Automatic backup of data to labview

Similar Questions

• How to automatically backup the data table into a spreadsheet?

  I'll put up a test of 24 hours where I would like the data in the table came together to save automatically to a spreadsheet every 4 hours. Is there a way to set up with writing in the worksheet file.vi?

  Of course, you just need a timer that will tell you when the four hours are up.  Take a look at the attached timer, I picked up on these forums some time ago, but I don't remember who to give credit to for the TI.  Just use this timer to trigger structure case holding writing worksheet function.

  * It is from the flowery controls

• Automatic backup of data when users move to a different tab

  Hello

  We use Jdev 11.1.1.7.

  We got below the customer's requirement.

  We have a kind of registration requirement user where the user must enter the details in several tabs.

  After that the user enters data in a tab, and when he moves to another tab, automatically 1 Data tab should be committed to the database.

  He should not ask / restrict the user each time click on the button for each tab save.

  An option that I think is committed in the earpiece of the disclosure in each tab.

  What are the best approaches to achieve the performance impact.

  Looking forward for your valuable response.

  Thank you

  Disclosure is the only option I see.

  Just be careful with the listening port, because it may trigger twice: once for the open tab, once to close. So, you might want to make sure that you do not commit twice.

• PDM file with automatic backup on corrupts the data.

  When I test data stream into a file to PDM using AutoSave = true, data is corrupted in the 'package' #3 and beyond.

  I write matched double/DateTime data to a TDMS file configured as TdmsWaveformLayout.PairedTimeAndSampleChannels.

  When I try to read the PDM file, for example using the sample application to drive, I get all sorts of errors. Notably, the number of timestamps is not equal the number of samples (values y). More data is corrupted. In other words, the timestamps are invalid and the sample data is essentially random.

  This happens every time I write the third package/lot and beyond. If I write a single sample, followed by another single sample, the third will be corrupted. If I write 1 kilosample, followed by 1 kilosample, sample no. # 2001 will be corrupted.

  I guess that something is very wrong in the automatic backup routine, as data are always written correctly when I explicitly save the PDM file.

  It's using MS 8.9.0.246 in Visual Studio 2008 SP1 using .NET framework 3.5 SP1 on Windows 7.

  The TDMS file is created in the following way. Note that AutoSave is set to false to avoid the bug.

  TdmsFile f = new TdmsFile (tdmsFilename, new TdmsFileOptions (TdmsFileFormat.Version20, TdmsFileAccess.ReadWrite, true, TdmsByteOrder.Native));
  
  f.AutoSave = false; Must not be set to = TRUE because of a bug in Measurement Studio!
  TdmsChannelGroupCollection channelGroups = f.GetChannelGroups ();
  
  ChannelGroup TdmsChannelGroup = new TdmsChannelGroup (...) Unique ID...) ;
  
  channelGroups.Add (channelGroup);
  f.Save (); Needed when AutoRecovery is set to false.
  TdmsChannelCollection tdmsChannels = channelGroup.GetChannels ();
  
  foreach (IDicomInstance instance in series. Instances)
  
  {
  
  	tdmsChannels.Add (new TdmsChannel (string. Format ("{0} (time) ', for example.") Signal.Name), TdmsDataType.DateTime));
  
  	tdmsChannels.Add (new TdmsChannel (string. Format ("{0}", for example.) Signal.Name), TdmsDataType.Double));
  
  }
  
  channelGroup.WaveformLayout = TdmsWaveformLayout.PairedTimeAndSampleChannels;
  

  Every 10 ms, a double array [100] happens (with information in a DateTime table clock [100]). The data is stored in the file TDMS in a simple way:

  AnalogWaveform wf = AnalogWaveform. FromArray1D (sample. Data.Samples);
  
  WF. Timing = WaveformTiming.CreateWithIrregularInterval (sample. Data.Timing);
  
  WF. ChannelName = sample. Source.Name;
  
  WF. UnitDescription = sample. Source.UnitOfMeasurement;
  
  ChannelGroup = _tdmsFile.GetChannelGroup (... TdmsChannelGroup Unique ID...) ;
  
  TdmsChannel channel = channelGroup.GetChannel (... channel... name);
  
  channelGroup.AppendAnalogWaveform(channel, wf);
  
  channelGroup.Parent.Save ();  Needed when AutoRecovery is set to false.
  
  

  This is what the TDMS file looks like in the sample player application:

  

  For those who can run in it before we are able to get a fix on, a viable solution is to turn off auto-save and save the TDMS file any time a change to the file is made manually, such as after adding channels or groups, or write data.  This will not negatively affect performance, because that's exactly what the property of automatic backup.

  It should also be noted that this problem arises when you use the layout of the TdmsWaveformLayout.PairedTimeAndSampleChannels waveform.

  I'll post back later when we have a fix for this problem.

  Sorry for the inconvenience that this may cause,

  NickB

  National Instruments

• Can I automate creating a cluster in LabView using the structure of data created in a generated automatically. CSV, C header or XML file?

  Can I automate creating a cluster in LabView using the data structure created in an auto generated. CSV, C header or XML file?  I am trying to take the data structure defined in one or more of these files listed and have LabView automatically create a cluster with structure types and the same data.  (Ideally, I would like to do it with a C header file only.)  Basically, I'm trying to avoid having to create the cluster by hand, as the number of cluster elements could be very large. I looked in EasyXML and contacted the rep for the add-on.  Unfortunately, this feature was not created yet.  Did anyone done something like this before? Thanks in advance for the help.

  
  

• Behavior of abnormal (Tag Date and place of automatic backup) RMAN script

  Hi all
  
  I have 11 GR 1 material running on Sun SOLARIS 10.
  
  The parameter default RMAN for backup of control file is on DISK (format: u02/oracle/backup/rman/control/%F.ctl)
  
  
  I have the RMAN script following (L0.rman):
  Run {}
  allocate channels ch1 type SBT_TAPE parms 'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt) ';
  tag backup "${CURRENT_DATETIME}" additional 0 filesperset 3 format 'DB_%T_%U.dbf' database more archivelog;
  output channel ch1.
  }
  host ' cp /oracle/app/oracle/product/11.1.0/db_1/network/admin/tnsnames.ora/u02/oracle/backup/rman/$(echo $CURRENT_DATETIME) /';
  
  
  This is called by the following (L0.sh) script:
  #! / bin/bash
  CURRENT_DATETIME = "$(date + 20 %y %m %d %H %M)»;) export CURRENT_DATETIME
  export ORACLE_SID = EDWH
  export ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1
  mkdir/u02/oracle/backup/rman/$(echo $CURRENT_DATETIME)
  RMAN nocatalog target / cmdfile = L0.rman log = L0_EDWH_$ CURRENT_DATETIME.log
  
  
  The anomalies are as follows:
  
  1. the backupsets are created with a literal tag "${CURRENT_DATETIME}" instead of "201010051915" - why?
  FYI, the command 'host' at the bottom of L0.rman successfully copies the file in the right directory (/ u02/oracle/backup/rman/201010051915 /).
  
  2. after the backup finishes, the automatic backup for the control and spfile is taken on SBT_TAPE instead of DISK - why?
  
  Any help will be appreciated.

  1. well, this $CURRENT_DATETIME is variable shell, RMAN does not interpret it (she can't and doesn't have to.) HOST calls the external commands by spawning the shell in non-interactive mode and when placing the order for her, and since you have exported the variable is available to all processes having engineered and develop properly, then files are copied in the expected location. If you remove the '; CURRENT_DATETIME export"from your shell script, you will see files copied in/u02/oracle/backup rman / / because the variable will not be in the environment of the layed shell (it will be local to the script) and will expand to the empty string. You must pass $CURRENT_DATETIME to the RMAN script as a variable substitution so that the shell expands it before calling RMAN, like this:

  L0. RMAN: {code}
  Run {}
  allocate channels ch1 type SBT_TAPE parms 'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt) ';
  backup format tag & 1 extra strength 0 filesperset 3 'DB_%T_%U.dbf' database archivelog;
  output channel ch1.
  }
  host ' cp /oracle/app/oracle/product/11.1.0/db_1/network/admin/tnsnames.ora/u02/oracle/backup/rman / $ CURRENT_DATETIME /';
  {code}
  L0.sh: {code}
  #! / bin/bash
  CURRENT_DATETIME = "$(date + 20 %y %m %d %H %M)»;) export CURRENT_DATETIME
  export ORACLE_SID = EDWH
  export ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1
  mkdir/u02/oracle/backup/rman / $ CURRENT_DATETIME
  RMAN nocatalog target / cmdfile = L0.rman using $CURRENT_DATETIME log = L0_EDWH_$ CURRENT_DATETIME.log
  {code}

  Note the * & 1 * variable substitution in the RMAN script and * using * keyword in the RMAN command line.

  2. control file record is taken to the same media, that the last backup, this is normal. You can't "CONFIGURE CONTROLFILE AUTOBACKUP ON the DISC" or something like that, you can only enable or disable it and specify format for various types of devices. Default device type does not play here, you are precisely the configured default device type substitution tape backup.

• after update, the Favorites have disappeared. There is no automatic backup in the last 2 months. under the restoration, it gives me the possibility to restore until today.

  all of a sudden I have no Favorites.

  I read to all bookmarks, clikc backup and restore, restore and it will list the last 10 backups. the only listed backup is starting today, and no bookmarks are added when I restore

  I also saw to look on the desk in the old firefox files... most recent automatic backup was 2 months ago... it's too old

  I can't find the latest bookmarks files

  If you haven't tried stopping and restarting Windows because this problem occurred, I would suggest trying it. Some users have reported a problem after the updates of Windows where they see only partial information in Firefox, perhaps because of a problem of privileges.

  After that, if the problem persists, I'll ask you to verify a parallel settings folder. You can open the settings file (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Make a note of the name of the current folder in the Windows Explorer address bar, and then click the 'profiles' word that appears before him to navigate a level and see if you find other profile folders here. If you check the inside, a folder bookmarkbackups in other profiles appear to be current?

  IMPORTANT: Do not use Windows System Restore feature — which can cause loss permanent data.

• Big Bill - is automatic backup of iCloud the cause?

  Bill last month was $600 US for iPhone 6 s daughter. Use FaceTime on average once or twice a day. She uses uTube several times (short) a day for his 16 month boy manageable when changing layers or him in the car seat or to occupy his attention when she has to do something that requires his full attention momentary. She takes several photos and short videos, two or three times a day. It has 64 GB of storage and storage in iCloud. The phone company blames iCloud through its automatic backup function. Each additional GB of data that it uses on its allocation of 8 GB about is charged at $7.50 American. Last month, she used more than 70 additional GB. I want to reduce this cost. The answer phone company is that they cannot do anything, it's the Apple phone that's to blame. Is it true?. One of the problems is that we have is that she doesn't have a computer apple, just an iPad. She can not save on my computer so if I bought a computer would be backup on which eliminates the automatic obligation of the automatic backup of the installation iCloud?. Sorry for this question long but I'm desperate to reduce the monthly cost on his phone. The other two iPhones that we must work normally, but then none of us have 18 months to deal with.

  iCloud backup will only take place on the wifi is not back ups that are running with the cellular provider bills. Besides that, generally, they will be much smaller that any movie she is watching tube you.

  One way to reduce the cost would be to stop doing the things she does until she can do so via wifi.

  I must say tho 70 GB is a lot for a phone.

• automatic backup

  Is there an automatic backup feature in Firefox? If so, keep - you there different versions?

  I had to restore my PC. Once I did, I logged on my account of Firefox assuming it would sync my previous Favorites and passwords, but synchronize empty profile instead.

  Fortunately, I still had most of the things in Chrome, but unless there is an automatic backup feature, I don't want to be in this situation again.

  Kindly let me know if such a thing exists.

  First, if you haven't already done so, you can disable the cache of the hidden files and folders. This article has the steps for Windows 7, which I think are similar on the 8.1 Windows: http://windows.microsoft.com/en-us/windows/show-hidden-files

  Then, you can down

  Your username\AppData\Roaming\Mozilla\Firefox\Profiles C:\Windows.old\Users\

  Here you can find a profile semi-randomly-named file, or you might find more than one. Most likely, the most recently updated the folder is the folder of the previous settings.

  You could move some key files selectively into your folder of currently living settings, or restore the entire record of the old settings.

  For selective restore, see this article: recovery of data from an old profile.

  For the steps to restore full, please see this thread: https://support.mozilla.org/questions/1024189

• Automatic backups made in libraries that are not yet open?

  I'm familiar enough with FCPro X (using the latest version 10.2.3) but I saw something for this, I don't really want.

  I hope I'm wrong!  That's why I write here

  When we are editing in a library, FCPro is automatic backup library every 10 or 15 minutes or more. (Don't know how many times, but not important here.)

  It's a good idea that Apple did this.  Always nice to have automatically saved versions.

  But what I found, is if we said, 10 different projects, we are working on--which means 10 different libraries on our hard drive FCPro creates these libraries for backup automatically on all 10 libraries!  Even if we have not opened a library for 6 months, it still gets automatic backups!

  Sometimes the backup of the library can be 30meg, or so, if we are changing for 3 hours - find us in each of the 10 libraries there are several automatic backups created - even you of course, nothing has changed in the library!  Maybe 8 of the 10 have not yet opened and yet in the "Final Cut Backups" folder, there will be a few hundred meg of backups automatically: of course it must, because backups are in libraries, we haven't yet opened!

  I know not how to disable this feature - so FCPro stops auto - and we can do separately in each library - but that's a lot of extra work, remembering that libraries are "automatically backup" and which are not.

  I guess I want to come is that we would like FCPro continue to automatically back up the libraries that we change in French - but I'm correct that it also backs up the libraries that we don't even open using hundreds of megs of useless data.

  All I want is the feature of works as is, but only when opening a library - NOT in others who have not been affected.

  I am writing to be sure I understand it.  This doesn't seem to be the case?  Is there a way to tell FCPro (not for each library separately) only to make automatic backups in I work in libraries?

  Thank you for reading this... what I hope I am WRONG!  And there is a workaround or something?  It's just a nuisance to have to remember to turn on all the automatic backups on 'OFF' of each library - but then activate it when you work on 1 or 2 - and then turn them off again.

  Any thoughts?

  Thank you

  Larry

  Larry Cohen wrote:

  If we say, 10 different projects, we are working on--which means 10 different libraries on our hard drive FCPro creates these libraries for backup automatically on all 10 libraries!  Even if we have not opened a library for 6 months, it still gets automatic backups!

  Sometimes the backup of the library can be 30meg, or so, if we are changing for 3 hours - find us in each of the 10 libraries there are several automatic backups created - even you of course, nothing has changed in the library!

  All 10 libraries appear in the library list? If they are, why not close those that you don't need for this session?

  That said, I never had what you describe. Where these libraries are stored? Is the drive (or drives) in the OS X Extended (journaled) format?

  Russ

• Can I import my Firefox bookmarks from an automatic backup to a new MacBook Pro computer?

  I backed up my MacBook Pro 11 OS X Lion with Time Machine system and then got a new MacBook Pro 13 OS X Mountain Lion system. I can't use Time Machine to restore my system. I was able to drag and drop my files, but I forgot to backup my Firefox bookmarks HTML. Are automatic backups .json accessible Firefox for me on my external drive for Time Machine? Can I find one of these backups and restore it on my new laptop? I did not all new bookmarks, crushing would not be a problem.

  Have you already found the Firefox profile folder in this Time Machine backup?

  • < User > /users//Library/Application Support / Firefox/Profiles/< profile >.

  In Mac OS X v10.7 and later versions, the file $HOME/Library is a hidden folder.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• Implement TC as just an automatic backup

  I used TC as a router and back until I changed my ISP and they provided their own router.  Now just have to use the TC as an automatic backup, I'm having problem setting up.  Can I connect the TC by wireless to my new network of woman?  The TC or the laptop means network initial when the TC was also the router then how can I wipe the TC (data are old) and start from scratch and how can I do this?

  Can I connect the TC by wireless to my new network of woman?

  Sorry, but no. The TC must connect to the ISP router with wired Ethernet wired, permanent. Connection of one of the ports on the router ISP LAN <>- to the "O" on the TC WAN port.

  If you want your backups to be officially supported by Apple, you have to back up by using the wireless TC, or by connecting your Mac directly to CT using a wired Ethernet connection.

  Know that it is possible that you pourriez be able to save on time using the ISP wireless Capsule... but the downside of this is that it will no help from Apple's Support if you use this method for backups.  So your call on that.

  
  

  How can I clear the own TC (old data) and start from scratch and how can I do this?

  The method for doing this varies depending on the operating system you have installed on your Mac.

  Do you know what operating system you currently have installed on your Mac?  Otherwise, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and poster on the Version of OS X number that you see there.

• My iPad is no longer the automatic backups in icloud. When I try to do it manually it gives me an error message

  Automatic backup on icloud no longer works. When I try to run it manually it gives me an error message

  Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

  You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > managing storage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

  Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

  Then, try to connect the device to a new location (different WiFi network)

  If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > BackUp), reboot the device and then turn on BackUp on new.

  If it does not help disable backup again, remove your existing back to the top of the settings > iCloud > storage > managing storage > backup > appliance (scroll down) > delete backup, restart the device and then turn on BackUp.

  If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

  The next thing to try would be to restore your network settings. (Settings > General > reset > reset network settings)

  Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

  If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do it with settings > iCloud > storage > managing storage > backup > this device > Back Up Options.

  If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

  Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

  More on v iCloud iTunes backup

• Beginner question the easiest way to create automatic backups for readynas from windows PC

  I just installed a readynas duo v1 to my router and wants to set up an automatic backup (uncompressed file copy) of my windows pc, and I am new to the use of the nas and raid.

  Can I map nas as a disk on my pc and then I don't know how to proceed.

  Any help would be appreciated.

  I was not able to reset password admin I need help there too.

  Thank you

  Thanks to those who tried to help me.

  I decided to buy acronis and use it to back up data on the readynas.

• accelerate the backup of data received through series

  Hello

  I hope you can give me some advice. So far, I have not found a solution.

  I have a sensor connected by USB-serial converter to the computer (COM 2). After the beginning of the measure, the sensor sends continuously data as a string. The sensor is able to operate at different speeds and it is controlled through strings sent to the device.

  Now, I have programmed a small piece of code to read and evaluate the data from the sensor. There is no problem while looking at live data in several locations. But as soon as I try to save the data, I have speed issues. The loop is not fast enough to receive the data, because it is provided by the sensor. Temporarily remove the plots and so on, don't help not, therefore the problem is data backup. As far as I know, I should use the tables that I did and I don't think that editing bays should be the bottleneck, because they should be able to manage data in general much faster.

  In the Hyperterminal with windows, the unit works fine.

  I use VISA series with a timeout of 2 s and a buffer of 128. Baud rate is set to 460800.
  The real VISA read command is set to read 50 bytes max or stop a tank of termination (line break).
  After initialization, and sending the command start for the sensor, the device starts to send its data...
  The different speeds are:
  1 - 4 strings per second
  2 - 10 per second
  3 - 100 per second
  4 - 500 per second

  Each line gets cut, evaluated and plotted. Each value is also stored in a table (which could be saved after the program stops).

  In the photo, I deleted several commands sent to the probe, because they are not relevant and it doesn't matter (of failure) if I remove them in the program or not. It goes the same for plots. After setting the device at the higher speed, the program fails, because there is more data than labview bed. (I have already said, that without the tables it works very well, I do not have it?).

  So, what can I do? I'm doing something completely stupid? Is there a faster way to collect data with labview? I mean, 500 HZ, which must be nothing.

  Thanks for your help.

  Kind regards

  HD

  PS I'm continues LabVIEW 8.6

  Computer: Intel Core2 Duo E8500 3.16 GHz with 3 GB of RAM

  SW: Windows XP SP3

  You use insert into table with each iteration and forcing LabVIEW to keep reallocation memory for the berries. It is not very effective. Instead, I advise you to use the architecture of producer/consumer and transmit data back to the consumer loop where you write the data. Shift registers and who would skip all the functions to insert it in the table. You also use local variables and property nodes. Neither one of those who are very fast either. Can't tell from the picture why those are used. Also, consider using a structure of the event for these Booleans wired for the structures of the case. Do you really need those who questioned all the time and run the code with each iteration, or do you just need them to run once when the Boolean value changes?