Automatic calculation of the budgetary cost

Similar Questions

• Realizing automatic calculation in the form field Oracle Apex.

  Hi all

  I m facing a problem in my Apex Application.

  I have three ActualAmt, CommAmount, and Comm % fields in my form.

  My requirement is when % ActualAmt and Comm is entered then automatically CommAmount should be calculated on the basis of ActualAmt and Comm %, in the second case, when I enter ActualAmt and CommAmount Comm % should be calculated on the basis ActualAmt and Comm %.

  I have included my formula in Post calculation calculation but does not.

  
  

  Please help find the solution.

  
  

  Concerning

  Thanks, Mindmap, it worked.

• Dynamic action to email from automatic calculation of the fields in the form created in the APEX firstname and lastname

  Hello

  I am working in the form based on the employees table. I have email_id (P169_EMAIL_ID), last_name(:P169_LAST_NAME) and 3 fields/items first_name(:P169_FIRST_NAME). I am trying to create a dynamic action Auto Fill the id field of electronic mail with the email ID immediately when the user enters first name and family name, he clicks on the e-mail id field. Please help me with suggestions for the code I should use in dynamic action. For example, if a user enters rakesh in the first name field and choudhury to registered name the by clicking the id field e-mail should automatically show [email protected]

  Thanks in advance!

  Hello

  957450

  You need to change your name to something more appropriate

  I work in the form based on the employees table. I have email_id (P169_EMAIL_ID), last_name(:P169_LAST_NAME) and 3 fields/items first_name(:P169_FIRST_NAME). I am trying to create a dynamic action Auto Fill the id field of electronic mail with the email ID immediately when the user enters first name and family name, he clicks on the e-mail id field. Please help me with suggestions for the code I should use in dynamic action. For example, if a user enters rakesh in the first name field and choudhury to registered name the by clicking the id field e-mail should automatically display [email protected]

  You can use a DA to set the email in the agenda of the Email page when there is a change in the maybe the first name of the person if it follows in the order you presented above.

  E.g.

  Event: change

  Point: P169_LAST_NAME

  Action: Set

  Fires when the event is the result: true

  Parameters

  Set tYpe: PL/SQL body Funtion

  declare
  l_email varchar(40);
  begin
  l_email := :P169_FIRST_NAME||'.'||:P169_LAST_NAME ||'@oracle.com' ;
  return l_email;
  end;
  

  Page items to submit: P169_FIRST_NAME, P169_LAST_NAME

  Items concerned:

  Article: P169_EMAIL_ID

  NB: I recommend that you look at the dynamic Actions of the sample under the application package.

  Hope this helps

  Kind regards

  Benjamin.

• Why the Total cost in vCAC is Blueprint cost + cost of profile?

  one thing I noticed in end-user vCAC, it shows (Blueprint cost + profile of cost) everything by asking the service to the service catalog. Why is it so? why he is planning costs for the calculation of the daily cost?

  Cost of resources (don't) take in things account as an operating system and software licenses. These you configure at the level of the action plan, and then they are combined to provide an indicative cost for the user at the time of the request.

  Grant

• How to implement the automatic calculation is Visual Studio (I'm new to VS)

  IM new vb and I wondered how I would do automatic calculation in my application

  Here are my Apps UI (I wasn't expecting to get out that big)

  What I'm trying to do is

  1. number of nights * $55 = Total cost night

  2 total cost of night * 10% = load of Entreatment %

  3. total cost night + fresh entertainment % = Total Room (Night) and Ent. Fees

  4. total Room (Night) and Ent. Support + Service charge + phone = Total invoice

  All automatic

  I hope someone could please help me that would be great, if you have any questions please ask and I thank you in advance.

  

  Hi devils4ever30,

  I would repost among our developer audience in the Visual Studio forum:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Thank you!

• I would like to know when my 1 free trial of adobe Creative Cloud monyh ends to not be automatically loaded with all unnecessary costs. I can't find all the dates when the site followwing steps suggest...

  I would like to know when my 1 free trial of adobe Creative Cloud monyh ends to not be automatically loaded with all unnecessary costs. I can't seem to find a date when followwing steps of the site suggest...

