for me to post here. Here are the instructions to do this:

  (a) open the Device Manager and go to the section "audio, video controller and game."

  (b) make a right click on your audio driver and select "disable."

  (c) wait a minute, then right-click on it and select 'enable '.

  Also, the restoration of the system is also a valid troubleshooting step. This will return the computer to a point before the update or an external source of the issue has occurred. Here is a document on how to perform a system restore: System Restore

  If you want something strong, an update of Windows completely refreshes Windows 8, without affecting the files: refresh your PC to solve problems (Windows 8)

  Also, this is a sound of Windows troubleshooting tutorial. Just out of curiosity, I've recreated the problem on a Windows 8 and went through this tutorial. He has been able to solve the problem: no sound in Windows

  *Everything in italics is currently untested, but will be tested as soon as possible. I believe that these steps will help:

  In the search bar, type "services.msc" and press ENTER.

  Hold down the 'Windows' and 'R '. Type "services.msc" and press ENTER. Look for the following services:

  -Audio service

  -Windows audio

  -Windows Audio endpoint Builder

  I want you right click on each of these services and select "Stop". When they all stopped, right-click on each other again and select 'start '. So, make sure that the status of each service is "started" and their startup type is "Automatic".

  Troubleshooting of the update:

  At this point, unless you want to reinstall the operating system, the only other option is to tackle the update, KB2962407. Please note that the following troubleshooting is ONLY a workaround, for now and should be done only if the computer has installed this update.

  First of all, you can try the hotfix package content in this document from Microsoft, specifically at the KB2962407 address: RT of Windows, Windows 8 and Windows Server 2012 cumulative hotfix: June 2014

  If that doesn't help, then uninstall the update of Windows and then hide it, are the only way to eliminate the question if she caused by this update. Here is the procedure to uninstall the update:

  1. go in Control Panel, then click on "programs and features".

  2. click on "view installed updates". Look for the update with ID KB2962407.

  3. right click on the update and select "Uninstall". Restart the computer.

  Then, here is the procedure in order to hide the update:

  1. go in Control Panel, then click on "Windows Updates".

  2. click on ' Check for Updates '. When the process is complete, is expected to find important updates available. By clicking on the message will open a window where is the important updates.

  3. right click on the KB2962407 update and select "Hide update". This will prevent the installation update next time that Windows updates are installed.

  Conclusion:

  At the end of this guide, you will have the sound works again (assuming that the cause was the update of Windows, or the less focused on the software). Please let me know if you have any questions or concerns. Thank you!

  Mario

  I worked on behalf of HP.

  @Charlton26 ,

  As @vhawk1 recommended, please give my long post suddenly. You should have a positive resolution when you are finished. These steps are tested and solve the problem

  And @vhawk1 , thanks for getting the word

  Mario

• Canvio connect II does not work on Mac

  I have a canvio connect II and I had to format it because Windows 7 does not recognize, I did said Toshiba, for formatting so that the hard disk has unit. I formatted with NTFS and my problem is when I connect my Mac hard drive, I can't save anything, I can't make a backup... Then my canvio connect II does not work in my Mac.
  How can I put all the software that had my hard drive? Where can I download them? How to install?

  Thank you!
  Alberto.

  I saw in the toshiba tutorial this hard drive driver "Tuxera NTFS for Mac" it allows to read and write data in Mac and Windows, how can I get this driver?

• My password does not work and the computer won't let me? What caused this and how to fix it?

  Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?

  Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?

  If you have a Vista DVD, please use this tutorial from Microsoft Support:
  http://support.Microsoft.com/kb/940765/en-us

  Here's another same tutorial, but from another source;
  How to regain access to your administrator account tutorial link For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Media Player in Vista does not work. Installation of Windows 7 Home Premium will fix the problem?

  Windows Media Player does not work.  Impossible to use slide show programs, can not open attachments that require Media Player.  Tried to update and couldn't.  Couldn't fix it.

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Control Panel does not work correctly.

  original title: salvation

  Hello

  My Control Panel in windows vista 64 bit does not work correctly, when I want to use functions such as catering or to uninstall a program or changing the State of account it just an error message like missing a file on each of them has its own error message, is it possible that I can restore the control panel to its previous state I tried windows restore, but it doesn't work.

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• HP Laser Jet 1020 does not work. Order random print.

