automate the Action of the substitution of export step

Similar Questions

• Automate the query which export to excel

  Hello
  
  I don't know if this is the right place to post this question... but...
  I have run some queries every day and export to an excel file and send by e-mail every day, there is a way to make it automatic?
  
  Does anyone have a suggestion?
  
  Thank you
  
  Leandro Takeda

  You can use Dump_Csv developed by tom kyte. Here is the code that I modified for my needs.

  create or replace function  dump_csv( p_query     in varchar2,
                                        p_separator in varchar2
                                                      default ',',
                                        p_dir       in varchar2 ,
                                        p_filename  in varchar2 )
  return number
  AUTHID CURRENT_USER
  is
      l_output        utl_file.file_type;
      l_theCursor     integer default dbms_sql.open_cursor;
      l_columnValue   varchar2(2000);
      l_status        integer;
      l_colCnt        number default 0;
      l_separator     varchar2(10) default '';
      l_cnt           number default 0;
  
       l_colDesc          dbms_sql.DESC_TAB;
  begin
      l_output := utl_file.fopen( p_dir, p_filename, 'w' );
  
      dbms_sql.parse(  l_theCursor,  p_query, dbms_sql.native );
  
      for i in 1 .. 255 loop
          begin
              dbms_sql.define_column( l_theCursor, i,
                                      l_columnValue, 2000 );
              l_colCnt := i;
          exception
              when others then
                  if ( sqlcode = -1007 ) then exit;
                  else
                      raise;
                  end if;
          end;
      end loop;
  
      dbms_sql.define_column( l_theCursor, 1, l_columnValue, 2000 );
  
      l_status := dbms_sql.execute(l_theCursor);
  
       dbms_sql.describe_columns(l_theCursor,l_colCnt, l_colDesc);
  
       l_separator := '';
  
       for lColCnt in 1..l_colCnt
       loop
              utl_file.put( l_output, l_separator ||  '"' || Upper(l_colDesc(lColCnt).col_name) || '"');
                 l_separator := p_separator;
       end loop;
  
       utl_file.new_line( l_output );
  
      loop
          exit when ( dbms_sql.fetch_rows(l_theCursor) <= 0 );
          l_separator := '';
          for i in 1 .. l_colCnt loop
              dbms_sql.column_value( l_theCursor, i,
                                     l_columnValue );
              utl_file.put( l_output, l_separator ||  '"' ||
                                      l_columnValue || '"');
              l_separator := p_separator;
          end loop;
          utl_file.new_line( l_output );
          l_cnt := l_cnt+1;
      end loop;
      dbms_sql.close_cursor(l_theCursor);
  
      utl_file.fclose( l_output );
      return l_cnt;
  end dump_csv;
  

  Thank you
  Knani.

• automate the action for the PDF in the batch command

  Hello

  I would like to completely automate certain actions, I use pdf files.

  So I as Photoshop would treat an action on all of the pdf files in a given folder.

  I know I can using the batch command him.

  Unfortunately, I need to change a setting by opening the pdf file: "Cultures in: Art Box."

  When I automate this openness to an action, the file is already specified, but I always want to open files in my folder.

  I hope that I have noticed my problem.

  How can I open each of the pdf files in a folder bearing ' Crop to: Art Box ', treat my action on each one and then save these files again with a small extension in the file name?

  (In the command batch dialog box, it is easy to change the file name for recording, but I can't manage it in the composition of this specific task :/)

  Thanks in advance

  Alex

  P.S.: I use Photoshop CS 5.5 on Windows.

  Unfortunately, conversion of a file is not the same as opening a file.

  Have you tried processor Image (or Image Processor Pro)?

• The substitution of YouTube export delays

  Hello

  I would use the YouTube preset 1440 x 1080 PrE10 output option but it limits me in 15 minutes.

  I have a YouTube post of account that allows more than 15 minutes.  Is it possible to override this limit in PrE10?  Or is there a way to recreate a similar output option in the output settings IE Flash.

  I use 720 p flash power settings for my video of 1440x1080p but wanted to see how the video looks at youtube, if it is downloaded in 1440 x 1080 native.

  I can't seem to find a way to specify the format 1.33: 1 in one of the outputs.

  Maybe I need to go to the regular establishment to do something like that?

  Thank you!

  Jeremy

  Jeremy,

  To exploit the full potential of your YouTube account, just manually / the share of exports of pre and then manually download them through your account. Direct uploading to YouTube of meadow has been coded, where there are time limits, which have now been expanded. YouTube is a "moving target", and at the time where a program like PrE, is released, the target has moved again.

  As I do very little influence on YouTube and did not have any HD Amamorphic, I can't help with this NORMAL 1.33, but others can probably.

  Good luck

  Hunt

• How to automate the unique fusion of multiple JPEG to PDF files.

  I'm looking for an answer that does not purchase a license, or by downloading a shaded part of software.

  I have a batch of a software suite that creates multiple JPEG files every morning. The final product must be a single PDF, prefer it to order a certain way, but not completely necessary. I tried to do it thanks to Excel, but it was very awkward. I'm trying to implement through Adobe Action Wizard and can create the file I'm looking for, but I can't find how to automate in a batch file that I can task in Task Scheduler.

  Currently, I run a file backup all export to PDF and JPG. I then insert page for each PDF in the order I want to insert Pages using the. I can't understand how to automate the Action once it is implemented.

  These are designed to run early in the morning and the PDF picked up by different software and sent to before the start of the day.

  Any assistance in the automation of an action would help enormously.

  Thank you.

  I think you should forget Acrobat. Batch jobs need under license for this software. Acrobat is not. Software Adobe for the server might cost 100 times more.

• 11.1.2.3.00 recommended to automate the Migration of production to Test

  Hi all.

  I would like to migrate the following items of Prod to Test and want to automate completely.

  Shared services

  Manager of Calc

  Planning

  Essbase

  HFM

  EPMA

  Can anyone provide a high level of how they would be fully automate all of these objects, including the automation of deployment of applications of EPMA and in what order?

  In addition, guidance on what to monitor (i.e. the issues or security) will be greatly appreciated.

  The recommended route is to use LCM which has a command line utility, so can be automated, LCM also has the ability to export/import all objects by using a utility.

  EPMA also offers a command line utility, so you can automate the deployment.

  HFM, you can use the utility to copy app.

  The problem you face is that LCM don't really remove it from target to make it work much better when it's a clean environment if you want to source and target to match.

  See you soon

  John

• How to use the substitution in case of construction dim variable

  Hi all

  Lets say I have 3 void / vars - Prevmonth prevmonth-1, prevmonth-2. These change every quarter.

  I want to build a cube that will be who will have only 3 months preceding the fiscal dimension. This will serve once at the end of the quarter.

  What should I do for the substitution if build rules files variables dim? I want to automate the process. We have Sun for other dims build SQL, only the Sun can be built as flat file.

  Or y at - it another way to do this Besides using sub vars? I can try to store 3 variables in a table and then use them to create the cube, but want to see if we can avoid creating an interface more.

  Thank you.

  You can use substitution variables, as in the SQL of the charge state - rules for the Substitution Variables

  See you soon

  John

• Giving users the ability to export reports?

  I have a new user who wishes to export reports, but cannot. There was formerly a place on the screen change the user where you can turn on/off the ability to export, but it is not more. What happened and how can I give this user this ability?

  Thank you.

  Who knows where these things but I found a way to do it through security groups. Go to settings > users > groups (tab) and then click the name of the Group and in the right window, there is a list of the different things to change, click 'Action permissions' and it should be the first point to the analysis > export the report data.

  I don't know how to do it by the user.

• Problem: video downgrades the quality after exporting

  Hello world!

  IM new and this is my first question on the forum.

  Now, I created 10 succesful videos with Adobe Premiere Pro, editing Gopro videos 1080 p 60 fps.

  My new video, I started using my phone Samsung Galaxy Neo S3 content.

  The problem: after exporting my video, the quality of Gopro videos is like 480 p, but I still want the quality as the original, 1080 p 60 fps.

  What I need to do / how can I solve this problem?

  Relevant information:

  Laptop specs: Windows 10 960 M from NVIDIA, Intel core i7.

  Export format: H.264.

  I tried already rendering in modes: Youtube, Vimeo 1080, Match source 1080HD high flow, I ticked the box "maximum render quality".

  But nothing is done, the quality of the videos Gopro changed as 480 p after the export of the video.

  Please help me.

  Although I have not any more wise, I found a solution on Youtube.

  In my calendar, there is a yellow bar. I had to click "sequence" and then "render outside". Then the bar turned green.

  Then I had to select the export mode: HD 1080 p 29.97 fps.

  Then, as in my first picture, you can see "basic video settings".

  You can scroll down here, and there is also a "fps rate" which was 30 (automatic).

  I had to change at 60 frames per second. It is also recommended to check the box "made to maximum depth" in the audio and video tab.

  The size of the file push double (200%), but the quality is good as it should.

  I want to thank you for your efforts and help.

• change the settings of export based on photo

  Hi all, I searched a lot, without finding an answer to this task: I need to change the settings of export based on unique photo, for example settings megapixels resize factor rating function.

  I know that export settings can be changed with updateExportSettings but it is global for all photos of.

  I also know that in the Export Department, I can define a processRenderedPhotos function in the loop inside the session: "renditions", I can do additional actions on each photo, but after having been made.

  I know finally I can define a filter Service where to put the postProcessRenderedPhotos function, but it is a post-processing work so after the photo was made and registered...

  Then... How do I? Where to put code to change exportSettings for each photo based on a feature of the photo?
  Thanks a lot for your help

  Julian

  How to access every photo in the function "filterSettings = function (renditionToSatisfy, exportSettings)"...? As I said, I need customization of the exportSettings based on characteristics of the photo, so I need to access the photo associated with a current rendering: how?

  The 'renditionToSatisfy' argument is class LrExportRendition, and renditionToSatisfy.photo gives the restored LrPhoto.

• Automate the assignment of color profile.

  Hi all.

  
  

  I wonder if it is possible to automate the batch assign a color profile specific to a folder with the .eps files and save them as .ai (keep the color profile logically said)

  
  

  I tried with the actions of the Illustrator. Yes, I managed to open the files in the folder and save AI, but I can't do the color profile is assigned. It is possible with Illustrator or bridge?

  
  

  Thank you and sorry for my bad English

  Bridge could do with Photoshop files, but will not work with the .eps image processor.

  Try to contact Gustavo while he was working on a script

  GOT award of ICC profile format or EPS (which doesn't have a profile)

• Automate the feature in After Effects

  Hey guys!

  I am new to AE so this question may seem simple to you, but if you help me find the answer I'll be very grateful. I wonder if we can automate certain actions applied to its different definitions for the other group of clips? What I'm saying... For example, we work with 3 different pieces of video over a background image. We are dealing with inlay, resizing of objects, color corrections, etc and then put all 3 items on the background image. I request then I take 3 other different pieces (from other sources of the clamp) and automatically applies the same actions for them? If it is possible that would help us save a lot of time... Thanks in advance for your answers!

  You can replace the images by selecting the new images in the timeline, and then select new images in the project Panel and then hold down the Alt/Option key and drag the images of replacement to the timeline. This works as long as the sequence is the same size and speed.

  You can duplicate the layer in the timeline panel, and then replace the images in this double.

  You can select all properties animated or modified in a layer by pressing the U key twice, and then by selecting everything in the layer that was changed by drag a selection around them, then go to "Preset" Animation-Animation-Save. You can then use this animation preset to apply exactly the same animations and effects in a new layer.

• Automate the VMware Snapshots

  I'm looking to automate a task with regard to snapshots in 5.0. Before launch us updates Windows take us a snapshot of each system manually. I would like to have a script that can automate the creation of snapshots and then run another to remove the next day. I found a script that will take a glance of all my servers, but I was looking for a way to do it by a list. Does anyone have any suggestions? I am new to scripting.

  you could do something like this in excel, csv

  Column1 Column2 Column3

  New-Snapshot -VM    VM        -Name BeforePatch
  

  then the export in Notepad, remove the comma and then save it as ps1.

  do something similar with the removal of the snap

• Automate the VMs using PowerCLI performance report

  Dear Experts,

  I want to automate the monthly performance report (CPU, memory, disk) of the Virtual Machines using PowerCLI or any other script. Basically, I want to do under the tasks mentioned on monthly basis:

  1. use of the CPU (of all virtual machines) statistical average based monthly (as a percentage). Same report for memory (in percent) and the disc (Kbps).

  2. is it possible folderwise? I have several clients in my support infrastructure and I made segregation in making records and for each of them, this report is necessary.

  3. export only these 3 reports in Excel.

  Details of the infrastructure: ESXi 4.0 and 4.1

  Dear Experts, your kind suggestions will be much appreciated? As it takes a lot of time as we do this manually.

  Thank you very much!

  No problem, with the Group-Object cmdlet we can divide the result by VM.

