Logitech headset plugged in, but does not work.

Similar Questions

• Blue Tooth headset is paired, but does not work

  I have the Miikey helmet pace wireless and HP Windows 7 laptop that has Blue Tooth built in.  When I pair the headset, blue tooth sees and pairs, but there is an error.  When I use the function of trouble shoot it says I need to install a driver for the headset.  I don't remember having to do this before (Windows XP with an external blue tooth and the dongle).  I tried to contact the headset stand and unresponsive.  I googled drivers for the headset and can't find them on the site of headphones or anywhere else.  Specifications of the helmet to say it supports Bluetooth 2.0 and higher.  Blue tooth I have is 4.0.

  Any suggestions?

  Thank you

  RK

  Just because it is up to date does not mean that it is not corrupt.  Re-install.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• I use CS4. Can I open files CS6? I get 'not available on your system plug-ins' messages and I would like to open anyway, but does not work by clicking OK.

  I use CS4. Can I open files CS6? I get 'not available on your system plug-ins' messages and I would like to open anyway, but does not work by clicking OK.

  InDesign CS4 can open the .indd files, .indt and .inx from earlier versions, but not from later. It should, however, be able to open files saved or exported to more recent versions, .idml being understood than non support for features will be lost, text will likely reflow due to differences in the engines of texts between versions and more the gap between versions more likely, there must be significant differences from the original. You need to be sure that CS4 is at version 7.0.6 read the .idml.

• When I try to buy a book, it seems it download but does not work. If I am able to get a sample and try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

  When I try to buy a book, it seems it download but does not work. If I am able to get a sample & try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

  Mine just did the same thing. I've even went and was sold again in case I did something wrong the first time. Still no book! I had to happen a few weeks ago, but when I closed iBooks and reopened, the book was there. This time that didn't happen.  I prefer to read on the iBook, but I'm not if my books download

• Update KB937287 keep apearing as the only updated, try install many times, but does not work, tried it with the standalone version and it keeps apearing

  Update KB937287 keep apearing that the only update, tried to install a lot of times, but does not work, tried it with the standalone version and it keeps apearing, when I install it does not display an error message, just say that again was successful but when I try to look for more updated it apears again.

  Hi mayortom,

  Thank you for visiting the Microsoft answers Forum.

  You can follow the steps outlined in the article below:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339/

  I hope that helps!

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• Tax Turbo installed but does not work on Windows Vista

  Tax Turbo installed but does not work. He says"this file does not have a program associated with it for performing this action. I don't know what the problem is. Exchanged the software still does not work.

  Sometimes, says "Application not found" program seemed to install and icon is on the screen, just at the moment where I got to run the program, it does not work and says it's "shutting down".  Any help?

  Have you ever successfully run this program on your machine?  So the system restore helps you, if if he was running very recently.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Which edition we talk to TurbTax, anything earlier than 2006 may not be not fully compatible with Vista?  64-bit versions may not be compatible at all?

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?

  The program will run in Mode safe?

  Vista advanced boot options
  http://Techblissonline.com/Vista-advanced-boot-options/

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Problems with the launch of other programs via shortcuts on your desktop?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

• Adobe Flash is installed but does not work.

  Shows that Adobe Flash is installed but does not work.  whenever I try to watch a video, it says I need to install adobe flash

  original title: adobe flash

  Why do you send the original to a download of the Adobe Reader software, poster when their question Abobe Flash Player?

  The current version of Adobe Flash Player is 11.2.202.235

  http://get.Adobe.com/flashplayer/

• Cannot install itunes. It installs but when I clicked on it said has not been installed correctly. I uninstalled, reinstalled several times but does not work.

  Cannot install itunes. It installs but when I clicked on it said has not been installed correctly. I uninstalled, reinstalled several times but does not work.

  Trying to download iTunes again, but instead run the installer from its current location, try saving it to your hard drive and then run the configuration file.

  Problem installing iTunes or QuickTime for Windows
  http://support.Apple.com/kb/ht1926

  iTunes for Windows Vista or Windows 7: troubleshooting...
  http://support.Apple.com/kb/ts1717

  You can try both uninstalling and reinstalling as a new user to see if that helps:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If this isn't the case, I recommend you contact Apple for assistance.

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

• JavaScript works with an alert, but does not work without it. Why?

  This happened to me before, but I was able to solve my problem. Now I'm not.

  Let me explain: I have a javascript function which I call when I double click on a line on a table:

  [code]

  	function CallServ (evt) {}
  	source var = evt.getSource ();

  	AdfCustomEvent.queue (source, "call",
  	{
  	},

  (false);

  	auxDblClick.call (this, source);
  	}

  	function auxDblClick (CBC) {}
  	split var = src.toString () .split ('=');
  	var idButton = split [1];
  	var split2 = idButton.split(':');
  	okButton = split2 var [0].concat(':');
  	for (var i = 1; i & lt; (split2.length - 1); i ++) {}
  	okButton = okButton.concat (split2 [i], ' :');)
  	}
  	okButton = okButton.concat ('dc_cb1');
  	var comp = AdfPage.PAGE.findComponent (okButton);
  	Alert (COMP);
  	AdfActionEvent.queue (comp, comp.getPartialSubmit ());
  	} [/ code]

  As you can see, my alert line is commented. If it is not commented, the "auxDblClick" feature works very well: it will print the model on the alert, and then it will perform the action of the dc_cb1 button. However, when I commented the alert function, it stops working.

  I have PartialTrigger set to "true" on my dc_cb1 button and the clientComponent is set to 'true '. I've also set to true ClientComponent on the table, but it does not work.

  So, why the function working with alert, but does not work with the alert off the coast? What Miss me?

  
  P.S: jdev version 11.1.2.4.0

  I found the solution:

  Before the "AdfActionEvent.queue (comp, comp.getPartialSubmit ());" line, I used the update function. Like this:

  	var t = document.getElementById (okButton);
  	t.Focus ();

  Now everything works fine

• I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.

  I created a Javascript script that adds a watermark on the document action "paper print".  This works in Acrobat Pro, but does not work in the drive.  I am a novice using Javascript, so what am I doing wrong?

  Cannot use either addWatermarkFromFile or addWatermarkFromText methods of document with player as shown in the documentation. You can hide/display the form fields and the existing layers, so consider this approach.

• I installed the German version of Photoshop, now I need the version in English for some actions, that I bought. In Photoshop preferences is German and I can't change to English. I changed my Creativ cloud in English, but does not work for Photoshop. I do

  I installed the German version of Photoshop, now I need the version in English for some actions, that I bought. In Photoshop preferences is German and I can't change to English. I changed my Creativ cloud in English, but does not work for Photoshop. What do I need to reinstall Photoshop in English?

  Also if you wish, you can take back to the top of Presets, plugins... before uninstalling.

• Filters Photoshop CS6 Gallery is visible (not grayed out) but does not work.

  Filters Photoshop CS6 is visible (not grayed out) but does not work.

  I opened in 8-bit RGB jpeg.

  I can use the options of fluidity and blur, but nothing in the Gallery of filters (for example cutting).

  I am running on a MBPro CS6, recently restarted, 16 G of RAM, OSX 10.11.1

  I get no effect for smart objects or rasterized jpegs.

  You will notice the cut filter is selected, but has no effect on the picture.  There is no error message.

  It looks like I could use the filters a month ago.

  Thank you.

  Jeff

  

  The preview is enabled.

  Click just to the left of the opening.

  

• My Logitech extreme 3D pro joystick does not work with the dogfight when played on vista Simulator.