  Hi Sarah,.

  You will not be charged after the end of the trial.

  Once the trial was over, CC app would invite, allowing you to purchase the subscription to continue using creative Cloud applications.

  Kind regards

  Rahul

• Note: The settings for this page are automatically saved in the Web browser cookies.

  I have a printer of C311a e-all-in-one HP Photosmart 7510.  When you look at the section of customizing built-in browser page printers, at the bottom of the installation of the list can be found this message:

  Note: The settings for this page are automatically saved in the Web browser cookies. If the Web browser cookies are deleted, these settings are lost.

  I would like to the file name for this cookie and can then ensure that this cookie is excluded from cleaning in the various tools that I could use for basic maintenance.  Thank you.

  I suspect that you gave me perfectly fine information.  However, given that this cookie file is not on my machine, determine why would come next.

  In fact, given the costs associated with this effort, profit generated over the lost time and possible third party website access to this particular cookie. all dictate that I have overcome this effort - for now.  I don't respect the time you have invested in answering my question, placing me in your debt in at least a couple of beers.  I want to thank you for the information provided.

  Mark

• automatic calculation of new line is not fire

  I have a table, when I add new lines, then automatic calculation is not fire.

  Page edit >code to run when the Page loads

  $('input[name=f04]').change( function(){
    parent_row = $(this).parents('tr:first');
    sal = ( parent_row.find('input[name=f04]').val() == ' ') ? 0 : parseFloat(parent_row.find('input[name=f04]').val() );
  //  comm = ( parent_row.find('input[name=f08]').val() == ' ') ? 0 : parseFloat(parent_row.find('input[name=f08]').val() );
    total = sal * sal;
    parent_row.find('input[name=f05]').val(total);
  });
  

  workspace: ram_r & d

  username/password: aramani/apex

  App: https://apex.oracle.com/pls/apex/f?p=29288:1:6747878971079:

  That's because. change() is an affair of a Manager on the only existing items. The event must be implemented in such a way that it fires for each element, existing and new. You can do so using. on() with specifying a container element manipulation. http://API.jQuery.com/on/

  For example:

  $(document).on('change', 'input[name=f04]', function(){
    parent_row = $(this).parents('tr:first');
    sal = ( parent_row.find('input[name=f04]').val() == ' ') ? 0 : parseFloat(parent_row.find('input[name=f04]').val() );
  //  comm = ( parent_row.find('input[name=f08]').val() == ' ') ? 0 : parseFloat(parent_row.find('input[name=f08]').val() );
    total = sal * sal;
    parent_row.find('input[name=f05]').val(total);
  });
  

  Or just use a dynamic action and define the scope of "dynamic". Just as clean. Instead of "this", you use "this.triggeringElement".

  

  Interesting help on the "scope of the event:

  This is an advanced property allows you to specify the scope of the event. The options are:

  • Static (default) - bind the event handler for the triggers for the lifetime of the current page, but it will be linked is no longer if the precipitating elements are updated via partial refresh (PPR) Page.
  • Dynamics - bind the event handler for the triggers for the lifetime of the current page, including all the triggers that are re-created through the Page partial refresh (PPR).
  • Once - binds the handler for the elements for a single event triggers.

  And static container:

  You can improve the performance of dynamic Action that has an 'extended event"of"Dynamic", by defining a container 'Static '. It is an element on the page that itself does not get recreated, but contains triggers that are re-created via partial refresh (PPR) Page. This reference of the element must be defined as a jQuery selector.

  For example if you have a dynamic Action that does something to the lines of an interactive report region (which are re-created by PPR), it would need a 'Scope event' 'Dynamic', so that the dynamic Action to work once again, the report has been updated. And here, the 'Static Container' value can be assigned to a jQuery selector, select the static value of 'ID' in the region, for example: "#my_region."

  Who all described fairly well what was written on the jquery documentation, too.

  This is the code for the actual action of "Execute javascript code:

  parent_row = $(this.triggeringElement).parents('tr:first');
  sal = ( parent_row.find('input[name=f04]').val() == ' ') ? 0 : parseFloat(parent_row.find('input[name=f04]').val() );
  //  comm = ( parent_row.find('input[name=f08]').val() == ' ') ? 0 : parseFloat(parent_row.find('input[name=f08]').val() );
  total = sal * sal;
  parent_row.find('input[name=f05]').val(total);
  

  I edited your page to use the dynamic action and put your original code in the comments on the page.

• Calculation of the cardinality.

  Hello

  Selectivity is the fraction of rows in the rowset that meets the requirement of predicate.
  It can be calculated as the inverse of the number of separate in the column lines, if the distinct values in the column are distributed evenly.
  If the distinct values in the column are not distributed evenly then optimizer search histogram for selectivity.

  
  Cardinality refers to the number of rows in the rowset.
  Can it be calculated as selectivity * num_rows in the table/column?

  
  In the Bitmap Index.
  We used to create indexes of bitmap on a column, whose cardinality is low.
  Here the cardinality can be calculated by:-num_distinct_rows/total_num_rows

  
  My question is, what is the difference between the cardinality of the optimizer and the cardinality based on which the Bitmap index is created?

  Thank you

  The total number of lines is not a parameter

  That's a setting BOTH the 'hand' two parameters to determine the selectivity and the determination of costs that will determine if an index can be used or not.

  1 - total number of lines to select

  2. total number of lines to select the

  Oracle decide NOT to use an index just because the result may contain 1 million rows. But if the table has only 1 million lines then it can get these lines by using a full table rather than an index scan.

  Or if the table contains rows 1 billion so the index will be suddenly much more attractive.

  As part of a 1 million line table the term 'little' may not apply if you're talking about 1 million rows. But 1 million lines is indeed "little" in the context of this 1 billion row table.

  That's why I said the word 'little' has little or no sense. There must be a meaningful 'context'

  And when the glossary speak of a threshold of 1% in the "degree of cardinality", in my humble OPINION both the term and the definition is wrong.

  Sure - this 1% threshold ' part is bad, but it is related to the bitmap index and has NOTHING to do with the definition of the degree of cardinality provided.

  Not to argue with the basic premise - just try to clarify things a little.

• -How the calculations on the Apex?

  I have 2 tables: A and B. A is related to B with 1:m relationship.

  Table stores the information about the quote - name, address, total cost of construction quote.

  Table B stores the list of services for a particular quote (linked to table A) - as the service quote (bathroom, kitchen, roof) , cost of the service, etc.

  There is a way to calculate the total cost of the "cost of service" column in table B, by editing 'report attributes' and checking the sum.

  But how would have received this amount (for the cost of each service on table B for a particular quote) to be displayed in the 'total price' field on the table?

  Surely, there must be a way to link them together.

  I have to do it outside of the Apex on SQL?

  Newbie.

  Here is the picture to help you understand

  

  I think that some (maybe pl/sql) sql calculation is required in the source box. Maybe I should do it on sql first. I need advice on how to do it.

  

  How about this, you will need to use the Q_QUOTE_ITEM fk

  Select sum (PRICE_QOTD) from Q_QUOTE_ITEM

  where Q_fk_quoteno =: P7_QUOTE_NO

  There is no 'total price' field for the moment so im using notes on Q_Quote.

  you mean an item of type "View only" to display the total?

• Help with automatic calculation field

  
  I'm doing a form to include an automatic calculation for feet cubes (Lxwxh/1728).

  Even if this is possible in the simplified field notation I need to automatically round up for and decimal point. I tried to use the custom calculation script, but I have no experience with java.

  Event.Value = Math.ceil (this.getField("LENGTHRow1").value * this .getField ("WIDTHRow1") .value * this 1728/d("HEIGHTRow1")) .getFiel;

  It's like I had with Googling but I believe that there is some sort of error with the calculation. I would be very happy if someone can show me what should be the script.

  You are missing the part 'value' after the second getField command.

