Cannot copy files with properties!

Similar Questions

• Errro message "cannot copy file: path is too deep.

  Inequality on the what, why, how do to the error message "cannot copy file: path is too deep." I would like to know the causes and possible prevention and or all of the information available on this issue. The problem occurs when copying large files and sometimes small files on external hard drive to the top.

  Even though the file itself may become a 9-character file name extension, it could be buried inside several files.  Thus, when you step on your external USB drive and it appears as, say, M: drive, the number of characters in the complete path to the file starting with "M:\. "and including all of the directories in the path to the file as well as the number of characters in the name of the file itself must not exceed 255 or Windows refuses to handle.

  Robocopy is a command line program.  You must type in the command from a command prompt window (start-> Run-> "cmd").  It works by accessing the file using a set of routines to copy the different library that does not have the limit of 255 characters.  A documentation file must accompany Robocopy explaining how to use it.

  Another method that might work for you is to take the folder that your .wmv file is in (or maybe both files above) and to temporarily move to the root directory of your external hard drive.  This shorten the path to the file and allow a normal copy of work.

  HTH,
  JW

• Cannot copy files from HD to CD by using wizard.

  Original title: not accessible - incorrect function.

  Cannot copy files from HD to CD by using wizard. Have been able to do for a long time. Without warning is no longer possible.

  Hello

  The format of the files you want to copy basically described what kind of files they are. Word documents, of .mpg, jpeg, etc.
  However, it seems that the problem is with the drive itself, not individual files.

  You happen to have any installed Roxio program? Specifically, Roxio Easy CD Creator?
  If so, you should remove this program, restart the computer and try again.
  I hope this helps!

• Cannot copy file: cannot read the source code or drive WINDOWS XP

  I'm trying to transfer pictures on my old XP computer on an external hard drive.  After performing a backup on the drive hard seagate WD I went looking for pictures on the external hard drive, and they aren't there.  I went back on the XP machine and tried to copy the files to a CD but I get the message cannot copy file: cannot read the source code or the player.  I can open images but cannot move it to another folder or copy and paste pictures anywhere.  The photos are saved in an outdated version of microsoft's digital imaging software.  Help, please.

  Hello

  (1) is the specific question of the images?

  (2) where the images are on the computer?

  You can try the following methods and check the status of the issue.

  Method 1:

  Configure the computer to clean start State to check software conflicts. See the following link on how to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 4 of the above article.

  Method 2:

  If the problem is specific to the pictures folder, then it might be a problem with permission. You can try to take ownership of the folder and check if you can transfer it. read the following article.

  How to capture a file or a folder in Windows XP?

  http://support.Microsoft.com/kb/308421

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Win XP Edition family service pack 2 'cannot copy file ".

  When you try to update to service pack issues 2, then 3, I get always the same, the Setup program cannot copy the file... After recently trying to update my computer XP home plant and installation of service pack 2, I came across the following issues.

  "Setup cannot copy file 'nslookup.exe'" follow by "Setup cannot copy the file"winlogon.exe"

  leaving 'Cancel' as the only choice the program then deletes all the installation files, crashes and gives me no alternative but to re - install windows.

  Is there a simple solution to this problem? I am sick and tired of not being able to properly update and reinstall windows. the only time where service pack installed successfully he eventually make my useless Control Panel.

  Aaron

  Error message during the "Complete Installation" when you try to upgrade to Windows XP: "Setup cannot copy the file.
  http://support.Microsoft.com/kb/915161

  FYI - problem solver Windows XP Service Pack 2
  http://winhlp.com/node/125

  TaurArian [MVP] 2005-2010 - Update Services

• Copy files with dasylab

  Hallo!

  I need a little help! I want to copy files by pressing a button in dasylab, is this possible?

  Another question:

  It is possible to discover if an external storage device is connected with dasylab?

  This is the reason why I'm asking you:

  I record data measured on the hard drive. For our customer, I need to back up the files on an external device. I want to back up these files by pressing a button.

  Maybe someone can help out me?

  Thank you very much

  Good day

  Hilby

  You can use the module of the Action to execute an external program, including a command-line copy command.

  The switch would then connect to the Action.

  The normal program of DASYLab cannot confirm the existence of a player. You can write a batch script to do all this and start using the plug-in Action.

• Cannot copy files to CD or DVD + RW drive

  I tried several types of disc but am find me suddenly unable to write / copy files on a DVD or a CD. I use a HP with XP desktop computer. This problem started last night. When I put in a disk, it reads. I clicked on properties, then go to AutoPlay. I choose, for example, a content type - I'll click on say, mixed content, and ok. Everything I do or choose here, it will not save. I hit the Restore Defaults and it does nothing. In Windows Explorer, instead of inscription on the list DVD + RW and whateer in car, it displays an image of a disc with the date and the E drive.

  Any ideas on how I can fix this so I can copy files to my DVD discs?

  Hello

  Try the steps below. Guilbert

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; Q316529

  Chyavan

• Cannot copy files in batches

  I use windows XP home SP3 with. Never had any problems until recently.

  In windows Explorer: when I select a bunch of files and folders, right click, copy, then try and paste somewhere else, I get the error "cannot copy. invalid access to memory location ".

  Copy of files at a time works fine.

  Can anyone help please?

  Hi drumaboy,

  1. did you of recent changes on the computer?

  2. the problem when you copy files or file at various locations on the computer?

  3. do you have security software installed on the computer?

