Automatic start of Agent autonomous ODI12c on MS Windows

Similar Questions

• picked up on JBoss do not automatically receive the agent installation

  I installed the server hq 4.0 and agent and I have a jboss Server 5 current running on the target computer.
  usually when I start the agent, it will automatically detect that jboss is running on the target, but this time it didn't.
  
  no idea why?
  is jboss 5 supported by automatic discovery?
  How can I get that it will automatically record (id rather not add jboss manually)
  
  Thank you
  mast
  
  Post edited by: cronos4d

  Hello

  Yes, in HQ 4.2, it is supported. It could be argued by 4.1, I don't remember when it was introduced. However, I know that it is available in 4.2.

• How can I prevent all automatic starts iTunes?

  Hello

  Is someone can you PLEASE advise me how I can prevent ITunes turning prematurely gray?  It starts with persistence without asking for confirmation.  I want to be able to achieve is to prevent ITunes automatically start under ANY circumstances.

  I have already completed THE steps to ignore my IPhone and IPad and Itunes isn't in any login script (as far as I can see).   Something is always load up and leads me into the wall

  What seems to be incited ITunes at startup was a message saying that my Session of Apple (or something like that) had expired and I had to reconnect again...

  I found a solution a little backward... but I wonder if an Itunes update has restored this infuriating behavior and to make it worse, I remember not where I found the solution.

  Guidance would be MUCH appreciated.

  Steve

  Hacks to stop Bluetooth speaker to start iTunes-

  http://forums.MacRumors.com/ShowPost.php?p=19045335 & postcount = 4

  LincDavis August 2015 post - https://discussions.apple.com/message/28821151#28821151

• Bluetooth does not automatically start after start

  Hello

  I have a SONY VAIO with built in Toshiba Bluetooth. My bluetooth in the taskbar icon no longer appears when Windows starts. That's happened? I always start the Bluetooth manually in Control Panel... Help, please. How can I activate Bluetooth on starting again? Thank you very much.

  I don't know how it works on Sony laptop computers, but on my Toshiba BT application automatically starts when the BT module is enabled. In any case, try to define as suggested by the creation of shortcuts.

• iBooks automatically starts an audio book... How to stop? Help please - thx!

  ... When I plug Apple EarPods, helmet or an audio jack in my car, iBooks automatically starts an audiobook... it happens all the time when I want to just listen to a song or answer the phone! How to stop?

  Help please - thx!

  I have this problem as well on an iPhone 6. I went to Audible for listening to audio books, but iBooks keeps opening and automatic reading a book that I wasn't even listening when I plug in my headphones. Sometimes there is a delay, then I will listen to something on Audible for a few seconds, and then it stops and be interrupted by iBooks from. It is really unpleasant.

  I really don't want anything to play automatically when I plug my headphones.

• Application will automatically start

  I have a PC that runs an application automatically at startup and stops at Windows and the PC when you exit the application.  I checked the boot menu (one profile) and a few keys in the registry but found nothing.  Always the application automatically starts when it is started in Mode safe.  If not, where can I get?

  Looks like you need to run the free software "Autoruns".  It shows practically everything that runs at startup and gives you the ability to disable one of them.

  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902 >

  HTH,
  JW

• My usb ports and cd/dvd drive will be does not automatically start when everything is connected on the

  My usb ports and cd/dvd player will not automatically start when something is plugged on them have to start manually.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow method 2 in the link below and check if AutoPlay is enabled, a link: AutoRun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive: http://support.microsoft.com/kb/330135

  I suggest to fix the AutoPlay parameter by downloading the file below and check the results: AutoPlay Repair Wizard: http://www.microsoft.com/downloads/en/details.aspx?familyid=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en

• computer automatically starts in safe mode without prompting, a problem with your computer might be preventing Windows from start normally__

  computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• Automatically start Windows and automatically Windows Shutdown

  Is there a way to automatically start Windows on specific times of days and later, to automatically close again?

  I want to allow remote access to a computer on slices of specific times of the day and at the same time, outside of these time slices to have the computer off in order to save energy.

  Hi panayotis matsinopoulos,.

  You use a domain network?

  You may need to use a third party program to accomplish this task. Search the Internet for the software that will help you in this task.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I get MS Office Outlook to automatically start when my computer is turned on? I have Vista.

  How can I get MS Office Outlook to automatically start when my computer is turned on?  I have Vista.  Your help will be greatly appreciated.

  Start - all programs - start

  Nothing in this record to boot Windows. Drag the Outlook shortcut in
  This folder with the right mouse button and choose copy.

  --
  ..
  --
  "krisb1968" wrote in message news: 144f14c1-80f2-42f9-835a-d1febbeef4e0...
  > How can I get MS Office Outlook to automatically start when my computer is
  > turned on? I have Vista. Your help will be greatly appreciated.

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.

• Anyconnect installation will automatically start

  The following command will automatically start the download AnyConnect client on vistingloging in the page of vpn for examle 'vpn.company.com '?

  If this is not the case, what would be the best way to streamline the process. We do not use clientless vpn, so he didn't need the page other than for the client download.

  SVC request to enable default svc

  Hi Matthew,

  In fact this command works for this, you will need the AnyConnect PKG uploaded to the ASA.

  If you have not set up any bookmarks or any use of the WebVPN clientless, it will automatically ask the download of the AnyConnect, and Yes, you can use the FULL domain name to access on a browser.

  Configure authentication to least best practices.

  Please note and mark it as correct the post if this helped you!

  David Castro,

  Kind regards

• What file or a setting in the game engine automatically starts when you choose a plane, the engines are already started on the track.

  Microsoft Flight Simulator X

  What file or a setting in the game engine automatically starts when you choose a plane, the engines are already started on the track.

  Thank you

  Nick Satullo

  E-mail address is removed from the privacy *.

  Original title: Flight Simulator X

  Hi Nick,

  Please post your request in the Microsoft Flight Simulator forums and it would be better suited to the community of players for Windows. Please visit the link below to find a community that will provide the support you want for better assistance.

  http://support.Microsoft.com/GP/games-for-Windows

• How can I set a certain web page automatically start and open when I connect Windows?

  How can I set a certain web page automatically start and open when I connect Windows?  My company as a "Home Page" that I would like it to appear when I connect Windows.

  Hello.

  Yes, you can do it. The only way to do this is to create a startup items.

  STEP 1- Make sure that the home page is set correctly

  Second STEP- Creating a startup items

  How to create a startup items:

  1. Right click on the shortcut of browser (Internet Explorer, Mozilla Firefox, Google Chrome), then click on copy.
  2. Open the start menu, click all programs.
  3. Right click on the startup folder, click Explore.
  4. Right-click on an empty area of the Windows Explorer, click Paste shortcut.

  STEP 3- Restart the computer to apply the changes and see the effect

  Response to see if it helps.

• Computers, turn on and automatically start

  We have two computers, and recently, we have seen that when it is booted up the morning the other automatically starts up and starts.  How do I change this setting?

  It is not a Windows or a Windows security problem but a BIOS setting. Check the parameters of start-someone must have activated the network boot.