Similar Questions

• Training activity does not save on Apple Watch

  Hello

  After a few months of working fine, all of a sudden when I finished a workout 'Other' activity me not is given the option to save the workout.  It is just to get back to workout options screen when you press 'end '.

  Also, I noticed that during the training that he does not show activity when I put my wrist, even if this field is selected on the iphone with "CV last activity", so I'll have to press the wheel to return to the main screen to be able to select "training" even once.  Not sure if this is related to the problem.

  All software seem to be up to date and I tried the classic "turn off and on again.

  The rest of the watch seems to work without problem, it's just what is a little annoying because this monitoring activity has been one of the main reasons to have the watch.

  Any help + tips gratefully received.

  With many thanks and best wishes

  Nicola

  Hi Nicola

  Try the following steps:

  • Close open applications on your iPhone:
    • Double-tap the Home button, and then drag upward on each Preview app to close.
  • Restart your iPhone and shows. The two put together, and then restart your iPhone first:
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
    • To turn it on: press and hold the side button until you see the Apple logo.

• Photosmart more B209a-m does not connect with apple airport extreme base station

  I use the B209a-m wireless with a netgear router OS6.  I just changed the Netgear to an apple Airport Extreme router.  All my other hardware connected successfully with the new router but the B209a-m says "no connection found."  I know the printer is well within the router.  I have reset the factory settings on the printer.  I've disabled the system and restarted.  None of this has worked.  Suggestions?

  Hello

  You should not connect it to the airport.

  You must connect the printer with a USB port on your Mac, then run the HP installation wizard.

  From there, you will be guided to provifde the details needed to establish the connection between the printer and Airport Extreme wireless.

  Once the process will be completed and set up the wifi connection you will be guided to unplug the USB.

  You must use a USB cable high speed standard, not longer than 2 m in length.

  The square end must be connected to the USB port located at the back of the printer:

  

• T510 does not connect to apple 30 view through mini dock

  I'm having some trouble connecting my T510 (NVS 3100 m) but my thinkpad mini dock more series 3 (4338). I use a dvi cable.

  So far, the only resolution that I am able to is 1280 x 800... instead of 2560 x 1600.

  Any suggestions?

  If possible, I'd rather not get display port / DVI adapter.

  THX

  Europa

  only the displayport on the platform can support the Apple 30 inch monitor to its WQXGA resolution.

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-72873.html

  Two DisplayPort monitor support resolution of 2560 x 1600

  If you need dual link dvi, you will need to get a Displayport active Dell converter DVI dual link for $99 USD.

• iPad2 does not connect to check if the software updates or download items

  iPad2 does not connect with apple to check the software updates.

  Hello

  Go to main itunes down the apple page ID sign out and then sign.

  Who can help.

  See you soon

  Brian

• iPhone 6 Apple Watch and BlueAnt q3 does not connect at the same time.

  IiPhone 6 + Apple Watch and BlueAnt q3 does not connect at the same time

  My Apple Watch and Blueant Q3 connect at the same time. You try to connect the Q3 and the watch to the iPhone, or you try to connect the Q3 of the watch?

• WiFi and apple tv does not connect for Colocation

  WiFi and apple tv does not connect for home sharing

  Please give more details about your configuration, the version of the Apple TV and software, home sharing server, etc. Others here know much more about it as I have, but they will need a clear description of the problem. You can also try to search for this site for home, sharing problems and take a look at any recent threads that you present to.

  You use the same Apple ID everywhere? ATV currently sems to have problems with Apple improved authentication protocols, so I hope they are not turned on for your Apple ID. You have enabled sharing House in configuration of the ATV?

• When I try to activate my Apple Watch after matching it does not accept my apple ID.

  My 5s was stolen that had my Apple Watch combined with him (my Apple Watch has not been stolen). I restored my new 5 to my final point of restoration of old 5s, I tried to log in with the apple ID, but could not remember my password so I reset properly, now when I try to pair my Apple Watch to it, it does not accept my apple ID which I know is correct.

  So I reset my watch.

  I tried to put the two unit off then but still not good.

  Does anyone have any suggestions?

  Hello

  The following steps can help, including the disabling of Activation on your Apple Watch blocking:

  • On a computer, in a web browser, go to: https://www.icloud.com/
    • Sign in with your Apple ID > settings > my devices > click your Apple Watch > click the 'X' next to the watch > click on delete to confirm.
  • On your iPhone close apps open (including the app shows):
    • Double-click the Home button, and then drag upward on each of the app previews to close.
  • Disconnect from iCloud and reconnect again on your iPhone:
    • Settings > iCloud > disconnect (bottom) > sign in (using your new password).
  • Restart both devices, both turn off together, and then restart your iPhone first.
  • Try to set up your watch once again, choosing backup restore when the possibility:
    • Set up your Apple Watch - Apple Support

• Why is my Apple - Super Drive CD does not connect to my iMac?