  Original title: printer does not work

  My hp laser jet 1020 printer has stopped printing of pages recently.  Worked well for a long time but print only a few sites will... Thanks for your help...

  You can ask the question in the following forums:

  Printers and all-in-one
  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet
   
  Windows Vista IT Prop - Windows Vista printing forum

  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/threads

  Tutorials on the problem of printers:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows
  Technical problems of Vista and troubleshooting - printing
  http://support.Microsoft.com/ph/11732#tab11

   

   

• my clock in the sidebar does not work!

  my clock in the sidebar does not work recently. It turns into a black circle
  and nothing does not appear when I put it in my sidebar.

  In addition, other tools which is normally integrated (weather station, notes, calendar...)
  just show white boxex when I put them in the sidebar.

  What is wrong with him? How can I solve this problem?

  Try this tutorial:
  http://www.Vistax64.com/tutorials/161046-Windows-Sidebar-gadget-not-displayed-correctly.html
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Opening of session in normal mode does not work, but will be safely mode__

  I can log into safe mode, but when I try to log in normal mode I get a message that says that the connection has failed and my stuff cannot be loaded correctly. I'm sure it's a software problem, but I don't know how to correct it. I'm working on a Windows vista computer.

  What is your problem error message?

  We need EXACT messages here.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Launch Startup Repair does not work

  Hi, the 'Launch Startup Repair' option does nothing for my installation of Windows 7 64-bit edition.  If I select the screen simply refreshes and presents me with the same two options - Launch Startup Repair and start Windows normally.  It's as if something prevents me to attempt any repair solution.  Anyway, which would cause Launch Startup Repair does not have to work.  Thanks if someone can advise.

  Hi, the 'Launch Startup Repair' option does nothing for my installation of Windows 7 64-bit edition.  If I select the screen simply refreshes and presents me with the same two options - Launch Startup Repair and start Windows normally.  It's as if something prevents me to attempt any repair solution.  Anyway, which would cause the launch startup repair does not work.  Thanks if someone can advise.

  Hello

  It may be damaged.

  If you have problems with the use of the built-in repair software:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• BlackBerry phone Q10 (q10) does not work after a reset of the safety

  I did a wipe of security that yesterday since I can't make or receive calls, sms messages or anything of the these, cant access my list of contacts, camera or photos. I can't put even in air time so basically its just do nothing. Calls are on the list of calls from well miss that when I click on call, nothing happens and my screen does not show anything when the call is incoming that it sounds yet. I tried a full reboot, registering the phone and nothing works, when I click on an icon, nothing happens even on the tutorial icon and it also crashes network settings

  Try this... let the Q10 power, remove the battery AND the SIM card and the card holders (if present).

  Let the SIM card, insert the battery to reboot and see what all works or does not work.

  You are connected to a WiFi router?  Can you connect to one?

• Logitech headset plugged in, but does not work.

  I have a logitech USB headset H540.  When I plug it into my pc I hear no sound either, I tried to reinstall each sound driver, but it does not always work.  When I go to properties or to solve problems, it keeps saying my devices are turned off, but I've never disabled them and I can't turn it back on?  What is going on?  When I try to test them too and go to levels, nothing appears!  IM really confused because some time ago my other headset was working but now I can't hear anything when I plug in a usb headset.

  Hello Matheau,

  Thank you for the update on the question and sorry for a delayed response.

  Try it mentioned below for the methods to solve the problem and see if it helps you to solve the problem.

  Method 1

  Try to check that the service responsible for tone is running or not. You can try the steps below to start the service.

  1. Press the button window + R to open the Run dialog box.
  2. In the run box, type services.msc.
  3. Now, locate the Windows audio service in the list.
  4. Check if it is started, if not, right click on the service and click Start.
  5. Close the services window, and then restart your computer.
  6. After restarting your computer and then check the status of the sound.

  Method 2

  If the problem persists, you can try to update the audio drivers and check the status.

  Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install. Windows warns you if it detects a suspicious or dangerous driver, you should not install.

  You can check the link below to update the drivers and check the status.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows/update-drivers-recommended-links#update-drivers-recommended-links=Windows-7

  Method 3

  If the problem persists you can view the tutorial below which can help you identify and fix common sound problems in Windows, including no sound from your speakers or headphones. This tutorial does not cover sound problems related to specific programs. Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  No sound in Windows

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards