automatic repair of Windows 8 could not repair your pc

Similar Questions

• error message: windows mail could not be started because another instance of it is still ongoing?

  "windows mail could not start because another instance of it is still running on YOUR computer." Pls. log off windows, and then restart windows Messaging. If the problem persists, save UR work and restart YOUR computer. The computer (Dell inspiron 531 s) that I had for 2 years and no has not given any problems trying to open windows mail until a week ago.

  Would appreciate your thoughts on how to fix this problem I continually have to close and restart.

  Thank you.

  In addition to Ajay has suggested, try to repair the database (www.oehelp.com/WMUtil/) and use its suggestions to determine which program is responsible for run Winmail on its own.  Also check 3rd party, such as antivirus, program interferences.  See www.oehelp.com/OETips.aspx#3
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  "windows mail could not start because another instance of it is still running on YOUR computer." Pls. log off windows, and then restart windows Messaging. If the problem persists, save UR work and restart YOUR computer. The computer (Dell inspiron 531 s) that I had for 2 years and no has not given any problems trying to open windows mail until a week ago.

  Would appreciate your thoughts on how to fix this problem I continually have to close and restart.

  Thank you.

• Impossible to uninstall itunes, Windows install could not be accessed

  I have been instructed by Apple to intunes uninstalling, then reinstalling to fix problems with my new ipod.  When I tried to uninstall I get error: Windows install could not be accessed... this happens when yu are runnng your computer in safe mode or the installation program has not been installed correctly.  I did the following:

  go to SERVICES and not restarted WIndows Installer - no chance.

  I changed Windows Installer manual to automatic

  I downloaded WIndows Installer 4.5.  Always the same error message when I try to uninstall.

  I need help!

  Hello

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  or try revounuinstaller for free

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• HP dv6 7214tx: windows Setup could not configure windows to run on this hardware

  Hello

  I know it has been posted similar problems before, but I still can't get on my instalation.

  I came to this point: during installation PROCESS, almost at the end of this message pop up "'WINDOWS Setup COULD NOT CONFIGURE WINDOWS TO RUN on THIS COMPUTER HARDWARE".

  My PC is: ENVY dv6 7214tx

  3rd gener. Intel Core i7-3630qm

  processor 2.4 GHz

  1 TB HARD DRIVE

  8192 MB DDR3 SDRAM

  Blu - ray optical drive

  Windows 8

  NVIDIA GeForce graphics card

  WLAN & Bluetooth

  I changed boot to the DVD - ROM option, SUPPORT of LEGACY enabled, disabled SECURE BOOT.

  What it might useful to you guys, it's the actual installation takes apx. 5 hours, then he came to the point of pop up window mentioned above.

  Do you have any suggestions please?

  Thank you very much

  .. .also even if this driver has been loaded to the top, another window pops up and says smth like "the driver is not signed, and it might not work.

  However, I let it install... I'll see

• HP Pavilion dv6-7028tx Enterta: Windows Setup could not configure windows to run on this hardware

  As I tried to reinstall win 7 on my laptop HP Pavilion dv6-7028tx, the competition, Enterta I received this message by win7 saying that «windows Setup could not configure windows on this computer hardwear»

  

  I did some research on this issue, it seems to be the lack of SATA drivers on my computer.

  Could you please tell me which intel SATA driver should I install to fix the problem?

  If this method does not work, then please can you me how to change the hard drive in AHCI or IDE BIOS setting?

  Thank you very much

  Hello:

  You cannot change the drive controller setting in the BIOS on any HP laptop consumers made in the last 5-6 years.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and support installation of W7 in the machine, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• Windows Setup could not configure windows to run on a hardware on this computer

  HP Pavilion Sleekbook 15-b023cl

  I tried to install Windows 7 on my computer for the last day and after several attempts the same error message. It is said: "Windows Setup could not configure windows to run on a hardware on this computer." How would I go about fixing this problem?

  Thank you

  Hello:

  I'm not sure that there is a 'one size fits all' answer to this problem, if you google the error.

  The most common solution is to try to install the SATA driver.

  Here is the link to the SATA drivers you need for your model. Download and extract to a usb flash drive.

  First file listed is for 64-bit operating systems.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22194&ProdId=2101&lang=eng&OSVersion... =

  Use the Drive Options - Advanced method to install and then select the option load a driver.

  If you check the box, only the compatible SATA driver is selected.

  See if it works.

• Windows Update could not be installed due to the error 2149842967 (KB958559-x 86.msu)

  Hello
  I am trying to install Windows Virtual PC and Windows XP mode on my computer toshiba laptop. The compatibility tool h/w PC said that my PC is h/w support, assisted virtualization (BIOS and processor support for virtualization extensions).

  I installed Windows XP Mode.

  I am trying to install Windows Virtual PC on my Tablet RTM of Windows 7 Enterprise Edition 32 bit and it fails with below:
  Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\WINDOWS\system32\wusa.exe" "C:\Users\vishalt\Downloads\Windows6.1-KB958559-x86.msu" ")
  
  I tried several options suggested as
  (a) restarts - did not work
  (b) netstop wuauserv, wicks, rename the softwaredistributionfolder, netstart these services (the two) and try windows complete update - windows update has started but I still couldn't install the KB958559
  (c) try cmdprompt in a high of UAC cmd window.

  I was wondering if there is something else that needs to be done to install this package KB.

  Thanks in advance
  Vishal-

  ... The link for Windows Module game and the registry size limit could not be tried because the links on these threads do not seem to work.

  I know. You will see that I asked a moderator to post a valid link for this thread.

  Have you seen http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/61e16760-a500-481e-a90c-9b933f0fced8 ?

  I'll keep you posted if I hear anything new. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 could not search for new updates code error C80003FA

  I just activated Windows 7. When I tried to update, I have "Windows 7 could not search for new updates C80003FA error code".

  Tried three times with the same result. Could someone, please?

  C80003FA ReadVerifyFailure - a read verification error occurred.

  1. What is the suite of security/antivirus installed?
  2 is a 3rd party firewall installed?
  3 - is an upgrade to another edition of Windows?

  Please click on the round of departure. In the search field type programs and files in wups2.dll

  Under programs right click wups2.dll and choose Properties, when the Properties window opens, click the Details tab.
  Version of the file and the product should be showing 7.4.7600.226
  Now do the same for c:\windows\system32\wuaueng.dll
  He, too, should show file version and product like 7.4.7600.226
   
  If the version is earlier than that, you will need to install the more recent Version of the Windows Update Agent.
  The easiest way to do this is therefore download and Save the Fixit found here - How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Run MicrosoftFixit50202.msi and choose its default mode.

  BUT, if the installed firewall antivirus/security suite or a 3rd party is causing the "reading check error" then the Fixit may/does not work.
  If this is the case, then Configure the system to boot after download and Save the Fixit.
  Then, run the Fixit after the reboot to clean boot state.
  Restart and Cancel the clean boot steps, restart again to normal Windows mode.
  
  NOTE: in the boot minimum state all the 3rd party firewalls will be disabled. When you run the Fixit either unplug the system from it is the network connection or make sure the native firewall of Windows 7 is now on by opening the control panel > Windows Firewall.

  Expert MowGreen Windows IT Pro - consumer safety

• My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  My genuine Window Vista could not search for the new update, or errors are: Code 80073712

  If you forget to say 'thank you '?

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821

  0 x 80073712 ERROR_SXS_COMPONENT_STORE_CORRUPT component store is in an inconsistent state.

  TaurArian [MVP] 2005-2010 - Update Services

• Error "Windows Media could not find a certificate to connect to the network" when connecting to a secure wireless network with WPA2.

  Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.

  Not Applicable

  Hi StheveOses,

  As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  (Works for Windows XP SP3 as well)

  I hope this helps.

• Windows Update could not produce the result page?

  Windows Update could not produce the result page.

  Hi RobertRaney,

  1. you receive an error message when you open Windows Update?