  Why is my Apple - Super Drive CD does not connect to my iMac?  That was before I upgraded to el Capitan.  Now it will not allow CD insertion and the icon does not appear on my desktop.  However, the device is displayed in the Finder and seems to rest for more than 15 minutes, try to connect.  Any advise appreciated.

  try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• does not connect Remote app for apple tv

  distance does not connect

  I have another tv already connected to the app and when I got the new apple tv 4th Gen it connected but now, it won't.

• I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work

  I have a Macbook connected via WiFi to a Canon MG7520. The destination of auto scan does not work. I put it in a subfolder under photos. The box is there on this subfolder. (My older guns would use) But this scanner and the 7120 times insist on ignoring my selection and use of the pictures folder. (when I save, they won't have a record dated in photos, but I would rather not clutter it.)

  Nobody likes Macs.

  When you open the settings of the utility Scan IJ, there are 3 tabs at the top. The first tab is settings when the analysis is started from the computer, the second tab is for setting when the analysis is started from the control panel. Make sure that you change the destination folder to 'Save to PC (self)' on the second tab!

• Broadcom netlink gigabit card does not connect to 1 Gbit/s, auto negotiate connects to 10 Mbps

  Hello

  I am very satisfied with my purchase Alienware Aurora ALX and happy to be part of this community.  However, I have this problem:

  Does not connect to 1 Gbps Ethernet adapter; Here's what I've tried so far:

  (1) confirmed that my router is able to support Gigabit Ethernet.  I have two other devices connected to the same speed (an old PC and NAS).

  (2) when I set the speed and duplex of the adapter auto negotiate, it will connect to 10 Mbps

  (3) I noticed that there is no setting for 1000 Mbps in speed and duplex options.

  (4) I tried 100 full duplex MB, it will connect, but my Internet connection slows down less than 1 Mbps (I'm on a 15Mbps connection and test the other PC it could reach around 14Mbps).

  (5) I then tried 100 MB half duplex, it will also link and my overall network performance is good.

  (6) I have confirmed that I have the current driver from Dell. I've had the computer for 3 days (using windows 7 by the way).

  (7) I tried all ports on my router and confirmed that the side of the router has also been on auto negotiate and not trying to force a specific speed.

  I hope someone has a solution or suggestion for this problem.

  Kind regards

  Jason

  * SOLUTION * thanks in part to the previous article.

  Here is the Giga speed solution that worked for my new Dell Studio 1458.  I've read a lot about speeds slow xfer using the Broadcom NetLink LAN connection.

  There were two things I did not initially, but were in fact true.

  (1) you must use a CAT 6 line on ALL your machines capable of gigabit.  I though that a good line of Cat5e support giga speeds.  This isn't.

  Card Dell NetLink is apparently, some initial negotiations with your router (a bit ' as a fax machine), then after seeing all of your connections.

  It will drop the xfer rate down to the lowest common component (i.e. the Cat5e cable).  And;

  (2) map of NetLink won't give you giga speeds in automatic selection (advanced ethernet properties, speed & duplex).  The speed and the duplex window will never

  view 1000 MB!  You can check if your is10/100/1000 connection by double clicking on the icon of your connection to the Local network.

  I checked the speed of my connection giga via a test utility and transferring a 200meg file.  The results indicate an increase in the speed of 12 MB/s to 26 MB/s.

  These figures do not show a factor of ten speeds increase, we'd all have (so much), but they are in line with transfer rates of others.

  I hope this helps!

• Bluetooth does not connect on iOS 10 and sierra OS

  I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

  I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

  I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

  It seems that the "it just works era" is over for apple.

  If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

• distance does not connect

  Logic remotely allowing to work on this system. Now does not connect the remote control. Using the logic 10.0.7 and system 10.8.5

  Not wanting to update system (work of plugins) and logic don't increase past this due to 10.8.5 I guess.

  Guessing the app remote has updated itself?

  Someone knows how to get these guys to play nice as they once ddi?

  Yes... the last LR now requires the latest version of logic to work correctly...

  Since LR iTunes Info page...

  The system configuration required

  Requires iOS 9.1 or later

  iPad support requires Logic Pro X 10.2.1 MainStage v3.2.3 or GarageBand v10.1

  iPad support Pro requires Logic Pro X 10.2.1 or MainStage v3.2.3

  support iPhone requires Logic Pro X 10.2.1

  I hope that you have a backup of the iPad in iTunes so that you can roll back the LR app on your iPad... for an earlier version, otherwise you are stuck, I'm afraid to say...

  Note: I recommend not turning not not on automatic updates on IOS or OS X devices due to these types of problems after applications or operating systems are automatically updated...

  In IOS...

  Auto power off app updates may be a bit difficult to find in the settings, but follow these quick steps and you'll be done without delay. Under the Automaticdownloads section, you will see an item called updates. Tap the toggle switch to turn it off so that it goes from green to gray.

  In OS X...

  There is a new default in OS X Mountain Lion. You can turn it off by going to the Apple, system preferences menu, and then selecting the Software Update pane. Uncheck all the boxes next to 'Searchautomatically the updated'and 'Download newly available updates in the background'.

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection