Stop button is not active

Similar Questions

• the stop button does not respond when I needed to stop a program

  I want my labview program to stop when I press the stop button, but this isn't the case... stop button does not work... I have used a loop in which there is event structure n structures case... I have attached my file... so please help me...

  Hello

  In your code, this can be done by using the new event on "Stop" button when press it it will give a true

  Like this

  

• Why the STOP button does not stop this vi?

  Hello

  I took an example of Labview 2011 called "soul hollow period-Low Freq 1 Ctr.vi. This example vi measures one period, but, I want to measure the period over and over again, so I put it in a WHILE loop, but the STOP button does not stop at the vi.  Instead, I have to use ABORT to stop the vi...

  How can I stop this vi?

  Dave

  It does not replace the time-out.  The while loop is a separate beast from the meter reading.  You wouldn't want your loop due to always make you miss the error messages, would you?

  Usually just clear the error message of time-out on the counters.

  You get the message twice because the loop runs in fact twice.  The first time the stop button is read as false as soon as the loop begins.  Then you click on it.  At the same time that it takes 10 seconds for the timeout counter to occur - when he does it gives you the error.  Then, the loop runs again.  This time it reads the key stop as true, because you clicked on it during the timeout of 10 seconds of the last loop.

  A time loop allows everything inside to complete execution before the end, then you will have to wait for an another timeout of 10 seconds to occur which produces another error.

  Unless you need a measure of very, very low frequencies I set your time-out to a more reasonable number and simply erase the mistake if it matches 200474.

• Stop button does not reset after each program start

  Newbie here, so when I start the program with the arrow of departure or, my Start button is always in the right position, but the stop button is not. How do reset you the default user as the stop button control.

  Lol it doesn't have the same effect.  They are completely different actions.  If they were the same, then NEITHER would never have created the other.  I've never seen a practical use for 'Up to this that freed'.  Read the help files on the mechanical actions to see the difference.  There is a real difference, delicate and subtle.  But there is a difference.

  If you clean the Boolean logic and put the start in case structure button.  It works very well.  See attachment.

• plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  You can start in safe mode and restore the system.

• Command button is not activated after action is completed

  Hi all
  
  I am creating an Excel since the command button using a method of bean support. The command button is not activated after that action is completed. but the information load in Excel and excel also created correctly.
  
  Code method as follows:
  
  
  public void exportToExcelEventForm () throws IOException
  {
  
  
  Date dt = new Date();
  SimpleDateFormat fmt = new SimpleDateFormat("yyyy-MM-dd_HHmmss");
  String filename = fmt.format (dt) + ".csv".
  String contentType = "application / vnd.ms - excel";
  
  FacesContext fc = FacesContext.getCurrentInstance ();
  HttpServletResponse response =
  (HttpServletResponse) fc.getExternalContext () m:System.NET.FtpWebRequest.GetResponse ();
  response.setHeader ("Content-disposition",
  "attachment; filename ="+ filename);
  response.setContentType (contentType);
  PrintWriter out = response.getWriter ();
  out.println ();
  out.println ("event details");
  out.println ("testing");
  out. Close();
  fc.responseComplete ();
  FC. Release();
  
  }
  
  What is at stake in this? pls guide me

  Why not put an af:fileDownloadActionListener in the command button. In the bean you need a method like

      public void exportExcel(FacesContext aFacesContext, OutputStream aOutputStream)
      {...
  }
  

  You can use the stream output and when you finished just rinse. Do not close the stream and does not complete the answer.

  Timo

• The Stop button does not appear except when I am customization settings

  I just upgraded to FF 3.6 to 8 FF. The button Stop (X) does not appear between the buttons reload and home.

  However, if I click with the right button on the menu bar and select Customize..., the X appears as it should be, then disappears again when I close customize it... box.

  Thanks for your help. This may be related to another error that I get:

  TypeError opening FF 8

  Firefox 4 and newer versions, go, Stop and reload buttons are combined into a single button at the right end of the toolbar URL or address. The button changes depending on the type of activity:

  • green arrow GB when you type in the address bar
  • Red Stop ("X") button while the page is loading
  • Reload (circular arrow) to gray when the page is finished loading.

  Separate buttons are possible (nadia: carefully read the step 3 "ball" below):

  1. Open the Customize the toolbar by clicking the Firefox button > Option > toolbars OR by clicking View > toolbars > customize if using the menu OR bar right click in an empty space on a toolbar and select Customize
  2. While customizing the window is open, Stop and reload buttons will show separate from the address bar and the search bar
  3. While customizing the window is open, drag the buttons anywhere on the Navigation toolbar
     • order Reload-Stop will bring together into a single button
     • order Stop-Reload will remain in separate keys
     • or drag a "separator" in the window customize between Reload-Stop and that they remain separated
  4. Click done at the bottom right of the window customize to finish

  See: https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Why push button and stop button does not work in the structure of the casing and buckle my VI? (code attached)

  I am a beginner. I'm trying to create a simple VI only switches beetween two types of signals like sine and triangle when someone press on the push button and at the same time, save the data in the file to my desktop. I also have a stop button which no longer record data.  Here are my questions and dproblems:

  1. when I press the button, it does not the true and false in the structure of the case so that I can see the triangle wave stops and begins the sine waveform table.

  2 when I press the stop button, I want the program still running, but the process of writing data in time the loop stops. I don't mind if the graph of the wave stops too but it would be better for the user to see the wave form is running, but the data will stop recording.

  3. Although the condition of the loop did not accept the local variable for the stop button inside the loop or within the structure of the case, so I put the button outside all the loops and the structure.  (I know that this is a problem, I do not know how to use a single button several times in a single code. The local variable did not work the world premiere? I have to?)

