Auto generation of password
After an update of windows, does not have to restart my Pc and it was necessary to retart it in a safe mode and system restore.
After that I left the Pc on, after some time when I checked my Pc I found it out (probably off Auto) and when I tried to turn on I had a nasty surprise. A password? How is that possible? And how do I proceed? I need my pc and I hope that I don't need to format
Thanks for the help
Caty
This situation is often caused by a malware infection, and after you come back it would be wise to run.
http://www.elephantboycomputers.com/page2.html#Removing_Malware
Have you tried leaving the empty password? If Yes, and that you had no chance to follow the instructions below.
You can change your password to something you remember (or use a white) another administrative user account. If you had only an administrative user account, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.
All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.
If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:
NET user administrator / Active: Yes [press Enter]
NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]
[Note: do not enter the brackets!]
Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.
If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.
Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:
Start Orb > Search box > type: cmd
When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:
NET user administrator / active: No. [Enter]
Exit the command prompt.
General recommendations for creating users in Vista:
You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.
In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.
The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:
Start Orb > Search box > type: netplwiz [Enter]
Click continue (or provide an administrator password) when you are prompted by UAC
Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
MS - MVP - Elephant Boy computers - don't panic!
Tags: Windows
Similar Questions
-
IOM - Auto generation of password
I have a java program (.java) that can produce an automatic password generation. Now, I want to implement IOM automatic password generation so that when accounts are created in the IOM by admin console/reconciliation, it should be automatically generated password for accounts and an e-mail should be sent to the user with the automatically generated password.
Could someone please throw somelight on it. Please specify the procedure slightly.
Thanks to you all.First make the jar in your .java file and put it in your java task and restart the server.
Go to the map in the Console Design
Give the name (Nothing)Select the entity type
Give (something) description
Save
Add variables if you want to (depends on your java code)
Add a task it
Select java task, then click on continue
Give the task name, then select your wire ein pot down to the bottom of the POTSelect and save
You will see changes to the below (according to your java code)
Map the attributes (output and input)Compile the adapter
If it is OK then
Go to console design
Manager of data objects
Search for users
Click on assign, then select your adapter y
Map attributes and saveCheck this box just to get an idea of the adapter of the entity
https://metalink2.Oracle.com/MetaLink/PLSQL/f?p=130:14:3743417295511830640:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 749669.1, 1, 1, 1, helvetica -
4th generation without password
I want to buy an Apple iPod touch 4th generation opportunity.
The owner said that they don't remember password. Can I change the
password somehow if I made this purchase?
Yes. Connect the iPod touch to a computer and open iTunes. Click on your device and under 'Summary', click on «Restore iPod touch...» ». This will erase all data on the iPod and when it's over the iPod displays the splash screen, as if it is new.
-
All,
I must be missing something, I 'Activate password generation' turned on for the installation of PE separate (2), but every time I create an account password field is always empty. I see this in two installs completely different.
Thank you
Justin Ferello
Technical Support Specialist
KBZ, a Cisco authorized dealer
http://www.KBZ.com
e/v: [email protected] / * /You write "create an account". I expect similar to the legacy behavior
Configuration of the TMS Agent, where the passwords are only self created on an AD import.
Generation of manual account = installation manual password.
I would try to get them to use AD to import accounts and also handling via AD & VCS password.
-
How to stop IOM generation automatic password during the reconciliation of trust?
Hello.
I'm under trust reconciliation against source DB with IOM 11 GR 2 PS3. I want to generate a password for each new user, based on the algorithm required by the customer.
I created the event handler PostProcess on CREATE and EDIT with the following code:
UserManager usrMgr = Platform.getService (UserManager.class);
String newPassword = generatePassword (params); generates a complex password that is good enough for the password by default IOM strategy
usrMgr.changePassword (UserLogin, newPassword.toCharArray (), true, false);
Plugin returns no error, however, ultimately what IOM creates a new user with a random password (e.g. blablaqwwdfe11234) which is not equal to newPassword specified by me.
I want the users to be created with the password I specified, not the random passwords! How turn off this generation of random password or at least to ensure that my plugin is triggered WHEN the random password has been set, so I can rewrite the password necessary to value?
What is the order of the event handler, you provide?
Make sure that the order is more than 2500.
~ J
-
Auto generation of students ID
Hi all
I have the table that contains the following fields: -.
student_id
student_name
student_fname
student_address
entry_date
I want that when I click on the button save it records the folder and generations auto ID. the student now I have the student ID giving m manually, I entered 15 files, now I need that when I save record following its automatically creates the student card which will be 16.
Concerning
SidibéHi Saqib,
This is not a logic of Noor who you try to apply... I mean, suppose that I entered 1.6 student with id std
then I entered 7 but I have not entered the student id or forgot. Then I went for the new record 9 then cont
up to 14 and the other more record with blank student card. Now, I press save. Now it has happened. System will insert
15 for the u number missed between 7 and 9 and 16 for the last of them. If you want to keep as it is. then...On each entry, you will need to keep the number somewhere in the GLOBAL variable. Suppose that, when you enter
ID STD 14 save value in GLOBAL VARIABLE 14 now that you've entered the record of 15 with student empty.Then insert in pre - query should look like this
IF: std_id IS NULL THEN
IF: OVERALL. VARIABLE > 0 THEN
SELECT: OVERALL. VARIABLE + 1
IN: STD_ID
FROM DUAL;
ON THE OTHER
SELECT NVL (MAX (STD_ID), 0) + 1
IN: STD_ID
OF STD_TABLE;
END IF;
END IF;-Clément
-
iPod Touch (5th generation) need password after reset
Hello
I bought an iPod for my son's birthday last month and it had a password on it, but then later removed. Last night, the iPod randomly asked a password and then locked my son on his iPod. The old password does not work.
I tried to connect the iPod to the iTunes and restore/update, however once it has finished updating always requires a password. He also continues to ask for access to the iPod, which, it seems, I can only confirm the iPod once the password has been entered. I don't know why he asked for access, as is my son's computer has used for its iTunes and load, etc., so I think that he already had access to the iPod.
Force restart does not help remove the question of password either. I also tried to update iTunes, but I'm out of ideas.
Someone at - it any other suggestions?
Thanks in advance.Hi Dolando,
I'm sorry that you have questions. Are you sure you are resetting your iPod correctly and restore with the image of a cable to plug into iTunes logo when you reset your iPod? If you do not have this click here.
-
Generation of password expiration every day
What I want to do is to lock a part of a program with a password is only good for 24 hours. The user must call and request a new password, I am able to provide without any contact with the user's computer. I was thinking some kind of password generator that runs on my computer and the computer of the user who works outside the current date and id of the computer to make the passwords for each unique user. Do you know the code or suggestions that work as a point to jump?
Will be something like this work for you? This is an example of security through obscurity, but you can mix a little to decrease the likelihood of a person to guess your algorithm.
The Digest MD5 vi is OpenG, here.
-
Auto generation of serial number in table form
Hi all
I need to implement number line concept as in the Oracle Applications in my Apex a table
(IE):
If I create 3 files in tabular form, it should appear as shown below:
Line number Example1 Sample1 2 Example2 line number must be a number that is automatically generated and must be a database column (ie), we need to show as text (saves the State) column in the form of tables since it is not editable by the user.
"In case I have delete a record, it must be as shown below.
Line number Example1 Example2 (IE) but I deleted the first record it should automatically change the line number of the second record to 1.
and if I update the tabular presentation by adding another line, then it should appear as shown below:
Line number Example1 Example2 2 Sample3 This functionality is achievable in apex? can someone help me?
I use APEX 4.2.2.00.11 version.
Thank you and best regards,
Madonna
Hey Madonna,
".t20Report" is a cass which refers to your report, I guess. Since you only have a single report, the index will be never greater than 1.
What you want to do is to look at each line of the table in this report and to count the index of each line:
$('.t20Report_tbody_tr').each (function () {}
var i = $(this) .index () + 1 //javscript index is 0, sql is 1
$(this) .find ('td [headers = "ORDNO"] input') .val (i)
})
-
Hi friends,
I'm new to IOM, and it comes to my requirement: implement IOM 9.1.0.1
The applicant raises a request for a resource,
1. If the applicant is not a Manager, then the request should be attributed to his manager and an e-mail should be addressed to the Manager.
a. If he approves it, he should go to the approver group and an email for him.
b. is not approved, an email should be sent to the applicant on failure.