  Why can I not get my joystick works when you play the air combat Simulator?  I'm under the it on my laptop with vista.  The game installs fine, but I don't get a response when I use the joystick which is a Logitech extreme 3D pro.  I go into the settings to calibrate it and it shows that it is there and it tests fine but it still fails.  I thought it was just the joystick, but it works with the microsoft x Flight Simulator.  Then I tried to install the joystick Saitek initially, I used to play the game with and got the same answer, it would not work and settings would recognize the control stick and he would test well but still does not work.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  It seems that the joystick drivers are not updated for windows Vista.

  Try to access the link below and install the gamepad for vista drivers and install the same as an administrator.

  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, en? DiSo = 13

  If this does not work, try to contact Logitech and check if they have updates on this for Vista.

  Follow the link below for more information.

  Combat Flight Simulator 3: how to troubleshoot joystick

  http://support.Microsoft.com/kb/811463

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• I'm a fool - recovery mode. Tried the sansa.fmt folder, but does not work... Help, please!

  My buddy gave me his sansa used for a Christmas gift.  I loved.  They when I delete his old songs that I deleted the other folders on it as well (pictures, records, etc.)  basically everything except the music files.  Now, when I turn it on, it says "cannot load the main image.  switch to recovery mode.  I browsed the forums and tried to make the sansa.fmt folder (it formatted) but still does not work.  I can't find the stuff I deleted from the Recycle Bin.

  Thank you in advance and happy holidays.

  It's Christmas time.  Santa has something cool in his bag, I'm sure.  We will first check the device to version 1.

  When he started upward, you saw just the SanDisk logo with sunburst on the splash screen?  I just want to be sure that your e200 is not a Rhapsody Sansa, because this version has different firmware.  R has a Rhapsody splash screen after the initial one.

  You've seen how to connect in Recovery Mode, Yes?  Start with the e200 decommissioned.  Slide the HOLD switch to the right (orange showing) and hold the button depressed all REC by plugging into the USB port.  It is the easiest method of recovery mode.

  Alternatively, you can start the Recovery Mode if the REC button is held, and the power-menu button is tapped too. In both cases, welcome to the Recovery Mode is displayed.  Either incidentally, the MSD acronym on the screen refers to the "Mass Storage Device", as in MSC mode.

  A few words of caution before going any further.  Recovery mode opens the reserved partitionof the device.  Critical data are stored here.  Do NOT use the Windows format command when this partition is opened, or you will erase these critical data! Only use the sansa.fmt folder trick to tell the e200 himself format automatically.

  Download and Unzip the TWO files of firmware for your Sansa e200v1 here.  It is the 01.02.24, the final version.  Just click on the version you want for your region.  The Sansa Updater link isn't what you need.

  The two files, after him have unzipped, are pp5022.mi4 and BL_SD... ROM (mental block on the name at the moment).

  When you connect the e200 and open a window of Windows Explorer (my computer / computer), you will see a new icon, 16 MB FORMAT.  Double-click this to open reserved partition.  Do not touch the file version.txt in there and don't TRY to use the Windows Format command that appears with a right-click, bad juju.

  Let's go Happy window. Drag the first window to a convenient size, and the other with your firmware files can be placed on the desktop.  Now for the magic!  Simply drag and drop these two firmware files on in the open window that represents the reserved partition.  Cool huh?  Easier to make the ratio of rum and eggnog just right.

  Now, if there are a bunch of gibberish stored on the device, and you want to start with a clean slate, you can tell the e200 to format the primary partition (where music, videos and photos are) automatically.  Click right while in the 16MB FORMAT box and select new folder.  RENAME it sansa.fmtfolder and the Sansa will follow this command after installing the firmware.

  Go to the task bar at the bottom of the screen and click the command remove device or eject the disc.  Again, WIndows like formatting of devices, it of eject you want, do not fit!

  Unplug, and restore your e200!  Slide the HOLD switch to the left.

  Let me know how it goes, since the Bobster has other tricks in the bag.  This one should do the trick.

  Oh, I forgot.  You're not a fool.

  Bob