  4. the data file it creates hase a lot of lines and columns. I expect a time column and a column of mixed signals based on the push button amplititude this user press every time.  I did that with the acquisition of data and a sensor, it automatically gives me the voltage and time in a column. I tried 2D and 1 d and it has not changed anything.

  Thank you for your help

  

  

  Like you said, you read only your entries at the beginning, then whatever value they had before you hit run is worth to be seen by the rest of the code. Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.

  

  Simple code goes like this:

  • Containing the main code of while loop
    • Inside of the whole loop is all user interaction code or modify the code entry
    • Stop the terminal loop is attached to stop certain criteria or user selection of a stop button
  • Loop initialization above all if necessary
  • Closing referrals and communications, etc after all loop

  It's very simple code. If you want to watch in more advanced architectures that are scalable, Google "LabVIEW State Machine" or "LabVIEW producer consumer."

  If you are just starting, you should do a free training have the capabilities of LabVIEW.

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Stop button does not work.

  Hello. How to stop the vi by using the button on the front? I tried to use stop button inside while loop but when vi is running, and if I press the button on the front of the vi will not stop. I have to stop manually. My vi have two structures of the event. I even tried to leave buton. The button remains pressed, but vi is stopDoes the program wait until both executed for the button stop working.

  I have attatched different variation of vi.

  Thank you.

  You need only a structure of the event in your program.  Add an event to it press the button exit and stop your loop with the same.

  Delete the sequence structure.  It is not necessary.

  Move your init function VISA outside the while loop because you only need to do once.

  Move the VISA close outside the while loop.  You only need to do once.

  NEVER use the Labview output function.

• HP PhotoSmart C310a market and stop button does not work.

  Disconnect the power and rear connection does not work.  Printing is sitting at the initialization and the button does not illuminate.

  Hey jacobyaz,

  If the printer does not respond when you press the power button, you can try the steps in this video here:

• SQLDeveloper 3.2.20.09. Package body button is not active.

  SQLDeveloper version: 3.2.20.09
  OS: Ubuntu 12.04 LTS
  JDK: jdk1.6.0_35 (Oracle)
  -----
  
  To be short and precise, there is a bug introduced with the latest version of SQLDeveloper: the 'open body' button in the edition of spreadsheet package specification is inactive (grayed out) when the package was opened for the first time (http://imm.io/KxbO) and is normal when open for the second time and so on (http://imm.io/KxcE).
  
  Steps to reproduce the bug:
  1. (re) connect to DB
  2. open "Packages" in the object tree
  3. double-click on any package that has a package body - it's open package specifications
  4 see the button 'Open body' inactive
  5. close the package card
  6. Repeat step 3.
  7 see the button 'Open body' active
  
  Anyone have the same problem? Is this a bug? No work around to eliminate it?
  
  -----
  
  PS output Terminal is completely empty:
  
  Arino@Firestarter:~$ sqldeveloper
  
  Oracle SQL Developer
  Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved.
  
  TimesTen registered

  Hello

  There is no alternative workaround. No bug will be connected - the 3.3 line code already has the correct behavior.

  Sorry for the inconvenience.

  Kind regards
  Gary
  SQL development team

• Writeback: the button getting not activated

  Experts,
  
  I tried to implement the option of writeback in OBIEE.
  
  The problem that face, is that at the end of the report button is not enabled for me.
  I belong to the Group Admin too.
  
  Can you please help.

  Hello
  Check your .xml configuration in : \OracleBI\web\msgdb\customMessages
  and
  check this tag, config this tag correctly and restart your services after config correctly

  above tag is an example
  and yet a reference site
  http://blogs.SiliconIndia.com/praveenOBIEE/OBIEE_writeback_update_Button_Grayed_Out-bid-53feM7pE1568245.html

  Edited by: user13013590 may 4, 2010 19:12

• Stop button does not reset LabView?

  Hello

  I did this VI (attached to this message), but whenever I have to use "continuous run", it seems that this gives the wrong result in the façade. However, it gives correct results when I add a random check on the block diagram and delete it immediately (technically speaking, nothing has changed at the blockdiagram) and after that, press 'run continuously.

  If the button "Cancel execution", which I use to stop the system does not reset my system? How to reset the system until I use it?

  In addition, below I watch 4 similar parts, if I use 25 of these parts in the same file, does it take much calculation effort or is it no big deal for LabView (on a basic computer?)

  

  Thanks in advance!

  Just do a simple state machine

• Assist stop button does not display of rescue if the ufd is connected

  New VAIO (8 64-bit Windows) allowed the creation of the recovery USB but check by booting from the flash drive proved to be impossible. Instructions say insert a flash drive, shut down the computer, press the assist button, see rescue screen. Rescue screen does not appear; VAIO flashes slowly and turns on the ufd, but nothing more. Note that media rescue is 32 GB fd "recognized" and and "verified" creation no help available?

  
  

• The "get Messages" button is not active or does not

  I installed Thunderbird two days ago and use a global mailbox. The button "Get the message" gets it no emails. However, if I press each mailadress individually, I receive emails correctly. Hope someone knows how to solve this problem.

  "Get Messages" will work for the selected e-mail account.
  In the menu "Get the Message" drop-down selection "Get all new Messages" will work on all accounts e-mail automatically.

  For a Global Inbox type of account:
  If you check 'Include this server when getting new messages', you need to download mail when you click on the button "Get Messages"... see info below on the control that this field is selected.

  In tools > account settings > server for the e-mail account settings
  or
  menu icon > Options > account settings > server for the e-mail account settings

  Click on the button "Advanced".
  You should have this selected:
  Inbox for the account of different ' global Inbox (local files)
  Select 'Include this server when getting new messages'
  Click OK
  Click OK to save the changes to account settings.