2. If the Manager triggers the application of the secondary value axis then the request goes to the approver group and an email for him.
What should I do to implement this,
Can you guys please explain to me the steps in order because I am new to IOM.
It would be useful that you guys can share codes Java Template.
Thanks in advance, best regards,
SKYes
You can use gmail id if you have configured your server successfully with IOM.Find the details at the link below:
-
Before, I said Safari 'never remember the password"to a certain site. How to cancel it? I want to now Safari auto fill the password.
Safari/Preferences/passwords / Add.
-
Firefox on windows 8.1 is AutoFill password field when autocomplete is disabled.
Hello.
Firefox (latest version) for windows is auto-fill a password field, even with AutoComplete is turned off.
The HTML code for the fields are:
< input name = seized semiautomatic "member_password1" = "off" type = "password" >
< input name = seized semiautomatic "member_password2" = "off" type = "password" >
Leave the empty password to automatically generate a passwordIn all other browsers, it works very well, and the saved password is not added, but Firefox on Windows 8.1 it is be populated automatically, with the registered user password.
Thanks - I'll see what I can find. Almost a shame Mozilla simply ignores these fields well.
Such is life!
-
I am a support agent and I got a task that requires the connection to 4000 + user accounts with my admin password. After you enter the password manually for the 150th time I started to wonder if there is a better way to do it.
Is there any password manager that will automatically put the same password - all - user name on a specific Web site?
Update:
I just found an auto with the password field: https://addons.mozilla.org/uk/firefox/addon/autofill-262804/ , it was easier than I thought.jscher2000, cor - el, I thank very you much for pushing me in the right direction.
-
It won't AutoComplete passwords after completing my username, how do I turn it back on?
I'm spoiled me. Firefox will remember my username, email sign in for example. After you type the first letter of my username, it shows me the rest. After I selected my password is already entered for me. It was great, because I didn't remember a lot of passwords. But now, for some reason, it isn't doing that and I don't remember a lot of my passwords. Do you know how I can fix this? I want that it auto fill my password for me.
Thank you
Open Firefox-> go to the Tools Menu-> Options-> Security
-> Passwords-> Place section CHECK 'Remember password for Sites'
-> Press "Exceptions."... '-> click 'Remove all' in ' Exceptions - saved Passwords "window-> press-> close click OK in the main window of Options -
HOW TO RESET THE MASTER PASSWORD AT STARTUP MENU WHEN MY COMPUTER STARTS
When I start my pc it auto asks a password befor it begins even windows... what I've done is go to f2 and added a witch of master password, I have today forgotten... it is anyway I can reset or remove... my computer won't let me do anything until the ive entered this password or... HELPPP
Unplug it power cable and if you remove the battery from the laptop and remove the battery CMOS and let sit for a few minutes, plug the power back in and try to start again, you will probably get a cmos error such that it resets the date and time and set the bios settings to the settings but it must clear the password. Check out this you tube video, it's for laptops, but if you have a desktop computer, it will give you the basic idea: -.
Maybe you are looking for
-
Since the last update when I load a new web page, the page loads fine but as soon as its loading, it just goes right to the bottom of the page - its very annoying I'm under Aurora on windows XP service pack 3 Thanks Cor - el your advice has solved th
-
hoe start ik en ik veronderstel dat says alleen op Alchemy is als men een lunch aansluit?
This may sound stupid, but I don't have access to the Alchemy synth! so I think that maybe it is only available with connecting a MIDI instrument?
-
Wireless engine 100 HP LaserJet color MFP M175 PCL6 error
After each print job, I get the message on printer screen 'engine press [OK] error' even once, it will print only after pressing the Ok button. Is there a solution? HP printers have not been otherwise reliable, I'm not buy nested, if it cannot be r
-
How can I recover the missing titles C:\Windows\system32?
How can I recover the missing documents?
-
Windows XP for a Linksys wmp54g drivers?
Anyone know where I can find drivers Windows XP for a Linksys wmp54g v4.1 PCI Wireless NIC? Aliens have stolen the CD and excellent customer service at the Linksys is no longer provides them ("No firmware/driver download available").