  2. have you done any hardware changes or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

  Hope the helps of information.

• Windows Mail could not be started because MSOERES. DLL is not found

  Original title: Windows Mail

  I use Windows Vista and I suddenly have the following problems, when I try to open Windows Mail, a message

  «Windows Mail could not be started because MSOERES.» DLL is not found.

  Also, I noticed that all my games of Microsoft Windows have disappeared at the same time, ideas? : Monty

  Hey Monty,

  Follow the suggestions below for a possible solution:

  Method 1: You can go ahead and perform a restore of the system to a point before the show, then check to see if that fixes the problem.

   

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

   

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

   

  Method 2: I suggest you perform a system of operating in Place Upgrade to Windows 7 and check if that helps. See the following link for upgrade on site.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

   http://support.Microsoft.com/kb/2255099

   

  Note: You can take backup of the data on an external hard drive that you can lose data when you perform the upgrade on the spot. It is essential to back up data even if you do an upgrade on the spot.

  Let us know the results.

• Windows could not install your (CEWL 1) not found driver software for your device

  After you download sony_tvupdate_2012_1158_ucf_auth

  A new folder will be created called sony_dtv026000066006_00000301

  Inserted UWA - BR100 and received the following:

  Windows needs to install driver software for your (CEWL 1)

  Locate and install driver software (recommended)

  C:\Windows\system32\new dev.exe

  Windows could not install your (CEWL 1)

  Check the support section for driver software

  Insertion of USB causes the following message: not found driver software for your device

  Hello
   
   
  I would suggest trying the following methods and check.
   
   
  Method 1:
  Tips for solving common driver problems.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems    
   
   
  Method 2:
  Download the driver on the device manufacturer's website and install on your computer by keeping the computer in a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

   
   
  You can also refer to:
  Update a hardware driver that is not working properly. http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

• I get a message stating: "Windows Installer could not be accessed. This can occur if Windows Installer is not installed correctly"HELP!

  I recently tried to install programs, and every time I get the same answer that Windows Installer could not be accessed.

  I recently tried to install programs, and every time I get the same answer that Windows Installer could not be accessed.

  Start with this tutorial from Microsoft Support:

  http://support.Microsoft.com/kb/2642495#top

  Another tutorial

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

  Past responses to this forum on the same topic:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/the-Windows-Installer-service-could-not-be/4153caff-17d0-4EB8-916F-33ad07f2be75?page=2

• Error code: 1601 Windows Installer could not be accessed during the installation of Turbo Tax 2009.

  I try to install Turbo Tax 2009 on a Dell Inspiron 530.  I get the message that Windows Installer could not be accessed.  I tried all the fixes I could find and nothing works.

  When I try to install install 4.5 Redistributable, a dialog box appears saying "the update does not apply to your system" no matter which I choose in the list to download.

  What is going on?

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  Try the repost in the Forum Vista programs at the above address.

  They will help.

  See you soon. Mick Murphy - Microsoft partner

• Windows Installer could not be accessed

  I looked throughout all message boards and help sites that I can find.
  Oh. The problem I have is that I can download all or what I want; I just can't install it. This is the message I get: "Windows Installer could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  I tried, but I think I'll just in circles. I even did the restore to how I got the plant. I bought my Windows Vista from Best Buy with her already configured and ready to go. I hope this is enough information for you to be able to help me; I'm crazy gong. I have not even could re - install my anti-virus. I'm a duck sitting here. Help! Please, I beg you.

  Dodimay says:

  I looked throughout all message boards and help sites that I can find.
  Oh. The problem I have is that I can download all or what I want; I just can't install it. This is the message I get: "Windows Installer could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  I tried, but I think I'll just in circles. I even did the restore to how I got the plant. I bought my Windows Vista from Best Buy with her already configured and ready to go. I hope this is enough information for you to be able to help me; I'm crazy gong. I have not even could re - install my anti-virus. I'm a duck sitting here. Help! Please, I beg you.

  On the Win32 worm virus warning - Conficker.B: you have probably turned off auto update.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP