Giving users the ability to export reports?

Similar Questions

• How to give users the ability to select the rate based on HSP_Begin, HSP_Average or HSP_ending

  Hello

  We wanted to give users the ability to select the rate based on HSP_Begin, HSP_Average or HSP_ending.  How you would achieve this?

  I have some ideas:

  (1) a less optimal solution is to create a user variable called FX_Beg_Ave_End, and then run a HBR script to perform the conversion of FX before completing the form.  The HBR will prompt the user to enter "HSP_Begin, HSP_Average or HSP_ending.  He's going to calc and display the converted data in the form based on the user input.  It's embarrassing because users must type in 'HSP_Begin, HSP_Average or HSP_ending' to all forms.  It is also better to pull data directly from one of the members: 'HSP_Begin, HSP_Average or HSP_ending'.

  (2) a better alternative is to put the POV of the form points to the variable user FX_Beg_Ave_End.  When the form appears, it will draw the name of the FX_Beg_Ave_End member variable and display the data of the Member (for example 'HSP_Begin, HSP_Average or HSP_ending') stored in FX_Beg_Ave_End.

  Thanks for your ideas.
  

  Hello

  In fact for your option, so you could make a selection of members would not have users typing the name.

• RIM please give users the ability to edit comments

  It is difficult enough going through and sometimes people leave bad reviews simply because they have not read the instructions on how to launch the product.

  In most cases like this, they contact the developer and finally get the product to work but are unable to change their review or add a new.

  I hope someone passes this everywhere on BOARD if it has not already been suggested

  In my view, that the notice of application is the ability for the user to change the access to its review, not the developer.

  I addressed some shortcomings mentioned in the comments of my product, but my clients cannot go back and change their initial review to reflect the improvements.  It is a system of review quite unsatifactory.

• What is the best way to give a user the ability to stop a vi or rerun it? I wrote something that works, but I imagine that this is not the best way to do it.

  I have a VI that executes a stepper motor, and then stops. I wanted the operator to have the option to re-run the VI or causes the complete stop. To do this, I added a while loop around the whole VI. I have an example VI showing how I made it, but I don't know that there is a more effective approach. Any suggestions?

  Thank you.

  There is almost never a good reason to use the stop signal stop execution.

  Your loop is fine.  What you really want to do, is make a machine to States which has at least 2 States. 1. perform the test.  2 inactive, waiting for the user to hit a button to re-run, or hit a button to end program.

• Why is that I lost the ability to export documents with facing of InDesign to PDF pages?

  It's very frustrating because I've never had this problem before in InDesign, but for some reason my document refuses to export to Adobe Acrobat with facing pages. I'm not an A3 spread, just beside pages which I can then export to Word, maintaining of the layout.

  I have tried everything that I can think of export options but nothing works... Help, please!

  InDesign (opposite page) > > > export options > > > Adobe Acrobat (single pages)

  

  On a side note, when I export PDF to Word files, I lose all the transparency settings. Is - this avoidable?

  Jamie, I also have clients who work only in Word. You save a lot of time and frustration by designing simple and good documents that can be created in Word. It is not as fun as in InDesign, but the customer is King, and you are the professional

  You're hitting your head against a brick wall because InDesign is not intended for such use.

  Rather, I complain on the other side, because it looks so limited word in the possibilities for me.

• CC for the Government always offers users the ability to work from home?

  I'm working on an air force base and we received subscriptions CC but the software is modified to not call home or something like that so they work within our security settings. We would like to be able to install this software on our computers in the House so that we can test and experiment a little. I know companies can allow there used to install it on another machine, but of what claims the I.T. Guy, we do not have an ID or an email linked to our account. Is this true? If this is not the case, how I understand what are our IDs?

  One else experience this problem?

  Hello

  This seems to be a license unit.

  Follow: creative cloud help | Create packages with the device licenses

  Hope this helps

  Thank you

  Varun

• Fact Acrobat DC * Standard Version * have the ability to export PDF files to TiFF files?

  It's more to decide which version to buy to meet the requirements of the staff. Thanks in advance for your help and advice

  Yes. See: Plans and prices: compare plans | Adobe Acrobat DC

• Export reports updated using the DataTransferService

  Hi all

  I'm trying to set up a synchronization with our Eloqua instance by exporting saved reports using the DataTransferService API.  Documentation, it is said:

  Before you export data through most of export system, you will need to connect to the user of Eloqua® interface and create excerpts from standard data that you will run. You will need create a report 'saved' in Eloqua®, and then configure the report registered for export. Once that is done - the newly created export report will be shown in describing assets DataExport via the API.

  
  

  I created the report saved a contact filter; How to "configure this report backed up export?  When I look at the results of DescribeAssetType ("DataExport"), I don't see my report saved listed (I guess that's because I've not implemented for export again).  What Miss me?

  
  

  Thank you!

  Chung
  

  Nevermind, I figured it - go to the Admin report | Agents and using the drop-down arrow next to my name, select 'new on-demand report export.  Wow, it was hard to find! I hope this helps.

• Report on the ability of virtual machines VMware Cluster

  We started to evaluate Foglight for capacity planning and evaluation. One of the reports that I believe is interested in our leadership is the "ability of virtual machines VMware Cluster" report. I see that the report provides a value for the VMS remaining. I would like to learn a little more about this value and how is it calculated:

  1. What exactly a 'virtual machine' represents in these reports?
  2. Can a similar report to run using a specific type of server based on the allocation of resources or patterned after an existing VM wokload?

  We are a small, medium and large VM offering based on the allocation of resources. I would like to change the report to display the number of each type of virtual machine I have available... or pointer pointing to an existing virtual machine, and according to its resources and workload, determine how this server, I have available.

  It is based on the average size of the virtual machine in the cluster.  If you look at the dashboard of capacity management in the user interface, it can give you more details by cluster.  It is based on the average of the use of min/max/AVG across all virtual machines in a period given (usually 90 days).  This can not be changed today, but there is work to allow lets you specify a size of slot for something as small, medium, large, etc...

  This feature exists in the Foglight for virtualization, however Standard Edition.  It might be interesting to watch this, if you need it sooner.

• Close the CRL button need to export report data

  Hello
  
  My users have complained that they need to press CTRL key when exporting report data have all a come across similar issue? What is the mark of the GET rid of this?
  
  Thank you
  Umeshwar

  My users have complained that they need to press CTRL key when exporting report data have all a come across similar issue? What is the mark of the GET rid of this?

  Please see these documents.

  File > export via IE browser closes after the end of toolbar [427555.1 ID]
  Browsers recommended for Oracle E-Business Suite 11i [ID 285218.1]
  Browsers recommended for Oracle E-Business Suite Release 12 [389422.1 ID]

  If you still have the same problem, thanks for posting the details of the version of the application, the database version and the OS. In addition, please post the client OS and browser and mention if the question with all browsers/users or specific ones only.

  Thank you
  Hussein

• A user to our small business reports that she one day noticed that the contents of its files to Outlook Express disappeared. Records are intact, but the messages have disappeared.

  Outlook express content of some files went

  A user to our small business reports that she one day noticed that the contents of its files to Outlook Express disappeared.  Records are intact, but the messages have disappeared.  Strangely, what happened to half of its files; the content in the other half is still there.

  She uses Outlook Express 6.

  Suggestions?

  Pamela

  In addition to comments of Bruce, likely OE compacted messages and in doing so, he probably wiped out the where they are absent.  Check your Inbox and message store bak files which are backups dbx files prior to compaction (see www.oehelp.com/OETips.aspx#2).  If you cannot find the bak files, then you will probably use the extract of the service drive of my DBXpress program (see www.oehelp.com/DBXpress/).

  Steve

• Why kobo users is more the ability to annotate words in the new kobo app?

  Original title: kobo app.

  Why kobo users is more the ability to annotate words in the new kobo app?

  NAV

  You must apply to the developer.  We support only of Microsoft products on this site.

• Essbase have the ability to automatically forcing a user to change their password after a 90 days

  Essbase have the ability to automatically forcing a user to change their password after a 90 days
  . 11.1.2 we have that, but coming to 11.1.2.3.500. I can't change this property under Essbase server. Shared with native directory services.

  any work around that?

  The workaround is to use an external directory as MSAD where password options are controlled at that level, recommend Oracle uses external directories for users on the native of directories.

  "EPM system supports native users, but I can use them in my deployment to production? Recommend the Oracle?

  Native directory allows you to create native development and test users; However, Oracle recommends strongly that you use users of the directory company in production deployments. This is because password policies are not supported for native users. In addition, after you use the native users for the development or test, Oracle recommends that you disable or remove them andalways use users in the corporate directory. »

  See you soon

  John

• I created a form to complete 4 page. I would like to place a button at the bottom of page 4 when you click inserts another copy of the form in the existing file. I have the user to have the ability to easily create muliple copies of the same 4 pages in

  I created a form to complete 4 page in Acrobat. I would like to place a button at the bottom of page 4 when you click inserts another copy of the form in the existing file. I want the user to have the ability to easily create multiple copies of the same 4 pages in a single file. It is possible with Acrobat? I use a PC.

  It is possible using models and JavaScript, but if it is to work with the player, users will need to use the desktop version (Windows/Mac) of 11 Reader or CD player. Here is a link to an older article which explains the basics: Planet PDF - a lesson in the templates for Adobe Acrobat

  Note that this is a bit outdated, but it should help you get started. If you have any other questions, post them in the Acrobat JavaScript here forum: JavaScript

• I bought the ability to convert PDF files into word documents. However, when I opened a PDF it does not include the right panel that had been giving me the option to convert. After spending 30 minutes on a cat, I learned that (1) the option is not on the

  I bought the ability to convert PDF files into word documents. However, when I opened a PDF it does not include the right panel that had been giving me the option to convert. After spending 30 minutes on a cat, I've learned that (1) the option is not on the right side panel on Acrobat 9 Pro, (2) it is on the top. What should I do to convert my files?

  Look at the file menu.