• Calculation of the multiple service in PDF format

  Hello

  I have created a form for a day trip from part that calculations of costs with food and private vehicle mileage.  I would like to create a named calculation that adds these costs together with the miles flown multiplied by the kilometric rates.

  The calculation I need is:

  BreakfastRow1 + LunchRow1 + DinnerRow1 + (KmsRow1 x RateRow1) = Total

  FOR EXAMPLE: $10 + $12 + $15 + (100 *. 45) = $82.00

  I am new to PDF forms and scripts and master only the calculation option "is of value.

  Thank you

  Michelle

  Go to the properties of the Total field and tab calculate enter this formula as the 'Simple field Notation' option (the other):

  BreakfastRow1 + LunchRow1 + DinnerRow1 + (KmsRow1 * RateRow1)

• Automatically fill in the days of the week in a single field

  I am trying to add a script that is automatically filled in the days of the week in a single field. I have an example script that will populate the fields of today's date, but not what I'm looking for. I need the date to fill from an earlier date which came from a separate field. Any help is appreciated.

  Here is the script I hacked:

  var today = new Date();

  this.getField("sun").value = util.printd ("mm/dd/yyyy", today); fills the field for today

  this.getField("mon").value = util.printd ("mm/dd/yyyy", new Date (today.getFullYear (), today.getMonth (), today.getDate () + 1)); fills the field for Monday

  this.getField("tue").value = util.printd ("mm/dd/yyyy", new Date (today.getFullYear (), today.getMonth (), today.getDate () + 2)); fills the field for Tuesday

  this.getField("wed").value = util.printd ("mm/dd/yyyy", new Date (today.getFullYear (), today.getMonth (), today.getDate () + 3)); fills the field for Wednesday

  this.getField("thu").value = util.printd ("mm/dd/yyyy", new Date (today.getFullYear (), today.getMonth (), today.getDate () + 4)); fills the field for Thursday

  this.getField("fri").value = util.printd ("mm/dd/yyyy", new Date (today.getFullYear (), today.getMonth (), today.getDate () + 5)); fills the field for Friday

  this.getField("sat").value = util.printd ("mm/dd/yyyy", new Date (today.getFullYear (), today.getMonth (), today.getDate () + 6)); fills the field for Saturday

  I know quite dangerous - so maybe that I don't have.

  Thanks for your help.

  ~ C

  You can use the opposite of "printd" to analyze a text representation of a date and convert it to a date. See here for documentation:

  http://help.Adobe.com/LiveDocs/acrobat_sdk/11/Acrobat11_HTMLHelp/wwhelp/wwhimpl/common/htm l/wwhelp.htm?context=Acrobat11_HTMLHelp&file=JS_API_AcroJS.89.1260.html

  All you need to do is replace the first line of your code, where you set and the value of the variable today with a routine that initializes the date from field data. In the simplest form, this may like this:

  var someday = util.scand("mm/dd/yyyy", this.getField("TheDate").value);
  

  Then, you would just use the variable 'someday' instead of 'today' in your code.

  Remember that this complies not any error checking, you can add a control to "Survive" actually containing valid data, so that the calculation of the other fields, you can jump in case you have for example a string empty, or at a date not valid.

• automatic calculation of calendar

  Hey there,

  I made a calendar of various TV-scripts, sort them, make banners. everything works fine.

  When I want to show informing him of the Shoot and end time, now there is no automatic calculation. Yes I have scene od an dthey are indicated in the annex. I can add the start time of shooting manually, but there is no calculation when I go on the Recalculate button. It is said to do, but the time go to 00:00 according to the entire program.

  Someone to help me?

  Kind regards

  He will be shooting duration column [column label: duration (Shoot)] for you to complete.

  

• Can I add a formula and automatic calculations in a form?

  We would like to put the calculations of formulas och autoomatic in our forms, is - it possible?

  Hello

  Sorry, automatic calculation is not supported on a form of FormsCentral for the creation of the form (i.e. When you create the form in the Design tab).

  However, you can add the formula in the table view responses for responses you collect, or PDF form generated by editing via Adobe Acrobat.

  Please write back if you have any other questions,

  Thank you

  Lucia