Computers, turn on and automatically start

Similar Questions

• Have a power shot Sd1400 IS. It turns on then turns off and automatically displays the E16.

  See the topic above.

  Hi ronsur,

  I'm sorry to hear that your SDSD1400 IS PowerShot displays an error message.

  Unfortunately, your device will require repairs to correct this problem. To configure the service, go to canonusa.com/repair.

  Once there, enter your model number, date of purchase and your postcode, then click 'Submit' to set up your repair.

• I get an erroe message - ink system failure - turn on and re start printer. HP 6500 E709a

  I cleaned the cartridge door and installed new cartridges - only the black does not print

  Thanks - I did everything you suggested - then tried and old print head I replaced last year, he allowed to print in black - so I ordered a new HP - which seems to be the problem.

• I disabled the automatic updates and it starts to turn itself on, W H Y?

  "WINDOWS XP HOME SP2 '!

  I have disabled the automatic update and it starts itself to spin, WHY?

  HOW DO I KILL IT?

  I want all the crud that microsoft that will come to me.

  Hi Gail,

   

  You run the computer as an administrator?

  Method 1: You can run the fixit available in the article below from the off-ramp of Windows Update and then check if it makes a difference

  How to configure and use automatic updates in Windows

  http://support.Microsoft.com/kb/306525

  Method 2: You can see the steps outlined in the article below

   

  How do I turn off the Windows Update feature in Windows XP

  http://support.Microsoft.com/kb/892894

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Note: It is not recommended to disable Windows Update, automatic update, you do not have to search for updates online or worry that critical fixes for Windows might be missing from your computer. Windows automatically checks for updates for your computer.

• My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
  the startup type, click on the pointer, and then select Automatic (delayed start)
  the service status, click start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Computer not start, screen black, I have to turn on and off several times (I have Vista)

  When I turn on the computer, you hear the sound that is running, but I get a black screen with a white underscore on the upper left. Click on keyboard and nothing happened. I must turn on and off several times and then I get the Windows Vista logo.

  If the 2 methods below do not work, you may have to reinstall Vista:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I get MS Office Outlook to automatically start when my computer is turned on? I have Vista.

  How can I get MS Office Outlook to automatically start when my computer is turned on?  I have Vista.  Your help will be greatly appreciated.

  Start - all programs - start

  Nothing in this record to boot Windows. Drag the Outlook shortcut in
  This folder with the right mouse button and choose copy.

  --
  ..
  --
  "krisb1968" wrote in message news: 144f14c1-80f2-42f9-835a-d1febbeef4e0...
  > How can I get MS Office Outlook to automatically start when my computer is
  > turned on? I have Vista. Your help will be greatly appreciated.

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

• I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that. In the ideal, of group policy or some ways to disable all the computers on the network

  I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that.
  In the ideal, of group policy or some ways to disable all the computers on the network

  Some info here (Group Policy)-> http://www.unidesk.com/blog/how-disable-firefox-auto-updates
  
  Above article refers to-> http://sourceforge.net/projects/firefoxadm/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Satellite U400-14 b turns off and now it won't start

  Hello

  just got a new Satellite U400 this week.
  Worked perfectly the first days, and then last night, it just turns off and now it won't start.

  I press the button and the row of lights beside him light up, but nothing happens that I n t even get as much as the Toshiba screen.
  I tried a lot of things. I left it plugged in all night, tried to take the battery and any results now.

  Little led lights on the bottom indicates that it is his stuffy, battery is white not orange when you press they light up only for a fraction of a second.

  The only thing I can compare it is too when a car won t start and you keep turning and turning the key, well in that case, pushing a button, and nothing happens, fans don t whir or anything...

  help please...

  Additional memory (RAM) has been installed? Try to remove a memory Module and try another memory location.

  If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.

• WiFi starts to turn on and off

  Every 15 minutes, my wireless starts to turn on and off repeatedly at a fast rate. I mean, it turns off and then over time offshore on a second and repeat this until I put the computer to sleep, then wake it back up. It of really annoying and makes the difficult to use computer.

  I have a mid-2012 13 "MBP El Capitan running.

  Here is a tutorial that can help.  http://www.switchingtomac.com/tutorials/OSX/MacBook-Pro-constantly-dropping-wire less-con You can also go to/network/advanced/airport system preferences and delete networks that you no longer use. Or swipe your preferred network in the upper slot. Make sure Remember networks this computer joined, is checked. Or you can remove and re-add your network. Reset router by unplugging for 10 seconds then restart him. Make sure the firmware on the router is up-to-date.

• Hi, my PC does not start, it displays a screen with lines and then turns black and that of it, can you help me?

  Hi, I have a Compaq Presario C700 no problems so far. It will not start when I turn it on the screen with criss cross lines and then a vertical black line, it turns black and then that's all. ? If I turn on and off for a couple of hours it starts? Can you please help.

  Hello

  Looks like a hardware problem. Contact the seller and the Compaq Support. As Compaq OEM
  is responsible for the functioning Windows and hardware.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/|

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Why wireless zero configuration service automatically stop and I start it manually?

  Original title: wifi Poblem in xp

  In Windows Xp wireless zero configuration service automatically stops and I start it manually I want to know why this service stopped automatically help me solve this problem

  Hello

  1. Did you changes to the computer before the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1:  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services: http://support.microsoft.com/kb/968682

  Method 2:  Also I suggest that you install the updated drivers for the network adapter on the computer by visiting the manufacturer of the network adapter and verify that it works.

  How to manage devices in Windows XP: http://support.microsoft.com/kb/283658

  Hope this information is useful.