  Method 1

  See the link below and run fixit tool, check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Cannot open files with Windows XP media center edition .exe

  Cannot open .exe with Windows XP media center edition files.  Computer Dell did not come with a rear disc

  Hi CLueking,

  1. what happens when you try to open any .exe (executable) files? You get the error message?

  2. you remember to make changes to the computer, after which the issue started?

  I suggest trying the Microsoft Fixit and/or manual steps from the following links and check if it helps:

  Diagnose and repair Windows files and folders problems automatically

  You receive an error message when you try to start a program that has the an.exe file name extension

  How to change or choose the program that starts when you double-click a file in Windows XP

  I hope this helps.

• Cannot copy file names that include the slashes, commas, etc.

  Hello.

  I am trying to copy files from my old Mac G5 tower (about 10 years).  But my copy fails with an error message when trying to copy a file name that includes a special character.  Is there a way to get around this?

  To clarify: when it runs in a file with special characters, it gives me the error message that the file name is too long or contains special characters.  The problem is that when I click 'OK' to confirm the error (not), the copy is aborted.

  Any ideas?

  Thank you!

  E. -.

  Oh!  Well I guess you will have to wait for someone with a Mac experience for you then help.  I do not have one.  I'm sorry.

  BTW, you should post your question on Apple/Mac forum.  Many experienced people who can help you.   Good luck.  :-)

• Cannot copy files in Vista to a flash drive

  I am running Vista on a Dell Inspiron 530 and have tried to prepare my pc for installation of Windows 7.  I looked at other threads on this forum with similar problems, but have not found all of this sounds similar to my situation.  I tried to copy files such as my work Lotus document, Favorites files and picture files on a 32 GB Sandisk flash drive to save them before making the migration to 7.

  First of all, I had set up and files on the flash drive and then copied the data from drive C by using the copy and paste commands.  A strange thing happened when I pasted the images and the Favorites in the files of the flash player that I had put in place for these data was that the system insisted on the creation of its own files for these two files even if I paste in the files that I install.  I had the time that deleting the folder empty two I had the installer and then rename the files that the system had created.  When I had finished I posted the content of each of these files and they all contained what I expected to see.  Then, I closed the window and going on to something else.  Later I returned a new is to look at these files, I had created on the drive flash and discovered that they were not there.  With the exception of two small files that included Sandisk on the disc, it was empty.

  I might add that one of the reasons why I have do this upgrade is because Vista goes into a 'blocking' occasionally, and forcing me to delete a running via the Task Manager program, or if a system reboot.  The system restore feature is disabled.  I am the only user of this system and it is not on a network.

  I would appreciate help to solve this problem.  Thank you

  You are quite welcome.

• Cannot open files with the EXTENSION of the PPT FILE

  I can't open a file with the following extension using PowerPoint ppt. The message below is what I get-

  The selected file is not a valid Microsoft PowerPoint file. It may be a file created by another program.

  Try by double-clicking the file in Windows Explorer to see if another program opens to it. If PowerPoint opens again when you double-click the file in Windows Explorer, it is possible that the file is not a PowerPoint file, but its extension has been renamed to be that of a PowerPoint file type registered (for example, .ppt, .pptx, .pps, .ppsx, .pptx, .pot or .potx) but the file is not a PowerPoint file.

  To determine which program can open the file, try one of the following:

  • Contact the original author (if known) to know what program you used to create this file. Then rename the file with the correct extension so that it can be opened by this program.
  • Try opening the file in other programs.
  • If you or someone you know, are very knowledgeable about software, review the file header in a text editor to determine which program can read the file.

  Another possibility is that the file has been damaged during transfer from another computer. Trying to transfer the file again.

  The file may be damaged. If you have a copy of the file backup, use it. It is not possible repair corrupted file.

  Hello

  see if this applies to your problem

  you don't say what version of Microsoft office powerpoint, you try to open it with

  read below link information saying that you have need of powerpoint 2010 or other programs listed for ppt file extensions

  http://www.FileInfo.com/extension/ppt

  	Microsoft PowerPoint 2010	Info
  	Microsoft PowerPoint Viewer	Info
  	Nuance OmniPage 17	Info
  	ACD Systems Canvas 12	Info
  	Corel WordPerfect Office X 5	Info
  	OpenOffice.org

  If you have an earlier version of powerpoint read this

  Install the compatibility pack if you want to open, edit and save documents, workbooks, and presentations that were created in newer versions of Word, Excel and PowerPoint. Scroll down to see the instructions and system requirements.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyID=941b3470-3ae9-4aee-8f43-c6bb74cd1466&DisplayLang=en

• Cannot open files with Photoshop CS6 RAW - Camera Raw

  Hi all

  I am trying to open. Files CR2 to a Canon 450 d on Photoshop CS6, as well as with Lightroom 4 but it does not work.

  I've updated the Adobe Camera Raw in its last edition (8.8), but in any case, when I try to open them, it appears the following message: it basically says that photoshop is not able to open the file, make sure that you have installed the latest Camera Raw and visit the link for more info...

  After the search for solutions on the Internet, I also tried to convert RAW to DNG files, but Adobe DNG converter says that the folder does not contain any RAW file, although they are all. CR2 files...

  I tried several times to many ways... Any help would be appreciated. Thanks in advance.

  

  Try another card and card reader. Also, be sure to try to use the Finder to copy files directly from your card to hard drive, if you aren't already. Using the software provided a camera to transfer has been known to corrupt raw files.

  Benjamin