  $metrics = "cpu.usage.average","mem.usage.average","disk.usage.average"
  $start = (Get-Date).AddDays(-30)
  
  $folders = Get-Folder -Location (Get-Folder -Name vm -Location Datacenters)
  # $folders = Get-Folder -Name Folder1,Folder2,Folder3
  &{foreach($folder in $folders){
      $vms = Get-VM -Location $folder    if($vms){
        $stats = Get-Stat -Entity $vms -Stat $metrics -Start $start -ErrorAction SilentlyContinue      if($stats){
          $stats | Group-Object -Property {$_.Entity.Name} | %{
            New-Object PSObject -Property @{
              Folder = $folder.Name            VM = $_.Values[0]
              CpuAvg = ($_.Group | where {$_.MetricId -eq "cpu.usage.average"} | Measure-Object -Property Value -Average).Average            MemAvg = ($_.Group | where {$_.MetricId -eq "mem.usage.average"} | Measure-Object -Property Value -Average).Average            DiskAvg = ($_.Group | where {$_.MetricId -eq "disk.usage.average"} | Measure-Object -Property Value -Average).Average          }
          }
        }
      }
    }} | Export-Csv C:\report.csv -NoTypeInformation -UseCulture
  

• Script to automate the affinity of the crib of DRS-groups

  Hello

  I am trying to automate the rules of affinity for the drs Group Manager. The idea is to let some virtual machines running on

  assigned to the esx host (type 'Run VMs on Hosts' / 'Should run on hosts in the group').

  Background: we have esx hosts in two data centers interconnected 10 giga with a metrocluster netapp on each site hosting the nfs exports. I created two groups of type "Host DRS Groups" (in datacenter esx host a go into one, hosts datacenter b go the other) and two groups of type 'Machine virtual DRS Groups' (virtual machines hosted on export nfs one go into one, while the virtual machines hosted on nfs export b go the other). In this way, we can prevent nfs/iscsi traffic across data centers.

  Create the rules manually in a small cluster works. However with dozens of virtual machines in the other groups, there must be a way to automate the task and that it is regualary. I let powercli generate a list of VMS according to nfs export (hard location is either the field a or site b) then import the given in the Virtual Machine DRS group concerned.

  Using get-drsrule-Cluster 'cluster ' | Export-CliXml does not display a details for groups of DRS HOST or Virtual Machine DRS. Is it possible to do it at all? I recon using set-drsrule let me import rules.

  Any help / ideas is appreceated.

  Concerning

  Sascha

  The current DrsRule cmdlets do not, all I know, allows you to work with groups of DRS.

  As an alternative, you can use the ReconfigureComputeResource method that is available.

  The script should look like this

  $clusterName = "MyCluster"
  $cluster = Get-Cluster -Name $clusterName
  
   $spec = New-Object VMware.Vim.ClusterConfigSpecEx
  $groupVM = New-Object VMware.Vim.ClusterGroupSpec $groupVM.operation = "add" $groupVM.Info = New-Object VMware.Vim.ClusterVmGroup $groupVM.Info.Name = "Grouped VM" 
  
  Get-VM -Name MyVM1* | %{
      $groupVM.Info.VM += $_.Extensiondata.MoRef
  }
  $spec.GroupSpec += $groupVM
  $groupESX = New-Object VMware.Vim.ClusterGroupSpec $groupESX.operation = "add"$groupESX.Info = New-Object VMware.Vim.ClusterHostGroup$groupESX.Info.Name = "Grouped Host"
  
  Get-VMHost -Name MyHost1* | %{
      $groupESX.Info.Host += $_.Extensiondata.MoRef
  }
  $spec.GroupSpec += $groupESX
  $rule = New-Object VMware.Vim.ClusterRuleSpec$rule.operation = "add"$rule.info = New-Object VMware.Vim.ClusterVmHostRuleInfo$rule.info.enabled = $true$rule.info.name = "Test DRS group rule"$rule.info.mandatory = $true$rule.info.vmGroupName = "Grouped VM"$rule.info.affineHostGroupName = "Group Host"$spec.RulesSpec += $rule
  $cluster.ExtensionData.ReconfigureComputeResource($spec,$true)
  
  The script first creates 2 DRS groups. One with the VMs and one with the ESX(i) servers.
  

  In the example, there all customers whose name starts with "MyVM1" for a group and all hosts whose name begins with "MyHost1" to the other group.

  These 2 selections will of course be changed for your configuration. Let me know what selection rules you want to implement for virtual machines and hosts and I can update the script.

  The script then creates a rule. Note that the rule specifies $true for the "required" property

  This means that a virtual machine will not be powered on if the placement host does not match the rule.

  The 2nd parameter to the ReconfigureComputeResource method allows you to specify if the changes defined in the $spec to add or not.

  If it's not $true all your cluster settings, except for the groups and the rule will be deleted. So, attention!